mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 17:08:10 +00:00
5a368fb65a
Don't populate the read-only arrays possible_strength and spare_size on the stack but instead make them static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220307230940.169235-1-colin.i.king@gmail.com
879 lines
23 KiB
C
879 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Support for Macronix external hardware ECC engine for NAND devices, also
|
|
* called DPE for Data Processing Engine.
|
|
*
|
|
* Copyright © 2019 Macronix
|
|
* Author: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
*/
|
|
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/nand-ecc-mxic.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* DPE Configuration */
|
|
#define DP_CONFIG 0x00
|
|
#define ECC_EN BIT(0)
|
|
#define ECC_TYP(idx) (((idx) << 3) & GENMASK(6, 3))
|
|
/* DPE Interrupt Status */
|
|
#define INTRPT_STS 0x04
|
|
#define TRANS_CMPLT BIT(0)
|
|
#define SDMA_MAIN BIT(1)
|
|
#define SDMA_SPARE BIT(2)
|
|
#define ECC_ERR BIT(3)
|
|
#define TO_SPARE BIT(4)
|
|
#define TO_MAIN BIT(5)
|
|
/* DPE Interrupt Status Enable */
|
|
#define INTRPT_STS_EN 0x08
|
|
/* DPE Interrupt Signal Enable */
|
|
#define INTRPT_SIG_EN 0x0C
|
|
/* Host Controller Configuration */
|
|
#define HC_CONFIG 0x10
|
|
#define DEV2MEM 0 /* TRANS_TYP_DMA in the spec */
|
|
#define MEM2MEM BIT(4) /* TRANS_TYP_IO in the spec */
|
|
#define MAPPING BIT(5) /* TRANS_TYP_MAPPING in the spec */
|
|
#define ECC_PACKED 0 /* LAYOUT_TYP_INTEGRATED in the spec */
|
|
#define ECC_INTERLEAVED BIT(2) /* LAYOUT_TYP_DISTRIBUTED in the spec */
|
|
#define BURST_TYP_FIXED 0
|
|
#define BURST_TYP_INCREASING BIT(0)
|
|
/* Host Controller Slave Address */
|
|
#define HC_SLV_ADDR 0x14
|
|
/* ECC Chunk Size */
|
|
#define CHUNK_SIZE 0x20
|
|
/* Main Data Size */
|
|
#define MAIN_SIZE 0x24
|
|
/* Spare Data Size */
|
|
#define SPARE_SIZE 0x28
|
|
#define META_SZ(reg) ((reg) & GENMASK(7, 0))
|
|
#define PARITY_SZ(reg) (((reg) & GENMASK(15, 8)) >> 8)
|
|
#define RSV_SZ(reg) (((reg) & GENMASK(23, 16)) >> 16)
|
|
#define SPARE_SZ(reg) ((reg) >> 24)
|
|
/* ECC Chunk Count */
|
|
#define CHUNK_CNT 0x30
|
|
/* SDMA Control */
|
|
#define SDMA_CTRL 0x40
|
|
#define WRITE_NAND 0
|
|
#define READ_NAND BIT(1)
|
|
#define CONT_NAND BIT(29)
|
|
#define CONT_SYSM BIT(30) /* Continue System Memory? */
|
|
#define SDMA_STRT BIT(31)
|
|
/* SDMA Address of Main Data */
|
|
#define SDMA_MAIN_ADDR 0x44
|
|
/* SDMA Address of Spare Data */
|
|
#define SDMA_SPARE_ADDR 0x48
|
|
/* DPE Version Number */
|
|
#define DP_VER 0xD0
|
|
#define DP_VER_OFFSET 16
|
|
|
|
/* Status bytes between each chunk of spare data */
|
|
#define STAT_BYTES 4
|
|
#define NO_ERR 0x00
|
|
#define MAX_CORR_ERR 0x28
|
|
#define UNCORR_ERR 0xFE
|
|
#define ERASED_CHUNK 0xFF
|
|
|
|
struct mxic_ecc_engine {
|
|
struct device *dev;
|
|
void __iomem *regs;
|
|
int irq;
|
|
struct completion complete;
|
|
struct nand_ecc_engine external_engine;
|
|
struct nand_ecc_engine pipelined_engine;
|
|
struct mutex lock;
|
|
};
|
|
|
|
struct mxic_ecc_ctx {
|
|
/* ECC machinery */
|
|
unsigned int data_step_sz;
|
|
unsigned int oob_step_sz;
|
|
unsigned int parity_sz;
|
|
unsigned int meta_sz;
|
|
u8 *status;
|
|
int steps;
|
|
|
|
/* DMA boilerplate */
|
|
struct nand_ecc_req_tweak_ctx req_ctx;
|
|
u8 *oobwithstat;
|
|
struct scatterlist sg[2];
|
|
struct nand_page_io_req *req;
|
|
unsigned int pageoffs;
|
|
};
|
|
|
|
static struct mxic_ecc_engine *ext_ecc_eng_to_mxic(struct nand_ecc_engine *eng)
|
|
{
|
|
return container_of(eng, struct mxic_ecc_engine, external_engine);
|
|
}
|
|
|
|
static struct mxic_ecc_engine *pip_ecc_eng_to_mxic(struct nand_ecc_engine *eng)
|
|
{
|
|
return container_of(eng, struct mxic_ecc_engine, pipelined_engine);
|
|
}
|
|
|
|
static struct mxic_ecc_engine *nand_to_mxic(struct nand_device *nand)
|
|
{
|
|
struct nand_ecc_engine *eng = nand->ecc.engine;
|
|
|
|
if (eng->integration == NAND_ECC_ENGINE_INTEGRATION_EXTERNAL)
|
|
return ext_ecc_eng_to_mxic(eng);
|
|
else
|
|
return pip_ecc_eng_to_mxic(eng);
|
|
}
|
|
|
|
static int mxic_ecc_ooblayout_ecc(struct mtd_info *mtd, int section,
|
|
struct mtd_oob_region *oobregion)
|
|
{
|
|
struct nand_device *nand = mtd_to_nanddev(mtd);
|
|
struct mxic_ecc_ctx *ctx = nand_to_ecc_ctx(nand);
|
|
|
|
if (section < 0 || section >= ctx->steps)
|
|
return -ERANGE;
|
|
|
|
oobregion->offset = (section * ctx->oob_step_sz) + ctx->meta_sz;
|
|
oobregion->length = ctx->parity_sz;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxic_ecc_ooblayout_free(struct mtd_info *mtd, int section,
|
|
struct mtd_oob_region *oobregion)
|
|
{
|
|
struct nand_device *nand = mtd_to_nanddev(mtd);
|
|
struct mxic_ecc_ctx *ctx = nand_to_ecc_ctx(nand);
|
|
|
|
if (section < 0 || section >= ctx->steps)
|
|
return -ERANGE;
|
|
|
|
if (!section) {
|
|
oobregion->offset = 2;
|
|
oobregion->length = ctx->meta_sz - 2;
|
|
} else {
|
|
oobregion->offset = section * ctx->oob_step_sz;
|
|
oobregion->length = ctx->meta_sz;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mtd_ooblayout_ops mxic_ecc_ooblayout_ops = {
|
|
.ecc = mxic_ecc_ooblayout_ecc,
|
|
.free = mxic_ecc_ooblayout_free,
|
|
};
|
|
|
|
static void mxic_ecc_disable_engine(struct mxic_ecc_engine *mxic)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl(mxic->regs + DP_CONFIG);
|
|
reg &= ~ECC_EN;
|
|
writel(reg, mxic->regs + DP_CONFIG);
|
|
}
|
|
|
|
static void mxic_ecc_enable_engine(struct mxic_ecc_engine *mxic)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl(mxic->regs + DP_CONFIG);
|
|
reg |= ECC_EN;
|
|
writel(reg, mxic->regs + DP_CONFIG);
|
|
}
|
|
|
|
static void mxic_ecc_disable_int(struct mxic_ecc_engine *mxic)
|
|
{
|
|
writel(0, mxic->regs + INTRPT_SIG_EN);
|
|
}
|
|
|
|
static void mxic_ecc_enable_int(struct mxic_ecc_engine *mxic)
|
|
{
|
|
writel(TRANS_CMPLT, mxic->regs + INTRPT_SIG_EN);
|
|
}
|
|
|
|
static irqreturn_t mxic_ecc_isr(int irq, void *dev_id)
|
|
{
|
|
struct mxic_ecc_engine *mxic = dev_id;
|
|
u32 sts;
|
|
|
|
sts = readl(mxic->regs + INTRPT_STS);
|
|
if (!sts)
|
|
return IRQ_NONE;
|
|
|
|
if (sts & TRANS_CMPLT)
|
|
complete(&mxic->complete);
|
|
|
|
writel(sts, mxic->regs + INTRPT_STS);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mxic_ecc_init_ctx(struct nand_device *nand, struct device *dev)
|
|
{
|
|
struct mxic_ecc_engine *mxic = nand_to_mxic(nand);
|
|
struct nand_ecc_props *conf = &nand->ecc.ctx.conf;
|
|
struct nand_ecc_props *reqs = &nand->ecc.requirements;
|
|
struct nand_ecc_props *user = &nand->ecc.user_conf;
|
|
struct mtd_info *mtd = nanddev_to_mtd(nand);
|
|
int step_size = 0, strength = 0, desired_correction = 0, steps, idx;
|
|
static const int possible_strength[] = {4, 8, 40, 48};
|
|
static const int spare_size[] = {32, 32, 96, 96};
|
|
struct mxic_ecc_ctx *ctx;
|
|
u32 spare_reg;
|
|
int ret;
|
|
|
|
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
nand->ecc.ctx.priv = ctx;
|
|
|
|
/* Only large page NAND chips may use BCH */
|
|
if (mtd->oobsize < 64) {
|
|
pr_err("BCH cannot be used with small page NAND chips\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mtd_set_ooblayout(mtd, &mxic_ecc_ooblayout_ops);
|
|
|
|
/* Enable all status bits */
|
|
writel(TRANS_CMPLT | SDMA_MAIN | SDMA_SPARE | ECC_ERR |
|
|
TO_SPARE | TO_MAIN, mxic->regs + INTRPT_STS_EN);
|
|
|
|
/* Configure the correction depending on the NAND device topology */
|
|
if (user->step_size && user->strength) {
|
|
step_size = user->step_size;
|
|
strength = user->strength;
|
|
} else if (reqs->step_size && reqs->strength) {
|
|
step_size = reqs->step_size;
|
|
strength = reqs->strength;
|
|
}
|
|
|
|
if (step_size && strength) {
|
|
steps = mtd->writesize / step_size;
|
|
desired_correction = steps * strength;
|
|
}
|
|
|
|
/* Step size is fixed to 1kiB, strength may vary (4 possible values) */
|
|
conf->step_size = SZ_1K;
|
|
steps = mtd->writesize / conf->step_size;
|
|
|
|
ctx->status = devm_kzalloc(dev, steps * sizeof(u8), GFP_KERNEL);
|
|
if (!ctx->status)
|
|
return -ENOMEM;
|
|
|
|
if (desired_correction) {
|
|
strength = desired_correction / steps;
|
|
|
|
for (idx = 0; idx < ARRAY_SIZE(possible_strength); idx++)
|
|
if (possible_strength[idx] >= strength)
|
|
break;
|
|
|
|
idx = min_t(unsigned int, idx,
|
|
ARRAY_SIZE(possible_strength) - 1);
|
|
} else {
|
|
/* Missing data, maximize the correction */
|
|
idx = ARRAY_SIZE(possible_strength) - 1;
|
|
}
|
|
|
|
/* Tune the selected strength until it fits in the OOB area */
|
|
for (; idx >= 0; idx--) {
|
|
if (spare_size[idx] * steps <= mtd->oobsize)
|
|
break;
|
|
}
|
|
|
|
/* This engine cannot be used with this NAND device */
|
|
if (idx < 0)
|
|
return -EINVAL;
|
|
|
|
/* Configure the engine for the desired strength */
|
|
writel(ECC_TYP(idx), mxic->regs + DP_CONFIG);
|
|
conf->strength = possible_strength[idx];
|
|
spare_reg = readl(mxic->regs + SPARE_SIZE);
|
|
|
|
ctx->steps = steps;
|
|
ctx->data_step_sz = mtd->writesize / steps;
|
|
ctx->oob_step_sz = mtd->oobsize / steps;
|
|
ctx->parity_sz = PARITY_SZ(spare_reg);
|
|
ctx->meta_sz = META_SZ(spare_reg);
|
|
|
|
/* Ensure buffers will contain enough bytes to store the STAT_BYTES */
|
|
ctx->req_ctx.oob_buffer_size = nanddev_per_page_oobsize(nand) +
|
|
(ctx->steps * STAT_BYTES);
|
|
ret = nand_ecc_init_req_tweaking(&ctx->req_ctx, nand);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ctx->oobwithstat = kmalloc(mtd->oobsize + (ctx->steps * STAT_BYTES),
|
|
GFP_KERNEL);
|
|
if (!ctx->oobwithstat) {
|
|
ret = -ENOMEM;
|
|
goto cleanup_req_tweak;
|
|
}
|
|
|
|
sg_init_table(ctx->sg, 2);
|
|
|
|
/* Configuration dump and sanity checks */
|
|
dev_err(dev, "DPE version number: %d\n",
|
|
readl(mxic->regs + DP_VER) >> DP_VER_OFFSET);
|
|
dev_err(dev, "Chunk size: %d\n", readl(mxic->regs + CHUNK_SIZE));
|
|
dev_err(dev, "Main size: %d\n", readl(mxic->regs + MAIN_SIZE));
|
|
dev_err(dev, "Spare size: %d\n", SPARE_SZ(spare_reg));
|
|
dev_err(dev, "Rsv size: %ld\n", RSV_SZ(spare_reg));
|
|
dev_err(dev, "Parity size: %d\n", ctx->parity_sz);
|
|
dev_err(dev, "Meta size: %d\n", ctx->meta_sz);
|
|
|
|
if ((ctx->meta_sz + ctx->parity_sz + RSV_SZ(spare_reg)) !=
|
|
SPARE_SZ(spare_reg)) {
|
|
dev_err(dev, "Wrong OOB configuration: %d + %d + %ld != %d\n",
|
|
ctx->meta_sz, ctx->parity_sz, RSV_SZ(spare_reg),
|
|
SPARE_SZ(spare_reg));
|
|
ret = -EINVAL;
|
|
goto free_oobwithstat;
|
|
}
|
|
|
|
if (ctx->oob_step_sz != SPARE_SZ(spare_reg)) {
|
|
dev_err(dev, "Wrong OOB configuration: %d != %d\n",
|
|
ctx->oob_step_sz, SPARE_SZ(spare_reg));
|
|
ret = -EINVAL;
|
|
goto free_oobwithstat;
|
|
}
|
|
|
|
return 0;
|
|
|
|
free_oobwithstat:
|
|
kfree(ctx->oobwithstat);
|
|
cleanup_req_tweak:
|
|
nand_ecc_cleanup_req_tweaking(&ctx->req_ctx);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxic_ecc_init_ctx_external(struct nand_device *nand)
|
|
{
|
|
struct mxic_ecc_engine *mxic = nand_to_mxic(nand);
|
|
struct device *dev = nand->ecc.engine->dev;
|
|
int ret;
|
|
|
|
dev_info(dev, "Macronix ECC engine in external mode\n");
|
|
|
|
ret = mxic_ecc_init_ctx(nand, dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Trigger each step manually */
|
|
writel(1, mxic->regs + CHUNK_CNT);
|
|
writel(BURST_TYP_INCREASING | ECC_PACKED | MEM2MEM,
|
|
mxic->regs + HC_CONFIG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxic_ecc_init_ctx_pipelined(struct nand_device *nand)
|
|
{
|
|
struct mxic_ecc_engine *mxic = nand_to_mxic(nand);
|
|
struct mxic_ecc_ctx *ctx;
|
|
struct device *dev;
|
|
int ret;
|
|
|
|
dev = nand_ecc_get_engine_dev(nand->ecc.engine->dev);
|
|
if (!dev)
|
|
return -EINVAL;
|
|
|
|
dev_info(dev, "Macronix ECC engine in pipelined/mapping mode\n");
|
|
|
|
ret = mxic_ecc_init_ctx(nand, dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ctx = nand_to_ecc_ctx(nand);
|
|
|
|
/* All steps should be handled in one go directly by the internal DMA */
|
|
writel(ctx->steps, mxic->regs + CHUNK_CNT);
|
|
|
|
/*
|
|
* Interleaved ECC scheme cannot be used otherwise factory bad block
|
|
* markers would be lost. A packed layout is mandatory.
|
|
*/
|
|
writel(BURST_TYP_INCREASING | ECC_PACKED | MAPPING,
|
|
mxic->regs + HC_CONFIG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxic_ecc_cleanup_ctx(struct nand_device *nand)
|
|
{
|
|
struct mxic_ecc_ctx *ctx = nand_to_ecc_ctx(nand);
|
|
|
|
if (ctx) {
|
|
nand_ecc_cleanup_req_tweaking(&ctx->req_ctx);
|
|
kfree(ctx->oobwithstat);
|
|
}
|
|
}
|
|
|
|
static int mxic_ecc_data_xfer_wait_for_completion(struct mxic_ecc_engine *mxic)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
if (mxic->irq) {
|
|
reinit_completion(&mxic->complete);
|
|
mxic_ecc_enable_int(mxic);
|
|
ret = wait_for_completion_timeout(&mxic->complete,
|
|
msecs_to_jiffies(1000));
|
|
mxic_ecc_disable_int(mxic);
|
|
} else {
|
|
ret = readl_poll_timeout(mxic->regs + INTRPT_STS, val,
|
|
val & TRANS_CMPLT, 10, USEC_PER_SEC);
|
|
writel(val, mxic->regs + INTRPT_STS);
|
|
}
|
|
|
|
if (ret) {
|
|
dev_err(mxic->dev, "Timeout on data xfer completion\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxic_ecc_process_data(struct mxic_ecc_engine *mxic,
|
|
unsigned int direction)
|
|
{
|
|
unsigned int dir = (direction == NAND_PAGE_READ) ?
|
|
READ_NAND : WRITE_NAND;
|
|
int ret;
|
|
|
|
mxic_ecc_enable_engine(mxic);
|
|
|
|
/* Trigger processing */
|
|
writel(SDMA_STRT | dir, mxic->regs + SDMA_CTRL);
|
|
|
|
/* Wait for completion */
|
|
ret = mxic_ecc_data_xfer_wait_for_completion(mxic);
|
|
|
|
mxic_ecc_disable_engine(mxic);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int mxic_ecc_process_data_pipelined(struct nand_ecc_engine *eng,
|
|
unsigned int direction, dma_addr_t dirmap)
|
|
{
|
|
struct mxic_ecc_engine *mxic = pip_ecc_eng_to_mxic(eng);
|
|
|
|
if (dirmap)
|
|
writel(dirmap, mxic->regs + HC_SLV_ADDR);
|
|
|
|
return mxic_ecc_process_data(mxic, direction);
|
|
}
|
|
EXPORT_SYMBOL_GPL(mxic_ecc_process_data_pipelined);
|
|
|
|
static void mxic_ecc_extract_status_bytes(struct mxic_ecc_ctx *ctx)
|
|
{
|
|
u8 *buf = ctx->oobwithstat;
|
|
int next_stat_pos;
|
|
int step;
|
|
|
|
/* Extract the ECC status */
|
|
for (step = 0; step < ctx->steps; step++) {
|
|
next_stat_pos = ctx->oob_step_sz +
|
|
((STAT_BYTES + ctx->oob_step_sz) * step);
|
|
|
|
ctx->status[step] = buf[next_stat_pos];
|
|
}
|
|
}
|
|
|
|
static void mxic_ecc_reconstruct_oobbuf(struct mxic_ecc_ctx *ctx,
|
|
u8 *dst, const u8 *src)
|
|
{
|
|
int step;
|
|
|
|
/* Reconstruct the OOB buffer linearly (without the ECC status bytes) */
|
|
for (step = 0; step < ctx->steps; step++)
|
|
memcpy(dst + (step * ctx->oob_step_sz),
|
|
src + (step * (ctx->oob_step_sz + STAT_BYTES)),
|
|
ctx->oob_step_sz);
|
|
}
|
|
|
|
static void mxic_ecc_add_room_in_oobbuf(struct mxic_ecc_ctx *ctx,
|
|
u8 *dst, const u8 *src)
|
|
{
|
|
int step;
|
|
|
|
/* Add some space in the OOB buffer for the status bytes */
|
|
for (step = 0; step < ctx->steps; step++)
|
|
memcpy(dst + (step * (ctx->oob_step_sz + STAT_BYTES)),
|
|
src + (step * ctx->oob_step_sz),
|
|
ctx->oob_step_sz);
|
|
}
|
|
|
|
static int mxic_ecc_count_biterrs(struct mxic_ecc_engine *mxic,
|
|
struct nand_device *nand)
|
|
{
|
|
struct mxic_ecc_ctx *ctx = nand_to_ecc_ctx(nand);
|
|
struct mtd_info *mtd = nanddev_to_mtd(nand);
|
|
struct device *dev = mxic->dev;
|
|
unsigned int max_bf = 0;
|
|
bool failure = false;
|
|
int step;
|
|
|
|
for (step = 0; step < ctx->steps; step++) {
|
|
u8 stat = ctx->status[step];
|
|
|
|
if (stat == NO_ERR) {
|
|
dev_dbg(dev, "ECC step %d: no error\n", step);
|
|
} else if (stat == ERASED_CHUNK) {
|
|
dev_dbg(dev, "ECC step %d: erased\n", step);
|
|
} else if (stat == UNCORR_ERR || stat > MAX_CORR_ERR) {
|
|
dev_dbg(dev, "ECC step %d: uncorrectable\n", step);
|
|
mtd->ecc_stats.failed++;
|
|
failure = true;
|
|
} else {
|
|
dev_dbg(dev, "ECC step %d: %d bits corrected\n",
|
|
step, stat);
|
|
max_bf = max_t(unsigned int, max_bf, stat);
|
|
mtd->ecc_stats.corrected += stat;
|
|
}
|
|
}
|
|
|
|
return failure ? -EBADMSG : max_bf;
|
|
}
|
|
|
|
/* External ECC engine helpers */
|
|
static int mxic_ecc_prepare_io_req_external(struct nand_device *nand,
|
|
struct nand_page_io_req *req)
|
|
{
|
|
struct mxic_ecc_engine *mxic = nand_to_mxic(nand);
|
|
struct mxic_ecc_ctx *ctx = nand_to_ecc_ctx(nand);
|
|
struct mtd_info *mtd = nanddev_to_mtd(nand);
|
|
int offset, nents, step, ret;
|
|
|
|
if (req->mode == MTD_OPS_RAW)
|
|
return 0;
|
|
|
|
nand_ecc_tweak_req(&ctx->req_ctx, req);
|
|
ctx->req = req;
|
|
|
|
if (req->type == NAND_PAGE_READ)
|
|
return 0;
|
|
|
|
mxic_ecc_add_room_in_oobbuf(ctx, ctx->oobwithstat,
|
|
ctx->req->oobbuf.out);
|
|
|
|
sg_set_buf(&ctx->sg[0], req->databuf.out, req->datalen);
|
|
sg_set_buf(&ctx->sg[1], ctx->oobwithstat,
|
|
req->ooblen + (ctx->steps * STAT_BYTES));
|
|
|
|
nents = dma_map_sg(mxic->dev, ctx->sg, 2, DMA_BIDIRECTIONAL);
|
|
if (!nents)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&mxic->lock);
|
|
|
|
for (step = 0; step < ctx->steps; step++) {
|
|
writel(sg_dma_address(&ctx->sg[0]) + (step * ctx->data_step_sz),
|
|
mxic->regs + SDMA_MAIN_ADDR);
|
|
writel(sg_dma_address(&ctx->sg[1]) + (step * (ctx->oob_step_sz + STAT_BYTES)),
|
|
mxic->regs + SDMA_SPARE_ADDR);
|
|
ret = mxic_ecc_process_data(mxic, ctx->req->type);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&mxic->lock);
|
|
|
|
dma_unmap_sg(mxic->dev, ctx->sg, 2, DMA_BIDIRECTIONAL);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Retrieve the calculated ECC bytes */
|
|
for (step = 0; step < ctx->steps; step++) {
|
|
offset = ctx->meta_sz + (step * ctx->oob_step_sz);
|
|
mtd_ooblayout_get_eccbytes(mtd,
|
|
(u8 *)ctx->req->oobbuf.out + offset,
|
|
ctx->oobwithstat + (step * STAT_BYTES),
|
|
step * ctx->parity_sz,
|
|
ctx->parity_sz);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxic_ecc_finish_io_req_external(struct nand_device *nand,
|
|
struct nand_page_io_req *req)
|
|
{
|
|
struct mxic_ecc_engine *mxic = nand_to_mxic(nand);
|
|
struct mxic_ecc_ctx *ctx = nand_to_ecc_ctx(nand);
|
|
int nents, step, ret;
|
|
|
|
if (req->mode == MTD_OPS_RAW)
|
|
return 0;
|
|
|
|
if (req->type == NAND_PAGE_WRITE) {
|
|
nand_ecc_restore_req(&ctx->req_ctx, req);
|
|
return 0;
|
|
}
|
|
|
|
/* Copy the OOB buffer and add room for the ECC engine status bytes */
|
|
mxic_ecc_add_room_in_oobbuf(ctx, ctx->oobwithstat, ctx->req->oobbuf.in);
|
|
|
|
sg_set_buf(&ctx->sg[0], req->databuf.in, req->datalen);
|
|
sg_set_buf(&ctx->sg[1], ctx->oobwithstat,
|
|
req->ooblen + (ctx->steps * STAT_BYTES));
|
|
nents = dma_map_sg(mxic->dev, ctx->sg, 2, DMA_BIDIRECTIONAL);
|
|
if (!nents)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&mxic->lock);
|
|
|
|
for (step = 0; step < ctx->steps; step++) {
|
|
writel(sg_dma_address(&ctx->sg[0]) + (step * ctx->data_step_sz),
|
|
mxic->regs + SDMA_MAIN_ADDR);
|
|
writel(sg_dma_address(&ctx->sg[1]) + (step * (ctx->oob_step_sz + STAT_BYTES)),
|
|
mxic->regs + SDMA_SPARE_ADDR);
|
|
ret = mxic_ecc_process_data(mxic, ctx->req->type);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&mxic->lock);
|
|
|
|
dma_unmap_sg(mxic->dev, ctx->sg, 2, DMA_BIDIRECTIONAL);
|
|
|
|
if (ret) {
|
|
nand_ecc_restore_req(&ctx->req_ctx, req);
|
|
return ret;
|
|
}
|
|
|
|
/* Extract the status bytes and reconstruct the buffer */
|
|
mxic_ecc_extract_status_bytes(ctx);
|
|
mxic_ecc_reconstruct_oobbuf(ctx, ctx->req->oobbuf.in, ctx->oobwithstat);
|
|
|
|
nand_ecc_restore_req(&ctx->req_ctx, req);
|
|
|
|
return mxic_ecc_count_biterrs(mxic, nand);
|
|
}
|
|
|
|
/* Pipelined ECC engine helpers */
|
|
static int mxic_ecc_prepare_io_req_pipelined(struct nand_device *nand,
|
|
struct nand_page_io_req *req)
|
|
{
|
|
struct mxic_ecc_engine *mxic = nand_to_mxic(nand);
|
|
struct mxic_ecc_ctx *ctx = nand_to_ecc_ctx(nand);
|
|
int nents;
|
|
|
|
if (req->mode == MTD_OPS_RAW)
|
|
return 0;
|
|
|
|
nand_ecc_tweak_req(&ctx->req_ctx, req);
|
|
ctx->req = req;
|
|
|
|
/* Copy the OOB buffer and add room for the ECC engine status bytes */
|
|
mxic_ecc_add_room_in_oobbuf(ctx, ctx->oobwithstat, ctx->req->oobbuf.in);
|
|
|
|
sg_set_buf(&ctx->sg[0], req->databuf.in, req->datalen);
|
|
sg_set_buf(&ctx->sg[1], ctx->oobwithstat,
|
|
req->ooblen + (ctx->steps * STAT_BYTES));
|
|
|
|
nents = dma_map_sg(mxic->dev, ctx->sg, 2, DMA_BIDIRECTIONAL);
|
|
if (!nents)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&mxic->lock);
|
|
|
|
writel(sg_dma_address(&ctx->sg[0]), mxic->regs + SDMA_MAIN_ADDR);
|
|
writel(sg_dma_address(&ctx->sg[1]), mxic->regs + SDMA_SPARE_ADDR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxic_ecc_finish_io_req_pipelined(struct nand_device *nand,
|
|
struct nand_page_io_req *req)
|
|
{
|
|
struct mxic_ecc_engine *mxic = nand_to_mxic(nand);
|
|
struct mxic_ecc_ctx *ctx = nand_to_ecc_ctx(nand);
|
|
int ret = 0;
|
|
|
|
if (req->mode == MTD_OPS_RAW)
|
|
return 0;
|
|
|
|
mutex_unlock(&mxic->lock);
|
|
|
|
dma_unmap_sg(mxic->dev, ctx->sg, 2, DMA_BIDIRECTIONAL);
|
|
|
|
if (req->type == NAND_PAGE_READ) {
|
|
mxic_ecc_extract_status_bytes(ctx);
|
|
mxic_ecc_reconstruct_oobbuf(ctx, ctx->req->oobbuf.in,
|
|
ctx->oobwithstat);
|
|
ret = mxic_ecc_count_biterrs(mxic, nand);
|
|
}
|
|
|
|
nand_ecc_restore_req(&ctx->req_ctx, req);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct nand_ecc_engine_ops mxic_ecc_engine_external_ops = {
|
|
.init_ctx = mxic_ecc_init_ctx_external,
|
|
.cleanup_ctx = mxic_ecc_cleanup_ctx,
|
|
.prepare_io_req = mxic_ecc_prepare_io_req_external,
|
|
.finish_io_req = mxic_ecc_finish_io_req_external,
|
|
};
|
|
|
|
static struct nand_ecc_engine_ops mxic_ecc_engine_pipelined_ops = {
|
|
.init_ctx = mxic_ecc_init_ctx_pipelined,
|
|
.cleanup_ctx = mxic_ecc_cleanup_ctx,
|
|
.prepare_io_req = mxic_ecc_prepare_io_req_pipelined,
|
|
.finish_io_req = mxic_ecc_finish_io_req_pipelined,
|
|
};
|
|
|
|
struct nand_ecc_engine_ops *mxic_ecc_get_pipelined_ops(void)
|
|
{
|
|
return &mxic_ecc_engine_pipelined_ops;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mxic_ecc_get_pipelined_ops);
|
|
|
|
static struct platform_device *
|
|
mxic_ecc_get_pdev(struct platform_device *spi_pdev)
|
|
{
|
|
struct platform_device *eng_pdev;
|
|
struct device_node *np;
|
|
|
|
/* Retrieve the nand-ecc-engine phandle */
|
|
np = of_parse_phandle(spi_pdev->dev.of_node, "nand-ecc-engine", 0);
|
|
if (!np)
|
|
return NULL;
|
|
|
|
/* Jump to the engine's device node */
|
|
eng_pdev = of_find_device_by_node(np);
|
|
of_node_put(np);
|
|
|
|
return eng_pdev;
|
|
}
|
|
|
|
void mxic_ecc_put_pipelined_engine(struct nand_ecc_engine *eng)
|
|
{
|
|
struct mxic_ecc_engine *mxic = pip_ecc_eng_to_mxic(eng);
|
|
|
|
platform_device_put(to_platform_device(mxic->dev));
|
|
}
|
|
EXPORT_SYMBOL_GPL(mxic_ecc_put_pipelined_engine);
|
|
|
|
struct nand_ecc_engine *
|
|
mxic_ecc_get_pipelined_engine(struct platform_device *spi_pdev)
|
|
{
|
|
struct platform_device *eng_pdev;
|
|
struct mxic_ecc_engine *mxic;
|
|
|
|
eng_pdev = mxic_ecc_get_pdev(spi_pdev);
|
|
if (!eng_pdev)
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
mxic = platform_get_drvdata(eng_pdev);
|
|
if (!mxic) {
|
|
platform_device_put(eng_pdev);
|
|
return ERR_PTR(-EPROBE_DEFER);
|
|
}
|
|
|
|
return &mxic->pipelined_engine;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mxic_ecc_get_pipelined_engine);
|
|
|
|
/*
|
|
* Only the external ECC engine is exported as the pipelined is SoC specific, so
|
|
* it is registered directly by the drivers that wrap it.
|
|
*/
|
|
static int mxic_ecc_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct mxic_ecc_engine *mxic;
|
|
int ret;
|
|
|
|
mxic = devm_kzalloc(&pdev->dev, sizeof(*mxic), GFP_KERNEL);
|
|
if (!mxic)
|
|
return -ENOMEM;
|
|
|
|
mxic->dev = &pdev->dev;
|
|
|
|
/*
|
|
* Both memory regions for the ECC engine itself and the AXI slave
|
|
* address are mandatory.
|
|
*/
|
|
mxic->regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(mxic->regs)) {
|
|
dev_err(&pdev->dev, "Missing memory region\n");
|
|
return PTR_ERR(mxic->regs);
|
|
}
|
|
|
|
mxic_ecc_disable_engine(mxic);
|
|
mxic_ecc_disable_int(mxic);
|
|
|
|
/* IRQ is optional yet much more efficient */
|
|
mxic->irq = platform_get_irq_byname_optional(pdev, "ecc-engine");
|
|
if (mxic->irq > 0) {
|
|
ret = devm_request_irq(&pdev->dev, mxic->irq, mxic_ecc_isr, 0,
|
|
"mxic-ecc", mxic);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
dev_info(dev, "Invalid or missing IRQ, fallback to polling\n");
|
|
mxic->irq = 0;
|
|
}
|
|
|
|
mutex_init(&mxic->lock);
|
|
|
|
/*
|
|
* In external mode, the device is the ECC engine. In pipelined mode,
|
|
* the device is the host controller. The device is used to match the
|
|
* right ECC engine based on the DT properties.
|
|
*/
|
|
mxic->external_engine.dev = &pdev->dev;
|
|
mxic->external_engine.integration = NAND_ECC_ENGINE_INTEGRATION_EXTERNAL;
|
|
mxic->external_engine.ops = &mxic_ecc_engine_external_ops;
|
|
|
|
nand_ecc_register_on_host_hw_engine(&mxic->external_engine);
|
|
|
|
platform_set_drvdata(pdev, mxic);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxic_ecc_remove(struct platform_device *pdev)
|
|
{
|
|
struct mxic_ecc_engine *mxic = platform_get_drvdata(pdev);
|
|
|
|
nand_ecc_unregister_on_host_hw_engine(&mxic->external_engine);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mxic_ecc_of_ids[] = {
|
|
{
|
|
.compatible = "mxicy,nand-ecc-engine-rev3",
|
|
},
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mxic_ecc_of_ids);
|
|
|
|
static struct platform_driver mxic_ecc_driver = {
|
|
.driver = {
|
|
.name = "mxic-nand-ecc-engine",
|
|
.of_match_table = mxic_ecc_of_ids,
|
|
},
|
|
.probe = mxic_ecc_probe,
|
|
.remove = mxic_ecc_remove,
|
|
};
|
|
module_platform_driver(mxic_ecc_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
|
|
MODULE_DESCRIPTION("Macronix NAND hardware ECC controller");
|