linux-stable/drivers/ata/ahci_brcm.c
Geert Uytterhoeven 5e776d7b20 ata: Drop commas after OF match table sentinels
It does not make sense to have a comma after a sentinel, as any new
elements must be added before the sentinel.

Add comments to clarify the purpose of the empty elements.
Rewrap entries to a single line to have a consistent style.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> [ahci_brcm]
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-03-07 11:49:10 +09:00

594 lines
15 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Broadcom SATA3 AHCI Controller Driver
*
* Copyright © 2009-2015 Broadcom Corporation
*/
#include <linux/ahci_platform.h>
#include <linux/compiler.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/libata.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/string.h>
#include "ahci.h"
#define DRV_NAME "brcm-ahci"
#define SATA_TOP_CTRL_VERSION 0x0
#define SATA_TOP_CTRL_BUS_CTRL 0x4
#define MMIO_ENDIAN_SHIFT 0 /* CPU->AHCI */
#define DMADESC_ENDIAN_SHIFT 2 /* AHCI->DDR */
#define DMADATA_ENDIAN_SHIFT 4 /* AHCI->DDR */
#define PIODATA_ENDIAN_SHIFT 6
#define ENDIAN_SWAP_NONE 0
#define ENDIAN_SWAP_FULL 2
#define SATA_TOP_CTRL_TP_CTRL 0x8
#define SATA_TOP_CTRL_PHY_CTRL 0xc
#define SATA_TOP_CTRL_PHY_CTRL_1 0x0
#define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE BIT(14)
#define SATA_TOP_CTRL_PHY_CTRL_2 0x4
#define SATA_TOP_CTRL_2_SW_RST_MDIOREG BIT(0)
#define SATA_TOP_CTRL_2_SW_RST_OOB BIT(1)
#define SATA_TOP_CTRL_2_SW_RST_RX BIT(2)
#define SATA_TOP_CTRL_2_SW_RST_TX BIT(3)
#define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14)
#define SATA_TOP_CTRL_PHY_OFFS 0x8
#define SATA_TOP_MAX_PHYS 2
#define SATA_FIRST_PORT_CTRL 0x700
#define SATA_NEXT_PORT_CTRL_OFFSET 0x80
#define SATA_PORT_PCTRL6(reg_base) (reg_base + 0x18)
/* On big-endian MIPS, buses are reversed to big endian, so switch them back */
#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
#define DATA_ENDIAN 2 /* AHCI->DDR inbound accesses */
#define MMIO_ENDIAN 2 /* CPU->AHCI outbound accesses */
#else
#define DATA_ENDIAN 0
#define MMIO_ENDIAN 0
#endif
#define BUS_CTRL_ENDIAN_CONF \
((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) | \
(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \
(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
#define BUS_CTRL_ENDIAN_NSP_CONF \
(0x02 << DMADATA_ENDIAN_SHIFT | 0x02 << DMADESC_ENDIAN_SHIFT)
#define BUS_CTRL_ENDIAN_CONF_MASK \
(0x3 << MMIO_ENDIAN_SHIFT | 0x3 << DMADESC_ENDIAN_SHIFT | \
0x3 << DMADATA_ENDIAN_SHIFT | 0x3 << PIODATA_ENDIAN_SHIFT)
enum brcm_ahci_version {
BRCM_SATA_BCM7425 = 1,
BRCM_SATA_BCM7445,
BRCM_SATA_NSP,
BRCM_SATA_BCM7216,
};
enum brcm_ahci_quirks {
BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(0),
};
struct brcm_ahci_priv {
struct device *dev;
void __iomem *top_ctrl;
u32 port_mask;
u32 quirks;
enum brcm_ahci_version version;
struct reset_control *rcdev_rescal;
struct reset_control *rcdev_ahci;
};
static inline u32 brcm_sata_readreg(void __iomem *addr)
{
/*
* MIPS endianness is configured by boot strap, which also reverses all
* bus endianness (i.e., big-endian CPU + big endian bus ==> native
* endian I/O).
*
* Other architectures (e.g., ARM) either do not support big endian, or
* else leave I/O in little endian mode.
*/
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
return __raw_readl(addr);
else
return readl_relaxed(addr);
}
static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
{
/* See brcm_sata_readreg() comments */
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
__raw_writel(val, addr);
else
writel_relaxed(val, addr);
}
static void brcm_sata_alpm_init(struct ahci_host_priv *hpriv)
{
struct brcm_ahci_priv *priv = hpriv->plat_data;
u32 port_ctrl, host_caps;
int i;
/* Enable support for ALPM */
host_caps = readl(hpriv->mmio + HOST_CAP);
if (!(host_caps & HOST_CAP_ALPM))
hpriv->flags |= AHCI_HFLAG_YES_ALPM;
/*
* Adjust timeout to allow PLL sufficient time to lock while waking
* up from slumber mode.
*/
for (i = 0, port_ctrl = SATA_FIRST_PORT_CTRL;
i < SATA_TOP_MAX_PHYS;
i++, port_ctrl += SATA_NEXT_PORT_CTRL_OFFSET) {
if (priv->port_mask & BIT(i))
writel(0xff1003fc,
hpriv->mmio + SATA_PORT_PCTRL6(port_ctrl));
}
}
static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
{
void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
(port * SATA_TOP_CTRL_PHY_OFFS);
void __iomem *p;
u32 reg;
if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
return;
/* clear PHY_DEFAULT_POWER_STATE */
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
reg = brcm_sata_readreg(p);
reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
brcm_sata_writereg(reg, p);
/* reset the PHY digital logic */
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
reg = brcm_sata_readreg(p);
reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
SATA_TOP_CTRL_2_SW_RST_RX);
reg |= SATA_TOP_CTRL_2_SW_RST_TX;
brcm_sata_writereg(reg, p);
reg = brcm_sata_readreg(p);
reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
brcm_sata_writereg(reg, p);
reg = brcm_sata_readreg(p);
reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
brcm_sata_writereg(reg, p);
(void)brcm_sata_readreg(p);
}
static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
{
void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
(port * SATA_TOP_CTRL_PHY_OFFS);
void __iomem *p;
u32 reg;
if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
return;
/* power-off the PHY digital logic */
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
reg = brcm_sata_readreg(p);
reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX |
SATA_TOP_CTRL_2_PHY_GLOBAL_RESET);
brcm_sata_writereg(reg, p);
/* set PHY_DEFAULT_POWER_STATE */
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
reg = brcm_sata_readreg(p);
reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
brcm_sata_writereg(reg, p);
}
static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv)
{
int i;
for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
if (priv->port_mask & BIT(i))
brcm_sata_phy_enable(priv, i);
}
static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
{
int i;
for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
if (priv->port_mask & BIT(i))
brcm_sata_phy_disable(priv, i);
}
static u32 brcm_ahci_get_portmask(struct ahci_host_priv *hpriv,
struct brcm_ahci_priv *priv)
{
u32 impl;
impl = readl(hpriv->mmio + HOST_PORTS_IMPL);
if (fls(impl) > SATA_TOP_MAX_PHYS)
dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
impl);
else if (!impl)
dev_info(priv->dev, "no ports found\n");
return impl;
}
static void brcm_sata_init(struct brcm_ahci_priv *priv)
{
void __iomem *ctrl = priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL;
u32 data;
/* Configure endianness */
data = brcm_sata_readreg(ctrl);
data &= ~BUS_CTRL_ENDIAN_CONF_MASK;
if (priv->version == BRCM_SATA_NSP)
data |= BUS_CTRL_ENDIAN_NSP_CONF;
else
data |= BUS_CTRL_ENDIAN_CONF;
brcm_sata_writereg(data, ctrl);
}
static unsigned int brcm_ahci_read_id(struct ata_device *dev,
struct ata_taskfile *tf, __le16 *id)
{
struct ata_port *ap = dev->link->ap;
struct ata_host *host = ap->host;
struct ahci_host_priv *hpriv = host->private_data;
struct brcm_ahci_priv *priv = hpriv->plat_data;
void __iomem *mmio = hpriv->mmio;
unsigned int err_mask;
unsigned long flags;
int i, rc;
u32 ctl;
/* Try to read the device ID and, if this fails, proceed with the
* recovery sequence below
*/
err_mask = ata_do_dev_read_id(dev, tf, id);
if (likely(!err_mask))
return err_mask;
/* Disable host interrupts */
spin_lock_irqsave(&host->lock, flags);
ctl = readl(mmio + HOST_CTL);
ctl &= ~HOST_IRQ_EN;
writel(ctl, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
spin_unlock_irqrestore(&host->lock, flags);
/* Perform the SATA PHY reset sequence */
brcm_sata_phy_disable(priv, ap->port_no);
/* Reset the SATA clock */
ahci_platform_disable_clks(hpriv);
msleep(10);
ahci_platform_enable_clks(hpriv);
msleep(10);
/* Bring the PHY back on */
brcm_sata_phy_enable(priv, ap->port_no);
/* Re-initialize and calibrate the PHY */
for (i = 0; i < hpriv->nports; i++) {
rc = phy_init(hpriv->phys[i]);
if (rc)
goto disable_phys;
rc = phy_calibrate(hpriv->phys[i]);
if (rc) {
phy_exit(hpriv->phys[i]);
goto disable_phys;
}
}
/* Re-enable host interrupts */
spin_lock_irqsave(&host->lock, flags);
ctl = readl(mmio + HOST_CTL);
ctl |= HOST_IRQ_EN;
writel(ctl, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
spin_unlock_irqrestore(&host->lock, flags);
return ata_do_dev_read_id(dev, tf, id);
disable_phys:
while (--i >= 0) {
phy_power_off(hpriv->phys[i]);
phy_exit(hpriv->phys[i]);
}
return AC_ERR_OTHER;
}
static void brcm_ahci_host_stop(struct ata_host *host)
{
struct ahci_host_priv *hpriv = host->private_data;
ahci_platform_disable_resources(hpriv);
}
static struct ata_port_operations ahci_brcm_platform_ops = {
.inherits = &ahci_ops,
.host_stop = brcm_ahci_host_stop,
.read_id = brcm_ahci_read_id,
};
static const struct ata_port_info ahci_brcm_port_info = {
.flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
.link_flags = ATA_LFLAG_NO_DEBOUNCE_DELAY,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_brcm_platform_ops,
};
static int brcm_ahci_suspend(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
struct brcm_ahci_priv *priv = hpriv->plat_data;
int ret;
brcm_sata_phys_disable(priv);
if (IS_ENABLED(CONFIG_PM_SLEEP))
ret = ahci_platform_suspend(dev);
else
ret = 0;
reset_control_assert(priv->rcdev_ahci);
reset_control_rearm(priv->rcdev_rescal);
return ret;
}
static int __maybe_unused brcm_ahci_resume(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
struct brcm_ahci_priv *priv = hpriv->plat_data;
int ret = 0;
ret = reset_control_deassert(priv->rcdev_ahci);
if (ret)
return ret;
ret = reset_control_reset(priv->rcdev_rescal);
if (ret)
return ret;
/* Make sure clocks are turned on before re-configuration */
ret = ahci_platform_enable_clks(hpriv);
if (ret)
return ret;
ret = ahci_platform_enable_regulators(hpriv);
if (ret)
goto out_disable_clks;
brcm_sata_init(priv);
brcm_sata_phys_enable(priv);
brcm_sata_alpm_init(hpriv);
/* Since we had to enable clocks earlier on, we cannot use
* ahci_platform_resume() as-is since a second call to
* ahci_platform_enable_resources() would bump up the resources
* (regulators, clocks, PHYs) count artificially so we copy the part
* after ahci_platform_enable_resources().
*/
ret = ahci_platform_enable_phys(hpriv);
if (ret)
goto out_disable_phys;
ret = ahci_platform_resume_host(dev);
if (ret)
goto out_disable_platform_phys;
/* We resumed so update PM runtime state */
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
return 0;
out_disable_platform_phys:
ahci_platform_disable_phys(hpriv);
out_disable_phys:
brcm_sata_phys_disable(priv);
ahci_platform_disable_regulators(hpriv);
out_disable_clks:
ahci_platform_disable_clks(hpriv);
return ret;
}
static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT(DRV_NAME),
};
static const struct of_device_id ahci_of_match[] = {
{.compatible = "brcm,bcm7425-ahci", .data = (void *)BRCM_SATA_BCM7425},
{.compatible = "brcm,bcm7445-ahci", .data = (void *)BRCM_SATA_BCM7445},
{.compatible = "brcm,bcm63138-ahci", .data = (void *)BRCM_SATA_BCM7445},
{.compatible = "brcm,bcm-nsp-ahci", .data = (void *)BRCM_SATA_NSP},
{.compatible = "brcm,bcm7216-ahci", .data = (void *)BRCM_SATA_BCM7216},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
static int brcm_ahci_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id;
struct device *dev = &pdev->dev;
struct brcm_ahci_priv *priv;
struct ahci_host_priv *hpriv;
struct resource *res;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
of_id = of_match_node(ahci_of_match, pdev->dev.of_node);
if (!of_id)
return -ENODEV;
priv->version = (enum brcm_ahci_version)of_id->data;
priv->dev = dev;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
priv->top_ctrl = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->top_ctrl))
return PTR_ERR(priv->top_ctrl);
if (priv->version == BRCM_SATA_BCM7216) {
priv->rcdev_rescal = devm_reset_control_get_optional_shared(
&pdev->dev, "rescal");
if (IS_ERR(priv->rcdev_rescal))
return PTR_ERR(priv->rcdev_rescal);
}
priv->rcdev_ahci = devm_reset_control_get_optional(&pdev->dev, "ahci");
if (IS_ERR(priv->rcdev_ahci))
return PTR_ERR(priv->rcdev_ahci);
hpriv = ahci_platform_get_resources(pdev, 0);
if (IS_ERR(hpriv))
return PTR_ERR(hpriv);
hpriv->plat_data = priv;
hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP | AHCI_HFLAG_NO_WRITE_TO_RO;
switch (priv->version) {
case BRCM_SATA_BCM7425:
hpriv->flags |= AHCI_HFLAG_DELAY_ENGINE;
fallthrough;
case BRCM_SATA_NSP:
hpriv->flags |= AHCI_HFLAG_NO_NCQ;
priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
break;
default:
break;
}
ret = reset_control_reset(priv->rcdev_rescal);
if (ret)
return ret;
ret = reset_control_deassert(priv->rcdev_ahci);
if (ret)
return ret;
ret = ahci_platform_enable_clks(hpriv);
if (ret)
goto out_reset;
ret = ahci_platform_enable_regulators(hpriv);
if (ret)
goto out_disable_clks;
/* Must be first so as to configure endianness including that
* of the standard AHCI register space.
*/
brcm_sata_init(priv);
/* Initializes priv->port_mask which is used below */
priv->port_mask = brcm_ahci_get_portmask(hpriv, priv);
if (!priv->port_mask) {
ret = -ENODEV;
goto out_disable_regulators;
}
/* Must be done before ahci_platform_enable_phys() */
brcm_sata_phys_enable(priv);
brcm_sata_alpm_init(hpriv);
ret = ahci_platform_enable_phys(hpriv);
if (ret)
goto out_disable_phys;
ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
&ahci_platform_sht);
if (ret)
goto out_disable_platform_phys;
dev_info(dev, "Broadcom AHCI SATA3 registered\n");
return 0;
out_disable_platform_phys:
ahci_platform_disable_phys(hpriv);
out_disable_phys:
brcm_sata_phys_disable(priv);
out_disable_regulators:
ahci_platform_disable_regulators(hpriv);
out_disable_clks:
ahci_platform_disable_clks(hpriv);
out_reset:
reset_control_assert(priv->rcdev_ahci);
reset_control_rearm(priv->rcdev_rescal);
return ret;
}
static int brcm_ahci_remove(struct platform_device *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
struct ahci_host_priv *hpriv = host->private_data;
struct brcm_ahci_priv *priv = hpriv->plat_data;
int ret;
brcm_sata_phys_disable(priv);
ret = ata_platform_remove_one(pdev);
if (ret)
return ret;
return 0;
}
static void brcm_ahci_shutdown(struct platform_device *pdev)
{
int ret;
/* All resources releasing happens via devres, but our device, unlike a
* proper remove is not disappearing, therefore using
* brcm_ahci_suspend() here which does explicit power management is
* appropriate.
*/
ret = brcm_ahci_suspend(&pdev->dev);
if (ret)
dev_err(&pdev->dev, "failed to shutdown\n");
}
static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
static struct platform_driver brcm_ahci_driver = {
.probe = brcm_ahci_probe,
.remove = brcm_ahci_remove,
.shutdown = brcm_ahci_shutdown,
.driver = {
.name = DRV_NAME,
.of_match_table = ahci_of_match,
.pm = &ahci_brcm_pm_ops,
},
};
module_platform_driver(brcm_ahci_driver);
MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver");
MODULE_AUTHOR("Brian Norris");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:sata-brcmstb");