mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 10:49:33 +00:00
![Takashi Iwai](/assets/img/avatar_default.png)
The below is the patch to replace blindly all possible places, including Jack's fixes. Signed-off-by: Takashi Iwai <tiwai@suse.de> (Reviewed and checked rather than blindly added) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
614 lines
16 KiB
C
614 lines
16 KiB
C
/*
|
|
* File: linux/drivers/serial/bfin_sport_uart.c
|
|
*
|
|
* Based on: drivers/serial/bfin_5xx.c by Aubrey Li.
|
|
* Author: Roy Huang <roy.huang@analog.com>
|
|
*
|
|
* Created: Nov 22, 2006
|
|
* Copyright: (c) 2006-2007 Analog Devices Inc.
|
|
* Description: this driver enable SPORTs on Blackfin emulate UART.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, see the file COPYING, or write
|
|
* to the Free Software Foundation, Inc.,
|
|
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
/*
|
|
* This driver and the hardware supported are in term of EE-191 of ADI.
|
|
* http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf
|
|
* This application note describe how to implement a UART on a Sharc DSP,
|
|
* but this driver is implemented on Blackfin Processor.
|
|
*/
|
|
|
|
/* After reset, there is a prelude of low level pulse when transmit data first
|
|
* time. No addtional pulse in following transmit.
|
|
* According to document:
|
|
* The SPORTs are ready to start transmitting or receiving data no later than
|
|
* three serial clock cycles after they are enabled in the SPORTx_TCR1 or
|
|
* SPORTx_RCR1 register. No serial clock cycles are lost from this point on.
|
|
* The first internal frame sync will occur one frame sync delay after the
|
|
* SPORTs are ready. External frame syncs can occur as soon as the SPORT is
|
|
* ready.
|
|
*/
|
|
|
|
/* Thanks to Axel Alatalo <axel@rubico.se> for fixing sport rx bug. Sometimes
|
|
* sport receives data incorrectly. The following is Axel's words.
|
|
* As EE-191, sport rx samples 3 times of the UART baudrate and takes the
|
|
* middle smaple of every 3 samples as the data bit. For a 8-N-1 UART setting,
|
|
* 30 samples will be required for a byte. If transmitter sends a 1/3 bit short
|
|
* byte due to buadrate drift, then the 30th sample of a byte, this sample is
|
|
* also the third sample of the stop bit, will happens on the immediately
|
|
* following start bit which will be thrown away and missed. Thus since parts
|
|
* of the startbit will be missed and the receiver will begin to drift, the
|
|
* effect accumulates over time until synchronization is lost.
|
|
* If only require 2 samples of the stopbit (by sampling in total 29 samples),
|
|
* then a to short byte as in the case above will be tolerated. Then the 1/3
|
|
* early startbit will trigger a framesync since the last read is complete
|
|
* after only 2/3 stopbit and framesync is active during the last 1/3 looking
|
|
* for a possible early startbit. */
|
|
|
|
//#define DEBUG
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/console.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial_core.h>
|
|
|
|
#include <asm/delay.h>
|
|
#include <asm/portmux.h>
|
|
|
|
#include "bfin_sport_uart.h"
|
|
|
|
unsigned short bfin_uart_pin_req_sport0[] =
|
|
{P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, \
|
|
P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0};
|
|
|
|
unsigned short bfin_uart_pin_req_sport1[] =
|
|
{P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, \
|
|
P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0};
|
|
|
|
#define DRV_NAME "bfin-sport-uart"
|
|
|
|
struct sport_uart_port {
|
|
struct uart_port port;
|
|
char *name;
|
|
|
|
int tx_irq;
|
|
int rx_irq;
|
|
int err_irq;
|
|
};
|
|
|
|
static void sport_uart_tx_chars(struct sport_uart_port *up);
|
|
static void sport_stop_tx(struct uart_port *port);
|
|
|
|
static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
|
|
{
|
|
pr_debug("%s value:%x\n", __FUNCTION__, value);
|
|
/* Place a Start and Stop bit */
|
|
__asm__ volatile (
|
|
"R2 = b#01111111100;\n\t"
|
|
"R3 = b#10000000001;\n\t"
|
|
"%0 <<= 2;\n\t"
|
|
"%0 = %0 & R2;\n\t"
|
|
"%0 = %0 | R3;\n\t"
|
|
:"=r"(value)
|
|
:"0"(value)
|
|
:"R2", "R3");
|
|
pr_debug("%s value:%x\n", __FUNCTION__, value);
|
|
|
|
SPORT_PUT_TX(up, value);
|
|
}
|
|
|
|
static inline unsigned int rx_one_byte(struct sport_uart_port *up)
|
|
{
|
|
unsigned int value, extract;
|
|
|
|
value = SPORT_GET_RX32(up);
|
|
pr_debug("%s value:%x\n", __FUNCTION__, value);
|
|
|
|
/* Extract 8 bits data */
|
|
__asm__ volatile (
|
|
"R5 = 0;\n\t"
|
|
"P0 = 8;\n\t"
|
|
"R1 = 0x1801(Z);\n\t"
|
|
"R3 = 0x0300(Z);\n\t"
|
|
"R4 = 0;\n\t"
|
|
"LSETUP(loop_s, loop_e) LC0 = P0;\nloop_s:\t"
|
|
"R2 = extract(%1, R1.L)(Z);\n\t"
|
|
"R2 <<= R4;\n\t"
|
|
"R5 = R5 | R2;\n\t"
|
|
"R1 = R1 - R3;\nloop_e:\t"
|
|
"R4 += 1;\n\t"
|
|
"%0 = R5;\n\t"
|
|
:"=r"(extract)
|
|
:"r"(value)
|
|
:"P0", "R1", "R2","R3","R4", "R5");
|
|
|
|
pr_debug(" extract:%x\n", extract);
|
|
return extract;
|
|
}
|
|
|
|
static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate)
|
|
{
|
|
int tclkdiv, tfsdiv, rclkdiv;
|
|
|
|
/* Set TCR1 and TCR2 */
|
|
SPORT_PUT_TCR1(up, (LTFS | ITFS | TFSR | TLSBIT | ITCLK));
|
|
SPORT_PUT_TCR2(up, 10);
|
|
pr_debug("%s TCR1:%x, TCR2:%x\n", __FUNCTION__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up));
|
|
|
|
/* Set RCR1 and RCR2 */
|
|
SPORT_PUT_RCR1(up, (RCKFE | LARFS | LRFS | RFSR | IRCLK));
|
|
SPORT_PUT_RCR2(up, 28);
|
|
pr_debug("%s RCR1:%x, RCR2:%x\n", __FUNCTION__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up));
|
|
|
|
tclkdiv = sclk/(2 * baud_rate) - 1;
|
|
tfsdiv = 12;
|
|
rclkdiv = sclk/(2 * baud_rate * 3) - 1;
|
|
SPORT_PUT_TCLKDIV(up, tclkdiv);
|
|
SPORT_PUT_TFSDIV(up, tfsdiv);
|
|
SPORT_PUT_RCLKDIV(up, rclkdiv);
|
|
SSYNC();
|
|
pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, tfsdiv:%d, rclkdiv:%d\n",
|
|
__FUNCTION__, sclk, baud_rate, tclkdiv, tfsdiv, rclkdiv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id)
|
|
{
|
|
struct sport_uart_port *up = dev_id;
|
|
struct tty_struct *tty = up->port.info->port.tty;
|
|
unsigned int ch;
|
|
|
|
do {
|
|
ch = rx_one_byte(up);
|
|
up->port.icount.rx++;
|
|
|
|
if (uart_handle_sysrq_char(&up->port, ch))
|
|
;
|
|
else
|
|
tty_insert_flip_char(tty, ch, TTY_NORMAL);
|
|
} while (SPORT_GET_STAT(up) & RXNE);
|
|
tty_flip_buffer_push(tty);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id)
|
|
{
|
|
sport_uart_tx_chars(dev_id);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t sport_uart_err_irq(int irq, void *dev_id)
|
|
{
|
|
struct sport_uart_port *up = dev_id;
|
|
struct tty_struct *tty = up->port.info->port.tty;
|
|
unsigned int stat = SPORT_GET_STAT(up);
|
|
|
|
/* Overflow in RX FIFO */
|
|
if (stat & ROVF) {
|
|
up->port.icount.overrun++;
|
|
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
|
|
SPORT_PUT_STAT(up, ROVF); /* Clear ROVF bit */
|
|
}
|
|
/* These should not happen */
|
|
if (stat & (TOVF | TUVF | RUVF)) {
|
|
printk(KERN_ERR "SPORT Error:%s %s %s\n",
|
|
(stat & TOVF)?"TX overflow":"",
|
|
(stat & TUVF)?"TX underflow":"",
|
|
(stat & RUVF)?"RX underflow":"");
|
|
SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN);
|
|
SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN);
|
|
}
|
|
SSYNC();
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Reqeust IRQ, Setup clock */
|
|
static int sport_startup(struct uart_port *port)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
char buffer[20];
|
|
int retval;
|
|
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
memset(buffer, 20, '\0');
|
|
snprintf(buffer, 20, "%s rx", up->name);
|
|
retval = request_irq(up->rx_irq, sport_uart_rx_irq, IRQF_SAMPLE_RANDOM, buffer, up);
|
|
if (retval) {
|
|
printk(KERN_ERR "Unable to request interrupt %s\n", buffer);
|
|
return retval;
|
|
}
|
|
|
|
snprintf(buffer, 20, "%s tx", up->name);
|
|
retval = request_irq(up->tx_irq, sport_uart_tx_irq, IRQF_SAMPLE_RANDOM, buffer, up);
|
|
if (retval) {
|
|
printk(KERN_ERR "Unable to request interrupt %s\n", buffer);
|
|
goto fail1;
|
|
}
|
|
|
|
snprintf(buffer, 20, "%s err", up->name);
|
|
retval = request_irq(up->err_irq, sport_uart_err_irq, IRQF_SAMPLE_RANDOM, buffer, up);
|
|
if (retval) {
|
|
printk(KERN_ERR "Unable to request interrupt %s\n", buffer);
|
|
goto fail2;
|
|
}
|
|
|
|
if (port->line) {
|
|
if (peripheral_request_list(bfin_uart_pin_req_sport1, DRV_NAME))
|
|
goto fail3;
|
|
} else {
|
|
if (peripheral_request_list(bfin_uart_pin_req_sport0, DRV_NAME))
|
|
goto fail3;
|
|
}
|
|
|
|
sport_uart_setup(up, get_sclk(), port->uartclk);
|
|
|
|
/* Enable receive interrupt */
|
|
SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) | RSPEN));
|
|
SSYNC();
|
|
|
|
return 0;
|
|
|
|
|
|
fail3:
|
|
printk(KERN_ERR DRV_NAME
|
|
": Requesting Peripherals failed\n");
|
|
|
|
free_irq(up->err_irq, up);
|
|
fail2:
|
|
free_irq(up->tx_irq, up);
|
|
fail1:
|
|
free_irq(up->rx_irq, up);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
static void sport_uart_tx_chars(struct sport_uart_port *up)
|
|
{
|
|
struct circ_buf *xmit = &up->port.info->xmit;
|
|
|
|
if (SPORT_GET_STAT(up) & TXF)
|
|
return;
|
|
|
|
if (up->port.x_char) {
|
|
tx_one_byte(up, up->port.x_char);
|
|
up->port.icount.tx++;
|
|
up->port.x_char = 0;
|
|
return;
|
|
}
|
|
|
|
if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
|
|
sport_stop_tx(&up->port);
|
|
return;
|
|
}
|
|
|
|
while(!(SPORT_GET_STAT(up) & TXF) && !uart_circ_empty(xmit)) {
|
|
tx_one_byte(up, xmit->buf[xmit->tail]);
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1);
|
|
up->port.icount.tx++;
|
|
}
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(&up->port);
|
|
}
|
|
|
|
static unsigned int sport_tx_empty(struct uart_port *port)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
unsigned int stat;
|
|
|
|
stat = SPORT_GET_STAT(up);
|
|
pr_debug("%s stat:%04x\n", __FUNCTION__, stat);
|
|
if (stat & TXHRE) {
|
|
return TIOCSER_TEMT;
|
|
} else
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int sport_get_mctrl(struct uart_port *port)
|
|
{
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
return (TIOCM_CTS | TIOCM_CD | TIOCM_DSR);
|
|
}
|
|
|
|
static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
}
|
|
|
|
static void sport_stop_tx(struct uart_port *port)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
unsigned int stat;
|
|
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
|
|
stat = SPORT_GET_STAT(up);
|
|
while(!(stat & TXHRE)) {
|
|
udelay(1);
|
|
stat = SPORT_GET_STAT(up);
|
|
}
|
|
/* Although the hold register is empty, last byte is still in shift
|
|
* register and not sent out yet. If baud rate is lower than default,
|
|
* delay should be longer. For example, if the baud rate is 9600,
|
|
* the delay must be at least 2ms by experience */
|
|
udelay(500);
|
|
|
|
SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN));
|
|
SSYNC();
|
|
|
|
return;
|
|
}
|
|
|
|
static void sport_start_tx(struct uart_port *port)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
/* Write data into SPORT FIFO before enable SPROT to transmit */
|
|
sport_uart_tx_chars(up);
|
|
|
|
/* Enable transmit, then an interrupt will generated */
|
|
SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
|
|
SSYNC();
|
|
pr_debug("%s exit\n", __FUNCTION__);
|
|
}
|
|
|
|
static void sport_stop_rx(struct uart_port *port)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
/* Disable sport to stop rx */
|
|
SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN));
|
|
SSYNC();
|
|
}
|
|
|
|
static void sport_enable_ms(struct uart_port *port)
|
|
{
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
}
|
|
|
|
static void sport_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
}
|
|
|
|
static void sport_shutdown(struct uart_port *port)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
|
|
/* Disable sport */
|
|
SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN));
|
|
SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN));
|
|
SSYNC();
|
|
|
|
if (port->line) {
|
|
peripheral_free_list(bfin_uart_pin_req_sport1);
|
|
} else {
|
|
peripheral_free_list(bfin_uart_pin_req_sport0);
|
|
}
|
|
|
|
free_irq(up->rx_irq, up);
|
|
free_irq(up->tx_irq, up);
|
|
free_irq(up->err_irq, up);
|
|
}
|
|
|
|
static void sport_set_termios(struct uart_port *port,
|
|
struct termios *termios, struct termios *old)
|
|
{
|
|
pr_debug("%s enter, c_cflag:%08x\n", __FUNCTION__, termios->c_cflag);
|
|
uart_update_timeout(port, CS8 ,port->uartclk);
|
|
}
|
|
|
|
static const char *sport_type(struct uart_port *port)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
return up->name;
|
|
}
|
|
|
|
static void sport_release_port(struct uart_port *port)
|
|
{
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
}
|
|
|
|
static int sport_request_port(struct uart_port *port)
|
|
{
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
return 0;
|
|
}
|
|
|
|
static void sport_config_port(struct uart_port *port, int flags)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
up->port.type = PORT_BFIN_SPORT;
|
|
}
|
|
|
|
static int sport_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
{
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
return 0;
|
|
}
|
|
|
|
struct uart_ops sport_uart_ops = {
|
|
.tx_empty = sport_tx_empty,
|
|
.set_mctrl = sport_set_mctrl,
|
|
.get_mctrl = sport_get_mctrl,
|
|
.stop_tx = sport_stop_tx,
|
|
.start_tx = sport_start_tx,
|
|
.stop_rx = sport_stop_rx,
|
|
.enable_ms = sport_enable_ms,
|
|
.break_ctl = sport_break_ctl,
|
|
.startup = sport_startup,
|
|
.shutdown = sport_shutdown,
|
|
.set_termios = sport_set_termios,
|
|
.type = sport_type,
|
|
.release_port = sport_release_port,
|
|
.request_port = sport_request_port,
|
|
.config_port = sport_config_port,
|
|
.verify_port = sport_verify_port,
|
|
};
|
|
|
|
static struct sport_uart_port sport_uart_ports[] = {
|
|
{ /* SPORT 0 */
|
|
.name = "SPORT0",
|
|
.tx_irq = IRQ_SPORT0_TX,
|
|
.rx_irq = IRQ_SPORT0_RX,
|
|
.err_irq= IRQ_SPORT0_ERROR,
|
|
.port = {
|
|
.type = PORT_BFIN_SPORT,
|
|
.iotype = UPIO_MEM,
|
|
.membase = (void __iomem *)SPORT0_TCR1,
|
|
.mapbase = SPORT0_TCR1,
|
|
.irq = IRQ_SPORT0_RX,
|
|
.uartclk = CONFIG_SPORT_BAUD_RATE,
|
|
.fifosize = 8,
|
|
.ops = &sport_uart_ops,
|
|
.line = 0,
|
|
},
|
|
}, { /* SPORT 1 */
|
|
.name = "SPORT1",
|
|
.tx_irq = IRQ_SPORT1_TX,
|
|
.rx_irq = IRQ_SPORT1_RX,
|
|
.err_irq= IRQ_SPORT1_ERROR,
|
|
.port = {
|
|
.type = PORT_BFIN_SPORT,
|
|
.iotype = UPIO_MEM,
|
|
.membase = (void __iomem *)SPORT1_TCR1,
|
|
.mapbase = SPORT1_TCR1,
|
|
.irq = IRQ_SPORT1_RX,
|
|
.uartclk = CONFIG_SPORT_BAUD_RATE,
|
|
.fifosize = 8,
|
|
.ops = &sport_uart_ops,
|
|
.line = 1,
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct uart_driver sport_uart_reg = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = "SPORT-UART",
|
|
.dev_name = "ttySS",
|
|
.major = 204,
|
|
.minor = 84,
|
|
.nr = ARRAY_SIZE(sport_uart_ports),
|
|
.cons = NULL,
|
|
};
|
|
|
|
static int sport_uart_suspend(struct platform_device *dev, pm_message_t state)
|
|
{
|
|
struct sport_uart_port *sport = platform_get_drvdata(dev);
|
|
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
if (sport)
|
|
uart_suspend_port(&sport_uart_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sport_uart_resume(struct platform_device *dev)
|
|
{
|
|
struct sport_uart_port *sport = platform_get_drvdata(dev);
|
|
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
if (sport)
|
|
uart_resume_port(&sport_uart_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sport_uart_probe(struct platform_device *dev)
|
|
{
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
sport_uart_ports[dev->id].port.dev = &dev->dev;
|
|
uart_add_one_port(&sport_uart_reg, &sport_uart_ports[dev->id].port);
|
|
platform_set_drvdata(dev, &sport_uart_ports[dev->id]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sport_uart_remove(struct platform_device *dev)
|
|
{
|
|
struct sport_uart_port *sport = platform_get_drvdata(dev);
|
|
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
platform_set_drvdata(dev, NULL);
|
|
|
|
if (sport)
|
|
uart_remove_one_port(&sport_uart_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sport_uart_driver = {
|
|
.probe = sport_uart_probe,
|
|
.remove = sport_uart_remove,
|
|
.suspend = sport_uart_suspend,
|
|
.resume = sport_uart_resume,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
},
|
|
};
|
|
|
|
static int __init sport_uart_init(void)
|
|
{
|
|
int ret;
|
|
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
ret = uart_register_driver(&sport_uart_reg);
|
|
if (ret != 0) {
|
|
printk(KERN_ERR "Failed to register %s:%d\n",
|
|
sport_uart_reg.driver_name, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = platform_driver_register(&sport_uart_driver);
|
|
if (ret != 0) {
|
|
printk(KERN_ERR "Failed to register sport uart driver:%d\n", ret);
|
|
uart_unregister_driver(&sport_uart_reg);
|
|
}
|
|
|
|
|
|
pr_debug("%s exit\n", __FUNCTION__);
|
|
return ret;
|
|
}
|
|
|
|
static void __exit sport_uart_exit(void)
|
|
{
|
|
pr_debug("%s enter\n", __FUNCTION__);
|
|
platform_driver_unregister(&sport_uart_driver);
|
|
uart_unregister_driver(&sport_uart_reg);
|
|
}
|
|
|
|
module_init(sport_uart_init);
|
|
module_exit(sport_uart_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|