mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 13:55:32 +00:00
![kishore kadiyala](/assets/img/avatar_default.png)
In OMAP4, MMC1 PBIAS and its associated IO is software-controlled by CONTROL_PBIAS and CONTROL_MMC1 registers. This patch adds PBIAS configuration for MMC1 Controller during power-ON and power-OFF of regulator. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
360 lines
9.7 KiB
C
360 lines
9.7 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/hsmmc.c
|
|
*
|
|
* Copyright (C) 2007-2008 Texas Instruments
|
|
* Copyright (C) 2008 Nokia Corporation
|
|
* Author: Texas Instruments
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/delay.h>
|
|
#include <mach/hardware.h>
|
|
#include <plat/control.h>
|
|
#include <plat/mmc.h>
|
|
#include <plat/omap-pm.h>
|
|
|
|
#include "hsmmc.h"
|
|
|
|
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
|
|
|
|
static u16 control_pbias_offset;
|
|
static u16 control_devconf1_offset;
|
|
static u16 control_mmc1;
|
|
|
|
#define HSMMC_NAME_LEN 9
|
|
|
|
static struct hsmmc_controller {
|
|
char name[HSMMC_NAME_LEN + 1];
|
|
} hsmmc[OMAP34XX_NR_MMC];
|
|
|
|
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
|
|
|
|
static int hsmmc_get_context_loss(struct device *dev)
|
|
{
|
|
return omap_pm_get_dev_context_loss_count(dev);
|
|
}
|
|
|
|
#else
|
|
#define hsmmc_get_context_loss NULL
|
|
#endif
|
|
|
|
static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
|
|
int power_on, int vdd)
|
|
{
|
|
u32 reg, prog_io;
|
|
struct omap_mmc_platform_data *mmc = dev->platform_data;
|
|
|
|
if (mmc->slots[0].remux)
|
|
mmc->slots[0].remux(dev, slot, power_on);
|
|
|
|
/*
|
|
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
|
|
* card with Vcc regulator (from twl4030 or whatever). OMAP has both
|
|
* 1.8V and 3.0V modes, controlled by the PBIAS register.
|
|
*
|
|
* In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
|
|
* is most naturally TWL VSIM; those pins also use PBIAS.
|
|
*
|
|
* FIXME handle VMMC1A as needed ...
|
|
*/
|
|
if (power_on) {
|
|
if (cpu_is_omap2430()) {
|
|
reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
|
|
if ((1 << vdd) >= MMC_VDD_30_31)
|
|
reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
|
|
else
|
|
reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
|
|
omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
|
|
}
|
|
|
|
if (mmc->slots[0].internal_clock) {
|
|
reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
|
|
reg |= OMAP2_MMCSDIO1ADPCLKISEL;
|
|
omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
|
|
}
|
|
|
|
reg = omap_ctrl_readl(control_pbias_offset);
|
|
if (cpu_is_omap3630()) {
|
|
/* Set MMC I/O to 52Mhz */
|
|
prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
|
|
prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
|
|
omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
|
|
} else {
|
|
reg |= OMAP2_PBIASSPEEDCTRL0;
|
|
}
|
|
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
|
|
omap_ctrl_writel(reg, control_pbias_offset);
|
|
} else {
|
|
reg = omap_ctrl_readl(control_pbias_offset);
|
|
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
|
|
omap_ctrl_writel(reg, control_pbias_offset);
|
|
}
|
|
}
|
|
|
|
static void omap_hsmmc1_after_set_reg(struct device *dev, int slot,
|
|
int power_on, int vdd)
|
|
{
|
|
u32 reg;
|
|
|
|
/* 100ms delay required for PBIAS configuration */
|
|
msleep(100);
|
|
|
|
if (power_on) {
|
|
reg = omap_ctrl_readl(control_pbias_offset);
|
|
reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
|
|
if ((1 << vdd) <= MMC_VDD_165_195)
|
|
reg &= ~OMAP2_PBIASLITEVMODE0;
|
|
else
|
|
reg |= OMAP2_PBIASLITEVMODE0;
|
|
omap_ctrl_writel(reg, control_pbias_offset);
|
|
} else {
|
|
reg = omap_ctrl_readl(control_pbias_offset);
|
|
reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
|
|
OMAP2_PBIASLITEVMODE0);
|
|
omap_ctrl_writel(reg, control_pbias_offset);
|
|
}
|
|
}
|
|
|
|
static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot,
|
|
int power_on, int vdd)
|
|
{
|
|
u32 reg;
|
|
|
|
/*
|
|
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
|
|
* card with Vcc regulator (from twl4030 or whatever). OMAP has both
|
|
* 1.8V and 3.0V modes, controlled by the PBIAS register.
|
|
*
|
|
* In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
|
|
* is most naturally TWL VSIM; those pins also use PBIAS.
|
|
*
|
|
* FIXME handle VMMC1A as needed ...
|
|
*/
|
|
reg = omap_ctrl_readl(control_pbias_offset);
|
|
reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ |
|
|
OMAP4_USBC1_ICUSB_PWRDNZ);
|
|
omap_ctrl_writel(reg, control_pbias_offset);
|
|
}
|
|
|
|
static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
|
|
int power_on, int vdd)
|
|
{
|
|
u32 reg;
|
|
|
|
if (power_on) {
|
|
reg = omap_ctrl_readl(control_pbias_offset);
|
|
reg |= OMAP4_MMC1_PBIASLITE_PWRDNZ;
|
|
if ((1 << vdd) <= MMC_VDD_165_195)
|
|
reg &= ~OMAP4_MMC1_PBIASLITE_VMODE;
|
|
else
|
|
reg |= OMAP4_MMC1_PBIASLITE_VMODE;
|
|
reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ |
|
|
OMAP4_USBC1_ICUSB_PWRDNZ);
|
|
omap_ctrl_writel(reg, control_pbias_offset);
|
|
/* 4 microsec delay for comparator to generate an error*/
|
|
udelay(4);
|
|
reg = omap_ctrl_readl(control_pbias_offset);
|
|
if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR) {
|
|
pr_err("Pbias Voltage is not same as LDO\n");
|
|
/* Caution : On VMODE_ERROR Power Down MMC IO */
|
|
reg &= ~(OMAP4_MMC1_PWRDNZ | OMAP4_USBC1_ICUSB_PWRDNZ);
|
|
omap_ctrl_writel(reg, control_pbias_offset);
|
|
}
|
|
} else {
|
|
reg = omap_ctrl_readl(control_pbias_offset);
|
|
reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ |
|
|
OMAP4_MMC1_PBIASLITE_VMODE | OMAP4_MMC1_PWRDNZ |
|
|
OMAP4_USBC1_ICUSB_PWRDNZ);
|
|
omap_ctrl_writel(reg, control_pbias_offset);
|
|
}
|
|
}
|
|
|
|
static void hsmmc23_before_set_reg(struct device *dev, int slot,
|
|
int power_on, int vdd)
|
|
{
|
|
struct omap_mmc_platform_data *mmc = dev->platform_data;
|
|
|
|
if (mmc->slots[0].remux)
|
|
mmc->slots[0].remux(dev, slot, power_on);
|
|
|
|
if (power_on) {
|
|
/* Only MMC2 supports a CLKIN */
|
|
if (mmc->slots[0].internal_clock) {
|
|
u32 reg;
|
|
|
|
reg = omap_ctrl_readl(control_devconf1_offset);
|
|
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
|
|
omap_ctrl_writel(reg, control_devconf1_offset);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
|
|
int vdd)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
|
|
|
|
void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
|
|
{
|
|
struct omap2_hsmmc_info *c;
|
|
int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
|
|
int i;
|
|
u32 reg;
|
|
|
|
if (!cpu_is_omap44xx()) {
|
|
if (cpu_is_omap2430()) {
|
|
control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
|
|
control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
|
|
} else {
|
|
control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
|
|
control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
|
|
}
|
|
} else {
|
|
control_pbias_offset = OMAP44XX_CONTROL_PBIAS_LITE;
|
|
control_mmc1 = OMAP44XX_CONTROL_MMC1;
|
|
reg = omap_ctrl_readl(control_mmc1);
|
|
reg |= (OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0 |
|
|
OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1);
|
|
reg &= ~(OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2 |
|
|
OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3);
|
|
reg |= (OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL |
|
|
OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL |
|
|
OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL);
|
|
omap_ctrl_writel(reg, control_mmc1);
|
|
}
|
|
|
|
for (c = controllers; c->mmc; c++) {
|
|
struct hsmmc_controller *hc = hsmmc + c->mmc - 1;
|
|
struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
|
|
|
|
if (!c->mmc || c->mmc > nr_hsmmc) {
|
|
pr_debug("MMC%d: no such controller\n", c->mmc);
|
|
continue;
|
|
}
|
|
if (mmc) {
|
|
pr_debug("MMC%d: already configured\n", c->mmc);
|
|
continue;
|
|
}
|
|
|
|
mmc = kzalloc(sizeof(struct omap_mmc_platform_data),
|
|
GFP_KERNEL);
|
|
if (!mmc) {
|
|
pr_err("Cannot allocate memory for mmc device!\n");
|
|
goto done;
|
|
}
|
|
|
|
if (c->name)
|
|
strncpy(hc->name, c->name, HSMMC_NAME_LEN);
|
|
else
|
|
snprintf(hc->name, ARRAY_SIZE(hc->name),
|
|
"mmc%islot%i", c->mmc, 1);
|
|
mmc->slots[0].name = hc->name;
|
|
mmc->nr_slots = 1;
|
|
mmc->slots[0].wires = c->wires;
|
|
mmc->slots[0].internal_clock = !c->ext_clock;
|
|
mmc->dma_mask = 0xffffffff;
|
|
|
|
mmc->get_context_loss_count = hsmmc_get_context_loss;
|
|
|
|
mmc->slots[0].switch_pin = c->gpio_cd;
|
|
mmc->slots[0].gpio_wp = c->gpio_wp;
|
|
|
|
mmc->slots[0].remux = c->remux;
|
|
|
|
if (c->cover_only)
|
|
mmc->slots[0].cover = 1;
|
|
|
|
if (c->nonremovable)
|
|
mmc->slots[0].nonremovable = 1;
|
|
|
|
if (c->power_saving)
|
|
mmc->slots[0].power_saving = 1;
|
|
|
|
if (c->no_off)
|
|
mmc->slots[0].no_off = 1;
|
|
|
|
if (c->vcc_aux_disable_is_sleep)
|
|
mmc->slots[0].vcc_aux_disable_is_sleep = 1;
|
|
|
|
/* NOTE: MMC slots should have a Vcc regulator set up.
|
|
* This may be from a TWL4030-family chip, another
|
|
* controllable regulator, or a fixed supply.
|
|
*
|
|
* temporary HACK: ocr_mask instead of fixed supply
|
|
*/
|
|
mmc->slots[0].ocr_mask = c->ocr_mask;
|
|
|
|
if (cpu_is_omap3517() || cpu_is_omap3505())
|
|
mmc->slots[0].set_power = nop_mmc_set_power;
|
|
else
|
|
mmc->slots[0].features |= HSMMC_HAS_PBIAS;
|
|
|
|
switch (c->mmc) {
|
|
case 1:
|
|
if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
|
|
/* on-chip level shifting via PBIAS0/PBIAS1 */
|
|
if (cpu_is_omap44xx()) {
|
|
mmc->slots[0].before_set_reg =
|
|
omap4_hsmmc1_before_set_reg;
|
|
mmc->slots[0].after_set_reg =
|
|
omap4_hsmmc1_after_set_reg;
|
|
} else {
|
|
mmc->slots[0].before_set_reg =
|
|
omap_hsmmc1_before_set_reg;
|
|
mmc->slots[0].after_set_reg =
|
|
omap_hsmmc1_after_set_reg;
|
|
}
|
|
}
|
|
|
|
/* Omap3630 HSMMC1 supports only 4-bit */
|
|
if (cpu_is_omap3630() && c->wires > 4) {
|
|
c->wires = 4;
|
|
mmc->slots[0].wires = c->wires;
|
|
}
|
|
break;
|
|
case 2:
|
|
if (c->ext_clock)
|
|
c->transceiver = 1;
|
|
if (c->transceiver && c->wires > 4)
|
|
c->wires = 4;
|
|
/* FALLTHROUGH */
|
|
case 3:
|
|
if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
|
|
/* off-chip level shifting, or none */
|
|
mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
|
|
mmc->slots[0].after_set_reg = NULL;
|
|
}
|
|
break;
|
|
default:
|
|
pr_err("MMC%d configuration not supported!\n", c->mmc);
|
|
kfree(mmc);
|
|
continue;
|
|
}
|
|
hsmmc_data[c->mmc - 1] = mmc;
|
|
}
|
|
|
|
omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC);
|
|
|
|
/* pass the device nodes back to board setup code */
|
|
for (c = controllers; c->mmc; c++) {
|
|
struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
|
|
|
|
if (!c->mmc || c->mmc > nr_hsmmc)
|
|
continue;
|
|
c->dev = mmc->dev;
|
|
}
|
|
|
|
done:
|
|
for (i = 0; i < nr_hsmmc; i++)
|
|
kfree(hsmmc_data[i]);
|
|
}
|
|
|
|
#endif
|