260 lines
12 KiB
YAML
260 lines
12 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/brcm,bcm11351-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Broadcom BCM281xx pin controller
|
|
|
|
maintainers:
|
|
- Florian Fainelli <florian.fainelli@broadcom.com>
|
|
- Ray Jui <rjui@broadcom.com>
|
|
- Scott Branden <sbranden@broadcom.com>
|
|
|
|
allOf:
|
|
- $ref: pinctrl.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: brcm,bcm11351-pinctrl
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
patternProperties:
|
|
'-pins$':
|
|
type: object
|
|
additionalProperties: false
|
|
|
|
patternProperties:
|
|
'-grp[0-9]$':
|
|
type: object
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
Specifies the name(s) of one or more pins to be configured by
|
|
this node.
|
|
items:
|
|
enum: [ adcsync, bat_rm, bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda,
|
|
classgpwr, clk_cx8, clkout_0, clkout_1, clkout_2,
|
|
clkout_3, clkreq_in_0, clkreq_in_1, cws_sys_req1,
|
|
cws_sys_req2, cws_sys_req3, digmic1_clk, digmic1_dq,
|
|
digmic2_clk, digmic2_dq, gpen13, gpen14, gpen15, gpio00,
|
|
gpio01, gpio02, gpio03, gpio04, gpio05, gpio06, gpio07,
|
|
gpio08, gpio09, gpio10, gpio11, gpio12, gpio13, gpio14,
|
|
gps_pablank, gps_tmark, hdmi_scl, hdmi_sda, ic_dm, ic_dp,
|
|
kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3,
|
|
kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3,
|
|
lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5,
|
|
lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3,
|
|
lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync, lcd_oe,
|
|
lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2, lcd_r_3, lcd_r_4,
|
|
lcd_r_5, lcd_r_6, lcd_r_7, lcd_vsync, mdmgpio0, mdmgpio1,
|
|
mdmgpio2, mdmgpio3, mdmgpio4, mdmgpio5, mdmgpio6,
|
|
mdmgpio7, mdmgpio8, mphi_data_0, mphi_data_1, mphi_data_2,
|
|
mphi_data_3, mphi_data_4, mphi_data_5, mphi_data_6,
|
|
mphi_data_7, mphi_data_8, mphi_data_9, mphi_data_10,
|
|
mphi_data_11, mphi_data_12, mphi_data_13, mphi_data_14,
|
|
mphi_data_15, mphi_ha0, mphi_hat0, mphi_hat1, mphi_hce0_n,
|
|
mphi_hce1_n, mphi_hrd_n, mphi_hwr_n, mphi_run0, mphi_run1,
|
|
mtx_scan_clk, mtx_scan_data, nand_ad_0, nand_ad_1,
|
|
nand_ad_2, nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6,
|
|
nand_ad_7, nand_ale, nand_cen_0, nand_cen_1, nand_cle,
|
|
nand_oen, nand_rdy_0, nand_rdy_1, nand_wen, nand_wp, pc1,
|
|
pc2, pmu_int, pmu_scl, pmu_sda, rfst2g_mtsloten3g,
|
|
rgmii_0_rx_ctl, rgmii_0_rxc, rgmii_0_rxd_0, rgmii_0_rxd_1,
|
|
rgmii_0_rxd_2, rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc,
|
|
rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2,
|
|
rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc, rgmii_1_rxd_0,
|
|
rgmii_1_rxd_1, rgmii_1_rxd_2, rgmii_1_rxd_3,
|
|
rgmii_1_tx_ctl, rgmii_1_txc, rgmii_1_txd_0, rgmii_1_txd_1,
|
|
rgmii_1_txd_2, rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1,
|
|
rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1,
|
|
rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2,
|
|
sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1,
|
|
sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd,
|
|
sdio4_data_0, sdio4_data_1, sdio4_data_2, sdio4_data_3,
|
|
sim_clk, sim_data, sim_det, sim_resetn, sim2_clk,
|
|
sim2_data, sim2_det, sim2_resetn, sri_c, sri_d, sri_e,
|
|
ssp_extclk, ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd,
|
|
ssp2_clk, ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3,
|
|
ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1, ssp3_clk,
|
|
ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk, ssp4_fs, ssp4_rxd,
|
|
ssp4_txd, ssp5_clk, ssp5_fs, ssp5_rxd, ssp5_txd, ssp6_clk,
|
|
ssp6_fs, ssp6_rxd, ssp6_txd, stat_1, stat_2, sysclken,
|
|
traceclk, tracedt00, tracedt01, tracedt02, tracedt03,
|
|
tracedt04, tracedt05, tracedt06, tracedt07, tracedt08
|
|
tracedt09, tracedt10, tracedt11, tracedt12, tracedt13
|
|
tracedt14, tracedt15, txdata3g0, txpwrind, uartb1_ucts,
|
|
uartb1_urts, uartb1_urxd, uartb1_utxd, uartb2_urxd,
|
|
uartb2_utxd, uartb3_ucts, uartb3_urts, uartb3_urxd,
|
|
uartb3_utxd, uartb4_ucts, uartb4_urts, uartb4_urxd,
|
|
uartb4_utxd, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl,
|
|
vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ]
|
|
|
|
function:
|
|
description:
|
|
Specifies the pin mux selection.
|
|
enum: [ alt1, alt2, alt3, alt4 ]
|
|
|
|
slew-rate:
|
|
description: |
|
|
Meaning depends on configured pin mux:
|
|
*_scl or *_sda:
|
|
0: Standard (100 kbps) & Fast (400 kbps) mode
|
|
1: Highspeed (3.4 Mbps) mode
|
|
ic_dm or ic_dp:
|
|
0: normal slew rate
|
|
1: fast slew rate
|
|
Otherwise:
|
|
0: fast slew rate
|
|
1: normal slew rate
|
|
|
|
bias-disable: true
|
|
input-disable: true
|
|
input-enable: true
|
|
|
|
required:
|
|
- pins
|
|
|
|
allOf:
|
|
- $ref: pincfg-node.yaml#
|
|
|
|
# Optional properties for standard pins
|
|
- if:
|
|
properties:
|
|
pins:
|
|
contains:
|
|
enum: [ adcsync, bat_rm, classgpwr, clk_cx8, clkout_0,
|
|
clkout_1, clkout_2, clkout_3, clkreq_in_0,
|
|
clkreq_in_1, cws_sys_req1, cws_sys_req2,
|
|
cws_sys_req3, digmic1_clk, digmic1_dq, digmic2_clk,
|
|
digmic2_dq, gpen13, gpen14, gpen15, gpio00, gpio01,
|
|
gpio02, gpio03, gpio04, gpio05, gpio06, gpio07,
|
|
gpio08, gpio09, gpio10, gpio11, gpio12, gpio13,
|
|
gpio14, gps_pablank, gps_tmark, ic_dm, ic_dp,
|
|
kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3,
|
|
kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3,
|
|
lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5,
|
|
lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3,
|
|
lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync,
|
|
lcd_oe, lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2,
|
|
lcd_r_3, lcd_r_4, lcd_r_5, lcd_r_6, lcd_r_7,
|
|
lcd_vsync, mdmgpio0, mdmgpio1, mdmgpio2, mdmgpio3,
|
|
mdmgpio4, mdmgpio5, mdmgpio6, mdmgpio7, mdmgpio8,
|
|
mphi_data_0, mphi_data_1, mphi_data_2, mphi_data_3,
|
|
mphi_data_4, mphi_data_5, mphi_data_6, mphi_data_7,
|
|
mphi_data_8, mphi_data_9, mphi_data_10,
|
|
mphi_data_11, mphi_data_12, mphi_data_13,
|
|
mphi_data_14, mphi_data_15, mphi_ha0, mphi_hat0,
|
|
mphi_hat1, mphi_hce0_n, mphi_hce1_n, mphi_hrd_n,
|
|
mphi_hwr_n, mphi_run0, mphi_run1, mtx_scan_clk,
|
|
mtx_scan_data, nand_ad_0, nand_ad_1, nand_ad_2,
|
|
nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6,
|
|
nand_ad_7, nand_ale, nand_cen_0, nand_cen_1,
|
|
nand_cle, nand_oen, nand_rdy_0, nand_rdy_1,
|
|
nand_wen, nand_wp, pc1, pc2, pmu_int,
|
|
rfst2g_mtsloten3g, rgmii_0_rx_ctl, rgmii_0_rxc,
|
|
rgmii_0_rxd_0, rgmii_0_rxd_1, rgmii_0_rxd_2,
|
|
rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc,
|
|
rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2,
|
|
rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc,
|
|
rgmii_1_rxd_0, rgmii_1_rxd_1, rgmii_1_rxd_2,
|
|
rgmii_1_rxd_3, rgmii_1_tx_ctl, rgmii_1_txc,
|
|
rgmii_1_txd_0, rgmii_1_txd_1, rgmii_1_txd_2,
|
|
rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1,
|
|
rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1,
|
|
rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2,
|
|
sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1,
|
|
sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd,
|
|
sdio4_data_0, sdio4_data_1, sdio4_data_2,
|
|
sdio4_data_3, sim_clk, sim_data, sim_det,
|
|
sim_resetn, sim2_clk, sim2_data, sim2_det,
|
|
sim2_resetn, sri_c, sri_d, sri_e, ssp_extclk,
|
|
ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd, ssp2_clk,
|
|
ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3,
|
|
ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1,
|
|
ssp3_clk, ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk,
|
|
ssp4_fs, ssp4_rxd, ssp4_txd, ssp5_clk, ssp5_fs,
|
|
ssp5_rxd, ssp5_txd, ssp6_clk, ssp6_fs, ssp6_rxd,
|
|
ssp6_txd, stat_1, stat_2, sysclken, traceclk,
|
|
tracedt00, tracedt01, tracedt02, tracedt03,
|
|
tracedt04, tracedt05, tracedt06, tracedt07,
|
|
tracedt08, tracedt09, tracedt10, tracedt11,
|
|
tracedt12, tracedt13, tracedt14, tracedt15,
|
|
txdata3g0, txpwrind, uartb1_ucts, uartb1_urts,
|
|
uartb1_urxd, uartb1_utxd, uartb2_urxd, uartb2_utxd,
|
|
uartb3_ucts, uartb3_urts, uartb3_urxd, uartb3_utxd,
|
|
uartb4_ucts, uartb4_urts, uartb4_urxd, uartb4_utxd ]
|
|
then:
|
|
properties:
|
|
drive-strength:
|
|
enum: [ 2, 4, 6, 8, 10, 12, 14, 16 ]
|
|
|
|
bias-disable: true
|
|
bias-pull-up: true
|
|
bias-pull-down: true
|
|
input-schmitt-enable: true
|
|
input-schmitt-disable: true
|
|
|
|
# Optional properties for I2C pins
|
|
- if:
|
|
properties:
|
|
pins:
|
|
contains:
|
|
enum: [ bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda, pmu_scl,
|
|
pmu_sda, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl,
|
|
vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ]
|
|
then:
|
|
properties:
|
|
bias-pull-up:
|
|
description:
|
|
There are 3 pull-up resistors (1.2k, 1.8k, 2.7k) available
|
|
in parallel for I2C pins.
|
|
enum: [ 568, 720, 831, 1080, 1200, 1800, 2700 ]
|
|
|
|
bias-disable: true
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
pinctrl@35004800 {
|
|
compatible = "brcm,bcm11351-pinctrl";
|
|
reg = <0x35004800 0x430>;
|
|
|
|
dev-a-active-pins {
|
|
/* group node defining 1 standard pin */
|
|
std-grp0 {
|
|
pins = "gpio00";
|
|
function = "alt1";
|
|
input-schmitt-enable;
|
|
bias-disable;
|
|
slew-rate = <1>;
|
|
drive-strength = <4>;
|
|
};
|
|
|
|
/* group node defining 2 I2C pins */
|
|
i2c-grp0 {
|
|
pins = "bsc1_scl", "bsc1_sda";
|
|
function = "alt2";
|
|
bias-pull-up = <720>;
|
|
input-enable;
|
|
};
|
|
|
|
/* group node defining 2 HDMI pins */
|
|
hdmi-grp0 {
|
|
pins = "hdmi_scl", "hdmi_sda";
|
|
function = "alt3";
|
|
slew-rate = <1>;
|
|
};
|
|
};
|
|
};
|
|
...
|