linux-stable/drivers/mfd/sprd-sc27xx-spi.c
Mark Brown c5c7f06771 mfd: sprd: Add SPI device ID table
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.

Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210924143347.14721-4-broonie@kernel.org
2021-11-05 14:40:25 +00:00

279 lines
6.9 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2017 Spreadtrum Communications Inc.
*/
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mfd/core.h>
#include <linux/mfd/sc27xx-pmic.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
#include <uapi/linux/usb/charger.h>
#define SPRD_PMIC_INT_MASK_STATUS 0x0
#define SPRD_PMIC_INT_RAW_STATUS 0x4
#define SPRD_PMIC_INT_EN 0x8
#define SPRD_SC2730_IRQ_BASE 0x80
#define SPRD_SC2730_IRQ_NUMS 10
#define SPRD_SC2730_CHG_DET 0x1b9c
#define SPRD_SC2731_IRQ_BASE 0x140
#define SPRD_SC2731_IRQ_NUMS 16
#define SPRD_SC2731_CHG_DET 0xedc
/* PMIC charger detection definition */
#define SPRD_PMIC_CHG_DET_DELAY_US 200000
#define SPRD_PMIC_CHG_DET_TIMEOUT 2000000
#define SPRD_PMIC_CHG_DET_DONE BIT(11)
#define SPRD_PMIC_SDP_TYPE BIT(7)
#define SPRD_PMIC_DCP_TYPE BIT(6)
#define SPRD_PMIC_CDP_TYPE BIT(5)
#define SPRD_PMIC_CHG_TYPE_MASK GENMASK(7, 5)
struct sprd_pmic {
struct regmap *regmap;
struct device *dev;
struct regmap_irq *irqs;
struct regmap_irq_chip irq_chip;
struct regmap_irq_chip_data *irq_data;
const struct sprd_pmic_data *pdata;
int irq;
};
struct sprd_pmic_data {
u32 irq_base;
u32 num_irqs;
u32 charger_det;
};
/*
* Since different PMICs of SC27xx series can have different interrupt
* base address and irq number, we should save irq number and irq base
* in the device data structure.
*/
static const struct sprd_pmic_data sc2730_data = {
.irq_base = SPRD_SC2730_IRQ_BASE,
.num_irqs = SPRD_SC2730_IRQ_NUMS,
.charger_det = SPRD_SC2730_CHG_DET,
};
static const struct sprd_pmic_data sc2731_data = {
.irq_base = SPRD_SC2731_IRQ_BASE,
.num_irqs = SPRD_SC2731_IRQ_NUMS,
.charger_det = SPRD_SC2731_CHG_DET,
};
enum usb_charger_type sprd_pmic_detect_charger_type(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
struct sprd_pmic *ddata = spi_get_drvdata(spi);
const struct sprd_pmic_data *pdata = ddata->pdata;
enum usb_charger_type type;
u32 val;
int ret;
ret = regmap_read_poll_timeout(ddata->regmap, pdata->charger_det, val,
(val & SPRD_PMIC_CHG_DET_DONE),
SPRD_PMIC_CHG_DET_DELAY_US,
SPRD_PMIC_CHG_DET_TIMEOUT);
if (ret) {
dev_err(&spi->dev, "failed to detect charger type\n");
return UNKNOWN_TYPE;
}
switch (val & SPRD_PMIC_CHG_TYPE_MASK) {
case SPRD_PMIC_CDP_TYPE:
type = CDP_TYPE;
break;
case SPRD_PMIC_DCP_TYPE:
type = DCP_TYPE;
break;
case SPRD_PMIC_SDP_TYPE:
type = SDP_TYPE;
break;
default:
type = UNKNOWN_TYPE;
break;
}
return type;
}
EXPORT_SYMBOL_GPL(sprd_pmic_detect_charger_type);
static int sprd_pmic_spi_write(void *context, const void *data, size_t count)
{
struct device *dev = context;
struct spi_device *spi = to_spi_device(dev);
return spi_write(spi, data, count);
}
static int sprd_pmic_spi_read(void *context,
const void *reg, size_t reg_size,
void *val, size_t val_size)
{
struct device *dev = context;
struct spi_device *spi = to_spi_device(dev);
u32 rx_buf[2] = { 0 };
int ret;
/* Now we only support one PMIC register to read every time. */
if (reg_size != sizeof(u32) || val_size != sizeof(u32))
return -EINVAL;
/* Copy address to read from into first element of SPI buffer. */
memcpy(rx_buf, reg, sizeof(u32));
ret = spi_read(spi, rx_buf, 1);
if (ret < 0)
return ret;
memcpy(val, rx_buf, val_size);
return 0;
}
static struct regmap_bus sprd_pmic_regmap = {
.write = sprd_pmic_spi_write,
.read = sprd_pmic_spi_read,
.reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
.val_format_endian_default = REGMAP_ENDIAN_NATIVE,
};
static const struct regmap_config sprd_pmic_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.max_register = 0xffff,
};
static int sprd_pmic_probe(struct spi_device *spi)
{
struct sprd_pmic *ddata;
const struct sprd_pmic_data *pdata;
int ret, i;
pdata = of_device_get_match_data(&spi->dev);
if (!pdata) {
dev_err(&spi->dev, "No matching driver data found\n");
return -EINVAL;
}
ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
ddata->regmap = devm_regmap_init(&spi->dev, &sprd_pmic_regmap,
&spi->dev, &sprd_pmic_config);
if (IS_ERR(ddata->regmap)) {
ret = PTR_ERR(ddata->regmap);
dev_err(&spi->dev, "Failed to allocate register map %d\n", ret);
return ret;
}
spi_set_drvdata(spi, ddata);
ddata->dev = &spi->dev;
ddata->irq = spi->irq;
ddata->pdata = pdata;
ddata->irq_chip.name = dev_name(&spi->dev);
ddata->irq_chip.status_base =
pdata->irq_base + SPRD_PMIC_INT_MASK_STATUS;
ddata->irq_chip.mask_base = pdata->irq_base + SPRD_PMIC_INT_EN;
ddata->irq_chip.ack_base = 0;
ddata->irq_chip.num_regs = 1;
ddata->irq_chip.num_irqs = pdata->num_irqs;
ddata->irq_chip.mask_invert = true;
ddata->irqs = devm_kcalloc(&spi->dev,
pdata->num_irqs, sizeof(struct regmap_irq),
GFP_KERNEL);
if (!ddata->irqs)
return -ENOMEM;
ddata->irq_chip.irqs = ddata->irqs;
for (i = 0; i < pdata->num_irqs; i++)
ddata->irqs[i].mask = BIT(i);
ret = devm_regmap_add_irq_chip(&spi->dev, ddata->regmap, ddata->irq,
IRQF_ONESHOT, 0,
&ddata->irq_chip, &ddata->irq_data);
if (ret) {
dev_err(&spi->dev, "Failed to add PMIC irq chip %d\n", ret);
return ret;
}
ret = devm_of_platform_populate(&spi->dev);
if (ret) {
dev_err(&spi->dev, "Failed to populate sub-devices %d\n", ret);
return ret;
}
device_init_wakeup(&spi->dev, true);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int sprd_pmic_suspend(struct device *dev)
{
struct sprd_pmic *ddata = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
enable_irq_wake(ddata->irq);
return 0;
}
static int sprd_pmic_resume(struct device *dev)
{
struct sprd_pmic *ddata = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
disable_irq_wake(ddata->irq);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(sprd_pmic_pm_ops, sprd_pmic_suspend, sprd_pmic_resume);
static const struct of_device_id sprd_pmic_match[] = {
{ .compatible = "sprd,sc2731", .data = &sc2731_data },
{ .compatible = "sprd,sc2730", .data = &sc2730_data },
{},
};
MODULE_DEVICE_TABLE(of, sprd_pmic_match);
static const struct spi_device_id sprd_pmic_spi_ids[] = {
{ .name = "sc2731", .driver_data = (unsigned long)&sc2731_data },
{},
};
MODULE_DEVICE_TABLE(spi, sprd_pmic_spi_ids);
static struct spi_driver sprd_pmic_driver = {
.driver = {
.name = "sc27xx-pmic",
.of_match_table = sprd_pmic_match,
.pm = &sprd_pmic_pm_ops,
},
.probe = sprd_pmic_probe,
.id_table = sprd_pmic_spi_ids,
};
static int __init sprd_pmic_init(void)
{
return spi_register_driver(&sprd_pmic_driver);
}
subsys_initcall(sprd_pmic_init);
static void __exit sprd_pmic_exit(void)
{
spi_unregister_driver(&sprd_pmic_driver);
}
module_exit(sprd_pmic_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Spreadtrum SC27xx PMICs driver");
MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>");