mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 08:58:07 +00:00
7a79e94e97
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
579 lines
14 KiB
C
579 lines
14 KiB
C
/*
|
|
* wm8523.c -- WM8523 ALSA SoC Audio driver
|
|
*
|
|
* Copyright 2009 Wolfson Microelectronics plc
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of_device.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/tlv.h>
|
|
|
|
#include "wm8523.h"
|
|
|
|
#define WM8523_NUM_SUPPLIES 2
|
|
static const char *wm8523_supply_names[WM8523_NUM_SUPPLIES] = {
|
|
"AVDD",
|
|
"LINEVDD",
|
|
};
|
|
|
|
#define WM8523_NUM_RATES 7
|
|
|
|
/* codec private data */
|
|
struct wm8523_priv {
|
|
struct regmap *regmap;
|
|
struct regulator_bulk_data supplies[WM8523_NUM_SUPPLIES];
|
|
unsigned int sysclk;
|
|
unsigned int rate_constraint_list[WM8523_NUM_RATES];
|
|
struct snd_pcm_hw_constraint_list rate_constraint;
|
|
};
|
|
|
|
static const struct reg_default wm8523_reg_defaults[] = {
|
|
{ 2, 0x0000 }, /* R2 - PSCTRL1 */
|
|
{ 3, 0x1812 }, /* R3 - AIF_CTRL1 */
|
|
{ 4, 0x0000 }, /* R4 - AIF_CTRL2 */
|
|
{ 5, 0x0001 }, /* R5 - DAC_CTRL3 */
|
|
{ 6, 0x0190 }, /* R6 - DAC_GAINL */
|
|
{ 7, 0x0190 }, /* R7 - DAC_GAINR */
|
|
{ 8, 0x0000 }, /* R8 - ZERO_DETECT */
|
|
};
|
|
|
|
static bool wm8523_volatile_register(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case WM8523_DEVICE_ID:
|
|
case WM8523_REVISION:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const DECLARE_TLV_DB_SCALE(dac_tlv, -10000, 25, 0);
|
|
|
|
static const char *wm8523_zd_count_text[] = {
|
|
"1024",
|
|
"2048",
|
|
};
|
|
|
|
static const struct soc_enum wm8523_zc_count =
|
|
SOC_ENUM_SINGLE(WM8523_ZERO_DETECT, 0, 2, wm8523_zd_count_text);
|
|
|
|
static const struct snd_kcontrol_new wm8523_controls[] = {
|
|
SOC_DOUBLE_R_TLV("Playback Volume", WM8523_DAC_GAINL, WM8523_DAC_GAINR,
|
|
0, 448, 0, dac_tlv),
|
|
SOC_SINGLE("ZC Switch", WM8523_DAC_CTRL3, 4, 1, 0),
|
|
SOC_SINGLE("Playback Deemphasis Switch", WM8523_AIF_CTRL1, 8, 1, 0),
|
|
SOC_DOUBLE("Playback Switch", WM8523_DAC_CTRL3, 2, 3, 1, 1),
|
|
SOC_SINGLE("Volume Ramp Up Switch", WM8523_DAC_CTRL3, 1, 1, 0),
|
|
SOC_SINGLE("Volume Ramp Down Switch", WM8523_DAC_CTRL3, 0, 1, 0),
|
|
SOC_ENUM("Zero Detect Count", wm8523_zc_count),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm8523_dapm_widgets[] = {
|
|
SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_OUTPUT("LINEVOUTL"),
|
|
SND_SOC_DAPM_OUTPUT("LINEVOUTR"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route wm8523_dapm_routes[] = {
|
|
{ "LINEVOUTL", NULL, "DAC" },
|
|
{ "LINEVOUTR", NULL, "DAC" },
|
|
};
|
|
|
|
static struct {
|
|
int value;
|
|
int ratio;
|
|
} lrclk_ratios[WM8523_NUM_RATES] = {
|
|
{ 1, 128 },
|
|
{ 2, 192 },
|
|
{ 3, 256 },
|
|
{ 4, 384 },
|
|
{ 5, 512 },
|
|
{ 6, 768 },
|
|
{ 7, 1152 },
|
|
};
|
|
|
|
static int wm8523_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
/* The set of sample rates that can be supported depends on the
|
|
* MCLK supplied to the CODEC - enforce this.
|
|
*/
|
|
if (!wm8523->sysclk) {
|
|
dev_err(codec->dev,
|
|
"No MCLK configured, call set_sysclk() on init\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_pcm_hw_constraint_list(substream->runtime, 0,
|
|
SNDRV_PCM_HW_PARAM_RATE,
|
|
&wm8523->rate_constraint);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8523_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
|
|
int i;
|
|
u16 aifctrl1 = snd_soc_read(codec, WM8523_AIF_CTRL1);
|
|
u16 aifctrl2 = snd_soc_read(codec, WM8523_AIF_CTRL2);
|
|
|
|
/* Find a supported LRCLK ratio */
|
|
for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) {
|
|
if (wm8523->sysclk / params_rate(params) ==
|
|
lrclk_ratios[i].ratio)
|
|
break;
|
|
}
|
|
|
|
/* Should never happen, should be handled by constraints */
|
|
if (i == ARRAY_SIZE(lrclk_ratios)) {
|
|
dev_err(codec->dev, "MCLK/fs ratio %d unsupported\n",
|
|
wm8523->sysclk / params_rate(params));
|
|
return -EINVAL;
|
|
}
|
|
|
|
aifctrl2 &= ~WM8523_SR_MASK;
|
|
aifctrl2 |= lrclk_ratios[i].value;
|
|
|
|
aifctrl1 &= ~WM8523_WL_MASK;
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S20_3LE:
|
|
aifctrl1 |= 0x8;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
aifctrl1 |= 0x10;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
aifctrl1 |= 0x18;
|
|
break;
|
|
}
|
|
|
|
snd_soc_write(codec, WM8523_AIF_CTRL1, aifctrl1);
|
|
snd_soc_write(codec, WM8523_AIF_CTRL2, aifctrl2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8523_set_dai_sysclk(struct snd_soc_dai *codec_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
|
|
unsigned int val;
|
|
int i;
|
|
|
|
wm8523->sysclk = freq;
|
|
|
|
wm8523->rate_constraint.count = 0;
|
|
for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) {
|
|
val = freq / lrclk_ratios[i].ratio;
|
|
/* Check that it's a standard rate since core can't
|
|
* cope with others and having the odd rates confuses
|
|
* constraint matching.
|
|
*/
|
|
switch (val) {
|
|
case 8000:
|
|
case 11025:
|
|
case 16000:
|
|
case 22050:
|
|
case 32000:
|
|
case 44100:
|
|
case 48000:
|
|
case 64000:
|
|
case 88200:
|
|
case 96000:
|
|
case 176400:
|
|
case 192000:
|
|
dev_dbg(codec->dev, "Supported sample rate: %dHz\n",
|
|
val);
|
|
wm8523->rate_constraint_list[i] = val;
|
|
wm8523->rate_constraint.count++;
|
|
break;
|
|
default:
|
|
dev_dbg(codec->dev, "Skipping sample rate: %dHz\n",
|
|
val);
|
|
}
|
|
}
|
|
|
|
/* Need at least one supported rate... */
|
|
if (wm8523->rate_constraint.count == 0)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int wm8523_set_dai_fmt(struct snd_soc_dai *codec_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
u16 aifctrl1 = snd_soc_read(codec, WM8523_AIF_CTRL1);
|
|
|
|
aifctrl1 &= ~(WM8523_BCLK_INV_MASK | WM8523_LRCLK_INV_MASK |
|
|
WM8523_FMT_MASK | WM8523_AIF_MSTR_MASK);
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
aifctrl1 |= WM8523_AIF_MSTR;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
aifctrl1 |= 0x0002;
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
aifctrl1 |= 0x0001;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
aifctrl1 |= 0x0003;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
aifctrl1 |= 0x0023;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
aifctrl1 |= WM8523_BCLK_INV | WM8523_LRCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
aifctrl1 |= WM8523_BCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
aifctrl1 |= WM8523_LRCLK_INV;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_soc_write(codec, WM8523_AIF_CTRL1, aifctrl1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8523_set_bias_level(struct snd_soc_codec *codec,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
|
|
int ret;
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
break;
|
|
|
|
case SND_SOC_BIAS_PREPARE:
|
|
/* Full power on */
|
|
snd_soc_update_bits(codec, WM8523_PSCTRL1,
|
|
WM8523_SYS_ENA_MASK, 3);
|
|
break;
|
|
|
|
case SND_SOC_BIAS_STANDBY:
|
|
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies),
|
|
wm8523->supplies);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev,
|
|
"Failed to enable supplies: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Sync back default/cached values */
|
|
regcache_sync(wm8523->regmap);
|
|
|
|
/* Initial power up */
|
|
snd_soc_update_bits(codec, WM8523_PSCTRL1,
|
|
WM8523_SYS_ENA_MASK, 1);
|
|
|
|
msleep(100);
|
|
}
|
|
|
|
/* Power up to mute */
|
|
snd_soc_update_bits(codec, WM8523_PSCTRL1,
|
|
WM8523_SYS_ENA_MASK, 2);
|
|
|
|
break;
|
|
|
|
case SND_SOC_BIAS_OFF:
|
|
/* The chip runs through the power down sequence for us. */
|
|
snd_soc_update_bits(codec, WM8523_PSCTRL1,
|
|
WM8523_SYS_ENA_MASK, 0);
|
|
msleep(100);
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies),
|
|
wm8523->supplies);
|
|
break;
|
|
}
|
|
codec->dapm.bias_level = level;
|
|
return 0;
|
|
}
|
|
|
|
#define WM8523_RATES SNDRV_PCM_RATE_8000_192000
|
|
|
|
#define WM8523_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
|
|
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static const struct snd_soc_dai_ops wm8523_dai_ops = {
|
|
.startup = wm8523_startup,
|
|
.hw_params = wm8523_hw_params,
|
|
.set_sysclk = wm8523_set_dai_sysclk,
|
|
.set_fmt = wm8523_set_dai_fmt,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver wm8523_dai = {
|
|
.name = "wm8523-hifi",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 2, /* Mono modes not yet supported */
|
|
.channels_max = 2,
|
|
.rates = WM8523_RATES,
|
|
.formats = WM8523_FORMATS,
|
|
},
|
|
.ops = &wm8523_dai_ops,
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
static int wm8523_suspend(struct snd_soc_codec *codec)
|
|
{
|
|
wm8523_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
return 0;
|
|
}
|
|
|
|
static int wm8523_resume(struct snd_soc_codec *codec)
|
|
{
|
|
wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
return 0;
|
|
}
|
|
#else
|
|
#define wm8523_suspend NULL
|
|
#define wm8523_resume NULL
|
|
#endif
|
|
|
|
static int wm8523_probe(struct snd_soc_codec *codec)
|
|
{
|
|
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
|
|
int ret;
|
|
|
|
wm8523->rate_constraint.list = &wm8523->rate_constraint_list[0];
|
|
wm8523->rate_constraint.count =
|
|
ARRAY_SIZE(wm8523->rate_constraint_list);
|
|
|
|
ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_REGMAP);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Change some default settings - latch VU and enable ZC */
|
|
snd_soc_update_bits(codec, WM8523_DAC_GAINR,
|
|
WM8523_DACR_VU, WM8523_DACR_VU);
|
|
snd_soc_update_bits(codec, WM8523_DAC_CTRL3, WM8523_ZC, WM8523_ZC);
|
|
|
|
wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8523_remove(struct snd_soc_codec *codec)
|
|
{
|
|
wm8523_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_codec_driver soc_codec_dev_wm8523 = {
|
|
.probe = wm8523_probe,
|
|
.remove = wm8523_remove,
|
|
.suspend = wm8523_suspend,
|
|
.resume = wm8523_resume,
|
|
.set_bias_level = wm8523_set_bias_level,
|
|
|
|
.controls = wm8523_controls,
|
|
.num_controls = ARRAY_SIZE(wm8523_controls),
|
|
.dapm_widgets = wm8523_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(wm8523_dapm_widgets),
|
|
.dapm_routes = wm8523_dapm_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(wm8523_dapm_routes),
|
|
};
|
|
|
|
static const struct of_device_id wm8523_of_match[] = {
|
|
{ .compatible = "wlf,wm8523" },
|
|
{ },
|
|
};
|
|
|
|
static const struct regmap_config wm8523_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
.max_register = WM8523_ZERO_DETECT,
|
|
|
|
.reg_defaults = wm8523_reg_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(wm8523_reg_defaults),
|
|
.cache_type = REGCACHE_RBTREE,
|
|
|
|
.volatile_reg = wm8523_volatile_register,
|
|
};
|
|
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
static int wm8523_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct wm8523_priv *wm8523;
|
|
unsigned int val;
|
|
int ret, i;
|
|
|
|
wm8523 = devm_kzalloc(&i2c->dev, sizeof(struct wm8523_priv),
|
|
GFP_KERNEL);
|
|
if (wm8523 == NULL)
|
|
return -ENOMEM;
|
|
|
|
wm8523->regmap = devm_regmap_init_i2c(i2c, &wm8523_regmap);
|
|
if (IS_ERR(wm8523->regmap)) {
|
|
ret = PTR_ERR(wm8523->regmap);
|
|
dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm8523->supplies); i++)
|
|
wm8523->supplies[i].supply = wm8523_supply_names[i];
|
|
|
|
ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8523->supplies),
|
|
wm8523->supplies);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies),
|
|
wm8523->supplies);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_read(wm8523->regmap, WM8523_DEVICE_ID, &val);
|
|
if (ret < 0) {
|
|
dev_err(&i2c->dev, "Failed to read ID register\n");
|
|
goto err_enable;
|
|
}
|
|
if (val != 0x8523) {
|
|
dev_err(&i2c->dev, "Device is not a WM8523, ID is %x\n", ret);
|
|
ret = -EINVAL;
|
|
goto err_enable;
|
|
}
|
|
|
|
ret = regmap_read(wm8523->regmap, WM8523_REVISION, &val);
|
|
if (ret < 0) {
|
|
dev_err(&i2c->dev, "Failed to read revision register\n");
|
|
goto err_enable;
|
|
}
|
|
dev_info(&i2c->dev, "revision %c\n",
|
|
(val & WM8523_CHIP_REV_MASK) + 'A');
|
|
|
|
ret = regmap_write(wm8523->regmap, WM8523_DEVICE_ID, 0x8523);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to reset device: %d\n", ret);
|
|
goto err_enable;
|
|
}
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
|
|
|
|
i2c_set_clientdata(i2c, wm8523);
|
|
|
|
ret = snd_soc_register_codec(&i2c->dev,
|
|
&soc_codec_dev_wm8523, &wm8523_dai, 1);
|
|
|
|
return ret;
|
|
|
|
err_enable:
|
|
regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
|
|
return ret;
|
|
}
|
|
|
|
static int wm8523_i2c_remove(struct i2c_client *client)
|
|
{
|
|
snd_soc_unregister_codec(&client->dev);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id wm8523_i2c_id[] = {
|
|
{ "wm8523", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, wm8523_i2c_id);
|
|
|
|
static struct i2c_driver wm8523_i2c_driver = {
|
|
.driver = {
|
|
.name = "wm8523",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = wm8523_of_match,
|
|
},
|
|
.probe = wm8523_i2c_probe,
|
|
.remove = wm8523_i2c_remove,
|
|
.id_table = wm8523_i2c_id,
|
|
};
|
|
#endif
|
|
|
|
static int __init wm8523_modinit(void)
|
|
{
|
|
int ret;
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
ret = i2c_add_driver(&wm8523_i2c_driver);
|
|
if (ret != 0) {
|
|
printk(KERN_ERR "Failed to register WM8523 I2C driver: %d\n",
|
|
ret);
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
module_init(wm8523_modinit);
|
|
|
|
static void __exit wm8523_exit(void)
|
|
{
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
i2c_del_driver(&wm8523_i2c_driver);
|
|
#endif
|
|
}
|
|
module_exit(wm8523_exit);
|
|
|
|
MODULE_DESCRIPTION("ASoC WM8523 driver");
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_LICENSE("GPL");
|