linux-stable/drivers/scsi/gvp11.c
Mike Rapoport e31cf2f4ca mm: don't include asm/pgtable.h if linux/mm.h is already included
Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once.  For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
        return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g.  pte_alloc() and
pmd_alloc().  So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.

The include statements in such cases are remove with a simple loop:

	for f in $(git grep -l "include <linux/mm.h>") ; do
		sed -i -e '/include <asm\/pgtable.h>/ d' $f
	done

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00

415 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
#include <linux/types.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/zorro.h>
#include <linux/module.h>
#include <asm/page.h>
#include <asm/amigaints.h>
#include <asm/amigahw.h>
#include "scsi.h"
#include "wd33c93.h"
#include "gvp11.h"
#define CHECK_WD33C93
struct gvp11_hostdata {
struct WD33C93_hostdata wh;
struct gvp11_scsiregs *regs;
};
static irqreturn_t gvp11_intr(int irq, void *data)
{
struct Scsi_Host *instance = data;
struct gvp11_hostdata *hdata = shost_priv(instance);
unsigned int status = hdata->regs->CNTR;
unsigned long flags;
if (!(status & GVP11_DMAC_INT_PENDING))
return IRQ_NONE;
spin_lock_irqsave(instance->host_lock, flags);
wd33c93_intr(instance);
spin_unlock_irqrestore(instance->host_lock, flags);
return IRQ_HANDLED;
}
static int gvp11_xfer_mask = 0;
void gvp11_setup(char *str, int *ints)
{
gvp11_xfer_mask = ints[1];
}
static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
{
struct Scsi_Host *instance = cmd->device->host;
struct gvp11_hostdata *hdata = shost_priv(instance);
struct WD33C93_hostdata *wh = &hdata->wh;
struct gvp11_scsiregs *regs = hdata->regs;
unsigned short cntr = GVP11_DMAC_INT_ENABLE;
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
int bank_mask;
static int scsi_alloc_out_of_range = 0;
/* use bounce buffer if the physical address is bad */
if (addr & wh->dma_xfer_mask) {
wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
if (!scsi_alloc_out_of_range) {
wh->dma_bounce_buffer =
kmalloc(wh->dma_bounce_len, GFP_KERNEL);
wh->dma_buffer_pool = BUF_SCSI_ALLOCED;
}
if (scsi_alloc_out_of_range ||
!wh->dma_bounce_buffer) {
wh->dma_bounce_buffer =
amiga_chip_alloc(wh->dma_bounce_len,
"GVP II SCSI Bounce Buffer");
if (!wh->dma_bounce_buffer) {
wh->dma_bounce_len = 0;
return 1;
}
wh->dma_buffer_pool = BUF_CHIP_ALLOCED;
}
/* check if the address of the bounce buffer is OK */
addr = virt_to_bus(wh->dma_bounce_buffer);
if (addr & wh->dma_xfer_mask) {
/* fall back to Chip RAM if address out of range */
if (wh->dma_buffer_pool == BUF_SCSI_ALLOCED) {
kfree(wh->dma_bounce_buffer);
scsi_alloc_out_of_range = 1;
} else {
amiga_chip_free(wh->dma_bounce_buffer);
}
wh->dma_bounce_buffer =
amiga_chip_alloc(wh->dma_bounce_len,
"GVP II SCSI Bounce Buffer");
if (!wh->dma_bounce_buffer) {
wh->dma_bounce_len = 0;
return 1;
}
addr = virt_to_bus(wh->dma_bounce_buffer);
wh->dma_buffer_pool = BUF_CHIP_ALLOCED;
}
if (!dir_in) {
/* copy to bounce buffer for a write */
memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr,
cmd->SCp.this_residual);
}
}
/* setup dma direction */
if (!dir_in)
cntr |= GVP11_DMAC_DIR_WRITE;
wh->dma_dir = dir_in;
regs->CNTR = cntr;
/* setup DMA *physical* address */
regs->ACR = addr;
if (dir_in) {
/* invalidate any cache */
cache_clear(addr, cmd->SCp.this_residual);
} else {
/* push any dirty cache */
cache_push(addr, cmd->SCp.this_residual);
}
bank_mask = (~wh->dma_xfer_mask >> 18) & 0x01c0;
if (bank_mask)
regs->BANK = bank_mask & (addr >> 18);
/* start DMA */
regs->ST_DMA = 1;
/* return success */
return 0;
}
static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
int status)
{
struct gvp11_hostdata *hdata = shost_priv(instance);
struct WD33C93_hostdata *wh = &hdata->wh;
struct gvp11_scsiregs *regs = hdata->regs;
/* stop DMA */
regs->SP_DMA = 1;
/* remove write bit from CONTROL bits */
regs->CNTR = GVP11_DMAC_INT_ENABLE;
/* copy from a bounce buffer, if necessary */
if (status && wh->dma_bounce_buffer) {
if (wh->dma_dir && SCpnt)
memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer,
SCpnt->SCp.this_residual);
if (wh->dma_buffer_pool == BUF_SCSI_ALLOCED)
kfree(wh->dma_bounce_buffer);
else
amiga_chip_free(wh->dma_bounce_buffer);
wh->dma_bounce_buffer = NULL;
wh->dma_bounce_len = 0;
}
}
static struct scsi_host_template gvp11_scsi_template = {
.module = THIS_MODULE,
.name = "GVP Series II SCSI",
.show_info = wd33c93_show_info,
.write_info = wd33c93_write_info,
.proc_name = "GVP11",
.queuecommand = wd33c93_queuecommand,
.eh_abort_handler = wd33c93_abort,
.eh_host_reset_handler = wd33c93_host_reset,
.can_queue = CAN_QUEUE,
.this_id = 7,
.sg_tablesize = SG_ALL,
.cmd_per_lun = CMD_PER_LUN,
.dma_boundary = PAGE_SIZE - 1,
};
static int check_wd33c93(struct gvp11_scsiregs *regs)
{
#ifdef CHECK_WD33C93
volatile unsigned char *sasr_3393, *scmd_3393;
unsigned char save_sasr;
unsigned char q, qq;
/*
* These darn GVP boards are a problem - it can be tough to tell
* whether or not they include a SCSI controller. This is the
* ultimate Yet-Another-GVP-Detection-Hack in that it actually
* probes for a WD33c93 chip: If we find one, it's extremely
* likely that this card supports SCSI, regardless of Product_
* Code, Board_Size, etc.
*/
/* Get pointers to the presumed register locations and save contents */
sasr_3393 = &regs->SASR;
scmd_3393 = &regs->SCMD;
save_sasr = *sasr_3393;
/* First test the AuxStatus Reg */
q = *sasr_3393; /* read it */
if (q & 0x08) /* bit 3 should always be clear */
return -ENODEV;
*sasr_3393 = WD_AUXILIARY_STATUS; /* setup indirect address */
if (*sasr_3393 == WD_AUXILIARY_STATUS) { /* shouldn't retain the write */
*sasr_3393 = save_sasr; /* Oops - restore this byte */
return -ENODEV;
}
if (*sasr_3393 != q) { /* should still read the same */
*sasr_3393 = save_sasr; /* Oops - restore this byte */
return -ENODEV;
}
if (*scmd_3393 != q) /* and so should the image at 0x1f */
return -ENODEV;
/*
* Ok, we probably have a wd33c93, but let's check a few other places
* for good measure. Make sure that this works for both 'A and 'B
* chip versions.
*/
*sasr_3393 = WD_SCSI_STATUS;
q = *scmd_3393;
*sasr_3393 = WD_SCSI_STATUS;
*scmd_3393 = ~q;
*sasr_3393 = WD_SCSI_STATUS;
qq = *scmd_3393;
*sasr_3393 = WD_SCSI_STATUS;
*scmd_3393 = q;
if (qq != q) /* should be read only */
return -ENODEV;
*sasr_3393 = 0x1e; /* this register is unimplemented */
q = *scmd_3393;
*sasr_3393 = 0x1e;
*scmd_3393 = ~q;
*sasr_3393 = 0x1e;
qq = *scmd_3393;
*sasr_3393 = 0x1e;
*scmd_3393 = q;
if (qq != q || qq != 0xff) /* should be read only, all 1's */
return -ENODEV;
*sasr_3393 = WD_TIMEOUT_PERIOD;
q = *scmd_3393;
*sasr_3393 = WD_TIMEOUT_PERIOD;
*scmd_3393 = ~q;
*sasr_3393 = WD_TIMEOUT_PERIOD;
qq = *scmd_3393;
*sasr_3393 = WD_TIMEOUT_PERIOD;
*scmd_3393 = q;
if (qq != (~q & 0xff)) /* should be read/write */
return -ENODEV;
#endif /* CHECK_WD33C93 */
return 0;
}
static int gvp11_probe(struct zorro_dev *z, const struct zorro_device_id *ent)
{
struct Scsi_Host *instance;
unsigned long address;
int error;
unsigned int epc;
unsigned int default_dma_xfer_mask;
struct gvp11_hostdata *hdata;
struct gvp11_scsiregs *regs;
wd33c93_regs wdregs;
default_dma_xfer_mask = ent->driver_data;
/*
* Rumors state that some GVP ram boards use the same product
* code as the SCSI controllers. Therefore if the board-size
* is not 64KB we assume it is a ram board and bail out.
*/
if (zorro_resource_len(z) != 0x10000)
return -ENODEV;
address = z->resource.start;
if (!request_mem_region(address, 256, "wd33c93"))
return -EBUSY;
regs = ZTWO_VADDR(address);
error = check_wd33c93(regs);
if (error)
goto fail_check_or_alloc;
instance = scsi_host_alloc(&gvp11_scsi_template,
sizeof(struct gvp11_hostdata));
if (!instance) {
error = -ENOMEM;
goto fail_check_or_alloc;
}
instance->irq = IRQ_AMIGA_PORTS;
instance->unique_id = z->slotaddr;
regs->secret2 = 1;
regs->secret1 = 0;
regs->secret3 = 15;
while (regs->CNTR & GVP11_DMAC_BUSY)
;
regs->CNTR = 0;
regs->BANK = 0;
wdregs.SASR = &regs->SASR;
wdregs.SCMD = &regs->SCMD;
hdata = shost_priv(instance);
if (gvp11_xfer_mask)
hdata->wh.dma_xfer_mask = gvp11_xfer_mask;
else
hdata->wh.dma_xfer_mask = default_dma_xfer_mask;
hdata->wh.no_sync = 0xff;
hdata->wh.fast = 0;
hdata->wh.dma_mode = CTRL_DMA;
hdata->regs = regs;
/*
* Check for 14MHz SCSI clock
*/
epc = *(unsigned short *)(ZTWO_VADDR(address) + 0x8000);
wd33c93_init(instance, wdregs, dma_setup, dma_stop,
(epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10
: WD33C93_FS_12_15);
error = request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED,
"GVP11 SCSI", instance);
if (error)
goto fail_irq;
regs->CNTR = GVP11_DMAC_INT_ENABLE;
error = scsi_add_host(instance, NULL);
if (error)
goto fail_host;
zorro_set_drvdata(z, instance);
scsi_scan_host(instance);
return 0;
fail_host:
free_irq(IRQ_AMIGA_PORTS, instance);
fail_irq:
scsi_host_put(instance);
fail_check_or_alloc:
release_mem_region(address, 256);
return error;
}
static void gvp11_remove(struct zorro_dev *z)
{
struct Scsi_Host *instance = zorro_get_drvdata(z);
struct gvp11_hostdata *hdata = shost_priv(instance);
hdata->regs->CNTR = 0;
scsi_remove_host(instance);
free_irq(IRQ_AMIGA_PORTS, instance);
scsi_host_put(instance);
release_mem_region(z->resource.start, 256);
}
/*
* This should (hopefully) be the correct way to identify
* all the different GVP SCSI controllers (except for the
* SERIES I though).
*/
static struct zorro_device_id gvp11_zorro_tbl[] = {
{ ZORRO_PROD_GVP_COMBO_030_R3_SCSI, ~0x00ffffff },
{ ZORRO_PROD_GVP_SERIES_II, ~0x00ffffff },
{ ZORRO_PROD_GVP_GFORCE_030_SCSI, ~0x01ffffff },
{ ZORRO_PROD_GVP_A530_SCSI, ~0x01ffffff },
{ ZORRO_PROD_GVP_COMBO_030_R4_SCSI, ~0x01ffffff },
{ ZORRO_PROD_GVP_A1291, ~0x07ffffff },
{ ZORRO_PROD_GVP_GFORCE_040_SCSI_1, ~0x07ffffff },
{ 0 }
};
MODULE_DEVICE_TABLE(zorro, gvp11_zorro_tbl);
static struct zorro_driver gvp11_driver = {
.name = "gvp11",
.id_table = gvp11_zorro_tbl,
.probe = gvp11_probe,
.remove = gvp11_remove,
};
static int __init gvp11_init(void)
{
return zorro_register_driver(&gvp11_driver);
}
module_init(gvp11_init);
static void __exit gvp11_exit(void)
{
zorro_unregister_driver(&gvp11_driver);
}
module_exit(gvp11_exit);
MODULE_DESCRIPTION("GVP Series II SCSI");
MODULE_LICENSE("GPL");