mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 19:29:37 +00:00
![Roger Quadros](/assets/img/avatar_default.png)
If bootloader has set a wrong DPLL then we must trash those values and re-program it anyways. This fixes USB3 devices not being enumerated on beagle-x15 if usb was started in u-boot. We don't re-program SATA DPLL if it is locked as it was causing SATA failures if device was hotpluged after boot. Reported-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
703 lines
18 KiB
C
703 lines
18 KiB
C
/*
|
|
* phy-ti-pipe3 - PIPE3 PHY driver.
|
|
*
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* Author: Kishon Vijay Abraham I <kishon@ti.com>
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/of.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/phy/omap_control_phy.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define PLL_STATUS 0x00000004
|
|
#define PLL_GO 0x00000008
|
|
#define PLL_CONFIGURATION1 0x0000000C
|
|
#define PLL_CONFIGURATION2 0x00000010
|
|
#define PLL_CONFIGURATION3 0x00000014
|
|
#define PLL_CONFIGURATION4 0x00000020
|
|
|
|
#define PLL_REGM_MASK 0x001FFE00
|
|
#define PLL_REGM_SHIFT 0x9
|
|
#define PLL_REGM_F_MASK 0x0003FFFF
|
|
#define PLL_REGM_F_SHIFT 0x0
|
|
#define PLL_REGN_MASK 0x000001FE
|
|
#define PLL_REGN_SHIFT 0x1
|
|
#define PLL_SELFREQDCO_MASK 0x0000000E
|
|
#define PLL_SELFREQDCO_SHIFT 0x1
|
|
#define PLL_SD_MASK 0x0003FC00
|
|
#define PLL_SD_SHIFT 10
|
|
#define SET_PLL_GO 0x1
|
|
#define PLL_LDOPWDN BIT(15)
|
|
#define PLL_TICOPWDN BIT(16)
|
|
#define PLL_LOCK 0x2
|
|
#define PLL_IDLE 0x1
|
|
|
|
#define SATA_PLL_SOFT_RESET BIT(18)
|
|
|
|
#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
|
|
#define PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 14
|
|
|
|
#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
|
|
#define PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 22
|
|
|
|
#define PIPE3_PHY_TX_RX_POWERON 0x3
|
|
#define PIPE3_PHY_TX_RX_POWEROFF 0x0
|
|
|
|
#define PCIE_PCS_MASK 0xFF0000
|
|
#define PCIE_PCS_DELAY_COUNT_SHIFT 0x10
|
|
|
|
/*
|
|
* This is an Empirical value that works, need to confirm the actual
|
|
* value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
|
|
* to be correctly reflected in the PIPE3PHY_PLL_STATUS register.
|
|
*/
|
|
#define PLL_IDLE_TIME 100 /* in milliseconds */
|
|
#define PLL_LOCK_TIME 100 /* in milliseconds */
|
|
|
|
struct pipe3_dpll_params {
|
|
u16 m;
|
|
u8 n;
|
|
u8 freq:3;
|
|
u8 sd;
|
|
u32 mf;
|
|
};
|
|
|
|
struct pipe3_dpll_map {
|
|
unsigned long rate;
|
|
struct pipe3_dpll_params params;
|
|
};
|
|
|
|
struct ti_pipe3 {
|
|
void __iomem *pll_ctrl_base;
|
|
struct device *dev;
|
|
struct device *control_dev;
|
|
struct clk *wkupclk;
|
|
struct clk *sys_clk;
|
|
struct clk *refclk;
|
|
struct clk *div_clk;
|
|
struct pipe3_dpll_map *dpll_map;
|
|
struct regmap *phy_power_syscon; /* ctrl. reg. acces */
|
|
struct regmap *pcs_syscon; /* ctrl. reg. acces */
|
|
struct regmap *dpll_reset_syscon; /* ctrl. reg. acces */
|
|
unsigned int dpll_reset_reg; /* reg. index within syscon */
|
|
unsigned int power_reg; /* power reg. index within syscon */
|
|
unsigned int pcie_pcs_reg; /* pcs reg. index in syscon */
|
|
bool sata_refclk_enabled;
|
|
};
|
|
|
|
static struct pipe3_dpll_map dpll_map_usb[] = {
|
|
{12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */
|
|
{16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */
|
|
{19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */
|
|
{20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */
|
|
{26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */
|
|
{38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */
|
|
{ }, /* Terminator */
|
|
};
|
|
|
|
static struct pipe3_dpll_map dpll_map_sata[] = {
|
|
{12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */
|
|
{16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */
|
|
{19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */
|
|
{20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */
|
|
{26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */
|
|
{38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */
|
|
{ }, /* Terminator */
|
|
};
|
|
|
|
static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset)
|
|
{
|
|
return __raw_readl(addr + offset);
|
|
}
|
|
|
|
static inline void ti_pipe3_writel(void __iomem *addr, unsigned offset,
|
|
u32 data)
|
|
{
|
|
__raw_writel(data, addr + offset);
|
|
}
|
|
|
|
static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy)
|
|
{
|
|
unsigned long rate;
|
|
struct pipe3_dpll_map *dpll_map = phy->dpll_map;
|
|
|
|
rate = clk_get_rate(phy->sys_clk);
|
|
|
|
for (; dpll_map->rate; dpll_map++) {
|
|
if (rate == dpll_map->rate)
|
|
return &dpll_map->params;
|
|
}
|
|
|
|
dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy);
|
|
static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy);
|
|
|
|
static int ti_pipe3_power_off(struct phy *x)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
struct ti_pipe3 *phy = phy_get_drvdata(x);
|
|
|
|
if (!phy->phy_power_syscon) {
|
|
omap_control_phy_power(phy->control_dev, 0);
|
|
return 0;
|
|
}
|
|
|
|
val = PIPE3_PHY_TX_RX_POWEROFF << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
|
|
|
|
ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
|
|
PIPE3_PHY_PWRCTL_CLK_CMD_MASK, val);
|
|
return ret;
|
|
}
|
|
|
|
static int ti_pipe3_power_on(struct phy *x)
|
|
{
|
|
u32 val;
|
|
u32 mask;
|
|
int ret;
|
|
unsigned long rate;
|
|
struct ti_pipe3 *phy = phy_get_drvdata(x);
|
|
|
|
if (!phy->phy_power_syscon) {
|
|
omap_control_phy_power(phy->control_dev, 1);
|
|
return 0;
|
|
}
|
|
|
|
rate = clk_get_rate(phy->sys_clk);
|
|
if (!rate) {
|
|
dev_err(phy->dev, "Invalid clock rate\n");
|
|
return -EINVAL;
|
|
}
|
|
rate = rate / 1000000;
|
|
mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
|
|
OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK;
|
|
val = PIPE3_PHY_TX_RX_POWERON << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
|
|
val |= rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
|
|
|
|
ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
|
|
mask, val);
|
|
return ret;
|
|
}
|
|
|
|
static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy)
|
|
{
|
|
u32 val;
|
|
unsigned long timeout;
|
|
|
|
timeout = jiffies + msecs_to_jiffies(PLL_LOCK_TIME);
|
|
do {
|
|
cpu_relax();
|
|
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
|
|
if (val & PLL_LOCK)
|
|
return 0;
|
|
} while (!time_after(jiffies, timeout));
|
|
|
|
dev_err(phy->dev, "DPLL failed to lock\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
static int ti_pipe3_dpll_program(struct ti_pipe3 *phy)
|
|
{
|
|
u32 val;
|
|
struct pipe3_dpll_params *dpll_params;
|
|
|
|
dpll_params = ti_pipe3_get_dpll_params(phy);
|
|
if (!dpll_params)
|
|
return -EINVAL;
|
|
|
|
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
|
|
val &= ~PLL_REGN_MASK;
|
|
val |= dpll_params->n << PLL_REGN_SHIFT;
|
|
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
|
|
|
|
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
|
|
val &= ~PLL_SELFREQDCO_MASK;
|
|
val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
|
|
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
|
|
|
|
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
|
|
val &= ~PLL_REGM_MASK;
|
|
val |= dpll_params->m << PLL_REGM_SHIFT;
|
|
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
|
|
|
|
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
|
|
val &= ~PLL_REGM_F_MASK;
|
|
val |= dpll_params->mf << PLL_REGM_F_SHIFT;
|
|
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
|
|
|
|
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
|
|
val &= ~PLL_SD_MASK;
|
|
val |= dpll_params->sd << PLL_SD_SHIFT;
|
|
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
|
|
|
|
ti_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
|
|
|
|
return ti_pipe3_dpll_wait_lock(phy);
|
|
}
|
|
|
|
static int ti_pipe3_init(struct phy *x)
|
|
{
|
|
struct ti_pipe3 *phy = phy_get_drvdata(x);
|
|
u32 val;
|
|
int ret = 0;
|
|
|
|
ti_pipe3_enable_clocks(phy);
|
|
/*
|
|
* Set pcie_pcs register to 0x96 for proper functioning of phy
|
|
* as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
|
|
* 18-1804.
|
|
*/
|
|
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
|
|
if (!phy->pcs_syscon) {
|
|
omap_control_pcie_pcs(phy->control_dev, 0x96);
|
|
return 0;
|
|
}
|
|
|
|
val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT;
|
|
ret = regmap_update_bits(phy->pcs_syscon, phy->pcie_pcs_reg,
|
|
PCIE_PCS_MASK, val);
|
|
return ret;
|
|
}
|
|
|
|
/* Bring it out of IDLE if it is IDLE */
|
|
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
|
|
if (val & PLL_IDLE) {
|
|
val &= ~PLL_IDLE;
|
|
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
|
|
ret = ti_pipe3_dpll_wait_lock(phy);
|
|
}
|
|
|
|
/* SATA has issues if re-programmed when locked */
|
|
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
|
|
if ((val & PLL_LOCK) && of_device_is_compatible(phy->dev->of_node,
|
|
"ti,phy-pipe3-sata"))
|
|
return ret;
|
|
|
|
/* Program the DPLL */
|
|
ret = ti_pipe3_dpll_program(phy);
|
|
if (ret) {
|
|
ti_pipe3_disable_clocks(phy);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ti_pipe3_exit(struct phy *x)
|
|
{
|
|
struct ti_pipe3 *phy = phy_get_drvdata(x);
|
|
u32 val;
|
|
unsigned long timeout;
|
|
|
|
/* If dpll_reset_syscon is not present we wont power down SATA DPLL
|
|
* due to Errata i783
|
|
*/
|
|
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") &&
|
|
!phy->dpll_reset_syscon)
|
|
return 0;
|
|
|
|
/* PCIe doesn't have internal DPLL */
|
|
if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
|
|
/* Put DPLL in IDLE mode */
|
|
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
|
|
val |= PLL_IDLE;
|
|
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
|
|
|
|
/* wait for LDO and Oscillator to power down */
|
|
timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME);
|
|
do {
|
|
cpu_relax();
|
|
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
|
|
if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
|
|
break;
|
|
} while (!time_after(jiffies, timeout));
|
|
|
|
if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
|
|
dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n",
|
|
val);
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
|
|
/* i783: SATA needs control bit toggle after PLL unlock */
|
|
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata")) {
|
|
regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
|
|
SATA_PLL_SOFT_RESET, SATA_PLL_SOFT_RESET);
|
|
regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
|
|
SATA_PLL_SOFT_RESET, 0);
|
|
}
|
|
|
|
ti_pipe3_disable_clocks(phy);
|
|
|
|
return 0;
|
|
}
|
|
static const struct phy_ops ops = {
|
|
.init = ti_pipe3_init,
|
|
.exit = ti_pipe3_exit,
|
|
.power_on = ti_pipe3_power_on,
|
|
.power_off = ti_pipe3_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct of_device_id ti_pipe3_id_table[];
|
|
|
|
static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
|
|
{
|
|
struct clk *clk;
|
|
struct device *dev = phy->dev;
|
|
struct device_node *node = dev->of_node;
|
|
|
|
phy->refclk = devm_clk_get(dev, "refclk");
|
|
if (IS_ERR(phy->refclk)) {
|
|
dev_err(dev, "unable to get refclk\n");
|
|
/* older DTBs have missing refclk in SATA PHY
|
|
* so don't bail out in case of SATA PHY.
|
|
*/
|
|
if (!of_device_is_compatible(node, "ti,phy-pipe3-sata"))
|
|
return PTR_ERR(phy->refclk);
|
|
}
|
|
|
|
if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
|
|
phy->wkupclk = devm_clk_get(dev, "wkupclk");
|
|
if (IS_ERR(phy->wkupclk)) {
|
|
dev_err(dev, "unable to get wkupclk\n");
|
|
return PTR_ERR(phy->wkupclk);
|
|
}
|
|
} else {
|
|
phy->wkupclk = ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie") ||
|
|
phy->phy_power_syscon) {
|
|
phy->sys_clk = devm_clk_get(dev, "sysclk");
|
|
if (IS_ERR(phy->sys_clk)) {
|
|
dev_err(dev, "unable to get sysclk\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
|
|
clk = devm_clk_get(dev, "dpll_ref");
|
|
if (IS_ERR(clk)) {
|
|
dev_err(dev, "unable to get dpll ref clk\n");
|
|
return PTR_ERR(clk);
|
|
}
|
|
clk_set_rate(clk, 1500000000);
|
|
|
|
clk = devm_clk_get(dev, "dpll_ref_m2");
|
|
if (IS_ERR(clk)) {
|
|
dev_err(dev, "unable to get dpll ref m2 clk\n");
|
|
return PTR_ERR(clk);
|
|
}
|
|
clk_set_rate(clk, 100000000);
|
|
|
|
clk = devm_clk_get(dev, "phy-div");
|
|
if (IS_ERR(clk)) {
|
|
dev_err(dev, "unable to get phy-div clk\n");
|
|
return PTR_ERR(clk);
|
|
}
|
|
clk_set_rate(clk, 100000000);
|
|
|
|
phy->div_clk = devm_clk_get(dev, "div-clk");
|
|
if (IS_ERR(phy->div_clk)) {
|
|
dev_err(dev, "unable to get div-clk\n");
|
|
return PTR_ERR(phy->div_clk);
|
|
}
|
|
} else {
|
|
phy->div_clk = ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
|
|
{
|
|
struct device *dev = phy->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct device_node *control_node;
|
|
struct platform_device *control_pdev;
|
|
|
|
phy->phy_power_syscon = syscon_regmap_lookup_by_phandle(node,
|
|
"syscon-phy-power");
|
|
if (IS_ERR(phy->phy_power_syscon)) {
|
|
dev_dbg(dev,
|
|
"can't get syscon-phy-power, using control device\n");
|
|
phy->phy_power_syscon = NULL;
|
|
} else {
|
|
if (of_property_read_u32_index(node,
|
|
"syscon-phy-power", 1,
|
|
&phy->power_reg)) {
|
|
dev_err(dev, "couldn't get power reg. offset\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (!phy->phy_power_syscon) {
|
|
control_node = of_parse_phandle(node, "ctrl-module", 0);
|
|
if (!control_node) {
|
|
dev_err(dev, "Failed to get control device phandle\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
control_pdev = of_find_device_by_node(control_node);
|
|
if (!control_pdev) {
|
|
dev_err(dev, "Failed to get control device\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
phy->control_dev = &control_pdev->dev;
|
|
}
|
|
|
|
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
|
|
phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node,
|
|
"syscon-pcs");
|
|
if (IS_ERR(phy->pcs_syscon)) {
|
|
dev_dbg(dev,
|
|
"can't get syscon-pcs, using omap control\n");
|
|
phy->pcs_syscon = NULL;
|
|
} else {
|
|
if (of_property_read_u32_index(node,
|
|
"syscon-pcs", 1,
|
|
&phy->pcie_pcs_reg)) {
|
|
dev_err(dev,
|
|
"couldn't get pcie pcs reg. offset\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
|
|
phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
|
|
"syscon-pllreset");
|
|
if (IS_ERR(phy->dpll_reset_syscon)) {
|
|
dev_info(dev,
|
|
"can't get syscon-pllreset, sata dpll won't idle\n");
|
|
phy->dpll_reset_syscon = NULL;
|
|
} else {
|
|
if (of_property_read_u32_index(node,
|
|
"syscon-pllreset", 1,
|
|
&phy->dpll_reset_reg)) {
|
|
dev_err(dev,
|
|
"couldn't get pllreset reg. offset\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy)
|
|
{
|
|
struct resource *res;
|
|
const struct of_device_id *match;
|
|
struct device *dev = phy->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie"))
|
|
return 0;
|
|
|
|
match = of_match_device(ti_pipe3_id_table, dev);
|
|
if (!match)
|
|
return -EINVAL;
|
|
|
|
phy->dpll_map = (struct pipe3_dpll_map *)match->data;
|
|
if (!phy->dpll_map) {
|
|
dev_err(dev, "no DPLL data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
|
"pll_ctrl");
|
|
phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(phy->pll_ctrl_base))
|
|
return PTR_ERR(phy->pll_ctrl_base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ti_pipe3_probe(struct platform_device *pdev)
|
|
{
|
|
struct ti_pipe3 *phy;
|
|
struct phy *generic_phy;
|
|
struct phy_provider *phy_provider;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct device *dev = &pdev->dev;
|
|
int ret;
|
|
|
|
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
|
if (!phy)
|
|
return -ENOMEM;
|
|
|
|
phy->dev = dev;
|
|
|
|
ret = ti_pipe3_get_pll_base(phy);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ti_pipe3_get_sysctrl(phy);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ti_pipe3_get_clk(phy);
|
|
if (ret)
|
|
return ret;
|
|
|
|
platform_set_drvdata(pdev, phy);
|
|
pm_runtime_enable(dev);
|
|
|
|
/*
|
|
* Prevent auto-disable of refclk for SATA PHY due to Errata i783
|
|
*/
|
|
if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
|
|
if (!IS_ERR(phy->refclk)) {
|
|
clk_prepare_enable(phy->refclk);
|
|
phy->sata_refclk_enabled = true;
|
|
}
|
|
}
|
|
|
|
generic_phy = devm_phy_create(dev, NULL, &ops);
|
|
if (IS_ERR(generic_phy))
|
|
return PTR_ERR(generic_phy);
|
|
|
|
phy_set_drvdata(generic_phy, phy);
|
|
|
|
ti_pipe3_power_off(generic_phy);
|
|
|
|
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
if (IS_ERR(phy_provider))
|
|
return PTR_ERR(phy_provider);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ti_pipe3_remove(struct platform_device *pdev)
|
|
{
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (!IS_ERR(phy->refclk)) {
|
|
ret = clk_prepare_enable(phy->refclk);
|
|
if (ret) {
|
|
dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (!IS_ERR(phy->wkupclk)) {
|
|
ret = clk_prepare_enable(phy->wkupclk);
|
|
if (ret) {
|
|
dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
|
|
goto disable_refclk;
|
|
}
|
|
}
|
|
|
|
if (!IS_ERR(phy->div_clk)) {
|
|
ret = clk_prepare_enable(phy->div_clk);
|
|
if (ret) {
|
|
dev_err(phy->dev, "Failed to enable div_clk %d\n", ret);
|
|
goto disable_wkupclk;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
disable_wkupclk:
|
|
if (!IS_ERR(phy->wkupclk))
|
|
clk_disable_unprepare(phy->wkupclk);
|
|
|
|
disable_refclk:
|
|
if (!IS_ERR(phy->refclk))
|
|
clk_disable_unprepare(phy->refclk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
|
|
{
|
|
if (!IS_ERR(phy->wkupclk))
|
|
clk_disable_unprepare(phy->wkupclk);
|
|
if (!IS_ERR(phy->refclk)) {
|
|
clk_disable_unprepare(phy->refclk);
|
|
/*
|
|
* SATA refclk needs an additional disable as we left it
|
|
* on in probe to avoid Errata i783
|
|
*/
|
|
if (phy->sata_refclk_enabled) {
|
|
clk_disable_unprepare(phy->refclk);
|
|
phy->sata_refclk_enabled = false;
|
|
}
|
|
}
|
|
|
|
if (!IS_ERR(phy->div_clk))
|
|
clk_disable_unprepare(phy->div_clk);
|
|
}
|
|
|
|
static const struct of_device_id ti_pipe3_id_table[] = {
|
|
{
|
|
.compatible = "ti,phy-usb3",
|
|
.data = dpll_map_usb,
|
|
},
|
|
{
|
|
.compatible = "ti,omap-usb3",
|
|
.data = dpll_map_usb,
|
|
},
|
|
{
|
|
.compatible = "ti,phy-pipe3-sata",
|
|
.data = dpll_map_sata,
|
|
},
|
|
{
|
|
.compatible = "ti,phy-pipe3-pcie",
|
|
},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ti_pipe3_id_table);
|
|
|
|
static struct platform_driver ti_pipe3_driver = {
|
|
.probe = ti_pipe3_probe,
|
|
.remove = ti_pipe3_remove,
|
|
.driver = {
|
|
.name = "ti-pipe3",
|
|
.of_match_table = ti_pipe3_id_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(ti_pipe3_driver);
|
|
|
|
MODULE_ALIAS("platform:ti_pipe3");
|
|
MODULE_AUTHOR("Texas Instruments Inc.");
|
|
MODULE_DESCRIPTION("TI PIPE3 phy driver");
|
|
MODULE_LICENSE("GPL v2");
|