mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 02:39:48 +00:00
![Linus Torvalds](/assets/img/avatar_default.png)
Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms. -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TUboPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx3T4YP/R5pjF2C1gt8FrCaG4IfhIY1VHWelfPcB5qB RC7Pn4MCRCEY+10YPXA70oS6KBaC+gtZ4bPeInzfLXh1ynFJJb+XtAIxoRhnkEw+ /R979wNcIls9JqkvnHWFx29Y008W2ZNcXVNKH7O2Gxy+eKzDcTMsoH/zj8xWrV5b +eBllTzGU4RArYRJdcwOBQwMO6L2pzADHZ7hGMAY//8fo+qrxg8b9EINsH1UHCa8 gQdWdVlmv6GeLB6RYLRBCWxpW4jOLDqEAvyDV84QQmYHvzD9tqJExNR0hfGTs4TU TZWK7LWSNqF0ujQUbFh9Ikcx6DypU1gvE7LKhCDrf4D7HLRX5v4BjGH+xtVtjsyD xzh4WEoa3qCNu1mxQjKG8Y6U7bB9cRI2TPVxbbmI4ZuF0njvybecwwOZUBQl4aD4 5x+Df3pO/E5ECLOBeTnLgvw20fcjHv4HP8l63B6ADb31FUiZrJXItvayY5qXWe+P HSgUykmVA4nd4PnLsSj9seyWqOTIqUZ3U3TsmfxIQh2Otie01okwuHb1J7ErO/u0 W148SgSwVbnkPxjbBHKGgC2r+Q/AjSDGRBYL0ThIVFUztxTBBwhj3FIvMnyyxTIj yFBY14KQ8FcNUs8DrbPCaAx/RDCB02IHdvvIlyTmU3RBq7UhJVIglpLzzo2ed9F2 5u/aVH3y =tfPb -----END PGP SIGNATURE----- Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits) drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc soc: amlogic: pm-domains: use always-on flag reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() ...
1592 lines
47 KiB
C
1592 lines
47 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2019 Samsung Electronics Co., Ltd.
|
|
* Author: Lukasz Luba <l.luba@partner.samsung.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/devfreq.h>
|
|
#include <linux/devfreq-event.h>
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pm_opp.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include "../jedec_ddr.h"
|
|
#include "../of_memory.h"
|
|
|
|
static int irqmode;
|
|
module_param(irqmode, int, 0644);
|
|
MODULE_PARM_DESC(irqmode, "Enable IRQ mode (0=off [default], 1=on)");
|
|
|
|
#define EXYNOS5_DREXI_TIMINGAREF (0x0030)
|
|
#define EXYNOS5_DREXI_TIMINGROW0 (0x0034)
|
|
#define EXYNOS5_DREXI_TIMINGDATA0 (0x0038)
|
|
#define EXYNOS5_DREXI_TIMINGPOWER0 (0x003C)
|
|
#define EXYNOS5_DREXI_TIMINGROW1 (0x00E4)
|
|
#define EXYNOS5_DREXI_TIMINGDATA1 (0x00E8)
|
|
#define EXYNOS5_DREXI_TIMINGPOWER1 (0x00EC)
|
|
#define CDREX_PAUSE (0x2091c)
|
|
#define CDREX_LPDDR3PHY_CON3 (0x20a20)
|
|
#define CDREX_LPDDR3PHY_CLKM_SRC (0x20700)
|
|
#define EXYNOS5_TIMING_SET_SWI BIT(28)
|
|
#define USE_MX_MSPLL_TIMINGS (1)
|
|
#define USE_BPLL_TIMINGS (0)
|
|
#define EXYNOS5_AREF_NORMAL (0x2e)
|
|
|
|
#define DREX_PPCCLKCON (0x0130)
|
|
#define DREX_PEREV2CONFIG (0x013c)
|
|
#define DREX_PMNC_PPC (0xE000)
|
|
#define DREX_CNTENS_PPC (0xE010)
|
|
#define DREX_CNTENC_PPC (0xE020)
|
|
#define DREX_INTENS_PPC (0xE030)
|
|
#define DREX_INTENC_PPC (0xE040)
|
|
#define DREX_FLAG_PPC (0xE050)
|
|
#define DREX_PMCNT2_PPC (0xE130)
|
|
|
|
/*
|
|
* A value for register DREX_PMNC_PPC which should be written to reset
|
|
* the cycle counter CCNT (a reference wall clock). It sets zero to the
|
|
* CCNT counter.
|
|
*/
|
|
#define CC_RESET BIT(2)
|
|
|
|
/*
|
|
* A value for register DREX_PMNC_PPC which does the reset of all performance
|
|
* counters to zero.
|
|
*/
|
|
#define PPC_COUNTER_RESET BIT(1)
|
|
|
|
/*
|
|
* Enables all configured counters (including cycle counter). The value should
|
|
* be written to the register DREX_PMNC_PPC.
|
|
*/
|
|
#define PPC_ENABLE BIT(0)
|
|
|
|
/* A value for register DREX_PPCCLKCON which enables performance events clock.
|
|
* Must be written before first access to the performance counters register
|
|
* set, otherwise it could crash.
|
|
*/
|
|
#define PEREV_CLK_EN BIT(0)
|
|
|
|
/*
|
|
* Values which are used to enable counters, interrupts or configure flags of
|
|
* the performance counters. They configure counter 2 and cycle counter.
|
|
*/
|
|
#define PERF_CNT2 BIT(2)
|
|
#define PERF_CCNT BIT(31)
|
|
|
|
/*
|
|
* Performance event types which are used for setting the preferred event
|
|
* to track in the counters.
|
|
* There is a set of different types, the values are from range 0 to 0x6f.
|
|
* These settings should be written to the configuration register which manages
|
|
* the type of the event (register DREX_PEREV2CONFIG).
|
|
*/
|
|
#define READ_TRANSFER_CH0 (0x6d)
|
|
#define READ_TRANSFER_CH1 (0x6f)
|
|
|
|
#define PERF_COUNTER_START_VALUE 0xff000000
|
|
#define PERF_EVENT_UP_DOWN_THRESHOLD 900000000ULL
|
|
|
|
/**
|
|
* struct dmc_opp_table - Operating level desciption
|
|
* @freq_hz: target frequency in Hz
|
|
* @volt_uv: target voltage in uV
|
|
*
|
|
* Covers frequency and voltage settings of the DMC operating mode.
|
|
*/
|
|
struct dmc_opp_table {
|
|
u32 freq_hz;
|
|
u32 volt_uv;
|
|
};
|
|
|
|
/**
|
|
* struct exynos5_dmc - main structure describing DMC device
|
|
* @dev: DMC device
|
|
* @df: devfreq device structure returned by devfreq framework
|
|
* @gov_data: configuration of devfreq governor
|
|
* @base_drexi0: DREX0 registers mapping
|
|
* @base_drexi1: DREX1 registers mapping
|
|
* @clk_regmap: regmap for clock controller registers
|
|
* @lock: protects curr_rate and frequency/voltage setting section
|
|
* @curr_rate: current frequency
|
|
* @curr_volt: current voltage
|
|
* @opp: OPP table
|
|
* @opp_count: number of 'opp' elements
|
|
* @timings_arr_size: number of 'timings' elements
|
|
* @timing_row: values for timing row register, for each OPP
|
|
* @timing_data: values for timing data register, for each OPP
|
|
* @timing_power: balues for timing power register, for each OPP
|
|
* @timings: DDR memory timings, from device tree
|
|
* @min_tck: DDR memory minimum timing values, from device tree
|
|
* @bypass_timing_row: value for timing row register for bypass timings
|
|
* @bypass_timing_data: value for timing data register for bypass timings
|
|
* @bypass_timing_power: value for timing power register for bypass
|
|
* timings
|
|
* @vdd_mif: Memory interface regulator
|
|
* @fout_spll: clock: SPLL
|
|
* @fout_bpll: clock: BPLL
|
|
* @mout_spll: clock: mux SPLL
|
|
* @mout_bpll: clock: mux BPLL
|
|
* @mout_mclk_cdrex: clock: mux mclk_cdrex
|
|
* @mout_mx_mspll_ccore: clock: mux mx_mspll_ccore
|
|
* @counter: devfreq events
|
|
* @num_counters: number of 'counter' elements
|
|
* @last_overflow_ts: time (in ns) of last overflow of each DREX
|
|
* @load: utilization in percents
|
|
* @total: total time between devfreq events
|
|
* @in_irq_mode: whether running in interrupt mode (true)
|
|
* or polling (false)
|
|
*
|
|
* The main structure for the Dynamic Memory Controller which covers clocks,
|
|
* memory regions, HW information, parameters and current operating mode.
|
|
*/
|
|
struct exynos5_dmc {
|
|
struct device *dev;
|
|
struct devfreq *df;
|
|
struct devfreq_simple_ondemand_data gov_data;
|
|
void __iomem *base_drexi0;
|
|
void __iomem *base_drexi1;
|
|
struct regmap *clk_regmap;
|
|
/* Protects curr_rate and frequency/voltage setting section */
|
|
struct mutex lock;
|
|
unsigned long curr_rate;
|
|
unsigned long curr_volt;
|
|
struct dmc_opp_table *opp;
|
|
int opp_count;
|
|
u32 timings_arr_size;
|
|
u32 *timing_row;
|
|
u32 *timing_data;
|
|
u32 *timing_power;
|
|
const struct lpddr3_timings *timings;
|
|
const struct lpddr3_min_tck *min_tck;
|
|
u32 bypass_timing_row;
|
|
u32 bypass_timing_data;
|
|
u32 bypass_timing_power;
|
|
struct regulator *vdd_mif;
|
|
struct clk *fout_spll;
|
|
struct clk *fout_bpll;
|
|
struct clk *mout_spll;
|
|
struct clk *mout_bpll;
|
|
struct clk *mout_mclk_cdrex;
|
|
struct clk *mout_mx_mspll_ccore;
|
|
struct devfreq_event_dev **counter;
|
|
int num_counters;
|
|
u64 last_overflow_ts[2];
|
|
unsigned long load;
|
|
unsigned long total;
|
|
bool in_irq_mode;
|
|
};
|
|
|
|
#define TIMING_FIELD(t_name, t_bit_beg, t_bit_end) \
|
|
{ .name = t_name, .bit_beg = t_bit_beg, .bit_end = t_bit_end }
|
|
|
|
#define TIMING_VAL2REG(timing, t_val) \
|
|
({ \
|
|
u32 __val; \
|
|
__val = (t_val) << (timing)->bit_beg; \
|
|
__val; \
|
|
})
|
|
|
|
struct timing_reg {
|
|
char *name;
|
|
int bit_beg;
|
|
int bit_end;
|
|
unsigned int val;
|
|
};
|
|
|
|
static const struct timing_reg timing_row_reg_fields[] = {
|
|
TIMING_FIELD("tRFC", 24, 31),
|
|
TIMING_FIELD("tRRD", 20, 23),
|
|
TIMING_FIELD("tRP", 16, 19),
|
|
TIMING_FIELD("tRCD", 12, 15),
|
|
TIMING_FIELD("tRC", 6, 11),
|
|
TIMING_FIELD("tRAS", 0, 5),
|
|
};
|
|
|
|
static const struct timing_reg timing_data_reg_fields[] = {
|
|
TIMING_FIELD("tWTR", 28, 31),
|
|
TIMING_FIELD("tWR", 24, 27),
|
|
TIMING_FIELD("tRTP", 20, 23),
|
|
TIMING_FIELD("tW2W-C2C", 14, 14),
|
|
TIMING_FIELD("tR2R-C2C", 12, 12),
|
|
TIMING_FIELD("WL", 8, 11),
|
|
TIMING_FIELD("tDQSCK", 4, 7),
|
|
TIMING_FIELD("RL", 0, 3),
|
|
};
|
|
|
|
static const struct timing_reg timing_power_reg_fields[] = {
|
|
TIMING_FIELD("tFAW", 26, 31),
|
|
TIMING_FIELD("tXSR", 16, 25),
|
|
TIMING_FIELD("tXP", 8, 15),
|
|
TIMING_FIELD("tCKE", 4, 7),
|
|
TIMING_FIELD("tMRD", 0, 3),
|
|
};
|
|
|
|
#define TIMING_COUNT (ARRAY_SIZE(timing_row_reg_fields) + \
|
|
ARRAY_SIZE(timing_data_reg_fields) + \
|
|
ARRAY_SIZE(timing_power_reg_fields))
|
|
|
|
static int exynos5_counters_set_event(struct exynos5_dmc *dmc)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < dmc->num_counters; i++) {
|
|
if (!dmc->counter[i])
|
|
continue;
|
|
ret = devfreq_event_set_event(dmc->counter[i]);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int exynos5_counters_enable_edev(struct exynos5_dmc *dmc)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < dmc->num_counters; i++) {
|
|
if (!dmc->counter[i])
|
|
continue;
|
|
ret = devfreq_event_enable_edev(dmc->counter[i]);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int exynos5_counters_disable_edev(struct exynos5_dmc *dmc)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < dmc->num_counters; i++) {
|
|
if (!dmc->counter[i])
|
|
continue;
|
|
ret = devfreq_event_disable_edev(dmc->counter[i]);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* find_target_freq_id() - Finds requested frequency in local DMC configuration
|
|
* @dmc: device for which the information is checked
|
|
* @target_rate: requested frequency in KHz
|
|
*
|
|
* Seeks in the local DMC driver structure for the requested frequency value
|
|
* and returns index or error value.
|
|
*/
|
|
static int find_target_freq_idx(struct exynos5_dmc *dmc,
|
|
unsigned long target_rate)
|
|
{
|
|
int i;
|
|
|
|
for (i = dmc->opp_count - 1; i >= 0; i--)
|
|
if (dmc->opp[i].freq_hz <= target_rate)
|
|
return i;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* exynos5_switch_timing_regs() - Changes bank register set for DRAM timings
|
|
* @dmc: device for which the new settings is going to be applied
|
|
* @set: boolean variable passing set value
|
|
*
|
|
* Changes the register set, which holds timing parameters.
|
|
* There is two register sets: 0 and 1. The register set 0
|
|
* is used in normal operation when the clock is provided from main PLL.
|
|
* The bank register set 1 is used when the main PLL frequency is going to be
|
|
* changed and the clock is taken from alternative, stable source.
|
|
* This function switches between these banks according to the
|
|
* currently used clock source.
|
|
*/
|
|
static int exynos5_switch_timing_regs(struct exynos5_dmc *dmc, bool set)
|
|
{
|
|
unsigned int reg;
|
|
int ret;
|
|
|
|
ret = regmap_read(dmc->clk_regmap, CDREX_LPDDR3PHY_CON3, ®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (set)
|
|
reg |= EXYNOS5_TIMING_SET_SWI;
|
|
else
|
|
reg &= ~EXYNOS5_TIMING_SET_SWI;
|
|
|
|
regmap_write(dmc->clk_regmap, CDREX_LPDDR3PHY_CON3, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* exynos5_init_freq_table() - Initialized PM OPP framework
|
|
* @dmc: DMC device for which the frequencies are used for OPP init
|
|
* @profile: devfreq device's profile
|
|
*
|
|
* Populate the devfreq device's OPP table based on current frequency, voltage.
|
|
*/
|
|
static int exynos5_init_freq_table(struct exynos5_dmc *dmc,
|
|
struct devfreq_dev_profile *profile)
|
|
{
|
|
int i, ret;
|
|
int idx;
|
|
unsigned long freq;
|
|
|
|
ret = dev_pm_opp_of_add_table(dmc->dev);
|
|
if (ret < 0) {
|
|
dev_err(dmc->dev, "Failed to get OPP table\n");
|
|
return ret;
|
|
}
|
|
|
|
dmc->opp_count = dev_pm_opp_get_opp_count(dmc->dev);
|
|
|
|
dmc->opp = devm_kmalloc_array(dmc->dev, dmc->opp_count,
|
|
sizeof(struct dmc_opp_table), GFP_KERNEL);
|
|
if (!dmc->opp)
|
|
goto err_opp;
|
|
|
|
idx = dmc->opp_count - 1;
|
|
for (i = 0, freq = ULONG_MAX; i < dmc->opp_count; i++, freq--) {
|
|
struct dev_pm_opp *opp;
|
|
|
|
opp = dev_pm_opp_find_freq_floor(dmc->dev, &freq);
|
|
if (IS_ERR(opp))
|
|
goto err_opp;
|
|
|
|
dmc->opp[idx - i].freq_hz = freq;
|
|
dmc->opp[idx - i].volt_uv = dev_pm_opp_get_voltage(opp);
|
|
|
|
dev_pm_opp_put(opp);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_opp:
|
|
dev_pm_opp_of_remove_table(dmc->dev);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* exynos5_set_bypass_dram_timings() - Low-level changes of the DRAM timings
|
|
* @dmc: device for which the new settings is going to be applied
|
|
*
|
|
* Low-level function for changing timings for DRAM memory clocking from
|
|
* 'bypass' clock source (fixed frequency @400MHz).
|
|
* It uses timing bank registers set 1.
|
|
*/
|
|
static void exynos5_set_bypass_dram_timings(struct exynos5_dmc *dmc)
|
|
{
|
|
writel(EXYNOS5_AREF_NORMAL,
|
|
dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGAREF);
|
|
|
|
writel(dmc->bypass_timing_row,
|
|
dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGROW1);
|
|
writel(dmc->bypass_timing_row,
|
|
dmc->base_drexi1 + EXYNOS5_DREXI_TIMINGROW1);
|
|
writel(dmc->bypass_timing_data,
|
|
dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGDATA1);
|
|
writel(dmc->bypass_timing_data,
|
|
dmc->base_drexi1 + EXYNOS5_DREXI_TIMINGDATA1);
|
|
writel(dmc->bypass_timing_power,
|
|
dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGPOWER1);
|
|
writel(dmc->bypass_timing_power,
|
|
dmc->base_drexi1 + EXYNOS5_DREXI_TIMINGPOWER1);
|
|
}
|
|
|
|
/**
|
|
* exynos5_dram_change_timings() - Low-level changes of the DRAM final timings
|
|
* @dmc: device for which the new settings is going to be applied
|
|
* @target_rate: target frequency of the DMC
|
|
*
|
|
* Low-level function for changing timings for DRAM memory operating from main
|
|
* clock source (BPLL), which can have different frequencies. Thus, each
|
|
* frequency must have corresponding timings register values in order to keep
|
|
* the needed delays.
|
|
* It uses timing bank registers set 0.
|
|
*/
|
|
static int exynos5_dram_change_timings(struct exynos5_dmc *dmc,
|
|
unsigned long target_rate)
|
|
{
|
|
int idx;
|
|
|
|
for (idx = dmc->opp_count - 1; idx >= 0; idx--)
|
|
if (dmc->opp[idx].freq_hz <= target_rate)
|
|
break;
|
|
|
|
if (idx < 0)
|
|
return -EINVAL;
|
|
|
|
writel(EXYNOS5_AREF_NORMAL,
|
|
dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGAREF);
|
|
|
|
writel(dmc->timing_row[idx],
|
|
dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGROW0);
|
|
writel(dmc->timing_row[idx],
|
|
dmc->base_drexi1 + EXYNOS5_DREXI_TIMINGROW0);
|
|
writel(dmc->timing_data[idx],
|
|
dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGDATA0);
|
|
writel(dmc->timing_data[idx],
|
|
dmc->base_drexi1 + EXYNOS5_DREXI_TIMINGDATA0);
|
|
writel(dmc->timing_power[idx],
|
|
dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGPOWER0);
|
|
writel(dmc->timing_power[idx],
|
|
dmc->base_drexi1 + EXYNOS5_DREXI_TIMINGPOWER0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_align_target_voltage() - Sets the final voltage for the DMC
|
|
* @dmc: device for which it is going to be set
|
|
* @target_volt: new voltage which is chosen to be final
|
|
*
|
|
* Function tries to align voltage to the safe level for 'normal' mode.
|
|
* It checks the need of higher voltage and changes the value. The target
|
|
* voltage might be lower that currently set and still the system will be
|
|
* stable.
|
|
*/
|
|
static int exynos5_dmc_align_target_voltage(struct exynos5_dmc *dmc,
|
|
unsigned long target_volt)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (dmc->curr_volt <= target_volt)
|
|
return 0;
|
|
|
|
ret = regulator_set_voltage(dmc->vdd_mif, target_volt,
|
|
target_volt);
|
|
if (!ret)
|
|
dmc->curr_volt = target_volt;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_align_bypass_voltage() - Sets the voltage for the DMC
|
|
* @dmc: device for which it is going to be set
|
|
* @target_volt: new voltage which is chosen to be final
|
|
*
|
|
* Function tries to align voltage to the safe level for the 'bypass' mode.
|
|
* It checks the need of higher voltage and changes the value.
|
|
* The target voltage must not be less than currently needed, because
|
|
* for current frequency the device might become unstable.
|
|
*/
|
|
static int exynos5_dmc_align_bypass_voltage(struct exynos5_dmc *dmc,
|
|
unsigned long target_volt)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (dmc->curr_volt >= target_volt)
|
|
return 0;
|
|
|
|
ret = regulator_set_voltage(dmc->vdd_mif, target_volt,
|
|
target_volt);
|
|
if (!ret)
|
|
dmc->curr_volt = target_volt;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_align_bypass_dram_timings() - Chooses and sets DRAM timings
|
|
* @dmc: device for which it is going to be set
|
|
* @target_rate: new frequency which is chosen to be final
|
|
*
|
|
* Function changes the DRAM timings for the temporary 'bypass' mode.
|
|
*/
|
|
static int exynos5_dmc_align_bypass_dram_timings(struct exynos5_dmc *dmc,
|
|
unsigned long target_rate)
|
|
{
|
|
int idx = find_target_freq_idx(dmc, target_rate);
|
|
|
|
if (idx < 0)
|
|
return -EINVAL;
|
|
|
|
exynos5_set_bypass_dram_timings(dmc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_switch_to_bypass_configuration() - Switching to temporary clock
|
|
* @dmc: DMC device for which the switching is going to happen
|
|
* @target_rate: new frequency which is going to be set as a final
|
|
* @target_volt: new voltage which is going to be set as a final
|
|
*
|
|
* Function configures DMC and clocks for operating in temporary 'bypass' mode.
|
|
* This mode is used only temporary but if required, changes voltage and timings
|
|
* for DRAM chips. It switches the main clock to stable clock source for the
|
|
* period of the main PLL reconfiguration.
|
|
*/
|
|
static int
|
|
exynos5_dmc_switch_to_bypass_configuration(struct exynos5_dmc *dmc,
|
|
unsigned long target_rate,
|
|
unsigned long target_volt)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* Having higher voltage for a particular frequency does not harm
|
|
* the chip. Use it for the temporary frequency change when one
|
|
* voltage manipulation might be avoided.
|
|
*/
|
|
ret = exynos5_dmc_align_bypass_voltage(dmc, target_volt);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Longer delays for DRAM does not cause crash, the opposite does.
|
|
*/
|
|
ret = exynos5_dmc_align_bypass_dram_timings(dmc, target_rate);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Delays are long enough, so use them for the new coming clock.
|
|
*/
|
|
ret = exynos5_switch_timing_regs(dmc, USE_MX_MSPLL_TIMINGS);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_change_freq_and_volt() - Changes voltage and frequency of the DMC
|
|
* using safe procedure
|
|
* @dmc: device for which the frequency is going to be changed
|
|
* @target_rate: requested new frequency
|
|
* @target_volt: requested voltage which corresponds to the new frequency
|
|
*
|
|
* The DMC frequency change procedure requires a few steps.
|
|
* The main requirement is to change the clock source in the clk mux
|
|
* for the time of main clock PLL locking. The assumption is that the
|
|
* alternative clock source set as parent is stable.
|
|
* The second parent's clock frequency is fixed to 400MHz, it is named 'bypass'
|
|
* clock. This requires alignment in DRAM timing parameters for the new
|
|
* T-period. There is two bank sets for keeping DRAM
|
|
* timings: set 0 and set 1. The set 0 is used when main clock source is
|
|
* chosen. The 2nd set of regs is used for 'bypass' clock. Switching between
|
|
* the two bank sets is part of the process.
|
|
* The voltage must also be aligned to the minimum required level. There is
|
|
* this intermediate step with switching to 'bypass' parent clock source.
|
|
* if the old voltage is lower, it requires an increase of the voltage level.
|
|
* The complexity of the voltage manipulation is hidden in low level function.
|
|
* In this function there is last alignment of the voltage level at the end.
|
|
*/
|
|
static int
|
|
exynos5_dmc_change_freq_and_volt(struct exynos5_dmc *dmc,
|
|
unsigned long target_rate,
|
|
unsigned long target_volt)
|
|
{
|
|
int ret;
|
|
|
|
ret = exynos5_dmc_switch_to_bypass_configuration(dmc, target_rate,
|
|
target_volt);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Voltage is set at least to a level needed for this frequency,
|
|
* so switching clock source is safe now.
|
|
*/
|
|
clk_prepare_enable(dmc->fout_spll);
|
|
clk_prepare_enable(dmc->mout_spll);
|
|
clk_prepare_enable(dmc->mout_mx_mspll_ccore);
|
|
|
|
ret = clk_set_parent(dmc->mout_mclk_cdrex, dmc->mout_mx_mspll_ccore);
|
|
if (ret)
|
|
goto disable_clocks;
|
|
|
|
/*
|
|
* We are safe to increase the timings for current bypass frequency.
|
|
* Thanks to this the settings will be ready for the upcoming clock
|
|
* source change.
|
|
*/
|
|
exynos5_dram_change_timings(dmc, target_rate);
|
|
|
|
clk_set_rate(dmc->fout_bpll, target_rate);
|
|
|
|
ret = exynos5_switch_timing_regs(dmc, USE_BPLL_TIMINGS);
|
|
if (ret)
|
|
goto disable_clocks;
|
|
|
|
ret = clk_set_parent(dmc->mout_mclk_cdrex, dmc->mout_bpll);
|
|
if (ret)
|
|
goto disable_clocks;
|
|
|
|
/*
|
|
* Make sure if the voltage is not from 'bypass' settings and align to
|
|
* the right level for power efficiency.
|
|
*/
|
|
ret = exynos5_dmc_align_target_voltage(dmc, target_volt);
|
|
|
|
disable_clocks:
|
|
clk_disable_unprepare(dmc->mout_mx_mspll_ccore);
|
|
clk_disable_unprepare(dmc->mout_spll);
|
|
clk_disable_unprepare(dmc->fout_spll);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_get_volt_freq() - Gets the frequency and voltage from the OPP
|
|
* table.
|
|
* @dmc: device for which the frequency is going to be changed
|
|
* @freq: requested frequency in KHz
|
|
* @target_rate: returned frequency which is the same or lower than
|
|
* requested
|
|
* @target_volt: returned voltage which corresponds to the returned
|
|
* frequency
|
|
* @flags: devfreq flags provided for this frequency change request
|
|
*
|
|
* Function gets requested frequency and checks OPP framework for needed
|
|
* frequency and voltage. It populates the values 'target_rate' and
|
|
* 'target_volt' or returns error value when OPP framework fails.
|
|
*/
|
|
static int exynos5_dmc_get_volt_freq(struct exynos5_dmc *dmc,
|
|
unsigned long *freq,
|
|
unsigned long *target_rate,
|
|
unsigned long *target_volt, u32 flags)
|
|
{
|
|
struct dev_pm_opp *opp;
|
|
|
|
opp = devfreq_recommended_opp(dmc->dev, freq, flags);
|
|
if (IS_ERR(opp))
|
|
return PTR_ERR(opp);
|
|
|
|
*target_rate = dev_pm_opp_get_freq(opp);
|
|
*target_volt = dev_pm_opp_get_voltage(opp);
|
|
dev_pm_opp_put(opp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_target() - Function responsible for changing frequency of DMC
|
|
* @dev: device for which the frequency is going to be changed
|
|
* @freq: requested frequency in KHz
|
|
* @flags: flags provided for this frequency change request
|
|
*
|
|
* An entry function provided to the devfreq framework which provides frequency
|
|
* change of the DMC. The function gets the possible rate from OPP table based
|
|
* on requested frequency. It calls the next function responsible for the
|
|
* frequency and voltage change. In case of failure, does not set 'curr_rate'
|
|
* and returns error value to the framework.
|
|
*/
|
|
static int exynos5_dmc_target(struct device *dev, unsigned long *freq,
|
|
u32 flags)
|
|
{
|
|
struct exynos5_dmc *dmc = dev_get_drvdata(dev);
|
|
unsigned long target_rate = 0;
|
|
unsigned long target_volt = 0;
|
|
int ret;
|
|
|
|
ret = exynos5_dmc_get_volt_freq(dmc, freq, &target_rate, &target_volt,
|
|
flags);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (target_rate == dmc->curr_rate)
|
|
return 0;
|
|
|
|
mutex_lock(&dmc->lock);
|
|
|
|
ret = exynos5_dmc_change_freq_and_volt(dmc, target_rate, target_volt);
|
|
|
|
if (ret) {
|
|
mutex_unlock(&dmc->lock);
|
|
return ret;
|
|
}
|
|
|
|
dmc->curr_rate = target_rate;
|
|
|
|
mutex_unlock(&dmc->lock);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* exynos5_counters_get() - Gets the performance counters values.
|
|
* @dmc: device for which the counters are going to be checked
|
|
* @load_count: variable which is populated with counter value
|
|
* @total_count: variable which is used as 'wall clock' reference
|
|
*
|
|
* Function which provides performance counters values. It sums up counters for
|
|
* two DMC channels. The 'total_count' is used as a reference and max value.
|
|
* The ratio 'load_count/total_count' shows the busy percentage [0%, 100%].
|
|
*/
|
|
static int exynos5_counters_get(struct exynos5_dmc *dmc,
|
|
unsigned long *load_count,
|
|
unsigned long *total_count)
|
|
{
|
|
unsigned long total = 0;
|
|
struct devfreq_event_data event;
|
|
int ret, i;
|
|
|
|
*load_count = 0;
|
|
|
|
/* Take into account only read+write counters, but stop all */
|
|
for (i = 0; i < dmc->num_counters; i++) {
|
|
if (!dmc->counter[i])
|
|
continue;
|
|
|
|
ret = devfreq_event_get_event(dmc->counter[i], &event);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*load_count += event.load_count;
|
|
|
|
if (total < event.total_count)
|
|
total = event.total_count;
|
|
}
|
|
|
|
*total_count = total;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_start_perf_events() - Setup and start performance event counters
|
|
* @dmc: device for which the counters are going to be checked
|
|
* @beg_value: initial value for the counter
|
|
*
|
|
* Function which enables needed counters, interrupts and sets initial values
|
|
* then starts the counters.
|
|
*/
|
|
static void exynos5_dmc_start_perf_events(struct exynos5_dmc *dmc,
|
|
u32 beg_value)
|
|
{
|
|
/* Enable interrupts for counter 2 */
|
|
writel(PERF_CNT2, dmc->base_drexi0 + DREX_INTENS_PPC);
|
|
writel(PERF_CNT2, dmc->base_drexi1 + DREX_INTENS_PPC);
|
|
|
|
/* Enable counter 2 and CCNT */
|
|
writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi0 + DREX_CNTENS_PPC);
|
|
writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi1 + DREX_CNTENS_PPC);
|
|
|
|
/* Clear overflow flag for all counters */
|
|
writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi0 + DREX_FLAG_PPC);
|
|
writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi1 + DREX_FLAG_PPC);
|
|
|
|
/* Reset all counters */
|
|
writel(CC_RESET | PPC_COUNTER_RESET, dmc->base_drexi0 + DREX_PMNC_PPC);
|
|
writel(CC_RESET | PPC_COUNTER_RESET, dmc->base_drexi1 + DREX_PMNC_PPC);
|
|
|
|
/*
|
|
* Set start value for the counters, the number of samples that
|
|
* will be gathered is calculated as: 0xffffffff - beg_value
|
|
*/
|
|
writel(beg_value, dmc->base_drexi0 + DREX_PMCNT2_PPC);
|
|
writel(beg_value, dmc->base_drexi1 + DREX_PMCNT2_PPC);
|
|
|
|
/* Start all counters */
|
|
writel(PPC_ENABLE, dmc->base_drexi0 + DREX_PMNC_PPC);
|
|
writel(PPC_ENABLE, dmc->base_drexi1 + DREX_PMNC_PPC);
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_perf_events_calc() - Calculate utilization
|
|
* @dmc: device for which the counters are going to be checked
|
|
* @diff_ts: time between last interrupt and current one
|
|
*
|
|
* Function which calculates needed utilization for the devfreq governor.
|
|
* It prepares values for 'busy_time' and 'total_time' based on elapsed time
|
|
* between interrupts, which approximates utilization.
|
|
*/
|
|
static void exynos5_dmc_perf_events_calc(struct exynos5_dmc *dmc, u64 diff_ts)
|
|
{
|
|
/*
|
|
* This is a simple algorithm for managing traffic on DMC.
|
|
* When there is almost no load the counters overflow every 4s,
|
|
* no mater the DMC frequency.
|
|
* The high load might be approximated using linear function.
|
|
* Knowing that, simple calculation can provide 'busy_time' and
|
|
* 'total_time' to the devfreq governor which picks up target
|
|
* frequency.
|
|
* We want a fast ramp up and slow decay in frequency change function.
|
|
*/
|
|
if (diff_ts < PERF_EVENT_UP_DOWN_THRESHOLD) {
|
|
/*
|
|
* Set higher utilization for the simple_ondemand governor.
|
|
* The governor should increase the frequency of the DMC.
|
|
*/
|
|
dmc->load = 70;
|
|
dmc->total = 100;
|
|
} else {
|
|
/*
|
|
* Set low utilization for the simple_ondemand governor.
|
|
* The governor should decrease the frequency of the DMC.
|
|
*/
|
|
dmc->load = 35;
|
|
dmc->total = 100;
|
|
}
|
|
|
|
dev_dbg(dmc->dev, "diff_ts=%llu\n", diff_ts);
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_perf_events_check() - Checks the status of the counters
|
|
* @dmc: device for which the counters are going to be checked
|
|
*
|
|
* Function which is called from threaded IRQ to check the counters state
|
|
* and to call approximation for the needed utilization.
|
|
*/
|
|
static void exynos5_dmc_perf_events_check(struct exynos5_dmc *dmc)
|
|
{
|
|
u32 val;
|
|
u64 diff_ts, ts;
|
|
|
|
ts = ktime_get_ns();
|
|
|
|
/* Stop all counters */
|
|
writel(0, dmc->base_drexi0 + DREX_PMNC_PPC);
|
|
writel(0, dmc->base_drexi1 + DREX_PMNC_PPC);
|
|
|
|
/* Check the source in interrupt flag registers (which channel) */
|
|
val = readl(dmc->base_drexi0 + DREX_FLAG_PPC);
|
|
if (val) {
|
|
diff_ts = ts - dmc->last_overflow_ts[0];
|
|
dmc->last_overflow_ts[0] = ts;
|
|
dev_dbg(dmc->dev, "drex0 0xE050 val= 0x%08x\n", val);
|
|
} else {
|
|
val = readl(dmc->base_drexi1 + DREX_FLAG_PPC);
|
|
diff_ts = ts - dmc->last_overflow_ts[1];
|
|
dmc->last_overflow_ts[1] = ts;
|
|
dev_dbg(dmc->dev, "drex1 0xE050 val= 0x%08x\n", val);
|
|
}
|
|
|
|
exynos5_dmc_perf_events_calc(dmc, diff_ts);
|
|
|
|
exynos5_dmc_start_perf_events(dmc, PERF_COUNTER_START_VALUE);
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_enable_perf_events() - Enable performance events
|
|
* @dmc: device for which the counters are going to be checked
|
|
*
|
|
* Function which is setup needed environment and enables counters.
|
|
*/
|
|
static void exynos5_dmc_enable_perf_events(struct exynos5_dmc *dmc)
|
|
{
|
|
u64 ts;
|
|
|
|
/* Enable Performance Event Clock */
|
|
writel(PEREV_CLK_EN, dmc->base_drexi0 + DREX_PPCCLKCON);
|
|
writel(PEREV_CLK_EN, dmc->base_drexi1 + DREX_PPCCLKCON);
|
|
|
|
/* Select read transfers as performance event2 */
|
|
writel(READ_TRANSFER_CH0, dmc->base_drexi0 + DREX_PEREV2CONFIG);
|
|
writel(READ_TRANSFER_CH1, dmc->base_drexi1 + DREX_PEREV2CONFIG);
|
|
|
|
ts = ktime_get_ns();
|
|
dmc->last_overflow_ts[0] = ts;
|
|
dmc->last_overflow_ts[1] = ts;
|
|
|
|
/* Devfreq shouldn't be faster than initialization, play safe though. */
|
|
dmc->load = 99;
|
|
dmc->total = 100;
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_disable_perf_events() - Disable performance events
|
|
* @dmc: device for which the counters are going to be checked
|
|
*
|
|
* Function which stops, disables performance event counters and interrupts.
|
|
*/
|
|
static void exynos5_dmc_disable_perf_events(struct exynos5_dmc *dmc)
|
|
{
|
|
/* Stop all counters */
|
|
writel(0, dmc->base_drexi0 + DREX_PMNC_PPC);
|
|
writel(0, dmc->base_drexi1 + DREX_PMNC_PPC);
|
|
|
|
/* Disable interrupts for counter 2 */
|
|
writel(PERF_CNT2, dmc->base_drexi0 + DREX_INTENC_PPC);
|
|
writel(PERF_CNT2, dmc->base_drexi1 + DREX_INTENC_PPC);
|
|
|
|
/* Disable counter 2 and CCNT */
|
|
writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi0 + DREX_CNTENC_PPC);
|
|
writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi1 + DREX_CNTENC_PPC);
|
|
|
|
/* Clear overflow flag for all counters */
|
|
writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi0 + DREX_FLAG_PPC);
|
|
writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi1 + DREX_FLAG_PPC);
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_get_status() - Read current DMC performance statistics.
|
|
* @dev: device for which the statistics are requested
|
|
* @stat: structure which has statistic fields
|
|
*
|
|
* Function reads the DMC performance counters and calculates 'busy_time'
|
|
* and 'total_time'. To protect from overflow, the values are shifted right
|
|
* by 10. After read out the counters are setup to count again.
|
|
*/
|
|
static int exynos5_dmc_get_status(struct device *dev,
|
|
struct devfreq_dev_status *stat)
|
|
{
|
|
struct exynos5_dmc *dmc = dev_get_drvdata(dev);
|
|
unsigned long load, total;
|
|
int ret;
|
|
|
|
if (dmc->in_irq_mode) {
|
|
mutex_lock(&dmc->lock);
|
|
stat->current_frequency = dmc->curr_rate;
|
|
mutex_unlock(&dmc->lock);
|
|
|
|
stat->busy_time = dmc->load;
|
|
stat->total_time = dmc->total;
|
|
} else {
|
|
ret = exynos5_counters_get(dmc, &load, &total);
|
|
if (ret < 0)
|
|
return -EINVAL;
|
|
|
|
/* To protect from overflow, divide by 1024 */
|
|
stat->busy_time = load >> 10;
|
|
stat->total_time = total >> 10;
|
|
|
|
ret = exynos5_counters_set_event(dmc);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not set event counter\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_get_cur_freq() - Function returns current DMC frequency
|
|
* @dev: device for which the framework checks operating frequency
|
|
* @freq: returned frequency value
|
|
*
|
|
* It returns the currently used frequency of the DMC. The real operating
|
|
* frequency might be lower when the clock source value could not be divided
|
|
* to the requested value.
|
|
*/
|
|
static int exynos5_dmc_get_cur_freq(struct device *dev, unsigned long *freq)
|
|
{
|
|
struct exynos5_dmc *dmc = dev_get_drvdata(dev);
|
|
|
|
mutex_lock(&dmc->lock);
|
|
*freq = dmc->curr_rate;
|
|
mutex_unlock(&dmc->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* exynos5_dmc_df_profile - Devfreq governor's profile structure
|
|
*
|
|
* It provides to the devfreq framework needed functions and polling period.
|
|
*/
|
|
static struct devfreq_dev_profile exynos5_dmc_df_profile = {
|
|
.timer = DEVFREQ_TIMER_DELAYED,
|
|
.target = exynos5_dmc_target,
|
|
.get_dev_status = exynos5_dmc_get_status,
|
|
.get_cur_freq = exynos5_dmc_get_cur_freq,
|
|
};
|
|
|
|
/**
|
|
* exynos5_dmc_align_initial_frequency() - Align initial frequency value
|
|
* @dmc: device for which the frequency is going to be set
|
|
* @bootloader_init_freq: initial frequency set by the bootloader in KHz
|
|
*
|
|
* The initial bootloader frequency, which is present during boot, might be
|
|
* different that supported frequency values in the driver. It is possible
|
|
* due to different PLL settings or used PLL as a source.
|
|
* This function provides the 'initial_freq' for the devfreq framework
|
|
* statistics engine which supports only registered values. Thus, some alignment
|
|
* must be made.
|
|
*/
|
|
static unsigned long
|
|
exynos5_dmc_align_init_freq(struct exynos5_dmc *dmc,
|
|
unsigned long bootloader_init_freq)
|
|
{
|
|
unsigned long aligned_freq;
|
|
int idx;
|
|
|
|
idx = find_target_freq_idx(dmc, bootloader_init_freq);
|
|
if (idx >= 0)
|
|
aligned_freq = dmc->opp[idx].freq_hz;
|
|
else
|
|
aligned_freq = dmc->opp[dmc->opp_count - 1].freq_hz;
|
|
|
|
return aligned_freq;
|
|
}
|
|
|
|
/**
|
|
* create_timings_aligned() - Create register values and align with standard
|
|
* @dmc: device for which the frequency is going to be set
|
|
* @reg_timing_row: array to fill with values for timing row register
|
|
* @reg_timing_data: array to fill with values for timing data register
|
|
* @reg_timing_power: array to fill with values for timing power register
|
|
* @clk_period_ps: the period of the clock, known as tCK
|
|
*
|
|
* The function calculates timings and creates a register value ready for
|
|
* a frequency transition. The register contains a few timings. They are
|
|
* shifted by a known offset. The timing value is calculated based on memory
|
|
* specyfication: minimal time required and minimal cycles required.
|
|
*/
|
|
static int create_timings_aligned(struct exynos5_dmc *dmc, u32 *reg_timing_row,
|
|
u32 *reg_timing_data, u32 *reg_timing_power,
|
|
u32 clk_period_ps)
|
|
{
|
|
u32 val;
|
|
const struct timing_reg *reg;
|
|
|
|
if (clk_period_ps == 0)
|
|
return -EINVAL;
|
|
|
|
*reg_timing_row = 0;
|
|
*reg_timing_data = 0;
|
|
*reg_timing_power = 0;
|
|
|
|
val = dmc->timings->tRFC / clk_period_ps;
|
|
val += dmc->timings->tRFC % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tRFC);
|
|
reg = &timing_row_reg_fields[0];
|
|
*reg_timing_row |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tRRD / clk_period_ps;
|
|
val += dmc->timings->tRRD % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tRRD);
|
|
reg = &timing_row_reg_fields[1];
|
|
*reg_timing_row |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tRPab / clk_period_ps;
|
|
val += dmc->timings->tRPab % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tRPab);
|
|
reg = &timing_row_reg_fields[2];
|
|
*reg_timing_row |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tRCD / clk_period_ps;
|
|
val += dmc->timings->tRCD % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tRCD);
|
|
reg = &timing_row_reg_fields[3];
|
|
*reg_timing_row |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tRC / clk_period_ps;
|
|
val += dmc->timings->tRC % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tRC);
|
|
reg = &timing_row_reg_fields[4];
|
|
*reg_timing_row |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tRAS / clk_period_ps;
|
|
val += dmc->timings->tRAS % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tRAS);
|
|
reg = &timing_row_reg_fields[5];
|
|
*reg_timing_row |= TIMING_VAL2REG(reg, val);
|
|
|
|
/* data related timings */
|
|
val = dmc->timings->tWTR / clk_period_ps;
|
|
val += dmc->timings->tWTR % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tWTR);
|
|
reg = &timing_data_reg_fields[0];
|
|
*reg_timing_data |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tWR / clk_period_ps;
|
|
val += dmc->timings->tWR % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tWR);
|
|
reg = &timing_data_reg_fields[1];
|
|
*reg_timing_data |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tRTP / clk_period_ps;
|
|
val += dmc->timings->tRTP % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tRTP);
|
|
reg = &timing_data_reg_fields[2];
|
|
*reg_timing_data |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tW2W_C2C / clk_period_ps;
|
|
val += dmc->timings->tW2W_C2C % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tW2W_C2C);
|
|
reg = &timing_data_reg_fields[3];
|
|
*reg_timing_data |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tR2R_C2C / clk_period_ps;
|
|
val += dmc->timings->tR2R_C2C % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tR2R_C2C);
|
|
reg = &timing_data_reg_fields[4];
|
|
*reg_timing_data |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tWL / clk_period_ps;
|
|
val += dmc->timings->tWL % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tWL);
|
|
reg = &timing_data_reg_fields[5];
|
|
*reg_timing_data |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tDQSCK / clk_period_ps;
|
|
val += dmc->timings->tDQSCK % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tDQSCK);
|
|
reg = &timing_data_reg_fields[6];
|
|
*reg_timing_data |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tRL / clk_period_ps;
|
|
val += dmc->timings->tRL % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tRL);
|
|
reg = &timing_data_reg_fields[7];
|
|
*reg_timing_data |= TIMING_VAL2REG(reg, val);
|
|
|
|
/* power related timings */
|
|
val = dmc->timings->tFAW / clk_period_ps;
|
|
val += dmc->timings->tFAW % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tFAW);
|
|
reg = &timing_power_reg_fields[0];
|
|
*reg_timing_power |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tXSR / clk_period_ps;
|
|
val += dmc->timings->tXSR % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tXSR);
|
|
reg = &timing_power_reg_fields[1];
|
|
*reg_timing_power |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tXP / clk_period_ps;
|
|
val += dmc->timings->tXP % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tXP);
|
|
reg = &timing_power_reg_fields[2];
|
|
*reg_timing_power |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tCKE / clk_period_ps;
|
|
val += dmc->timings->tCKE % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tCKE);
|
|
reg = &timing_power_reg_fields[3];
|
|
*reg_timing_power |= TIMING_VAL2REG(reg, val);
|
|
|
|
val = dmc->timings->tMRD / clk_period_ps;
|
|
val += dmc->timings->tMRD % clk_period_ps ? 1 : 0;
|
|
val = max(val, dmc->min_tck->tMRD);
|
|
reg = &timing_power_reg_fields[4];
|
|
*reg_timing_power |= TIMING_VAL2REG(reg, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* of_get_dram_timings() - helper function for parsing DT settings for DRAM
|
|
* @dmc: device for which the frequency is going to be set
|
|
*
|
|
* The function parses DT entries with DRAM information.
|
|
*/
|
|
static int of_get_dram_timings(struct exynos5_dmc *dmc)
|
|
{
|
|
int ret = 0;
|
|
int idx;
|
|
struct device_node *np_ddr;
|
|
u32 freq_mhz, clk_period_ps;
|
|
|
|
np_ddr = of_parse_phandle(dmc->dev->of_node, "device-handle", 0);
|
|
if (!np_ddr) {
|
|
dev_warn(dmc->dev, "could not find 'device-handle' in DT\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dmc->timing_row = devm_kmalloc_array(dmc->dev, TIMING_COUNT,
|
|
sizeof(u32), GFP_KERNEL);
|
|
if (!dmc->timing_row)
|
|
return -ENOMEM;
|
|
|
|
dmc->timing_data = devm_kmalloc_array(dmc->dev, TIMING_COUNT,
|
|
sizeof(u32), GFP_KERNEL);
|
|
if (!dmc->timing_data)
|
|
return -ENOMEM;
|
|
|
|
dmc->timing_power = devm_kmalloc_array(dmc->dev, TIMING_COUNT,
|
|
sizeof(u32), GFP_KERNEL);
|
|
if (!dmc->timing_power)
|
|
return -ENOMEM;
|
|
|
|
dmc->timings = of_lpddr3_get_ddr_timings(np_ddr, dmc->dev,
|
|
DDR_TYPE_LPDDR3,
|
|
&dmc->timings_arr_size);
|
|
if (!dmc->timings) {
|
|
of_node_put(np_ddr);
|
|
dev_warn(dmc->dev, "could not get timings from DT\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dmc->min_tck = of_lpddr3_get_min_tck(np_ddr, dmc->dev);
|
|
if (!dmc->min_tck) {
|
|
of_node_put(np_ddr);
|
|
dev_warn(dmc->dev, "could not get tck from DT\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Sorted array of OPPs with frequency ascending */
|
|
for (idx = 0; idx < dmc->opp_count; idx++) {
|
|
freq_mhz = dmc->opp[idx].freq_hz / 1000000;
|
|
clk_period_ps = 1000000 / freq_mhz;
|
|
|
|
ret = create_timings_aligned(dmc, &dmc->timing_row[idx],
|
|
&dmc->timing_data[idx],
|
|
&dmc->timing_power[idx],
|
|
clk_period_ps);
|
|
}
|
|
|
|
of_node_put(np_ddr);
|
|
|
|
/* Take the highest frequency's timings as 'bypass' */
|
|
dmc->bypass_timing_row = dmc->timing_row[idx - 1];
|
|
dmc->bypass_timing_data = dmc->timing_data[idx - 1];
|
|
dmc->bypass_timing_power = dmc->timing_power[idx - 1];
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_init_clks() - Initialize clocks needed for DMC operation.
|
|
* @dmc: DMC structure containing needed fields
|
|
*
|
|
* Get the needed clocks defined in DT device, enable and set the right parents.
|
|
* Read current frequency and initialize the initial rate for governor.
|
|
*/
|
|
static int exynos5_dmc_init_clks(struct exynos5_dmc *dmc)
|
|
{
|
|
int ret;
|
|
unsigned long target_volt = 0;
|
|
unsigned long target_rate = 0;
|
|
unsigned int tmp;
|
|
|
|
dmc->fout_spll = devm_clk_get(dmc->dev, "fout_spll");
|
|
if (IS_ERR(dmc->fout_spll))
|
|
return PTR_ERR(dmc->fout_spll);
|
|
|
|
dmc->fout_bpll = devm_clk_get(dmc->dev, "fout_bpll");
|
|
if (IS_ERR(dmc->fout_bpll))
|
|
return PTR_ERR(dmc->fout_bpll);
|
|
|
|
dmc->mout_mclk_cdrex = devm_clk_get(dmc->dev, "mout_mclk_cdrex");
|
|
if (IS_ERR(dmc->mout_mclk_cdrex))
|
|
return PTR_ERR(dmc->mout_mclk_cdrex);
|
|
|
|
dmc->mout_bpll = devm_clk_get(dmc->dev, "mout_bpll");
|
|
if (IS_ERR(dmc->mout_bpll))
|
|
return PTR_ERR(dmc->mout_bpll);
|
|
|
|
dmc->mout_mx_mspll_ccore = devm_clk_get(dmc->dev,
|
|
"mout_mx_mspll_ccore");
|
|
if (IS_ERR(dmc->mout_mx_mspll_ccore))
|
|
return PTR_ERR(dmc->mout_mx_mspll_ccore);
|
|
|
|
dmc->mout_spll = devm_clk_get(dmc->dev, "ff_dout_spll2");
|
|
if (IS_ERR(dmc->mout_spll)) {
|
|
dmc->mout_spll = devm_clk_get(dmc->dev, "mout_sclk_spll");
|
|
if (IS_ERR(dmc->mout_spll))
|
|
return PTR_ERR(dmc->mout_spll);
|
|
}
|
|
|
|
/*
|
|
* Convert frequency to KHz values and set it for the governor.
|
|
*/
|
|
dmc->curr_rate = clk_get_rate(dmc->mout_mclk_cdrex);
|
|
dmc->curr_rate = exynos5_dmc_align_init_freq(dmc, dmc->curr_rate);
|
|
exynos5_dmc_df_profile.initial_freq = dmc->curr_rate;
|
|
|
|
ret = exynos5_dmc_get_volt_freq(dmc, &dmc->curr_rate, &target_rate,
|
|
&target_volt, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dmc->curr_volt = target_volt;
|
|
|
|
clk_set_parent(dmc->mout_mx_mspll_ccore, dmc->mout_spll);
|
|
|
|
clk_prepare_enable(dmc->fout_bpll);
|
|
clk_prepare_enable(dmc->mout_bpll);
|
|
|
|
/*
|
|
* Some bootloaders do not set clock routes correctly.
|
|
* Stop one path in clocks to PHY.
|
|
*/
|
|
regmap_read(dmc->clk_regmap, CDREX_LPDDR3PHY_CLKM_SRC, &tmp);
|
|
tmp &= ~(BIT(1) | BIT(0));
|
|
regmap_write(dmc->clk_regmap, CDREX_LPDDR3PHY_CLKM_SRC, tmp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* exynos5_performance_counters_init() - Initializes performance DMC's counters
|
|
* @dmc: DMC for which it does the setup
|
|
*
|
|
* Initialization of performance counters in DMC for estimating usage.
|
|
* The counter's values are used for calculation of a memory bandwidth and based
|
|
* on that the governor changes the frequency.
|
|
* The counters are not used when the governor is GOVERNOR_USERSPACE.
|
|
*/
|
|
static int exynos5_performance_counters_init(struct exynos5_dmc *dmc)
|
|
{
|
|
int counters_size;
|
|
int ret, i;
|
|
|
|
dmc->num_counters = devfreq_event_get_edev_count(dmc->dev,
|
|
"devfreq-events");
|
|
if (dmc->num_counters < 0) {
|
|
dev_err(dmc->dev, "could not get devfreq-event counters\n");
|
|
return dmc->num_counters;
|
|
}
|
|
|
|
counters_size = sizeof(struct devfreq_event_dev) * dmc->num_counters;
|
|
dmc->counter = devm_kzalloc(dmc->dev, counters_size, GFP_KERNEL);
|
|
if (!dmc->counter)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < dmc->num_counters; i++) {
|
|
dmc->counter[i] =
|
|
devfreq_event_get_edev_by_phandle(dmc->dev,
|
|
"devfreq-events", i);
|
|
if (IS_ERR_OR_NULL(dmc->counter[i]))
|
|
return -EPROBE_DEFER;
|
|
}
|
|
|
|
ret = exynos5_counters_enable_edev(dmc);
|
|
if (ret < 0) {
|
|
dev_err(dmc->dev, "could not enable event counter\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = exynos5_counters_set_event(dmc);
|
|
if (ret < 0) {
|
|
exynos5_counters_disable_edev(dmc);
|
|
dev_err(dmc->dev, "could not set event counter\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_set_pause_on_switching() - Controls a pause feature in DMC
|
|
* @dmc: device which is used for changing this feature
|
|
*
|
|
* There is a need of pausing DREX DMC when divider or MUX in clock tree
|
|
* changes its configuration. In such situation access to the memory is blocked
|
|
* in DMC automatically. This feature is used when clock frequency change
|
|
* request appears and touches clock tree.
|
|
*/
|
|
static inline int exynos5_dmc_set_pause_on_switching(struct exynos5_dmc *dmc)
|
|
{
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(dmc->clk_regmap, CDREX_PAUSE, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val |= 1UL;
|
|
regmap_write(dmc->clk_regmap, CDREX_PAUSE, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t dmc_irq_thread(int irq, void *priv)
|
|
{
|
|
int res;
|
|
struct exynos5_dmc *dmc = priv;
|
|
|
|
mutex_lock(&dmc->df->lock);
|
|
exynos5_dmc_perf_events_check(dmc);
|
|
res = update_devfreq(dmc->df);
|
|
mutex_unlock(&dmc->df->lock);
|
|
|
|
if (res)
|
|
dev_warn(dmc->dev, "devfreq failed with %d\n", res);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_probe() - Probe function for the DMC driver
|
|
* @pdev: platform device for which the driver is going to be initialized
|
|
*
|
|
* Initialize basic components: clocks, regulators, performance counters, etc.
|
|
* Read out product version and based on the information setup
|
|
* internal structures for the controller (frequency and voltage) and for DRAM
|
|
* memory parameters: timings for each operating frequency.
|
|
* Register new devfreq device for controlling DVFS of the DMC.
|
|
*/
|
|
static int exynos5_dmc_probe(struct platform_device *pdev)
|
|
{
|
|
int ret = 0;
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
struct exynos5_dmc *dmc;
|
|
int irq[2];
|
|
|
|
dmc = devm_kzalloc(dev, sizeof(*dmc), GFP_KERNEL);
|
|
if (!dmc)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&dmc->lock);
|
|
|
|
dmc->dev = dev;
|
|
platform_set_drvdata(pdev, dmc);
|
|
|
|
dmc->base_drexi0 = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(dmc->base_drexi0))
|
|
return PTR_ERR(dmc->base_drexi0);
|
|
|
|
dmc->base_drexi1 = devm_platform_ioremap_resource(pdev, 1);
|
|
if (IS_ERR(dmc->base_drexi1))
|
|
return PTR_ERR(dmc->base_drexi1);
|
|
|
|
dmc->clk_regmap = syscon_regmap_lookup_by_phandle(np,
|
|
"samsung,syscon-clk");
|
|
if (IS_ERR(dmc->clk_regmap))
|
|
return PTR_ERR(dmc->clk_regmap);
|
|
|
|
ret = exynos5_init_freq_table(dmc, &exynos5_dmc_df_profile);
|
|
if (ret) {
|
|
dev_warn(dev, "couldn't initialize frequency settings\n");
|
|
return ret;
|
|
}
|
|
|
|
dmc->vdd_mif = devm_regulator_get(dev, "vdd");
|
|
if (IS_ERR(dmc->vdd_mif)) {
|
|
ret = PTR_ERR(dmc->vdd_mif);
|
|
return ret;
|
|
}
|
|
|
|
ret = exynos5_dmc_init_clks(dmc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = of_get_dram_timings(dmc);
|
|
if (ret) {
|
|
dev_warn(dev, "couldn't initialize timings settings\n");
|
|
goto remove_clocks;
|
|
}
|
|
|
|
ret = exynos5_dmc_set_pause_on_switching(dmc);
|
|
if (ret) {
|
|
dev_warn(dev, "couldn't get access to PAUSE register\n");
|
|
goto remove_clocks;
|
|
}
|
|
|
|
/* There is two modes in which the driver works: polling or IRQ */
|
|
irq[0] = platform_get_irq_byname(pdev, "drex_0");
|
|
irq[1] = platform_get_irq_byname(pdev, "drex_1");
|
|
if (irq[0] > 0 && irq[1] > 0 && irqmode) {
|
|
ret = devm_request_threaded_irq(dev, irq[0], NULL,
|
|
dmc_irq_thread, IRQF_ONESHOT,
|
|
dev_name(dev), dmc);
|
|
if (ret) {
|
|
dev_err(dev, "couldn't grab IRQ\n");
|
|
goto remove_clocks;
|
|
}
|
|
|
|
ret = devm_request_threaded_irq(dev, irq[1], NULL,
|
|
dmc_irq_thread, IRQF_ONESHOT,
|
|
dev_name(dev), dmc);
|
|
if (ret) {
|
|
dev_err(dev, "couldn't grab IRQ\n");
|
|
goto remove_clocks;
|
|
}
|
|
|
|
/*
|
|
* Setup default thresholds for the devfreq governor.
|
|
* The values are chosen based on experiments.
|
|
*/
|
|
dmc->gov_data.upthreshold = 55;
|
|
dmc->gov_data.downdifferential = 5;
|
|
|
|
exynos5_dmc_enable_perf_events(dmc);
|
|
|
|
dmc->in_irq_mode = 1;
|
|
} else {
|
|
ret = exynos5_performance_counters_init(dmc);
|
|
if (ret) {
|
|
dev_warn(dev, "couldn't probe performance counters\n");
|
|
goto remove_clocks;
|
|
}
|
|
|
|
/*
|
|
* Setup default thresholds for the devfreq governor.
|
|
* The values are chosen based on experiments.
|
|
*/
|
|
dmc->gov_data.upthreshold = 10;
|
|
dmc->gov_data.downdifferential = 5;
|
|
|
|
exynos5_dmc_df_profile.polling_ms = 100;
|
|
}
|
|
|
|
dmc->df = devm_devfreq_add_device(dev, &exynos5_dmc_df_profile,
|
|
DEVFREQ_GOV_SIMPLE_ONDEMAND,
|
|
&dmc->gov_data);
|
|
|
|
if (IS_ERR(dmc->df)) {
|
|
ret = PTR_ERR(dmc->df);
|
|
goto err_devfreq_add;
|
|
}
|
|
|
|
if (dmc->in_irq_mode)
|
|
exynos5_dmc_start_perf_events(dmc, PERF_COUNTER_START_VALUE);
|
|
|
|
dev_info(dev, "DMC initialized, in irq mode: %d\n", dmc->in_irq_mode);
|
|
|
|
return 0;
|
|
|
|
err_devfreq_add:
|
|
if (dmc->in_irq_mode)
|
|
exynos5_dmc_disable_perf_events(dmc);
|
|
else
|
|
exynos5_counters_disable_edev(dmc);
|
|
remove_clocks:
|
|
clk_disable_unprepare(dmc->mout_bpll);
|
|
clk_disable_unprepare(dmc->fout_bpll);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* exynos5_dmc_remove() - Remove function for the platform device
|
|
* @pdev: platform device which is going to be removed
|
|
*
|
|
* The function relies on 'devm' framework function which automatically
|
|
* clean the device's resources. It just calls explicitly disable function for
|
|
* the performance counters.
|
|
*/
|
|
static int exynos5_dmc_remove(struct platform_device *pdev)
|
|
{
|
|
struct exynos5_dmc *dmc = dev_get_drvdata(&pdev->dev);
|
|
|
|
if (dmc->in_irq_mode)
|
|
exynos5_dmc_disable_perf_events(dmc);
|
|
else
|
|
exynos5_counters_disable_edev(dmc);
|
|
|
|
clk_disable_unprepare(dmc->mout_bpll);
|
|
clk_disable_unprepare(dmc->fout_bpll);
|
|
|
|
dev_pm_opp_remove_table(dmc->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id exynos5_dmc_of_match[] = {
|
|
{ .compatible = "samsung,exynos5422-dmc", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, exynos5_dmc_of_match);
|
|
|
|
static struct platform_driver exynos5_dmc_platdrv = {
|
|
.probe = exynos5_dmc_probe,
|
|
.remove = exynos5_dmc_remove,
|
|
.driver = {
|
|
.name = "exynos5-dmc",
|
|
.of_match_table = exynos5_dmc_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(exynos5_dmc_platdrv);
|
|
MODULE_DESCRIPTION("Driver for Exynos5422 Dynamic Memory Controller dynamic frequency and voltage change");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Lukasz Luba");
|