mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-08-30 04:39:38 +00:00
Code Issues Releases Wiki Activity
No description
784446 commits 104 branches 5074 tags 5.5 GiB
C 97.6%
Assembly 1%
Shell 0.5%
Python 0.3%
Makefile 0.3%
Find a file
Douglas Anderson c2bfc22388 drm/bridge: ti-sn65dsi86: Remove the mystery delay 
Let's solve the mystery of commit bf1178c989 ("drm/bridge:
ti-sn65dsi86: Add mystery delay to enable()").  Specifically the
reason we needed that mystery delay is that we weren't paying
attention to HPD.

Looking at the datasheet for the same panel that was tested for the
original commit, I see there's a timing "t3" that times from power on
to the aux channel being operational.  This time is specced as 0 - 200
ms.  The datasheet says that the aux channel is operational at exactly
the same time that HPD is asserted.

Scoping the signals on this board showed that HPD was asserted 84 ms
after power was asserted.  That very closely matches the magic 70 ms
delay that we had.  ...and actually, in my testing the 70 ms wasn't
quite enough of a delay and some percentage of the time the display
didn't come up until I bumped it to 100 ms (presumably 84 ms would
have worked too).

To solve this, we tried to hook up the HPD signal in the bridge.
...but in doing so we found that that the bridge didn't report that
HPD was asserted until ~280 ms after we powered it (!).  This is
explained by looking at the sn65dsi86 datasheet section "8.4.5.1 HPD
(Hot Plug/Unplug Detection)".  Reading there we see that the bridge
isn't even intended to report HPD until 100 ms after it's asserted.
...but that would have left us at 184 ms.  The extra 100 ms
(presumably) comes from this part in the datasheet:

> The HPD state machine operates off an internal ring oscillator. The
> ring oscillator frequency will vary [ ... ]. The min/max range in
> the HPD State Diagram refers to the possible times based off
> variation in the ring oscillator frequency.

Given that the 280 ms we'll end up delaying if we hook up HPD is
_slower_ than the 200 ms we could just hardcode, for now we'll solve
the problem by just hardcoding a 200 ms delay in the panel driver
using the patch in this series ("drm/panel: simple: Support panels
with HPD where HPD isn't connected").

If we later find a panel that needs to use this bridge where we need
HPD then we'll have to come up with some new code to handle it.  Given
the silly debouncing in the bridge chip, though, it seems unlikely.

One last note is that I tried to solve this through another way: In
ti_sn_bridge_enable() I tried to use various combinations of
dp_dpcd_writeb() and dp_dpcd_readb() to detect when the aux channel
was up.  In theory that would let me detect _exactly_ when I could
continue and do link training.  Unfortunately even if I did an aux
transfer w/out waiting I couldn't see any errors.  Possibly I could
keep looping over link training until it came back with success, but
that seemed a little overly hacky to me.

Reviewed-by: Sean Paul <sean@poorly.run>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025222134.174583-4-dianders@chromium.org
2018-10-29 11:53:27 -04:00
arch Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2018-09-29 14:34:06 -07:00
block blk-mq: I/O and timer unplugs are inverted in blktrace 2018-09-27 13:12:44 -06:00
certs export.h: remove VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() 2018-08-22 23:21:44 +09:00
crypto DMAengine updates for v4.19-rc1 2018-08-18 15:55:59 -07:00
Documentation dt-bindings: drm/panel: simple: Add no-hpd property 2018-10-29 11:53:27 -04:00
drivers drm/bridge: ti-sn65dsi86: Remove the mystery delay 2018-10-29 11:53:27 -04:00
firmware
fs filesystem-dax for 4.19-rc6 2018-09-30 06:19:38 -07:00
include drm/radeon: change SPDX identifier to MIT 2018-10-15 16:16:12 -05:00
init Kbuild updates for v4.19 (2nd) 2018-08-25 13:40:38 -07:00
ipc ipc/shm: properly return EIDRM in shm_lock() 2018-09-04 16:45:02 -07:00
kernel Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2018-09-29 11:32:03 -07:00
lib lib/Kconfig.debug: fix three typos in help text 2018-09-04 16:45:02 -07:00
LICENSES LICENSES: Add Linux-OpenIB license text 2018-04-27 16:41:53 -06:00
mm mm: slowly shrink slabs with a relatively small number of objects 2018-09-20 22:01:11 +02:00
net ip_tunnel: be careful when accessing the inner header 2018-09-24 12:27:04 -07:00
samples samples/bpf: all XDP samples should unload xdp/bpf prog on SIGTERM 2018-08-16 21:55:32 +02:00
scripts linux-kselftest-4.19-rc5 2018-09-17 07:24:28 +02:00
security Revert "uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name" 2018-09-25 13:28:58 +02:00
sound ASoC: Fixes for v4.19 2018-09-17 18:59:21 +02:00
tools This is the 4.19-rc6 release 2018-10-04 11:03:34 +10:00
usr initramfs: move gen_initramfs_list.sh from scripts/ to usr/ 2018-08-22 23:21:44 +09:00
virt KVM: Remove obsolete kvm_unmap_hva notifier backend 2018-09-07 15:06:02 +02:00
.clang-format clang-format: Set IndentWrappedFunctionNames false 2018-08-01 18:38:51 +02:00
.cocciconfig
.get_maintainer.ignore
.gitattributes
.gitignore Kbuild updates for v4.17 (2nd) 2018-04-15 17:21:30 -07:00
.mailmap libnvdimm-for-4.19_misc 2018-08-25 18:13:10 -07:00
COPYING
CREDITS 9p: remove Ron Minnich from MAINTAINERS 2018-08-17 16:20:26 -07:00
Kbuild
Kconfig kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt 2018-08-02 08:06:55 +09:00
MAINTAINERS - Fix build failure without CONFIG_DRM_FBDEV_EMULATION (Arnd) 2018-10-11 14:51:57 +10:00
Makefile Linux 4.19-rc6 2018-09-30 07:15:35 -07:00
README

README 

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
See Documentation/00-INDEX for a list of what is contained in each file.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.