linux-stable/drivers/thermal
Linus Torvalds 773ac53bbf - Fix out-of-spec hardware (1st gen Hygon) which does not implement
MSR_AMD64_SEV even though the spec clearly states so, and check CPUID
 bits first.
 
 - Send only one signal to a task when it is a SEGV_PKUERR si_code type.
 
 - Do away with all the wankery of reserving X amount of memory in
 the first megabyte to prevent BIOS corrupting it and simply and
 unconditionally reserve the whole first megabyte.
 
 - Make alternatives NOP optimization work at an arbitrary position
 within the patched sequence because the compiler can put single-byte
 NOPs for alignment anywhere in the sequence (32-bit retpoline), vs our
 previous assumption that the NOPs are only appended.
 
 - Force-disable ENQCMD[S] instructions support and remove update_pasid()
 because of insufficient protection against FPU state modification in an
 interrupt context, among other xstate horrors which are being addressed
 at the moment. This one limits the fallout until proper enablement.
 
 - Use cpu_feature_enabled() in the idxd driver so that it can be
 build-time disabled through the defines in .../asm/disabled-features.h.
 
 - Fix LVT thermal setup for SMI delivery mode by making sure the APIC
 LVT value is read before APIC initialization so that softlockups during
 boot do not happen at least on one machine.
 
 - Mark all legacy interrupts as legacy vectors when the IO-APIC is
 disabled and when all legacy interrupts are routed through the PIC.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmC8fdEACgkQEsHwGGHe
 VUqO5A/+IbIo8myl8VPjw6HRnHgY8rsYRjxdtmVhbaMi5XOmTMfVA9zJ6QALxseo
 Mar8bmWcezEs0/FmNvk1vEOtIgZvRVy5RqXbu3W2EgWICuzRWbj822q+KrkbY0tH
 1GWjcZQO8VlgeuQsukyj5QHaBLffpn3Fh1XB8r0cktZvwciM+LRNMnK8d6QjqxNM
 ctTX4wdI6kc076pOi7MhKxSe+/xo5Wnf27lClLMOcsO/SS42KqgeRM5psWqxihhL
 j6Y3Oe+Nm+7GKF8y841PUSlwjgWmlZa6UkR6DBTP7DGnHDa5hMpzxYvHOquq/SbA
 leV9OLqI0iWs56kSzbEcXo7do1kld62KjsA2KtUhJfVAtm+igQLh5G0jESBwrWca
 TBWaE5kt6s8wP7LXeg26o4U8XD8vqEH88Tmsjlgqb/t/PKDV9PMGvNpF00dPZFo6
 Jhj2yntJYjLQYoAQLuQm5pfnKhZy3KKvk7ViGcnp3iN9i4eU9HzawIiXnliNOrTI
 ohQ9KoRhy1Cx0UfLkR+cdK4ks0u26DC2/Ewt0CE5AP/CQ1rX6Zbv2gFLjSpy7yQo
 6A99HEpbaLuy3kDt5vn91viPNUlOveuIXIdHp6u+zgFfx88eLUoEvfR135aV/Gyh
 p5PJm/BO99KByQzFCnilkp7nBeKtnKYSmUojA6JsZKjzJimSPYo=
 =zRI1
 -----END PGP SIGNATURE-----

Merge tag 'x86_urgent_for_v5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:
 "A bunch of x86/urgent stuff accumulated for the last two weeks so
  lemme unload it to you.

  It should be all totally risk-free, of course. :-)

   - Fix out-of-spec hardware (1st gen Hygon) which does not implement
     MSR_AMD64_SEV even though the spec clearly states so, and check
     CPUID bits first.

   - Send only one signal to a task when it is a SEGV_PKUERR si_code
     type.

   - Do away with all the wankery of reserving X amount of memory in the
     first megabyte to prevent BIOS corrupting it and simply and
     unconditionally reserve the whole first megabyte.

   - Make alternatives NOP optimization work at an arbitrary position
     within the patched sequence because the compiler can put
     single-byte NOPs for alignment anywhere in the sequence (32-bit
     retpoline), vs our previous assumption that the NOPs are only
     appended.

   - Force-disable ENQCMD[S] instructions support and remove
     update_pasid() because of insufficient protection against FPU state
     modification in an interrupt context, among other xstate horrors
     which are being addressed at the moment. This one limits the
     fallout until proper enablement.

   - Use cpu_feature_enabled() in the idxd driver so that it can be
     build-time disabled through the defines in disabled-features.h.

   - Fix LVT thermal setup for SMI delivery mode by making sure the APIC
     LVT value is read before APIC initialization so that softlockups
     during boot do not happen at least on one machine.

   - Mark all legacy interrupts as legacy vectors when the IO-APIC is
     disabled and when all legacy interrupts are routed through the PIC"

* tag 'x86_urgent_for_v5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev: Check SME/SEV support in CPUID first
  x86/fault: Don't send SIGSEGV twice on SEGV_PKUERR
  x86/setup: Always reserve the first 1M of RAM
  x86/alternative: Optimize single-byte NOPs at an arbitrary position
  x86/cpufeatures: Force disable X86_FEATURE_ENQCMD and remove update_pasid()
  dmaengine: idxd: Use cpu_feature_enabled()
  x86/thermal: Fix LVT thermal setup for SMI delivery mode
  x86/apic: Mark _all_ legacy interrupts when IO/APIC is missing
2021-06-06 12:25:43 -07:00
..
broadcom thermal/drivers/bcm2835: Remove redundant dev_err call in bcm2835_thermal_probe() 2021-04-20 08:58:47 +02:00
intel - Fix out-of-spec hardware (1st gen Hygon) which does not implement 2021-06-06 12:25:43 -07:00
qcom thermal/drivers/qcom: Fix error code in adc_tm5_get_dt_channel_data() 2021-05-27 11:38:34 +02:00
samsung thermal: exynos: Silence warning during deferred probe 2020-03-12 11:56:53 +01:00
st thermal: stm32: simplify the return expression of stm_thermal_prepare() 2020-10-12 12:08:35 +02:00
tegra thermal/drivers/tegra: Use devm_platform_ioremap_resource_byname 2021-04-20 09:18:58 +02:00
ti-soc-thermal thermal/ti-soc-thermal: Fix kernel-doc 2021-05-24 22:38:05 +02:00
Kconfig thermal/drivers/zx: Remove zx driver 2021-02-03 09:17:47 +01:00
Makefile thermal/drivers/zx: Remove zx driver 2021-02-03 09:17:47 +01:00
amlogic_thermal.c thermal: amlogic: Omit superfluous error message in amlogic_thermal_probe() 2021-03-10 12:52:55 +01:00
armada_thermal.c thermal: Explicitly enable non-changing thermal zone devices 2020-06-29 20:26:37 +02:00
cpufreq_cooling.c thermal/drivers/cpufreq_cooling: Fix slab OOB issue 2021-04-15 13:21:42 +02:00
cpuidle_cooling.c thermal/drivers/cpuidle_cooling: Fix use after error 2021-04-15 13:21:26 +02:00
da9062-thermal.c thermal/core: Remove ms based delay fields 2021-01-19 22:23:49 +01:00
db8500_thermal.c thermal: db8500: Depromote debug print 2020-01-27 10:24:32 +01:00
devfreq_cooling.c thermal/drivers/devfreq_cooling: Fix wrong return on error path 2021-04-15 13:21:16 +02:00
dove_thermal.c thermal: Explicitly enable non-changing thermal zone devices 2020-06-29 20:26:37 +02:00
gov_bang_bang.c thermal: step_wise: Appease the kernel-doc deity 2020-01-27 10:24:32 +01:00
gov_fair_share.c thermal/core/fair share: Use the lockless __thermal_cdev_update() function 2021-04-22 23:51:32 +02:00
gov_power_allocator.c thermal/core/power allocator: Use the lockless __thermal_cdev_update() function 2021-04-22 23:51:32 +02:00
gov_step_wise.c thermal/core: Remove the 'forced_passive' option 2021-01-19 22:22:45 +01:00
gov_user_space.c thermal/governors: Prefix all source files with gov_ 2020-05-22 18:48:54 +02:00
hisi_thermal.c thermal/drivers/hisi: Remove redundant dev_err call in hisi_thermal_probe() 2021-04-20 09:18:57 +02:00
imx8mm_thermal.c thermal: imx8mm: Disable the clock on probe failure 2020-12-04 20:46:03 +01:00
imx_sc_thermal.c - Add the hwmon support on the i.MX SC (Anson Huang) 2020-06-12 14:10:21 -07:00
imx_thermal.c thermal: imx: Use dev_err_probe() to simplify error handling 2020-10-12 12:08:34 +02:00
k3_bandgap.c thermal: k3: Add support for bandgap sensors 2020-04-14 11:41:12 +02:00
khadas_mcu_fan.c thermal/core: Make cooling device state change private 2021-01-19 22:31:10 +01:00
kirkwood_thermal.c thermal: Explicitly enable non-changing thermal zone devices 2020-06-29 20:26:37 +02:00
max77620_thermal.c thermal: max77620: Appease the kernel-doc deity 2020-01-27 10:24:32 +01:00
mtk_thermal.c thermal/drivers/mtk_thermal: Remove redundant initializations of several variables 2021-04-22 23:51:32 +02:00
qoriq_thermal.c thermal: qoriq: Update the settings for TMUv2 2020-05-29 20:26:51 +02:00
rcar_gen3_thermal.c thermal: rcar_gen3_thermal: Add support for up to five TSC nodes 2021-03-10 12:58:28 +01:00
rcar_thermal.c thermal/drivers/rcar: Remove notification usage 2020-12-15 17:01:55 +01:00
rockchip_thermal.c thermal: Use mode helpers in drivers 2020-06-29 20:26:36 +02:00
spear_thermal.c thermal: Explicitly enable non-changing thermal zone devices 2020-06-29 20:26:37 +02:00
sprd_thermal.c - Add support to enable/disable the thermal zones resulting on core code and 2020-08-06 18:10:55 -07:00
sun8i_thermal.c thermal: Fix couple of spellos in the file sun8i_thermal.c 2021-03-10 12:54:58 +01:00
thermal-generic-adc.c thermal: generic-adc: silence info message for IIO_TEMP channels 2020-01-27 10:24:32 +01:00
thermal_core.c thermal/core: Remove thermal_notify_framework 2021-04-22 13:14:09 +02:00
thermal_core.h thermal/core: Create a helper __thermal_cdev_update() without a lock 2021-04-22 14:10:28 +02:00
thermal_helpers.c thermal/core: Create a helper __thermal_cdev_update() without a lock 2021-04-22 14:10:28 +02:00
thermal_hwmon.c thermal/drivers/hwmon: Cleanup coding style a bit 2020-11-12 11:24:01 +01:00
thermal_hwmon.h thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs() 2020-01-27 10:24:32 +01:00
thermal_mmio.c thermal/drivers/thermal_mmio: Remove redundant dev_err call in thermal_mmio_probe() 2021-04-20 08:58:47 +02:00
thermal_netlink.c - Fix Kconfig typo "acces" -> "access" (Colin Ian King) 2020-10-17 10:40:22 -07:00
thermal_netlink.h thermal: netlink: Improve the initcall ordering 2020-07-21 10:40:08 +02:00
thermal_of.c thermal: thermal_of: Fix error return code of thermal_of_populate_bind_params() 2021-03-10 13:41:33 +01:00
thermal_sysfs.c thermal/core: Add NULL pointer check before using cooling device stats 2021-03-17 09:55:58 +01:00
uniphier_thermal.c