mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-11-01 00:48:50 +00:00
Code Issues Releases Wiki Activity
linux-stable/arch/arm/mach-omap2/omap_twl.c
Tony Lindgren d44fa156dc ARM: OMAP2+: Configure voltage controller for cpcap 
We can configure voltage controller for cpcap with the data available in
Motorola Mapphone Android Linux kernel. Let's add it so we can have droid4
behave the same way for voltage controller as other omap4 devices and save
some power when idle.

Note that we're now using high-speed i2c mode, looks like the Motorola
kernel had a typo using 0x200 instead of 200 for the timings which may
caused it to not work properly.

Also note that in the long run, this should just become dts data for a
voltage controller device driver. But let's get things working first to
make it possible to test further changes easily.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-16 07:51:15 -07:00

247 lines
6.7 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/**
* OMAP and TWL PMIC specific initializations.
*
* Copyright (C) 2010 Texas Instruments Incorporated.
* Thara Gopinath
* Copyright (C) 2009 Texas Instruments Incorporated.
* Nishanth Menon
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mfd/twl.h>
#include "soc.h"
#include "voltage.h"
#include "pm.h"
#define OMAP3_SRI2C_SLAVE_ADDR 0x12
#define OMAP3_VDD_MPU_SR_CONTROL_REG 0x00
#define OMAP3_VDD_CORE_SR_CONTROL_REG 0x01
#define OMAP3_VP_CONFIG_ERROROFFSET 0x00
#define OMAP3_VP_VSTEPMIN_VSTEPMIN 0x1
#define OMAP3_VP_VSTEPMAX_VSTEPMAX 0x04
#define OMAP3_VP_VLIMITTO_TIMEOUT_US 200
#define OMAP4_SRI2C_SLAVE_ADDR 0x12
#define OMAP4_VDD_MPU_SR_VOLT_REG 0x55
#define OMAP4_VDD_MPU_SR_CMD_REG 0x56
#define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B
#define OMAP4_VDD_IVA_SR_CMD_REG 0x5C
#define OMAP4_VDD_CORE_SR_VOLT_REG 0x61
#define OMAP4_VDD_CORE_SR_CMD_REG 0x62
static bool is_offset_valid;
static u8 smps_offset;
#define REG_SMPS_OFFSET 0xE0
static unsigned long twl4030_vsel_to_uv(const u8 vsel)
{
return (((vsel * 125) + 6000)) * 100;
}
static u8 twl4030_uv_to_vsel(unsigned long uv)
{
return DIV_ROUND_UP(uv - 600000, 12500);
}
static unsigned long twl6030_vsel_to_uv(const u8 vsel)
{
/*
* In TWL6030 depending on the value of SMPS_OFFSET
* efuse register the voltage range supported in
* standard mode can be either between 0.6V - 1.3V or
* 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
* is programmed to all 0's where as starting from
* TWL6030 ES1.1 the efuse is programmed to 1
*/
if (!is_offset_valid) {
twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
REG_SMPS_OFFSET);
is_offset_valid = true;
}
if (!vsel)
return 0;
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
* values for voltages above 1.3V. Currently we are
* hardcoding only for 1.35 V which is used for 1GH OPP for
* OMAP4430.
*/
if (vsel == 0x3A)
return 1350000;
if (smps_offset & 0x8)
return ((((vsel - 1) * 1266) + 70900)) * 10;
else
return ((((vsel - 1) * 1266) + 60770)) * 10;
}
static u8 twl6030_uv_to_vsel(unsigned long uv)
{
/*
* In TWL6030 depending on the value of SMPS_OFFSET
* efuse register the voltage range supported in
* standard mode can be either between 0.6V - 1.3V or
* 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
* is programmed to all 0's where as starting from
* TWL6030 ES1.1 the efuse is programmed to 1
*/
if (!is_offset_valid) {
twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
REG_SMPS_OFFSET);
is_offset_valid = true;
}
if (!uv)
return 0x00;
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
* values for voltages above 1.3V. Currently we are
* hardcoding only for 1.35 V which is used for 1GH OPP for
* OMAP4430.
*/
if (uv > twl6030_vsel_to_uv(0x39)) {
if (uv == 1350000)
return 0x3A;
pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n",
__func__, uv, twl6030_vsel_to_uv(0x39));
return 0x3A;
}
if (smps_offset & 0x8)
return DIV_ROUND_UP(uv - 709000, 12660) + 1;
else
return DIV_ROUND_UP(uv - 607700, 12660) + 1;
}
static struct omap_voltdm_pmic omap3_mpu_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
.vddmin = 600000,
.vddmax = 1450000,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG,
.i2c_high_speed = true,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
static struct omap_voltdm_pmic omap3_core_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
.vddmin = 600000,
.vddmax = 1450000,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG,
.i2c_high_speed = true,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
static struct omap_voltdm_pmic omap4_mpu_pmic = {
.slew_rate = 4000,
.step_size = 12660,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vddmin = 0,
.vddmax = 2100000,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG,
.cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG,
.i2c_high_speed = true,
.i2c_pad_load = 3,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
static struct omap_voltdm_pmic omap4_iva_pmic = {
.slew_rate = 4000,
.step_size = 12660,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vddmin = 0,
.vddmax = 2100000,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG,
.cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG,
.i2c_high_speed = true,
.i2c_pad_load = 3,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
static struct omap_voltdm_pmic omap4_core_pmic = {
.slew_rate = 4000,
.step_size = 12660,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vddmin = 0,
.vddmax = 2100000,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG,
.cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG,
.i2c_high_speed = true,
.i2c_pad_load = 3,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
int __init omap4_twl_init(void)
{
struct voltagedomain *voltdm;
if (!cpu_is_omap44xx() ||
of_find_compatible_node(NULL, NULL, "motorola,cpcap"))
return -ENODEV;
voltdm = voltdm_lookup("mpu");
omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic);
voltdm = voltdm_lookup("iva");
omap_voltage_register_pmic(voltdm, &omap4_iva_pmic);
voltdm = voltdm_lookup("core");
omap_voltage_register_pmic(voltdm, &omap4_core_pmic);
return 0;
}
int __init omap3_twl_init(void)
{
struct voltagedomain *voltdm;
if (!cpu_is_omap34xx())
return -ENODEV;
voltdm = voltdm_lookup("mpu_iva");
omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic);
voltdm = voltdm_lookup("core");
omap_voltage_register_pmic(voltdm, &omap3_core_pmic);
return 0;
}
Reference in a new issue View git blame Copy permalink