mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 02:39:48 +00:00
![Linus Walleij](/assets/img/avatar_default.png)
Instead of passing a global GPIO number for the enable GPIO, pass
a descriptor looked up from the device tree node or the board file
decriptor table for the regulator.
There is a single board file passing the GPIOs for LDO1 and LDO2
through platform data, so augment this to pass descriptors
associated with the i2c device as well.
The special GPIO enable DT property for the enable GPIO is
nonstandard but this was accomodated in
commit 6a537d4846
"gpio: of: Support regulator nonstandard GPIO properties".
Cc: patches@opensource.cirrus.com
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
697 lines
16 KiB
C
697 lines
16 KiB
C
/*
|
|
* wm8994-core.c -- Device access for Wolfson WM8994
|
|
*
|
|
* Copyright 2009 Wolfson Microelectronics PLC.
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/regulator/machine.h>
|
|
|
|
#include <linux/mfd/wm8994/core.h>
|
|
#include <linux/mfd/wm8994/pdata.h>
|
|
#include <linux/mfd/wm8994/registers.h>
|
|
|
|
#include "wm8994.h"
|
|
|
|
static const struct mfd_cell wm8994_regulator_devs[] = {
|
|
{
|
|
.name = "wm8994-ldo",
|
|
.id = 0,
|
|
.pm_runtime_no_callbacks = true,
|
|
},
|
|
{
|
|
.name = "wm8994-ldo",
|
|
.id = 1,
|
|
.pm_runtime_no_callbacks = true,
|
|
},
|
|
};
|
|
|
|
static struct resource wm8994_codec_resources[] = {
|
|
{
|
|
.start = WM8994_IRQ_TEMP_SHUT,
|
|
.end = WM8994_IRQ_TEMP_WARN,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct resource wm8994_gpio_resources[] = {
|
|
{
|
|
.start = WM8994_IRQ_GPIO(1),
|
|
.end = WM8994_IRQ_GPIO(11),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell wm8994_devs[] = {
|
|
{
|
|
.name = "wm8994-codec",
|
|
.num_resources = ARRAY_SIZE(wm8994_codec_resources),
|
|
.resources = wm8994_codec_resources,
|
|
},
|
|
|
|
{
|
|
.name = "wm8994-gpio",
|
|
.num_resources = ARRAY_SIZE(wm8994_gpio_resources),
|
|
.resources = wm8994_gpio_resources,
|
|
.pm_runtime_no_callbacks = true,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Supplies for the main bulk of CODEC; the LDO supplies are ignored
|
|
* and should be handled via the standard regulator API supply
|
|
* management.
|
|
*/
|
|
static const char *wm1811_main_supplies[] = {
|
|
"DBVDD1",
|
|
"DBVDD2",
|
|
"DBVDD3",
|
|
"DCVDD",
|
|
"AVDD1",
|
|
"AVDD2",
|
|
"CPVDD",
|
|
"SPKVDD1",
|
|
"SPKVDD2",
|
|
};
|
|
|
|
static const char *wm8994_main_supplies[] = {
|
|
"DBVDD",
|
|
"DCVDD",
|
|
"AVDD1",
|
|
"AVDD2",
|
|
"CPVDD",
|
|
"SPKVDD1",
|
|
"SPKVDD2",
|
|
};
|
|
|
|
static const char *wm8958_main_supplies[] = {
|
|
"DBVDD1",
|
|
"DBVDD2",
|
|
"DBVDD3",
|
|
"DCVDD",
|
|
"AVDD1",
|
|
"AVDD2",
|
|
"CPVDD",
|
|
"SPKVDD1",
|
|
"SPKVDD2",
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
static int wm8994_suspend(struct device *dev)
|
|
{
|
|
struct wm8994 *wm8994 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
/* Don't actually go through with the suspend if the CODEC is
|
|
* still active for accessory detect. */
|
|
switch (wm8994->type) {
|
|
case WM8958:
|
|
case WM1811:
|
|
ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to read power status: %d\n", ret);
|
|
} else if (ret & WM8958_MICD_ENA) {
|
|
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
|
|
return 0;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Disable LDO pulldowns while the device is suspended if we
|
|
* don't know that something will be driving them. */
|
|
if (!wm8994->ldo_ena_always_driven)
|
|
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
|
|
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
|
|
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD);
|
|
|
|
/* Explicitly put the device into reset in case regulators
|
|
* don't get disabled in order to ensure consistent restart.
|
|
*/
|
|
wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET,
|
|
wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET));
|
|
|
|
regcache_mark_dirty(wm8994->regmap);
|
|
|
|
/* Restore GPIO registers to prevent problems with mismatched
|
|
* pin configurations.
|
|
*/
|
|
ret = regcache_sync_region(wm8994->regmap, WM8994_GPIO_1,
|
|
WM8994_GPIO_11);
|
|
if (ret != 0)
|
|
dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
|
|
|
|
/* In case one of the GPIOs is used as a wake input. */
|
|
ret = regcache_sync_region(wm8994->regmap,
|
|
WM8994_INTERRUPT_STATUS_1_MASK,
|
|
WM8994_INTERRUPT_STATUS_1_MASK);
|
|
if (ret != 0)
|
|
dev_err(dev, "Failed to restore interrupt mask: %d\n", ret);
|
|
|
|
regcache_cache_only(wm8994->regmap, true);
|
|
wm8994->suspended = true;
|
|
|
|
ret = regulator_bulk_disable(wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to disable supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8994_resume(struct device *dev)
|
|
{
|
|
struct wm8994 *wm8994 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
/* We may have lied to the PM core about suspending */
|
|
if (!wm8994->suspended)
|
|
return 0;
|
|
|
|
ret = regulator_bulk_enable(wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to enable supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
regcache_cache_only(wm8994->regmap, false);
|
|
ret = regcache_sync(wm8994->regmap);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to restore register map: %d\n", ret);
|
|
goto err_enable;
|
|
}
|
|
|
|
/* Disable LDO pulldowns while the device is active */
|
|
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
|
|
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
|
|
0);
|
|
|
|
wm8994->suspended = false;
|
|
|
|
return 0;
|
|
|
|
err_enable:
|
|
regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_REGULATOR
|
|
static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
|
|
{
|
|
struct wm8994_ldo_pdata *ldo_pdata;
|
|
|
|
if (!pdata)
|
|
return 0;
|
|
|
|
ldo_pdata = &pdata->ldo[ldo];
|
|
|
|
if (!ldo_pdata->init_data)
|
|
return 0;
|
|
|
|
return ldo_pdata->init_data->num_consumer_supplies != 0;
|
|
}
|
|
#else
|
|
static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct reg_sequence wm8994_revc_patch[] = {
|
|
{ 0x102, 0x3 },
|
|
{ 0x56, 0x3 },
|
|
{ 0x817, 0x0 },
|
|
{ 0x102, 0x0 },
|
|
};
|
|
|
|
static const struct reg_sequence wm8958_reva_patch[] = {
|
|
{ 0x102, 0x3 },
|
|
{ 0xcb, 0x81 },
|
|
{ 0x817, 0x0 },
|
|
{ 0x102, 0x0 },
|
|
};
|
|
|
|
static const struct reg_sequence wm1811_reva_patch[] = {
|
|
{ 0x102, 0x3 },
|
|
{ 0x56, 0xc07 },
|
|
{ 0x5d, 0x7e },
|
|
{ 0x5e, 0x0 },
|
|
{ 0x102, 0x0 },
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
|
|
{
|
|
struct device_node *np = wm8994->dev->of_node;
|
|
struct wm8994_pdata *pdata = &wm8994->pdata;
|
|
int i;
|
|
|
|
if (!np)
|
|
return 0;
|
|
|
|
if (of_property_read_u32_array(np, "wlf,gpio-cfg", pdata->gpio_defaults,
|
|
ARRAY_SIZE(pdata->gpio_defaults)) >= 0) {
|
|
for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
|
|
if (wm8994->pdata.gpio_defaults[i] == 0)
|
|
pdata->gpio_defaults[i]
|
|
= WM8994_CONFIGURE_GPIO;
|
|
}
|
|
}
|
|
|
|
of_property_read_u32_array(np, "wlf,micbias-cfg", pdata->micbias,
|
|
ARRAY_SIZE(pdata->micbias));
|
|
|
|
pdata->lineout1_diff = true;
|
|
pdata->lineout2_diff = true;
|
|
if (of_find_property(np, "wlf,lineout1-se", NULL))
|
|
pdata->lineout1_diff = false;
|
|
if (of_find_property(np, "wlf,lineout2-se", NULL))
|
|
pdata->lineout2_diff = false;
|
|
|
|
if (of_find_property(np, "wlf,lineout1-feedback", NULL))
|
|
pdata->lineout1fb = true;
|
|
if (of_find_property(np, "wlf,lineout2-feedback", NULL))
|
|
pdata->lineout2fb = true;
|
|
|
|
if (of_find_property(np, "wlf,ldoena-always-driven", NULL))
|
|
pdata->lineout2fb = true;
|
|
|
|
pdata->spkmode_pu = of_property_read_bool(np, "wlf,spkmode-pu");
|
|
|
|
pdata->csnaddr_pd = of_property_read_bool(np, "wlf,csnaddr-pd");
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Instantiate the generic non-control parts of the device.
|
|
*/
|
|
static int wm8994_device_init(struct wm8994 *wm8994, int irq)
|
|
{
|
|
struct wm8994_pdata *pdata;
|
|
struct regmap_config *regmap_config;
|
|
const struct reg_sequence *regmap_patch = NULL;
|
|
const char *devname;
|
|
int ret, i, patch_regs = 0;
|
|
int pulls = 0;
|
|
|
|
if (dev_get_platdata(wm8994->dev)) {
|
|
pdata = dev_get_platdata(wm8994->dev);
|
|
wm8994->pdata = *pdata;
|
|
}
|
|
pdata = &wm8994->pdata;
|
|
|
|
ret = wm8994_set_pdata_from_of(wm8994);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
dev_set_drvdata(wm8994->dev, wm8994);
|
|
|
|
/* Add the on-chip regulators first for bootstrapping */
|
|
ret = mfd_add_devices(wm8994->dev, 0,
|
|
wm8994_regulator_devs,
|
|
ARRAY_SIZE(wm8994_regulator_devs),
|
|
NULL, 0, NULL);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
switch (wm8994->type) {
|
|
case WM1811:
|
|
wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies);
|
|
break;
|
|
case WM8994:
|
|
wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies);
|
|
break;
|
|
case WM8958:
|
|
wm8994->num_supplies = ARRAY_SIZE(wm8958_main_supplies);
|
|
break;
|
|
default:
|
|
BUG();
|
|
goto err;
|
|
}
|
|
|
|
wm8994->supplies = devm_kcalloc(wm8994->dev,
|
|
wm8994->num_supplies,
|
|
sizeof(struct regulator_bulk_data),
|
|
GFP_KERNEL);
|
|
if (!wm8994->supplies) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
switch (wm8994->type) {
|
|
case WM1811:
|
|
for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++)
|
|
wm8994->supplies[i].supply = wm1811_main_supplies[i];
|
|
break;
|
|
case WM8994:
|
|
for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
|
|
wm8994->supplies[i].supply = wm8994_main_supplies[i];
|
|
break;
|
|
case WM8958:
|
|
for (i = 0; i < ARRAY_SIZE(wm8958_main_supplies); i++)
|
|
wm8994->supplies[i].supply = wm8958_main_supplies[i];
|
|
break;
|
|
default:
|
|
BUG();
|
|
goto err;
|
|
}
|
|
|
|
/*
|
|
* Can't use devres helper here as some of the supplies are provided by
|
|
* wm8994->dev's children (regulators) and those regulators are
|
|
* unregistered by the devres core before the supplies are freed.
|
|
*/
|
|
ret = regulator_bulk_get(wm8994->dev, wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = regulator_bulk_enable(wm8994->num_supplies, wm8994->supplies);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret);
|
|
goto err_regulator_free;
|
|
}
|
|
|
|
ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET);
|
|
if (ret < 0) {
|
|
dev_err(wm8994->dev, "Failed to read ID register\n");
|
|
goto err_enable;
|
|
}
|
|
switch (ret) {
|
|
case 0x1811:
|
|
devname = "WM1811";
|
|
if (wm8994->type != WM1811)
|
|
dev_warn(wm8994->dev, "Device registered as type %d\n",
|
|
wm8994->type);
|
|
wm8994->type = WM1811;
|
|
break;
|
|
case 0x8994:
|
|
devname = "WM8994";
|
|
if (wm8994->type != WM8994)
|
|
dev_warn(wm8994->dev, "Device registered as type %d\n",
|
|
wm8994->type);
|
|
wm8994->type = WM8994;
|
|
break;
|
|
case 0x8958:
|
|
devname = "WM8958";
|
|
if (wm8994->type != WM8958)
|
|
dev_warn(wm8994->dev, "Device registered as type %d\n",
|
|
wm8994->type);
|
|
wm8994->type = WM8958;
|
|
break;
|
|
default:
|
|
dev_err(wm8994->dev, "Device is not a WM8994, ID is %x\n",
|
|
ret);
|
|
ret = -EINVAL;
|
|
goto err_enable;
|
|
}
|
|
|
|
ret = wm8994_reg_read(wm8994, WM8994_CHIP_REVISION);
|
|
if (ret < 0) {
|
|
dev_err(wm8994->dev, "Failed to read revision register: %d\n",
|
|
ret);
|
|
goto err_enable;
|
|
}
|
|
wm8994->revision = ret & WM8994_CHIP_REV_MASK;
|
|
wm8994->cust_id = (ret & WM8994_CUST_ID_MASK) >> WM8994_CUST_ID_SHIFT;
|
|
|
|
switch (wm8994->type) {
|
|
case WM8994:
|
|
switch (wm8994->revision) {
|
|
case 0:
|
|
case 1:
|
|
dev_warn(wm8994->dev,
|
|
"revision %c not fully supported\n",
|
|
'A' + wm8994->revision);
|
|
break;
|
|
case 2:
|
|
case 3:
|
|
default:
|
|
regmap_patch = wm8994_revc_patch;
|
|
patch_regs = ARRAY_SIZE(wm8994_revc_patch);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case WM8958:
|
|
switch (wm8994->revision) {
|
|
case 0:
|
|
regmap_patch = wm8958_reva_patch;
|
|
patch_regs = ARRAY_SIZE(wm8958_reva_patch);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case WM1811:
|
|
/* Revision C did not change the relevant layer */
|
|
if (wm8994->revision > 1)
|
|
wm8994->revision++;
|
|
|
|
regmap_patch = wm1811_reva_patch;
|
|
patch_regs = ARRAY_SIZE(wm1811_reva_patch);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
dev_info(wm8994->dev, "%s revision %c CUST_ID %02x\n", devname,
|
|
'A' + wm8994->revision, wm8994->cust_id);
|
|
|
|
switch (wm8994->type) {
|
|
case WM1811:
|
|
regmap_config = &wm1811_regmap_config;
|
|
break;
|
|
case WM8994:
|
|
regmap_config = &wm8994_regmap_config;
|
|
break;
|
|
case WM8958:
|
|
regmap_config = &wm8958_regmap_config;
|
|
break;
|
|
default:
|
|
dev_err(wm8994->dev, "Unknown device type %d\n", wm8994->type);
|
|
ret = -EINVAL;
|
|
goto err_enable;
|
|
}
|
|
|
|
ret = regmap_reinit_cache(wm8994->regmap, regmap_config);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to reinit register cache: %d\n",
|
|
ret);
|
|
goto err_enable;
|
|
}
|
|
|
|
/* Explicitly put the device into reset in case regulators
|
|
* don't get disabled in order to ensure we know the device
|
|
* state.
|
|
*/
|
|
ret = wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET,
|
|
wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET));
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to reset device: %d\n", ret);
|
|
goto err_enable;
|
|
}
|
|
|
|
if (regmap_patch) {
|
|
ret = regmap_register_patch(wm8994->regmap, regmap_patch,
|
|
patch_regs);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to register patch: %d\n",
|
|
ret);
|
|
goto err_enable;
|
|
}
|
|
}
|
|
|
|
wm8994->irq_base = pdata->irq_base;
|
|
wm8994->gpio_base = pdata->gpio_base;
|
|
|
|
/* GPIO configuration is only applied if it's non-zero */
|
|
for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
|
|
if (pdata->gpio_defaults[i]) {
|
|
wm8994_set_bits(wm8994, WM8994_GPIO_1 + i,
|
|
0xffff, pdata->gpio_defaults[i]);
|
|
}
|
|
}
|
|
|
|
wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
|
|
|
|
if (pdata->spkmode_pu)
|
|
pulls |= WM8994_SPKMODE_PU;
|
|
if (pdata->csnaddr_pd)
|
|
pulls |= WM8994_CSNADDR_PD;
|
|
|
|
/* Disable unneeded pulls */
|
|
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
|
|
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD |
|
|
WM8994_SPKMODE_PU | WM8994_CSNADDR_PD,
|
|
pulls);
|
|
|
|
/* In some system designs where the regulators are not in use,
|
|
* we can achieve a small reduction in leakage currents by
|
|
* floating LDO outputs. This bit makes no difference if the
|
|
* LDOs are enabled, it only affects cases where the LDOs were
|
|
* in operation and are then disabled.
|
|
*/
|
|
for (i = 0; i < WM8994_NUM_LDO_REGS; i++) {
|
|
if (wm8994_ldo_in_use(pdata, i))
|
|
wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
|
|
WM8994_LDO1_DISCH, WM8994_LDO1_DISCH);
|
|
else
|
|
wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
|
|
WM8994_LDO1_DISCH, 0);
|
|
}
|
|
|
|
wm8994_irq_init(wm8994);
|
|
|
|
ret = mfd_add_devices(wm8994->dev, -1,
|
|
wm8994_devs, ARRAY_SIZE(wm8994_devs),
|
|
NULL, 0, NULL);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
|
|
goto err_irq;
|
|
}
|
|
|
|
pm_runtime_enable(wm8994->dev);
|
|
pm_runtime_idle(wm8994->dev);
|
|
|
|
return 0;
|
|
|
|
err_irq:
|
|
wm8994_irq_exit(wm8994);
|
|
err_enable:
|
|
regulator_bulk_disable(wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
err_regulator_free:
|
|
regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
|
|
err:
|
|
mfd_remove_devices(wm8994->dev);
|
|
return ret;
|
|
}
|
|
|
|
static void wm8994_device_exit(struct wm8994 *wm8994)
|
|
{
|
|
pm_runtime_disable(wm8994->dev);
|
|
wm8994_irq_exit(wm8994);
|
|
regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies);
|
|
regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
|
|
mfd_remove_devices(wm8994->dev);
|
|
}
|
|
|
|
static const struct of_device_id wm8994_of_match[] = {
|
|
{ .compatible = "wlf,wm1811", .data = (void *)WM1811 },
|
|
{ .compatible = "wlf,wm8994", .data = (void *)WM8994 },
|
|
{ .compatible = "wlf,wm8958", .data = (void *)WM8958 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, wm8994_of_match);
|
|
|
|
static int wm8994_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
const struct of_device_id *of_id;
|
|
struct wm8994 *wm8994;
|
|
int ret;
|
|
|
|
wm8994 = devm_kzalloc(&i2c->dev, sizeof(struct wm8994), GFP_KERNEL);
|
|
if (wm8994 == NULL)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(i2c, wm8994);
|
|
wm8994->dev = &i2c->dev;
|
|
wm8994->irq = i2c->irq;
|
|
|
|
if (i2c->dev.of_node) {
|
|
of_id = of_match_device(wm8994_of_match, &i2c->dev);
|
|
if (of_id)
|
|
wm8994->type = (enum wm8994_type)of_id->data;
|
|
} else {
|
|
wm8994->type = id->driver_data;
|
|
}
|
|
|
|
wm8994->regmap = devm_regmap_init_i2c(i2c, &wm8994_base_regmap_config);
|
|
if (IS_ERR(wm8994->regmap)) {
|
|
ret = PTR_ERR(wm8994->regmap);
|
|
dev_err(wm8994->dev, "Failed to allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
return wm8994_device_init(wm8994, i2c->irq);
|
|
}
|
|
|
|
static int wm8994_i2c_remove(struct i2c_client *i2c)
|
|
{
|
|
struct wm8994 *wm8994 = i2c_get_clientdata(i2c);
|
|
|
|
wm8994_device_exit(wm8994);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id wm8994_i2c_id[] = {
|
|
{ "wm1811", WM1811 },
|
|
{ "wm1811a", WM1811 },
|
|
{ "wm8994", WM8994 },
|
|
{ "wm8958", WM8958 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id);
|
|
|
|
static const struct dev_pm_ops wm8994_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(wm8994_suspend, wm8994_resume, NULL)
|
|
};
|
|
|
|
static struct i2c_driver wm8994_i2c_driver = {
|
|
.driver = {
|
|
.name = "wm8994",
|
|
.pm = &wm8994_pm_ops,
|
|
.of_match_table = of_match_ptr(wm8994_of_match),
|
|
},
|
|
.probe = wm8994_i2c_probe,
|
|
.remove = wm8994_i2c_remove,
|
|
.id_table = wm8994_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(wm8994_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|