mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-04 09:59:32 +00:00
![Arnd Bergmann](/assets/img/avatar_default.png)
The three options USB_ARCH_HAS_{EHCI,OHCI,XHCI} are all well beyond their recommended shelf life. They have caused numerous build failures over the years because they are never completely correct, and with the move to splitting out the platform specific back-ends out of the driver, there is no real need for them any more. Also, the use of making USB_ARCH_HAS_HCD depend on it is questionable since one can always enable dummy_hc these days. This patch enables them unconditionally for all platforms and architectures, which means it is now possible to build host controller drivers for machines that are known not to come with this hardware, but that is just how we treat most other drivers. In order to minimise the impact on existing architecture code and defconfig files, all the Kconfig are left present for now. All platforms that currently do 'select USB_ARCH_HAS_*' should subsequently be changed not to select that. All drivers depending on USB_ARCH_HAS_HCD should be changed to depend on USB_SUPPORT instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
141 lines
4.1 KiB
Text
141 lines
4.1 KiB
Text
#
|
|
# USB device configuration
|
|
#
|
|
|
|
# These are unused now, remove them once they are no longer selected
|
|
config USB_ARCH_HAS_OHCI
|
|
bool
|
|
|
|
config USB_ARCH_HAS_EHCI
|
|
bool
|
|
|
|
config USB_ARCH_HAS_XHCI
|
|
bool
|
|
|
|
menuconfig USB_SUPPORT
|
|
bool "USB support"
|
|
depends on HAS_IOMEM
|
|
default y
|
|
---help---
|
|
This option adds core support for Universal Serial Bus (USB).
|
|
You will also need drivers from the following menu to make use of it.
|
|
|
|
if USB_SUPPORT
|
|
|
|
config USB_COMMON
|
|
tristate
|
|
default y
|
|
depends on USB || USB_GADGET
|
|
|
|
config USB_ARCH_HAS_HCD
|
|
def_bool y
|
|
|
|
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
|
|
config USB
|
|
tristate "Support for Host-side USB"
|
|
depends on USB_ARCH_HAS_HCD
|
|
select NLS # for UTF-8 strings
|
|
---help---
|
|
Universal Serial Bus (USB) is a specification for a serial bus
|
|
subsystem which offers higher speeds and more features than the
|
|
traditional PC serial port. The bus supplies power to peripherals
|
|
and allows for hot swapping. Up to 127 USB peripherals can be
|
|
connected to a single USB host in a tree structure.
|
|
|
|
The USB host is the root of the tree, the peripherals are the
|
|
leaves and the inner nodes are special USB devices called hubs.
|
|
Most PCs now have USB host ports, used to connect peripherals
|
|
such as scanners, keyboards, mice, modems, cameras, disks,
|
|
flash memory, network links, and printers to the PC.
|
|
|
|
Say Y here if your computer has a host-side USB port and you want
|
|
to use USB devices. You then need to say Y to at least one of the
|
|
Host Controller Driver (HCD) options below. Choose a USB 1.1
|
|
controller, such as "UHCI HCD support" or "OHCI HCD support",
|
|
and "EHCI HCD (USB 2.0) support" except for older systems that
|
|
do not have USB 2.0 support. It doesn't normally hurt to select
|
|
them all if you are not certain.
|
|
|
|
If your system has a device-side USB port, used in the peripheral
|
|
side of the USB protocol, see the "USB Gadget" framework instead.
|
|
|
|
After choosing your HCD, then select drivers for the USB peripherals
|
|
you'll be using. You may want to check out the information provided
|
|
in <file:Documentation/usb/> and especially the links given in
|
|
<file:Documentation/usb/usb-help.txt>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called usbcore.
|
|
|
|
if USB
|
|
|
|
source "drivers/usb/core/Kconfig"
|
|
|
|
source "drivers/usb/mon/Kconfig"
|
|
|
|
source "drivers/usb/wusbcore/Kconfig"
|
|
|
|
source "drivers/usb/host/Kconfig"
|
|
|
|
source "drivers/usb/musb/Kconfig"
|
|
|
|
source "drivers/usb/renesas_usbhs/Kconfig"
|
|
|
|
source "drivers/usb/class/Kconfig"
|
|
|
|
source "drivers/usb/storage/Kconfig"
|
|
|
|
source "drivers/usb/image/Kconfig"
|
|
|
|
endif
|
|
|
|
source "drivers/usb/dwc3/Kconfig"
|
|
|
|
source "drivers/usb/chipidea/Kconfig"
|
|
|
|
comment "USB port drivers"
|
|
|
|
if USB
|
|
|
|
config USB_USS720
|
|
tristate "USS720 parport driver"
|
|
depends on PARPORT
|
|
select PARPORT_NOT_PC
|
|
---help---
|
|
This driver is for USB parallel port adapters that use the Lucent
|
|
Technologies USS-720 chip. These cables are plugged into your USB
|
|
port and provide USB compatibility to peripherals designed with
|
|
parallel port interfaces.
|
|
|
|
The chip has two modes: automatic mode and manual mode. In automatic
|
|
mode, it looks to the computer like a standard USB printer. Only
|
|
printers may be connected to the USS-720 in this mode. The generic
|
|
USB printer driver ("USB Printer support", above) may be used in
|
|
that mode, and you can say N here if you want to use the chip only
|
|
in this mode.
|
|
|
|
Manual mode is not limited to printers, any parallel port
|
|
device should work. This driver utilizes manual mode.
|
|
Note however that some operations are three orders of magnitude
|
|
slower than on a PCI/ISA Parallel Port, so timing critical
|
|
applications might not work.
|
|
|
|
Say Y here if you own an USS-720 USB->Parport cable and intend to
|
|
connect anything other than a printer to it.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called uss720.
|
|
|
|
source "drivers/usb/serial/Kconfig"
|
|
|
|
source "drivers/usb/misc/Kconfig"
|
|
|
|
source "drivers/usb/atm/Kconfig"
|
|
|
|
endif # USB
|
|
|
|
source "drivers/usb/phy/Kconfig"
|
|
|
|
source "drivers/usb/gadget/Kconfig"
|
|
|
|
endif # USB_SUPPORT
|