mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-20 14:16:02 +00:00
![Jonathan Cameron](/assets/img/avatar_default.png)
Letting the compiler remove these functions when the kernel is built without CONFIG_PM_SLEEP support is simpler and less error prone than the use of #ifdef based config guards. Removing instances of this approach from IIO also stops them being copied into new drivers. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220130193147.279148-5-jic23@kernel.org
253 lines
6.4 KiB
C
253 lines
6.4 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* IIO driver for the 3-axis accelerometer Domintech ARD10.
|
|
*
|
|
* Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
|
|
* Copyright (c) 2012 Domintech Technology Co., Ltd
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/byteorder/generic.h>
|
|
|
|
#define DMARD10_REG_ACTR 0x00
|
|
#define DMARD10_REG_AFEM 0x0c
|
|
#define DMARD10_REG_STADR 0x12
|
|
#define DMARD10_REG_STAINT 0x1c
|
|
#define DMARD10_REG_MISC2 0x1f
|
|
#define DMARD10_REG_PD 0x21
|
|
|
|
#define DMARD10_MODE_OFF 0x00
|
|
#define DMARD10_MODE_STANDBY 0x02
|
|
#define DMARD10_MODE_ACTIVE 0x06
|
|
#define DMARD10_MODE_READ_OTP 0x12
|
|
#define DMARD10_MODE_RESET_DATA_PATH 0x82
|
|
|
|
/* AFEN set 1, ATM[2:0]=b'000 (normal), EN_Z/Y/X/T=1 */
|
|
#define DMARD10_VALUE_AFEM_AFEN_NORMAL 0x8f
|
|
/* ODR[3:0]=b'0111 (100Hz), CCK[3:0]=b'0100 (204.8kHZ) */
|
|
#define DMARD10_VALUE_CKSEL_ODR_100_204 0x74
|
|
/* INTC[6:5]=b'00 */
|
|
#define DMARD10_VALUE_INTC 0x00
|
|
/* TAP1/TAP2 Average 2 */
|
|
#define DMARD10_VALUE_TAPNS_AVE_2 0x11
|
|
|
|
#define DMARD10_VALUE_STADR 0x55
|
|
#define DMARD10_VALUE_STAINT 0xaa
|
|
#define DMARD10_VALUE_MISC2_OSCA_EN 0x08
|
|
#define DMARD10_VALUE_PD_RST 0x52
|
|
|
|
/* Offsets into the buffer read in dmard10_read_raw() */
|
|
#define DMARD10_X_OFFSET 1
|
|
#define DMARD10_Y_OFFSET 2
|
|
#define DMARD10_Z_OFFSET 3
|
|
|
|
/*
|
|
* a value of + or -128 corresponds to + or - 1G
|
|
* scale = 9.81 / 128 = 0.076640625
|
|
*/
|
|
|
|
static const int dmard10_nscale = 76640625;
|
|
|
|
#define DMARD10_CHANNEL(reg, axis) { \
|
|
.type = IIO_ACCEL, \
|
|
.address = reg, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
}
|
|
|
|
static const struct iio_chan_spec dmard10_channels[] = {
|
|
DMARD10_CHANNEL(DMARD10_X_OFFSET, X),
|
|
DMARD10_CHANNEL(DMARD10_Y_OFFSET, Y),
|
|
DMARD10_CHANNEL(DMARD10_Z_OFFSET, Z),
|
|
};
|
|
|
|
struct dmard10_data {
|
|
struct i2c_client *client;
|
|
};
|
|
|
|
/* Init sequence taken from the android driver */
|
|
static int dmard10_reset(struct i2c_client *client)
|
|
{
|
|
unsigned char buffer[7];
|
|
int ret;
|
|
|
|
/* 1. Powerdown reset */
|
|
ret = i2c_smbus_write_byte_data(client, DMARD10_REG_PD,
|
|
DMARD10_VALUE_PD_RST);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* 2. ACTR => Standby mode => Download OTP to parameter reg =>
|
|
* Standby mode => Reset data path => Standby mode
|
|
*/
|
|
buffer[0] = DMARD10_REG_ACTR;
|
|
buffer[1] = DMARD10_MODE_STANDBY;
|
|
buffer[2] = DMARD10_MODE_READ_OTP;
|
|
buffer[3] = DMARD10_MODE_STANDBY;
|
|
buffer[4] = DMARD10_MODE_RESET_DATA_PATH;
|
|
buffer[5] = DMARD10_MODE_STANDBY;
|
|
ret = i2c_master_send(client, buffer, 6);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* 3. OSCA_EN = 1, TSTO = b'000 (INT1 = normal, TEST0 = normal) */
|
|
ret = i2c_smbus_write_byte_data(client, DMARD10_REG_MISC2,
|
|
DMARD10_VALUE_MISC2_OSCA_EN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* 4. AFEN = 1 (AFE will powerdown after ADC) */
|
|
buffer[0] = DMARD10_REG_AFEM;
|
|
buffer[1] = DMARD10_VALUE_AFEM_AFEN_NORMAL;
|
|
buffer[2] = DMARD10_VALUE_CKSEL_ODR_100_204;
|
|
buffer[3] = DMARD10_VALUE_INTC;
|
|
buffer[4] = DMARD10_VALUE_TAPNS_AVE_2;
|
|
buffer[5] = 0x00; /* DLYC, no delay timing */
|
|
buffer[6] = 0x07; /* INTD=1 push-pull, INTA=1 active high, AUTOT=1 */
|
|
ret = i2c_master_send(client, buffer, 7);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* 5. Activation mode */
|
|
ret = i2c_smbus_write_byte_data(client, DMARD10_REG_ACTR,
|
|
DMARD10_MODE_ACTIVE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Shutdown sequence taken from the android driver */
|
|
static int dmard10_shutdown(struct i2c_client *client)
|
|
{
|
|
unsigned char buffer[3];
|
|
|
|
buffer[0] = DMARD10_REG_ACTR;
|
|
buffer[1] = DMARD10_MODE_STANDBY;
|
|
buffer[2] = DMARD10_MODE_OFF;
|
|
|
|
return i2c_master_send(client, buffer, 3);
|
|
}
|
|
|
|
static int dmard10_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct dmard10_data *data = iio_priv(indio_dev);
|
|
__le16 buf[4];
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
/*
|
|
* Read 8 bytes starting at the REG_STADR register, trying to
|
|
* read the individual X, Y, Z registers will always read 0.
|
|
*/
|
|
ret = i2c_smbus_read_i2c_block_data(data->client,
|
|
DMARD10_REG_STADR,
|
|
sizeof(buf), (u8 *)buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = le16_to_cpu(buf[chan->address]);
|
|
*val = sign_extend32(ret, 12);
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = 0;
|
|
*val2 = dmard10_nscale;
|
|
return IIO_VAL_INT_PLUS_NANO;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_info dmard10_info = {
|
|
.read_raw = dmard10_read_raw,
|
|
};
|
|
|
|
static void dmard10_shutdown_cleanup(void *client)
|
|
{
|
|
dmard10_shutdown(client);
|
|
}
|
|
|
|
static int dmard10_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int ret;
|
|
struct iio_dev *indio_dev;
|
|
struct dmard10_data *data;
|
|
|
|
/* These 2 registers have special POR reset values used for id */
|
|
ret = i2c_smbus_read_byte_data(client, DMARD10_REG_STADR);
|
|
if (ret != DMARD10_VALUE_STADR)
|
|
return (ret < 0) ? ret : -ENODEV;
|
|
|
|
ret = i2c_smbus_read_byte_data(client, DMARD10_REG_STAINT);
|
|
if (ret != DMARD10_VALUE_STAINT)
|
|
return (ret < 0) ? ret : -ENODEV;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev) {
|
|
dev_err(&client->dev, "iio allocation failed!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
data = iio_priv(indio_dev);
|
|
data->client = client;
|
|
|
|
indio_dev->info = &dmard10_info;
|
|
indio_dev->name = "dmard10";
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = dmard10_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(dmard10_channels);
|
|
|
|
ret = dmard10_reset(client);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = devm_add_action_or_reset(&client->dev, dmard10_shutdown_cleanup,
|
|
client);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return devm_iio_device_register(&client->dev, indio_dev);
|
|
}
|
|
|
|
static int dmard10_suspend(struct device *dev)
|
|
{
|
|
return dmard10_shutdown(to_i2c_client(dev));
|
|
}
|
|
|
|
static int dmard10_resume(struct device *dev)
|
|
{
|
|
return dmard10_reset(to_i2c_client(dev));
|
|
}
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(dmard10_pm_ops, dmard10_suspend,
|
|
dmard10_resume);
|
|
|
|
static const struct i2c_device_id dmard10_i2c_id[] = {
|
|
{"dmard10", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, dmard10_i2c_id);
|
|
|
|
static struct i2c_driver dmard10_driver = {
|
|
.driver = {
|
|
.name = "dmard10",
|
|
.pm = pm_sleep_ptr(&dmard10_pm_ops),
|
|
},
|
|
.probe = dmard10_probe,
|
|
.id_table = dmard10_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(dmard10_driver);
|
|
|
|
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
|
MODULE_DESCRIPTION("Domintech ARD10 3-Axis Accelerometer driver");
|
|
MODULE_LICENSE("GPL v2");
|