linux-stable/drivers/regulator/fan53555.c
Rudi Heitbaum 5eee5eced9
regulator: fan53555: add tcs4526
For rk3399pro boards the tcs4526 regulator supports the vdd_gpu
regulator. The tcs4526 regulator has a chip id of <0>.
Add the compatibile tcs,tcs4526

without this patch, the dmesg output is:
  fan53555-regulator 0-0010: Chip ID 0 not supported!
  fan53555-regulator 0-0010: Failed to setup device!
  fan53555-regulator: probe of 0-0010 failed with error -22
with this patch, the dmesg output is:
  vdd_gpu: supplied by vcc5v0_sys

The regulators are described as:
- Dedicated power management IC TCS4525
- Lithium battery protection chip TCS4526

This has been tested with a Radxa Rock Pi N10.

Signed-off-by: Rudi Heitbaum <rudi@heitbaum.com>
Link: https://lore.kernel.org/r/20210602112943.GA119@5f9be87369f8
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-04 15:27:10 +01:00

676 lines
16 KiB
C

// SPDX-License-Identifier: GPL-2.0
//
// FAN53555 Fairchild Digitally Programmable TinyBuck Regulator Driver.
//
// Supported Part Numbers:
// FAN53555UC00X/01X/03X/04X/05X
//
// Copyright (c) 2012 Marvell Technology Ltd.
// Yunfan Zhang <yfzhang@marvell.com>
#include <linux/module.h>
#include <linux/param.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/of_device.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/regmap.h>
#include <linux/regulator/fan53555.h>
/* Voltage setting */
#define FAN53555_VSEL0 0x00
#define FAN53555_VSEL1 0x01
#define TCS4525_VSEL0 0x11
#define TCS4525_VSEL1 0x10
#define TCS4525_TIME 0x13
#define TCS4525_COMMAND 0x14
/* Control register */
#define FAN53555_CONTROL 0x02
/* IC Type */
#define FAN53555_ID1 0x03
/* IC mask version */
#define FAN53555_ID2 0x04
/* Monitor register */
#define FAN53555_MONITOR 0x05
/* VSEL bit definitions */
#define VSEL_BUCK_EN (1 << 7)
#define VSEL_MODE (1 << 6)
/* Chip ID and Verison */
#define DIE_ID 0x0F /* ID1 */
#define DIE_REV 0x0F /* ID2 */
/* Control bit definitions */
#define CTL_OUTPUT_DISCHG (1 << 7)
#define CTL_SLEW_MASK (0x7 << 4)
#define CTL_SLEW_SHIFT 4
#define CTL_RESET (1 << 2)
#define CTL_MODE_VSEL0_MODE BIT(0)
#define CTL_MODE_VSEL1_MODE BIT(1)
#define FAN53555_NVOLTAGES 64 /* Numbers of voltages */
#define FAN53526_NVOLTAGES 128
#define TCS_VSEL0_MODE (1 << 7)
#define TCS_VSEL1_MODE (1 << 6)
#define TCS_SLEW_SHIFT 3
#define TCS_SLEW_MASK (0x3 < 3)
enum fan53555_vendor {
FAN53526_VENDOR_FAIRCHILD = 0,
FAN53555_VENDOR_FAIRCHILD,
FAN53555_VENDOR_SILERGY,
FAN53526_VENDOR_TCS,
};
enum {
FAN53526_CHIP_ID_01 = 1,
};
enum {
FAN53526_CHIP_REV_08 = 8,
};
/* IC Type */
enum {
FAN53555_CHIP_ID_00 = 0,
FAN53555_CHIP_ID_01,
FAN53555_CHIP_ID_02,
FAN53555_CHIP_ID_03,
FAN53555_CHIP_ID_04,
FAN53555_CHIP_ID_05,
FAN53555_CHIP_ID_08 = 8,
};
enum {
TCS4525_CHIP_ID_12 = 12,
};
enum {
TCS4526_CHIP_ID_00 = 0,
};
/* IC mask revision */
enum {
FAN53555_CHIP_REV_00 = 0x3,
FAN53555_CHIP_REV_13 = 0xf,
};
enum {
SILERGY_SYR82X = 8,
SILERGY_SYR83X = 9,
};
struct fan53555_device_info {
enum fan53555_vendor vendor;
struct device *dev;
struct regulator_desc desc;
struct regulator_init_data *regulator;
/* IC Type and Rev */
int chip_id;
int chip_rev;
/* Voltage setting register */
unsigned int vol_reg;
unsigned int sleep_reg;
/* Voltage range and step(linear) */
unsigned int vsel_min;
unsigned int vsel_step;
unsigned int vsel_count;
/* Mode */
unsigned int mode_reg;
unsigned int mode_mask;
/* Sleep voltage cache */
unsigned int sleep_vol_cache;
/* Slew rate */
unsigned int slew_reg;
unsigned int slew_mask;
const unsigned int *ramp_delay_table;
unsigned int n_ramp_values;
unsigned int slew_rate;
};
static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
{
struct fan53555_device_info *di = rdev_get_drvdata(rdev);
int ret;
if (di->sleep_vol_cache == uV)
return 0;
ret = regulator_map_voltage_linear(rdev, uV, uV);
if (ret < 0)
return ret;
ret = regmap_update_bits(rdev->regmap, di->sleep_reg,
di->desc.vsel_mask, ret);
if (ret < 0)
return ret;
/* Cache the sleep voltage setting.
* Might not be the real voltage which is rounded */
di->sleep_vol_cache = uV;
return 0;
}
static int fan53555_set_suspend_enable(struct regulator_dev *rdev)
{
struct fan53555_device_info *di = rdev_get_drvdata(rdev);
return regmap_update_bits(rdev->regmap, di->sleep_reg,
VSEL_BUCK_EN, VSEL_BUCK_EN);
}
static int fan53555_set_suspend_disable(struct regulator_dev *rdev)
{
struct fan53555_device_info *di = rdev_get_drvdata(rdev);
return regmap_update_bits(rdev->regmap, di->sleep_reg,
VSEL_BUCK_EN, 0);
}
static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct fan53555_device_info *di = rdev_get_drvdata(rdev);
switch (mode) {
case REGULATOR_MODE_FAST:
regmap_update_bits(rdev->regmap, di->mode_reg,
di->mode_mask, di->mode_mask);
break;
case REGULATOR_MODE_NORMAL:
regmap_update_bits(rdev->regmap, di->vol_reg, di->mode_mask, 0);
break;
default:
return -EINVAL;
}
return 0;
}
static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
{
struct fan53555_device_info *di = rdev_get_drvdata(rdev);
unsigned int val;
int ret = 0;
ret = regmap_read(rdev->regmap, di->mode_reg, &val);
if (ret < 0)
return ret;
if (val & di->mode_mask)
return REGULATOR_MODE_FAST;
else
return REGULATOR_MODE_NORMAL;
}
static const unsigned int slew_rates[] = {
64000,
32000,
16000,
8000,
4000,
2000,
1000,
500,
};
static const unsigned int tcs_slew_rates[] = {
18700,
9300,
4600,
2300,
};
static const struct regulator_ops fan53555_regulator_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.map_voltage = regulator_map_voltage_linear,
.list_voltage = regulator_list_voltage_linear,
.set_suspend_voltage = fan53555_set_suspend_voltage,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_mode = fan53555_set_mode,
.get_mode = fan53555_get_mode,
.set_ramp_delay = regulator_set_ramp_delay_regmap,
.set_suspend_enable = fan53555_set_suspend_enable,
.set_suspend_disable = fan53555_set_suspend_disable,
};
static int fan53526_voltages_setup_fairchild(struct fan53555_device_info *di)
{
/* Init voltage range and step */
switch (di->chip_id) {
case FAN53526_CHIP_ID_01:
switch (di->chip_rev) {
case FAN53526_CHIP_REV_08:
di->vsel_min = 600000;
di->vsel_step = 6250;
break;
default:
dev_err(di->dev,
"Chip ID %d with rev %d not supported!\n",
di->chip_id, di->chip_rev);
return -EINVAL;
}
break;
default:
dev_err(di->dev,
"Chip ID %d not supported!\n", di->chip_id);
return -EINVAL;
}
di->slew_reg = FAN53555_CONTROL;
di->slew_mask = CTL_SLEW_MASK;
di->ramp_delay_table = slew_rates;
di->n_ramp_values = ARRAY_SIZE(slew_rates);
di->vsel_count = FAN53526_NVOLTAGES;
return 0;
}
static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
{
/* Init voltage range and step */
switch (di->chip_id) {
case FAN53555_CHIP_ID_00:
switch (di->chip_rev) {
case FAN53555_CHIP_REV_00:
di->vsel_min = 600000;
di->vsel_step = 10000;
break;
case FAN53555_CHIP_REV_13:
di->vsel_min = 800000;
di->vsel_step = 10000;
break;
default:
dev_err(di->dev,
"Chip ID %d with rev %d not supported!\n",
di->chip_id, di->chip_rev);
return -EINVAL;
}
break;
case FAN53555_CHIP_ID_01:
case FAN53555_CHIP_ID_03:
case FAN53555_CHIP_ID_05:
case FAN53555_CHIP_ID_08:
di->vsel_min = 600000;
di->vsel_step = 10000;
break;
case FAN53555_CHIP_ID_04:
di->vsel_min = 603000;
di->vsel_step = 12826;
break;
default:
dev_err(di->dev,
"Chip ID %d not supported!\n", di->chip_id);
return -EINVAL;
}
di->slew_reg = FAN53555_CONTROL;
di->slew_mask = CTL_SLEW_MASK;
di->ramp_delay_table = slew_rates;
di->n_ramp_values = ARRAY_SIZE(slew_rates);
di->vsel_count = FAN53555_NVOLTAGES;
return 0;
}
static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
{
/* Init voltage range and step */
switch (di->chip_id) {
case SILERGY_SYR82X:
case SILERGY_SYR83X:
di->vsel_min = 712500;
di->vsel_step = 12500;
break;
default:
dev_err(di->dev,
"Chip ID %d not supported!\n", di->chip_id);
return -EINVAL;
}
di->slew_reg = FAN53555_CONTROL;
di->slew_mask = CTL_SLEW_MASK;
di->ramp_delay_table = slew_rates;
di->n_ramp_values = ARRAY_SIZE(slew_rates);
di->vsel_count = FAN53555_NVOLTAGES;
return 0;
}
static int fan53526_voltages_setup_tcs(struct fan53555_device_info *di)
{
switch (di->chip_id) {
case TCS4525_CHIP_ID_12:
case TCS4526_CHIP_ID_00:
di->slew_reg = TCS4525_TIME;
di->slew_mask = TCS_SLEW_MASK;
di->ramp_delay_table = tcs_slew_rates;
di->n_ramp_values = ARRAY_SIZE(tcs_slew_rates);
/* Init voltage range and step */
di->vsel_min = 600000;
di->vsel_step = 6250;
di->vsel_count = FAN53526_NVOLTAGES;
break;
default:
dev_err(di->dev, "Chip ID %d not supported!\n", di->chip_id);
return -EINVAL;
}
return 0;
}
/* For 00,01,03,05 options:
* VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V.
* For 04 option:
* VOUT = 0.603V + NSELx * 12.826mV, from 0.603 to 1.411V.
* */
static int fan53555_device_setup(struct fan53555_device_info *di,
struct fan53555_platform_data *pdata)
{
int ret = 0;
/* Setup voltage control register */
switch (di->vendor) {
case FAN53526_VENDOR_FAIRCHILD:
case FAN53555_VENDOR_FAIRCHILD:
case FAN53555_VENDOR_SILERGY:
switch (pdata->sleep_vsel_id) {
case FAN53555_VSEL_ID_0:
di->sleep_reg = FAN53555_VSEL0;
di->vol_reg = FAN53555_VSEL1;
break;
case FAN53555_VSEL_ID_1:
di->sleep_reg = FAN53555_VSEL1;
di->vol_reg = FAN53555_VSEL0;
break;
default:
dev_err(di->dev, "Invalid VSEL ID!\n");
return -EINVAL;
}
break;
case FAN53526_VENDOR_TCS:
switch (pdata->sleep_vsel_id) {
case FAN53555_VSEL_ID_0:
di->sleep_reg = TCS4525_VSEL0;
di->vol_reg = TCS4525_VSEL1;
break;
case FAN53555_VSEL_ID_1:
di->sleep_reg = TCS4525_VSEL1;
di->vol_reg = TCS4525_VSEL0;
break;
default:
dev_err(di->dev, "Invalid VSEL ID!\n");
return -EINVAL;
}
break;
default:
dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
return -EINVAL;
}
/* Setup mode control register */
switch (di->vendor) {
case FAN53526_VENDOR_FAIRCHILD:
di->mode_reg = FAN53555_CONTROL;
switch (pdata->sleep_vsel_id) {
case FAN53555_VSEL_ID_0:
di->mode_mask = CTL_MODE_VSEL1_MODE;
break;
case FAN53555_VSEL_ID_1:
di->mode_mask = CTL_MODE_VSEL0_MODE;
break;
}
break;
case FAN53555_VENDOR_FAIRCHILD:
case FAN53555_VENDOR_SILERGY:
di->mode_reg = di->vol_reg;
di->mode_mask = VSEL_MODE;
break;
case FAN53526_VENDOR_TCS:
di->mode_reg = TCS4525_COMMAND;
switch (pdata->sleep_vsel_id) {
case FAN53555_VSEL_ID_0:
di->mode_mask = TCS_VSEL1_MODE;
break;
case FAN53555_VSEL_ID_1:
di->mode_mask = TCS_VSEL0_MODE;
break;
}
break;
default:
dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
return -EINVAL;
}
/* Setup voltage range */
switch (di->vendor) {
case FAN53526_VENDOR_FAIRCHILD:
ret = fan53526_voltages_setup_fairchild(di);
break;
case FAN53555_VENDOR_FAIRCHILD:
ret = fan53555_voltages_setup_fairchild(di);
break;
case FAN53555_VENDOR_SILERGY:
ret = fan53555_voltages_setup_silergy(di);
break;
case FAN53526_VENDOR_TCS:
ret = fan53526_voltages_setup_tcs(di);
break;
default:
dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
return -EINVAL;
}
return ret;
}
static int fan53555_regulator_register(struct fan53555_device_info *di,
struct regulator_config *config)
{
struct regulator_desc *rdesc = &di->desc;
struct regulator_dev *rdev;
rdesc->name = "fan53555-reg";
rdesc->supply_name = "vin";
rdesc->ops = &fan53555_regulator_ops;
rdesc->type = REGULATOR_VOLTAGE;
rdesc->n_voltages = di->vsel_count;
rdesc->enable_reg = di->vol_reg;
rdesc->enable_mask = VSEL_BUCK_EN;
rdesc->min_uV = di->vsel_min;
rdesc->uV_step = di->vsel_step;
rdesc->vsel_reg = di->vol_reg;
rdesc->vsel_mask = di->vsel_count - 1;
rdesc->ramp_reg = di->slew_reg;
rdesc->ramp_mask = di->slew_mask;
rdesc->ramp_delay_table = di->ramp_delay_table;
rdesc->n_ramp_values = di->n_ramp_values;
rdesc->owner = THIS_MODULE;
rdev = devm_regulator_register(di->dev, &di->desc, config);
return PTR_ERR_OR_ZERO(rdev);
}
static const struct regmap_config fan53555_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev,
struct device_node *np,
const struct regulator_desc *desc)
{
struct fan53555_platform_data *pdata;
int ret;
u32 tmp;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return NULL;
pdata->regulator = of_get_regulator_init_data(dev, np, desc);
ret = of_property_read_u32(np, "fcs,suspend-voltage-selector",
&tmp);
if (!ret)
pdata->sleep_vsel_id = tmp;
return pdata;
}
static const struct of_device_id __maybe_unused fan53555_dt_ids[] = {
{
.compatible = "fcs,fan53526",
.data = (void *)FAN53526_VENDOR_FAIRCHILD,
}, {
.compatible = "fcs,fan53555",
.data = (void *)FAN53555_VENDOR_FAIRCHILD
}, {
.compatible = "silergy,syr827",
.data = (void *)FAN53555_VENDOR_SILERGY,
}, {
.compatible = "silergy,syr828",
.data = (void *)FAN53555_VENDOR_SILERGY,
}, {
.compatible = "tcs,tcs4525",
.data = (void *)FAN53526_VENDOR_TCS
}, {
.compatible = "tcs,tcs4526",
.data = (void *)FAN53526_VENDOR_TCS
},
{ }
};
MODULE_DEVICE_TABLE(of, fan53555_dt_ids);
static int fan53555_regulator_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device_node *np = client->dev.of_node;
struct fan53555_device_info *di;
struct fan53555_platform_data *pdata;
struct regulator_config config = { };
struct regmap *regmap;
unsigned int val;
int ret;
di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info),
GFP_KERNEL);
if (!di)
return -ENOMEM;
pdata = dev_get_platdata(&client->dev);
if (!pdata)
pdata = fan53555_parse_dt(&client->dev, np, &di->desc);
if (!pdata || !pdata->regulator) {
dev_err(&client->dev, "Platform data not found!\n");
return -ENODEV;
}
di->regulator = pdata->regulator;
if (client->dev.of_node) {
di->vendor =
(unsigned long)of_device_get_match_data(&client->dev);
} else {
/* if no ramp constraint set, get the pdata ramp_delay */
if (!di->regulator->constraints.ramp_delay) {
if (pdata->slew_rate >= ARRAY_SIZE(slew_rates)) {
dev_err(&client->dev, "Invalid slew_rate\n");
return -EINVAL;
}
di->regulator->constraints.ramp_delay
= slew_rates[pdata->slew_rate];
}
di->vendor = id->driver_data;
}
regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config);
if (IS_ERR(regmap)) {
dev_err(&client->dev, "Failed to allocate regmap!\n");
return PTR_ERR(regmap);
}
di->dev = &client->dev;
i2c_set_clientdata(client, di);
/* Get chip ID */
ret = regmap_read(regmap, FAN53555_ID1, &val);
if (ret < 0) {
dev_err(&client->dev, "Failed to get chip ID!\n");
return ret;
}
di->chip_id = val & DIE_ID;
/* Get chip revision */
ret = regmap_read(regmap, FAN53555_ID2, &val);
if (ret < 0) {
dev_err(&client->dev, "Failed to get chip Rev!\n");
return ret;
}
di->chip_rev = val & DIE_REV;
dev_info(&client->dev, "FAN53555 Option[%d] Rev[%d] Detected!\n",
di->chip_id, di->chip_rev);
/* Device init */
ret = fan53555_device_setup(di, pdata);
if (ret < 0) {
dev_err(&client->dev, "Failed to setup device!\n");
return ret;
}
/* Register regulator */
config.dev = di->dev;
config.init_data = di->regulator;
config.regmap = regmap;
config.driver_data = di;
config.of_node = np;
ret = fan53555_regulator_register(di, &config);
if (ret < 0)
dev_err(&client->dev, "Failed to register regulator!\n");
return ret;
}
static const struct i2c_device_id fan53555_id[] = {
{
.name = "fan53526",
.driver_data = FAN53526_VENDOR_FAIRCHILD
}, {
.name = "fan53555",
.driver_data = FAN53555_VENDOR_FAIRCHILD
}, {
.name = "syr827",
.driver_data = FAN53555_VENDOR_SILERGY
}, {
.name = "syr828",
.driver_data = FAN53555_VENDOR_SILERGY
}, {
.name = "tcs4525",
.driver_data = FAN53526_VENDOR_TCS
}, {
.name = "tcs4526",
.driver_data = FAN53526_VENDOR_TCS
},
{ },
};
MODULE_DEVICE_TABLE(i2c, fan53555_id);
static struct i2c_driver fan53555_regulator_driver = {
.driver = {
.name = "fan53555-regulator",
.of_match_table = of_match_ptr(fan53555_dt_ids),
},
.probe = fan53555_regulator_probe,
.id_table = fan53555_id,
};
module_i2c_driver(fan53555_regulator_driver);
MODULE_AUTHOR("Yunfan Zhang <yfzhang@marvell.com>");
MODULE_DESCRIPTION("FAN53555 regulator driver");
MODULE_LICENSE("GPL v2");