mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-15 23:25:07 +00:00
087bb28329
The diagnostic register holds the errata bits. Mostly bootloader does not bring up secondary cores, so that when errata bits are set in bootloader, they are set only for boot cpu. But on a SMP configuration, it should be equally done on every single core. Set up the diagnostic register for secondary cores by replicating the register from boot cpu. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
71 lines
1.6 KiB
ArmAsm
71 lines
1.6 KiB
ArmAsm
/*
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
* Copyright 2011 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/hardware/cache-l2x0.h>
|
|
|
|
.section ".text.head", "ax"
|
|
|
|
#ifdef CONFIG_SMP
|
|
diag_reg_offset:
|
|
.word g_diag_reg - .
|
|
|
|
.macro set_diag_reg
|
|
adr r0, diag_reg_offset
|
|
ldr r1, [r0]
|
|
add r1, r1, r0 @ r1 = physical &g_diag_reg
|
|
ldr r0, [r1]
|
|
mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
|
|
.endm
|
|
|
|
ENTRY(v7_secondary_startup)
|
|
bl v7_invalidate_l1
|
|
set_diag_reg
|
|
b secondary_startup
|
|
ENDPROC(v7_secondary_startup)
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARM_CPU_SUSPEND
|
|
/*
|
|
* The following code must assume it is running from physical address
|
|
* where absolute virtual addresses to the data section have to be
|
|
* turned into relative ones.
|
|
*/
|
|
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
.macro pl310_resume
|
|
adr r0, l2x0_saved_regs_offset
|
|
ldr r2, [r0]
|
|
add r2, r2, r0
|
|
ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
|
|
ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value
|
|
str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
|
|
mov r1, #0x1
|
|
str r1, [r0, #L2X0_CTRL] @ re-enable L2
|
|
.endm
|
|
|
|
l2x0_saved_regs_offset:
|
|
.word l2x0_saved_regs - .
|
|
|
|
#else
|
|
.macro pl310_resume
|
|
.endm
|
|
#endif
|
|
|
|
ENTRY(v7_cpu_resume)
|
|
bl v7_invalidate_l1
|
|
pl310_resume
|
|
b cpu_resume
|
|
ENDPROC(v7_cpu_resume)
|
|
#endif
|