mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-19 00:55:18 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/gpu/drm/panel/panel-sitronix-st7701.c
Marek Vasut c62102165d drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure 
In case mipi_dsi_attach() fails, call drm_panel_remove() to
avoid memory leak.

Fixes: 849b2e3ff9 ("drm/panel: Add Sitronix ST7701 panel driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014231106.468063-1-marex@denx.de
2022-11-01 23:12:06 +01:00

795 lines
25 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019, Amarula Solutions.
* Author: Jagan Teki <jagan@amarulasolutions.com>
*/
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
#include <linux/bitfield.h>
#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regulator/consumer.h>
#include <video/mipi_display.h>
/* Command2 BKx selection command */
#define DSI_CMD2BKX_SEL 0xFF
#define DSI_CMD1 0
#define DSI_CMD2 BIT(4)
#define DSI_CMD2BK_MASK GENMASK(3, 0)
/* Command2, BK0 commands */
#define DSI_CMD2_BK0_PVGAMCTRL 0xB0 /* Positive Voltage Gamma Control */
#define DSI_CMD2_BK0_NVGAMCTRL 0xB1 /* Negative Voltage Gamma Control */
#define DSI_CMD2_BK0_LNESET 0xC0 /* Display Line setting */
#define DSI_CMD2_BK0_PORCTRL 0xC1 /* Porch control */
#define DSI_CMD2_BK0_INVSEL 0xC2 /* Inversion selection, Frame Rate Control */
/* Command2, BK1 commands */
#define DSI_CMD2_BK1_VRHS 0xB0 /* Vop amplitude setting */
#define DSI_CMD2_BK1_VCOM 0xB1 /* VCOM amplitude setting */
#define DSI_CMD2_BK1_VGHSS 0xB2 /* VGH Voltage setting */
#define DSI_CMD2_BK1_TESTCMD 0xB3 /* TEST Command Setting */
#define DSI_CMD2_BK1_VGLS 0xB5 /* VGL Voltage setting */
#define DSI_CMD2_BK1_PWCTLR1 0xB7 /* Power Control 1 */
#define DSI_CMD2_BK1_PWCTLR2 0xB8 /* Power Control 2 */
#define DSI_CMD2_BK1_SPD1 0xC1 /* Source pre_drive timing set1 */
#define DSI_CMD2_BK1_SPD2 0xC2 /* Source EQ2 Setting */
#define DSI_CMD2_BK1_MIPISET1 0xD0 /* MIPI Setting 1 */
/* Command2, BK0 bytes */
#define DSI_CMD2_BK0_GAMCTRL_AJ_MASK GENMASK(7, 6)
#define DSI_CMD2_BK0_GAMCTRL_VC0_MASK GENMASK(3, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC4_MASK GENMASK(5, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC8_MASK GENMASK(5, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC16_MASK GENMASK(4, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC24_MASK GENMASK(4, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC52_MASK GENMASK(3, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC80_MASK GENMASK(5, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC108_MASK GENMASK(3, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC147_MASK GENMASK(3, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC175_MASK GENMASK(5, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC203_MASK GENMASK(3, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC231_MASK GENMASK(4, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC239_MASK GENMASK(4, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC247_MASK GENMASK(5, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC251_MASK GENMASK(5, 0)
#define DSI_CMD2_BK0_GAMCTRL_VC255_MASK GENMASK(4, 0)
#define DSI_CMD2_BK0_LNESET_LINE_MASK GENMASK(6, 0)
#define DSI_CMD2_BK0_LNESET_LDE_EN BIT(7)
#define DSI_CMD2_BK0_LNESET_LINEDELTA GENMASK(1, 0)
#define DSI_CMD2_BK0_PORCTRL_VBP_MASK GENMASK(7, 0)
#define DSI_CMD2_BK0_PORCTRL_VFP_MASK GENMASK(7, 0)
#define DSI_CMD2_BK0_INVSEL_ONES_MASK GENMASK(5, 4)
#define DSI_CMD2_BK0_INVSEL_NLINV_MASK GENMASK(2, 0)
#define DSI_CMD2_BK0_INVSEL_RTNI_MASK GENMASK(4, 0)
/* Command2, BK1 bytes */
#define DSI_CMD2_BK1_VRHA_MASK GENMASK(7, 0)
#define DSI_CMD2_BK1_VCOM_MASK GENMASK(7, 0)
#define DSI_CMD2_BK1_VGHSS_MASK GENMASK(3, 0)
#define DSI_CMD2_BK1_TESTCMD_VAL BIT(7)
#define DSI_CMD2_BK1_VGLS_ONES BIT(6)
#define DSI_CMD2_BK1_VGLS_MASK GENMASK(3, 0)
#define DSI_CMD2_BK1_PWRCTRL1_AP_MASK GENMASK(7, 6)
#define DSI_CMD2_BK1_PWRCTRL1_APIS_MASK GENMASK(3, 2)
#define DSI_CMD2_BK1_PWRCTRL1_APOS_MASK GENMASK(1, 0)
#define DSI_CMD2_BK1_PWRCTRL2_AVDD_MASK GENMASK(5, 4)
#define DSI_CMD2_BK1_PWRCTRL2_AVCL_MASK GENMASK(1, 0)
#define DSI_CMD2_BK1_SPD1_ONES_MASK GENMASK(6, 4)
#define DSI_CMD2_BK1_SPD1_T2D_MASK GENMASK(3, 0)
#define DSI_CMD2_BK1_SPD2_ONES_MASK GENMASK(6, 4)
#define DSI_CMD2_BK1_SPD2_T3D_MASK GENMASK(3, 0)
#define DSI_CMD2_BK1_MIPISET1_ONES BIT(7)
#define DSI_CMD2_BK1_MIPISET1_EOT_EN BIT(3)
#define CFIELD_PREP(_mask, _val) \
(((typeof(_mask))(_val) << (__builtin_ffsll(_mask) - 1)) & (_mask))
enum op_bias {
OP_BIAS_OFF = 0,
OP_BIAS_MIN,
OP_BIAS_MIDDLE,
OP_BIAS_MAX
};
struct st7701;
struct st7701_panel_desc {
const struct drm_display_mode *mode;
unsigned int lanes;
enum mipi_dsi_pixel_format format;
unsigned int panel_sleep_delay;
/* TFT matrix driver configuration, panel specific. */
const u8 pv_gamma[16]; /* Positive voltage gamma control */
const u8 nv_gamma[16]; /* Negative voltage gamma control */
const u8 nlinv; /* Inversion selection */
const u32 vop_uv; /* Vop in uV */
const u32 vcom_uv; /* Vcom in uV */
const u16 vgh_mv; /* Vgh in mV */
const s16 vgl_mv; /* Vgl in mV */
const u16 avdd_mv; /* Avdd in mV */
const s16 avcl_mv; /* Avcl in mV */
const enum op_bias gamma_op_bias;
const enum op_bias input_op_bias;
const enum op_bias output_op_bias;
const u16 t2d_ns; /* T2D in ns */
const u16 t3d_ns; /* T3D in ns */
const bool eot_en;
/* GIP sequence, fully custom and undocumented. */
void (*gip_sequence)(struct st7701 *st7701);
};
struct st7701 {
struct drm_panel panel;
struct mipi_dsi_device *dsi;
const struct st7701_panel_desc *desc;
struct regulator_bulk_data supplies[2];
struct gpio_desc *reset;
unsigned int sleep_delay;
};
static inline struct st7701 *panel_to_st7701(struct drm_panel *panel)
{
return container_of(panel, struct st7701, panel);
}
static inline int st7701_dsi_write(struct st7701 *st7701, const void *seq,
size_t len)
{
return mipi_dsi_dcs_write_buffer(st7701->dsi, seq, len);
}
#define ST7701_DSI(st7701, seq...) \
{ \
const u8 d[] = { seq }; \
st7701_dsi_write(st7701, d, ARRAY_SIZE(d)); \
}
static u8 st7701_vgls_map(struct st7701 *st7701)
{
const struct st7701_panel_desc *desc = st7701->desc;
struct {
s32 vgl;
u8 val;
} map[16] = {
{ -7060, 0x0 }, { -7470, 0x1 },
{ -7910, 0x2 }, { -8140, 0x3 },
{ -8650, 0x4 }, { -8920, 0x5 },
{ -9210, 0x6 }, { -9510, 0x7 },
{ -9830, 0x8 }, { -10170, 0x9 },
{ -10530, 0xa }, { -10910, 0xb },
{ -11310, 0xc }, { -11730, 0xd },
{ -12200, 0xe }, { -12690, 0xf }
};
int i;
for (i = 0; i < ARRAY_SIZE(map); i++)
if (desc->vgl_mv == map[i].vgl)
return map[i].val;
return 0;
}
static void st7701_switch_cmd_bkx(struct st7701 *st7701, bool cmd2, u8 bkx)
{
u8 val;
if (cmd2)
val = DSI_CMD2 | FIELD_PREP(DSI_CMD2BK_MASK, bkx);
else
val = DSI_CMD1;
ST7701_DSI(st7701, DSI_CMD2BKX_SEL, 0x77, 0x01, 0x00, 0x00, val);
}
static void st7701_init_sequence(struct st7701 *st7701)
{
const struct st7701_panel_desc *desc = st7701->desc;
const struct drm_display_mode *mode = desc->mode;
const u8 linecount8 = mode->vdisplay / 8;
const u8 linecountrem2 = (mode->vdisplay % 8) / 2;
ST7701_DSI(st7701, MIPI_DCS_SOFT_RESET, 0x00);
/* We need to wait 5ms before sending new commands */
msleep(5);
ST7701_DSI(st7701, MIPI_DCS_EXIT_SLEEP_MODE, 0x00);
msleep(st7701->sleep_delay);
/* Command2, BK0 */
st7701_switch_cmd_bkx(st7701, true, 0);
mipi_dsi_dcs_write(st7701->dsi, DSI_CMD2_BK0_PVGAMCTRL,
desc->pv_gamma, ARRAY_SIZE(desc->pv_gamma));
mipi_dsi_dcs_write(st7701->dsi, DSI_CMD2_BK0_NVGAMCTRL,
desc->nv_gamma, ARRAY_SIZE(desc->nv_gamma));
/*
* Vertical line count configuration:
* Line[6:0]: select number of vertical lines of the TFT matrix in
* multiples of 8 lines
* LDE_EN: enable sub-8-line granularity line count
* Line_delta[1:0]: add 0/2/4/6 extra lines to line count selected
* using Line[6:0]
*
* Total number of vertical lines:
* LN = ((Line[6:0] + 1) * 8) + (LDE_EN ? Line_delta[1:0] * 2 : 0)
*/
ST7701_DSI(st7701, DSI_CMD2_BK0_LNESET,
FIELD_PREP(DSI_CMD2_BK0_LNESET_LINE_MASK, linecount8 - 1) |
(linecountrem2 ? DSI_CMD2_BK0_LNESET_LDE_EN : 0),
FIELD_PREP(DSI_CMD2_BK0_LNESET_LINEDELTA, linecountrem2));
ST7701_DSI(st7701, DSI_CMD2_BK0_PORCTRL,
FIELD_PREP(DSI_CMD2_BK0_PORCTRL_VBP_MASK,
mode->vtotal - mode->vsync_end),
FIELD_PREP(DSI_CMD2_BK0_PORCTRL_VFP_MASK,
mode->vsync_start - mode->vdisplay));
/*
* Horizontal pixel count configuration:
* PCLK = 512 + (RTNI[4:0] * 16)
* The PCLK is number of pixel clock per line, which matches
* mode htotal. The minimum is 512 PCLK.
*/
ST7701_DSI(st7701, DSI_CMD2_BK0_INVSEL,
DSI_CMD2_BK0_INVSEL_ONES_MASK |
FIELD_PREP(DSI_CMD2_BK0_INVSEL_NLINV_MASK, desc->nlinv),
FIELD_PREP(DSI_CMD2_BK0_INVSEL_RTNI_MASK,
(clamp((u32)mode->htotal, 512U, 1008U) - 512) / 16));
/* Command2, BK1 */
st7701_switch_cmd_bkx(st7701, true, 1);
/* Vop = 3.5375V + (VRHA[7:0] * 0.0125V) */
ST7701_DSI(st7701, DSI_CMD2_BK1_VRHS,
FIELD_PREP(DSI_CMD2_BK1_VRHA_MASK,
DIV_ROUND_CLOSEST(desc->vop_uv - 3537500, 12500)));
/* Vcom = 0.1V + (VCOM[7:0] * 0.0125V) */
ST7701_DSI(st7701, DSI_CMD2_BK1_VCOM,
FIELD_PREP(DSI_CMD2_BK1_VCOM_MASK,
DIV_ROUND_CLOSEST(desc->vcom_uv - 100000, 12500)));
/* Vgh = 11.5V + (VGHSS[7:0] * 0.5V) */
ST7701_DSI(st7701, DSI_CMD2_BK1_VGHSS,
FIELD_PREP(DSI_CMD2_BK1_VGHSS_MASK,
DIV_ROUND_CLOSEST(clamp(desc->vgh_mv,
(u16)11500,
(u16)17000) - 11500,
500)));
ST7701_DSI(st7701, DSI_CMD2_BK1_TESTCMD, DSI_CMD2_BK1_TESTCMD_VAL);
/* Vgl is non-linear */
ST7701_DSI(st7701, DSI_CMD2_BK1_VGLS,
DSI_CMD2_BK1_VGLS_ONES |
FIELD_PREP(DSI_CMD2_BK1_VGLS_MASK, st7701_vgls_map(st7701)));
ST7701_DSI(st7701, DSI_CMD2_BK1_PWCTLR1,
FIELD_PREP(DSI_CMD2_BK1_PWRCTRL1_AP_MASK,
desc->gamma_op_bias) |
FIELD_PREP(DSI_CMD2_BK1_PWRCTRL1_APIS_MASK,
desc->input_op_bias) |
FIELD_PREP(DSI_CMD2_BK1_PWRCTRL1_APOS_MASK,
desc->output_op_bias));
/* Avdd = 6.2V + (AVDD[1:0] * 0.2V) , Avcl = -4.4V - (AVCL[1:0] * 0.2V) */
ST7701_DSI(st7701, DSI_CMD2_BK1_PWCTLR2,
FIELD_PREP(DSI_CMD2_BK1_PWRCTRL2_AVDD_MASK,
DIV_ROUND_CLOSEST(desc->avdd_mv - 6200, 200)) |
FIELD_PREP(DSI_CMD2_BK1_PWRCTRL2_AVCL_MASK,
DIV_ROUND_CLOSEST(-4400 + desc->avcl_mv, 200)));
/* T2D = 0.2us * T2D[3:0] */
ST7701_DSI(st7701, DSI_CMD2_BK1_SPD1,
DSI_CMD2_BK1_SPD1_ONES_MASK |
FIELD_PREP(DSI_CMD2_BK1_SPD1_T2D_MASK,
DIV_ROUND_CLOSEST(desc->t2d_ns, 200)));
/* T3D = 4us + (0.8us * T3D[3:0]) */
ST7701_DSI(st7701, DSI_CMD2_BK1_SPD2,
DSI_CMD2_BK1_SPD2_ONES_MASK |
FIELD_PREP(DSI_CMD2_BK1_SPD2_T3D_MASK,
DIV_ROUND_CLOSEST(desc->t3d_ns - 4000, 800)));
ST7701_DSI(st7701, DSI_CMD2_BK1_MIPISET1,
DSI_CMD2_BK1_MIPISET1_ONES |
(desc->eot_en ? DSI_CMD2_BK1_MIPISET1_EOT_EN : 0));
}
static void ts8550b_gip_sequence(struct st7701 *st7701)
{
/**
* ST7701_SPEC_V1.2 is unable to provide enough information above this
* specific command sequence, so grab the same from vendor BSP driver.
*/
ST7701_DSI(st7701, 0xE0, 0x00, 0x00, 0x02);
ST7701_DSI(st7701, 0xE1, 0x0B, 0x00, 0x0D, 0x00, 0x0C, 0x00, 0x0E,
0x00, 0x00, 0x44, 0x44);
ST7701_DSI(st7701, 0xE2, 0x33, 0x33, 0x44, 0x44, 0x64, 0x00, 0x66,
0x00, 0x65, 0x00, 0x67, 0x00, 0x00);
ST7701_DSI(st7701, 0xE3, 0x00, 0x00, 0x33, 0x33);
ST7701_DSI(st7701, 0xE4, 0x44, 0x44);
ST7701_DSI(st7701, 0xE5, 0x0C, 0x78, 0x3C, 0xA0, 0x0E, 0x78, 0x3C,
0xA0, 0x10, 0x78, 0x3C, 0xA0, 0x12, 0x78, 0x3C, 0xA0);
ST7701_DSI(st7701, 0xE6, 0x00, 0x00, 0x33, 0x33);
ST7701_DSI(st7701, 0xE7, 0x44, 0x44);
ST7701_DSI(st7701, 0xE8, 0x0D, 0x78, 0x3C, 0xA0, 0x0F, 0x78, 0x3C,
0xA0, 0x11, 0x78, 0x3C, 0xA0, 0x13, 0x78, 0x3C, 0xA0);
ST7701_DSI(st7701, 0xEB, 0x02, 0x02, 0x39, 0x39, 0xEE, 0x44, 0x00);
ST7701_DSI(st7701, 0xEC, 0x00, 0x00);
ST7701_DSI(st7701, 0xED, 0xFF, 0xF1, 0x04, 0x56, 0x72, 0x3F, 0xFF,
0xFF, 0xFF, 0xFF, 0xF3, 0x27, 0x65, 0x40, 0x1F, 0xFF);
}
static void dmt028vghmcmi_1a_gip_sequence(struct st7701 *st7701)
{
ST7701_DSI(st7701, 0xEE, 0x42);
ST7701_DSI(st7701, 0xE0, 0x00, 0x00, 0x02);
ST7701_DSI(st7701, 0xE1,
0x04, 0xA0, 0x06, 0xA0,
0x05, 0xA0, 0x07, 0xA0,
0x00, 0x44, 0x44);
ST7701_DSI(st7701, 0xE2,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00);
ST7701_DSI(st7701, 0xE3,
0x00, 0x00, 0x22, 0x22);
ST7701_DSI(st7701, 0xE4, 0x44, 0x44);
ST7701_DSI(st7701, 0xE5,
0x0C, 0x90, 0xA0, 0xA0,
0x0E, 0x92, 0xA0, 0xA0,
0x08, 0x8C, 0xA0, 0xA0,
0x0A, 0x8E, 0xA0, 0xA0);
ST7701_DSI(st7701, 0xE6,
0x00, 0x00, 0x22, 0x22);
ST7701_DSI(st7701, 0xE7, 0x44, 0x44);
ST7701_DSI(st7701, 0xE8,
0x0D, 0x91, 0xA0, 0xA0,
0x0F, 0x93, 0xA0, 0xA0,
0x09, 0x8D, 0xA0, 0xA0,
0x0B, 0x8F, 0xA0, 0xA0);
ST7701_DSI(st7701, 0xEB,
0x00, 0x00, 0xE4, 0xE4,
0x44, 0x00, 0x00);
ST7701_DSI(st7701, 0xED,
0xFF, 0xF5, 0x47, 0x6F,
0x0B, 0xA1, 0xAB, 0xFF,
0xFF, 0xBA, 0x1A, 0xB0,
0xF6, 0x74, 0x5F, 0xFF);
ST7701_DSI(st7701, 0xEF,
0x08, 0x08, 0x08, 0x40,
0x3F, 0x64);
st7701_switch_cmd_bkx(st7701, false, 0);
st7701_switch_cmd_bkx(st7701, true, 3);
ST7701_DSI(st7701, 0xE6, 0x7C);
ST7701_DSI(st7701, 0xE8, 0x00, 0x0E);
st7701_switch_cmd_bkx(st7701, false, 0);
ST7701_DSI(st7701, 0x11);
msleep(120);
st7701_switch_cmd_bkx(st7701, true, 3);
ST7701_DSI(st7701, 0xE8, 0x00, 0x0C);
msleep(10);
ST7701_DSI(st7701, 0xE8, 0x00, 0x00);
st7701_switch_cmd_bkx(st7701, false, 0);
ST7701_DSI(st7701, 0x11);
msleep(120);
ST7701_DSI(st7701, 0xE8, 0x00, 0x00);
st7701_switch_cmd_bkx(st7701, false, 0);
ST7701_DSI(st7701, 0x3A, 0x70);
}
static int st7701_prepare(struct drm_panel *panel)
{
struct st7701 *st7701 = panel_to_st7701(panel);
int ret;
gpiod_set_value(st7701->reset, 0);
ret = regulator_bulk_enable(ARRAY_SIZE(st7701->supplies),
st7701->supplies);
if (ret < 0)
return ret;
msleep(20);
gpiod_set_value(st7701->reset, 1);
msleep(150);
st7701_init_sequence(st7701);
if (st7701->desc->gip_sequence)
st7701->desc->gip_sequence(st7701);
/* Disable Command2 */
st7701_switch_cmd_bkx(st7701, false, 0);
return 0;
}
static int st7701_enable(struct drm_panel *panel)
{
struct st7701 *st7701 = panel_to_st7701(panel);
ST7701_DSI(st7701, MIPI_DCS_SET_DISPLAY_ON, 0x00);
return 0;
}
static int st7701_disable(struct drm_panel *panel)
{
struct st7701 *st7701 = panel_to_st7701(panel);
ST7701_DSI(st7701, MIPI_DCS_SET_DISPLAY_OFF, 0x00);
return 0;
}
static int st7701_unprepare(struct drm_panel *panel)
{
struct st7701 *st7701 = panel_to_st7701(panel);
ST7701_DSI(st7701, MIPI_DCS_ENTER_SLEEP_MODE, 0x00);
msleep(st7701->sleep_delay);
gpiod_set_value(st7701->reset, 0);
/**
* During the Resetting period, the display will be blanked
* (The display is entering blanking sequence, which maximum
* time is 120 ms, when Reset Starts in Sleep Out –mode. The
* display remains the blank state in Sleep In –mode.) and
* then return to Default condition for Hardware Reset.
*
* So we need wait sleep_delay time to make sure reset completed.
*/
msleep(st7701->sleep_delay);
regulator_bulk_disable(ARRAY_SIZE(st7701->supplies), st7701->supplies);
return 0;
}
static int st7701_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct st7701 *st7701 = panel_to_st7701(panel);
const struct drm_display_mode *desc_mode = st7701->desc->mode;
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, desc_mode);
if (!mode) {
dev_err(&st7701->dsi->dev, "failed to add mode %ux%u@%u\n",
desc_mode->hdisplay, desc_mode->vdisplay,
drm_mode_vrefresh(desc_mode));
return -ENOMEM;
}
drm_mode_set_name(mode);
drm_mode_probed_add(connector, mode);
connector->display_info.width_mm = desc_mode->width_mm;
connector->display_info.height_mm = desc_mode->height_mm;
return 1;
}
static const struct drm_panel_funcs st7701_funcs = {
.disable = st7701_disable,
.unprepare = st7701_unprepare,
.prepare = st7701_prepare,
.enable = st7701_enable,
.get_modes = st7701_get_modes,
};
static const struct drm_display_mode ts8550b_mode = {
.clock = 27500,
.hdisplay = 480,
.hsync_start = 480 + 38,
.hsync_end = 480 + 38 + 12,
.htotal = 480 + 38 + 12 + 12,
.vdisplay = 854,
.vsync_start = 854 + 18,
.vsync_end = 854 + 18 + 8,
.vtotal = 854 + 18 + 8 + 4,
.width_mm = 69,
.height_mm = 139,
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
};
static const struct st7701_panel_desc ts8550b_desc = {
.mode = &ts8550b_mode,
.lanes = 2,
.format = MIPI_DSI_FMT_RGB888,
.panel_sleep_delay = 80, /* panel need extra 80ms for sleep out cmd */
.pv_gamma = {
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC0_MASK, 0),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC4_MASK, 0xe),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC8_MASK, 0x15),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC16_MASK, 0xf),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC24_MASK, 0x11),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC52_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC80_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC108_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC147_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC175_MASK, 0x23),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC203_MASK, 0x4),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC231_MASK, 0x13),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC239_MASK, 0x12),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC247_MASK, 0x2b),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC251_MASK, 0x34),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC255_MASK, 0x1f)
},
.nv_gamma = {
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC0_MASK, 0),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC4_MASK, 0xe),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0x2) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC8_MASK, 0x15),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC16_MASK, 0xf),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC24_MASK, 0x13),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC52_MASK, 0x7),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC80_MASK, 0x9),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC108_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC147_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC175_MASK, 0x22),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC203_MASK, 0x4),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC231_MASK, 0x10),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC239_MASK, 0xe),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC247_MASK, 0x2c),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC251_MASK, 0x34),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC255_MASK, 0x1f)
},
.nlinv = 7,
.vop_uv = 4400000,
.vcom_uv = 337500,
.vgh_mv = 15000,
.vgl_mv = -9510,
.avdd_mv = 6600,
.avcl_mv = -4400,
.gamma_op_bias = OP_BIAS_MAX,
.input_op_bias = OP_BIAS_MIN,
.output_op_bias = OP_BIAS_MIN,
.t2d_ns = 1600,
.t3d_ns = 10400,
.eot_en = true,
.gip_sequence = ts8550b_gip_sequence,
};
static const struct drm_display_mode dmt028vghmcmi_1a_mode = {
.clock = 22325,
.hdisplay = 480,
.hsync_start = 480 + 40,
.hsync_end = 480 + 40 + 4,
.htotal = 480 + 40 + 4 + 20,
.vdisplay = 640,
.vsync_start = 640 + 2,
.vsync_end = 640 + 2 + 40,
.vtotal = 640 + 2 + 40 + 16,
.width_mm = 56,
.height_mm = 78,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
};
static const struct st7701_panel_desc dmt028vghmcmi_1a_desc = {
.mode = &dmt028vghmcmi_1a_mode,
.lanes = 2,
.format = MIPI_DSI_FMT_RGB888,
.panel_sleep_delay = 5, /* panel need extra 5ms for sleep out cmd */
.pv_gamma = {
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC0_MASK, 0),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC4_MASK, 0x10),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC8_MASK, 0x17),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC16_MASK, 0xd),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC24_MASK, 0x11),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC52_MASK, 0x6),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC80_MASK, 0x5),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC108_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC147_MASK, 0x7),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC175_MASK, 0x1f),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC203_MASK, 0x4),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC231_MASK, 0x11),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC239_MASK, 0xe),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC247_MASK, 0x29),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC251_MASK, 0x30),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC255_MASK, 0x1f)
},
.nv_gamma = {
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC0_MASK, 0),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC4_MASK, 0xd),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC8_MASK, 0x14),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC16_MASK, 0xe),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC24_MASK, 0x11),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC52_MASK, 0x6),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC80_MASK, 0x4),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC108_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC147_MASK, 0x8),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC175_MASK, 0x20),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC203_MASK, 0x5),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC231_MASK, 0x13),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC239_MASK, 0x13),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC247_MASK, 0x26),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC251_MASK, 0x30),
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_AJ_MASK, 0) |
CFIELD_PREP(DSI_CMD2_BK0_GAMCTRL_VC255_MASK, 0x1f)
},
.nlinv = 1,
.vop_uv = 4800000,
.vcom_uv = 1650000,
.vgh_mv = 15000,
.vgl_mv = -10170,
.avdd_mv = 6600,
.avcl_mv = -4400,
.gamma_op_bias = OP_BIAS_MIDDLE,
.input_op_bias = OP_BIAS_MIN,
.output_op_bias = OP_BIAS_MIN,
.t2d_ns = 1600,
.t3d_ns = 10400,
.eot_en = true,
.gip_sequence = dmt028vghmcmi_1a_gip_sequence,
};
static int st7701_dsi_probe(struct mipi_dsi_device *dsi)
{
const struct st7701_panel_desc *desc;
struct st7701 *st7701;
int ret;
st7701 = devm_kzalloc(&dsi->dev, sizeof(*st7701), GFP_KERNEL);
if (!st7701)
return -ENOMEM;
desc = of_device_get_match_data(&dsi->dev);
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS;
dsi->format = desc->format;
dsi->lanes = desc->lanes;
st7701->supplies[0].supply = "VCC";
st7701->supplies[1].supply = "IOVCC";
ret = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(st7701->supplies),
st7701->supplies);
if (ret < 0)
return ret;
st7701->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(st7701->reset)) {
dev_err(&dsi->dev, "Couldn't get our reset GPIO\n");
return PTR_ERR(st7701->reset);
}
drm_panel_init(&st7701->panel, &dsi->dev, &st7701_funcs,
DRM_MODE_CONNECTOR_DSI);
/**
* Once sleep out has been issued, ST7701 IC required to wait 120ms
* before initiating new commands.
*
* On top of that some panels might need an extra delay to wait, so
* add panel specific delay for those cases. As now this panel specific
* delay information is referenced from those panel BSP driver, example
* ts8550b and there is no valid documentation for that.
*/
st7701->sleep_delay = 120 + desc->panel_sleep_delay;
ret = drm_panel_of_backlight(&st7701->panel);
if (ret)
return ret;
drm_panel_add(&st7701->panel);
mipi_dsi_set_drvdata(dsi, st7701);
st7701->dsi = dsi;
st7701->desc = desc;
ret = mipi_dsi_attach(dsi);
if (ret)
goto err_attach;
return 0;
err_attach:
drm_panel_remove(&st7701->panel);
return ret;
}
static void st7701_dsi_remove(struct mipi_dsi_device *dsi)
{
struct st7701 *st7701 = mipi_dsi_get_drvdata(dsi);
mipi_dsi_detach(dsi);
drm_panel_remove(&st7701->panel);
}
static const struct of_device_id st7701_of_match[] = {
{ .compatible = "densitron,dmt028vghmcmi-1a", .data = &dmt028vghmcmi_1a_desc },
{ .compatible = "techstar,ts8550b", .data = &ts8550b_desc },
{ }
};
MODULE_DEVICE_TABLE(of, st7701_of_match);
static struct mipi_dsi_driver st7701_dsi_driver = {
.probe = st7701_dsi_probe,
.remove = st7701_dsi_remove,
.driver = {
.name = "st7701",
.of_match_table = st7701_of_match,
},
};
module_mipi_dsi_driver(st7701_dsi_driver);
MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>");
MODULE_DESCRIPTION("Sitronix ST7701 LCD Panel Driver");
MODULE_LICENSE("GPL");
Reference in a new issue View git blame Copy permalink