Lukas Wunner bba047f158 wifi: mwifiex: Support SD8978 chipset ... The Marvell SD8978 (aka NXP IW416) uses identical registers as SD8987, so reuse the existing mwifiex_reg_sd8987 definition. Note that mwifiex_reg_sd8977 and mwifiex_reg_sd8997 are likewise identical, save for the fw_dump_ctrl register: They define it as 0xf0 whereas mwifiex_reg_sd8987 defines it as 0xf9. I've verified that 0xf9 is the correct value on SD8978. NXP's out-of-tree driver uses 0xf9 for all of them, so there's a chance that 0xf0 is not correct in the mwifiex_reg_sd8977 and mwifiex_reg_sd8997 definitions. I cannot test that for lack of hardware, hence am leaving it as is. NXP has only released a firmware which runs Bluetooth over UART. Perhaps Bluetooth over SDIO is unsupported by this chipset. Consequently, only an "sdiouart" firmware image is referenced, not an alternative "sdsd" image. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/536b4f17a72ca460ad1b07045757043fb0778988.1674827105.git.lukas@wunner.de		2023-02-13 18:51:35 +02:00
..
card.h	mmc: core: Add SD card quirk for broken discard	2022-10-06 13:31:13 +02:00
core.h	mmc: core: improve API to make clear that mmc_sw_reset is for cards	2022-04-26 14:05:20 +02:00
host.h	mmc: core: Switch to basic workqueue API for sdio_irq_work	2022-09-14 11:53:47 +02:00
mmc.h	mmc: core: Fix ambiguous TRIM and DISCARD arg	2022-11-18 10:39:22 +01:00
pm.h
sd.h
sdio.h	mmc: core: Add support for SDIO wakeup interrupt	2022-07-26 16:58:31 +02:00
sdio_func.h
sdio_ids.h	wifi: mwifiex: Support SD8978 chipset	2023-02-13 18:51:35 +02:00
slot-gpio.h