linux-stable/drivers/gpu/drm/gma500/psb_intel_lvds.c
Laurent Pinchart 949f08862d drm: Make the connector .detect() callback optional
Many drivers (21 to be exact) create connectors that are always
connected (for instance to an LVDS or DSI panel). Instead of forcing
them to implement a dummy .detect() handler, make the callback optional
and consider the connector as always connected in that case.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[seanpaul fixed small conflict in rcar-du/rcar_du_lvdscon.c]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-12-01 10:05:53 -05:00

825 lines
23 KiB
C

/*
* Copyright © 2006-2007 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* Authors:
* Eric Anholt <eric@anholt.net>
* Dave Airlie <airlied@linux.ie>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#include <linux/i2c.h>
#include <drm/drmP.h>
#include "intel_bios.h"
#include "psb_drv.h"
#include "psb_intel_drv.h"
#include "psb_intel_reg.h"
#include "power.h"
#include <linux/pm_runtime.h>
/*
* LVDS I2C backlight control macros
*/
#define BRIGHTNESS_MAX_LEVEL 100
#define BRIGHTNESS_MASK 0xFF
#define BLC_I2C_TYPE 0x01
#define BLC_PWM_TYPT 0x02
#define BLC_POLARITY_NORMAL 0
#define BLC_POLARITY_INVERSE 1
#define PSB_BLC_MAX_PWM_REG_FREQ (0xFFFE)
#define PSB_BLC_MIN_PWM_REG_FREQ (0x2)
#define PSB_BLC_PWM_PRECISION_FACTOR (10)
#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16)
#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
struct psb_intel_lvds_priv {
/*
* Saved LVDO output states
*/
uint32_t savePP_ON;
uint32_t savePP_OFF;
uint32_t saveLVDS;
uint32_t savePP_CONTROL;
uint32_t savePP_CYCLE;
uint32_t savePFIT_CONTROL;
uint32_t savePFIT_PGM_RATIOS;
uint32_t saveBLC_PWM_CTL;
struct psb_intel_i2c_chan *i2c_bus;
struct psb_intel_i2c_chan *ddc_bus;
};
/*
* Returns the maximum level of the backlight duty cycle field.
*/
static u32 psb_intel_lvds_get_max_backlight(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
u32 ret;
if (gma_power_begin(dev, false)) {
ret = REG_READ(BLC_PWM_CTL);
gma_power_end(dev);
} else /* Powered off, use the saved value */
ret = dev_priv->regs.saveBLC_PWM_CTL;
/* Top 15bits hold the frequency mask */
ret = (ret & BACKLIGHT_MODULATION_FREQ_MASK) >>
BACKLIGHT_MODULATION_FREQ_SHIFT;
ret *= 2; /* Return a 16bit range as needed for setting */
if (ret == 0)
dev_err(dev->dev, "BL bug: Reg %08x save %08X\n",
REG_READ(BLC_PWM_CTL), dev_priv->regs.saveBLC_PWM_CTL);
return ret;
}
/*
* Set LVDS backlight level by I2C command
*
* FIXME: at some point we need to both track this for PM and also
* disable runtime pm on MRST if the brightness is nil (ie blanked)
*/
static int psb_lvds_i2c_set_brightness(struct drm_device *dev,
unsigned int level)
{
struct drm_psb_private *dev_priv =
(struct drm_psb_private *)dev->dev_private;
struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus;
u8 out_buf[2];
unsigned int blc_i2c_brightness;
struct i2c_msg msgs[] = {
{
.addr = lvds_i2c_bus->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
}
};
blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level *
BRIGHTNESS_MASK /
BRIGHTNESS_MAX_LEVEL);
if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness;
out_buf[0] = dev_priv->lvds_bl->brightnesscmd;
out_buf[1] = (u8)blc_i2c_brightness;
if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1) {
dev_dbg(dev->dev, "I2C set brightness.(command, value) (%d, %d)\n",
dev_priv->lvds_bl->brightnesscmd,
blc_i2c_brightness);
return 0;
}
dev_err(dev->dev, "I2C transfer error\n");
return -1;
}
static int psb_lvds_pwm_set_brightness(struct drm_device *dev, int level)
{
struct drm_psb_private *dev_priv =
(struct drm_psb_private *)dev->dev_private;
u32 max_pwm_blc;
u32 blc_pwm_duty_cycle;
max_pwm_blc = psb_intel_lvds_get_max_backlight(dev);
/*BLC_PWM_CTL Should be initiated while backlight device init*/
BUG_ON(max_pwm_blc == 0);
blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL;
if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle;
blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
REG_WRITE(BLC_PWM_CTL,
(max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
(blc_pwm_duty_cycle));
dev_info(dev->dev, "Backlight lvds set brightness %08x\n",
(max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
(blc_pwm_duty_cycle));
return 0;
}
/*
* Set LVDS backlight level either by I2C or PWM
*/
void psb_intel_lvds_set_brightness(struct drm_device *dev, int level)
{
struct drm_psb_private *dev_priv = dev->dev_private;
dev_dbg(dev->dev, "backlight level is %d\n", level);
if (!dev_priv->lvds_bl) {
dev_err(dev->dev, "NO LVDS backlight info\n");
return;
}
if (dev_priv->lvds_bl->type == BLC_I2C_TYPE)
psb_lvds_i2c_set_brightness(dev, level);
else
psb_lvds_pwm_set_brightness(dev, level);
}
/*
* Sets the backlight level.
*
* level: backlight level, from 0 to psb_intel_lvds_get_max_backlight().
*/
static void psb_intel_lvds_set_backlight(struct drm_device *dev, int level)
{
struct drm_psb_private *dev_priv = dev->dev_private;
u32 blc_pwm_ctl;
if (gma_power_begin(dev, false)) {
blc_pwm_ctl = REG_READ(BLC_PWM_CTL);
blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK;
REG_WRITE(BLC_PWM_CTL,
(blc_pwm_ctl |
(level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl |
(level << BACKLIGHT_DUTY_CYCLE_SHIFT));
gma_power_end(dev);
} else {
blc_pwm_ctl = dev_priv->regs.saveBLC_PWM_CTL &
~BACKLIGHT_DUTY_CYCLE_MASK;
dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl |
(level << BACKLIGHT_DUTY_CYCLE_SHIFT));
}
}
/*
* Sets the power state for the panel.
*/
static void psb_intel_lvds_set_power(struct drm_device *dev, bool on)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
u32 pp_status;
if (!gma_power_begin(dev, true)) {
dev_err(dev->dev, "set power, chip off!\n");
return;
}
if (on) {
REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
POWER_TARGET_ON);
do {
pp_status = REG_READ(PP_STATUS);
} while ((pp_status & PP_ON) == 0);
psb_intel_lvds_set_backlight(dev,
mode_dev->backlight_duty_cycle);
} else {
psb_intel_lvds_set_backlight(dev, 0);
REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
~POWER_TARGET_ON);
do {
pp_status = REG_READ(PP_STATUS);
} while (pp_status & PP_ON);
}
gma_power_end(dev);
}
static void psb_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
if (mode == DRM_MODE_DPMS_ON)
psb_intel_lvds_set_power(dev, true);
else
psb_intel_lvds_set_power(dev, false);
/* XXX: We never power down the LVDS pairs. */
}
static void psb_intel_lvds_save(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_psb_private *dev_priv =
(struct drm_psb_private *)dev->dev_private;
struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
struct psb_intel_lvds_priv *lvds_priv =
(struct psb_intel_lvds_priv *)gma_encoder->dev_priv;
lvds_priv->savePP_ON = REG_READ(LVDSPP_ON);
lvds_priv->savePP_OFF = REG_READ(LVDSPP_OFF);
lvds_priv->saveLVDS = REG_READ(LVDS);
lvds_priv->savePP_CONTROL = REG_READ(PP_CONTROL);
lvds_priv->savePP_CYCLE = REG_READ(PP_CYCLE);
/*lvds_priv->savePP_DIVISOR = REG_READ(PP_DIVISOR);*/
lvds_priv->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
lvds_priv->savePFIT_CONTROL = REG_READ(PFIT_CONTROL);
lvds_priv->savePFIT_PGM_RATIOS = REG_READ(PFIT_PGM_RATIOS);
/*TODO: move backlight_duty_cycle to psb_intel_lvds_priv*/
dev_priv->backlight_duty_cycle = (dev_priv->regs.saveBLC_PWM_CTL &
BACKLIGHT_DUTY_CYCLE_MASK);
/*
* If the light is off at server startup,
* just make it full brightness
*/
if (dev_priv->backlight_duty_cycle == 0)
dev_priv->backlight_duty_cycle =
psb_intel_lvds_get_max_backlight(dev);
dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n",
lvds_priv->savePP_ON,
lvds_priv->savePP_OFF,
lvds_priv->saveLVDS,
lvds_priv->savePP_CONTROL,
lvds_priv->savePP_CYCLE,
lvds_priv->saveBLC_PWM_CTL);
}
static void psb_intel_lvds_restore(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
u32 pp_status;
struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
struct psb_intel_lvds_priv *lvds_priv =
(struct psb_intel_lvds_priv *)gma_encoder->dev_priv;
dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n",
lvds_priv->savePP_ON,
lvds_priv->savePP_OFF,
lvds_priv->saveLVDS,
lvds_priv->savePP_CONTROL,
lvds_priv->savePP_CYCLE,
lvds_priv->saveBLC_PWM_CTL);
REG_WRITE(BLC_PWM_CTL, lvds_priv->saveBLC_PWM_CTL);
REG_WRITE(PFIT_CONTROL, lvds_priv->savePFIT_CONTROL);
REG_WRITE(PFIT_PGM_RATIOS, lvds_priv->savePFIT_PGM_RATIOS);
REG_WRITE(LVDSPP_ON, lvds_priv->savePP_ON);
REG_WRITE(LVDSPP_OFF, lvds_priv->savePP_OFF);
/*REG_WRITE(PP_DIVISOR, lvds_priv->savePP_DIVISOR);*/
REG_WRITE(PP_CYCLE, lvds_priv->savePP_CYCLE);
REG_WRITE(PP_CONTROL, lvds_priv->savePP_CONTROL);
REG_WRITE(LVDS, lvds_priv->saveLVDS);
if (lvds_priv->savePP_CONTROL & POWER_TARGET_ON) {
REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
POWER_TARGET_ON);
do {
pp_status = REG_READ(PP_STATUS);
} while ((pp_status & PP_ON) == 0);
} else {
REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
~POWER_TARGET_ON);
do {
pp_status = REG_READ(PP_STATUS);
} while (pp_status & PP_ON);
}
}
int psb_intel_lvds_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct drm_psb_private *dev_priv = connector->dev->dev_private;
struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
struct drm_display_mode *fixed_mode =
dev_priv->mode_dev.panel_fixed_mode;
if (gma_encoder->type == INTEL_OUTPUT_MIPI2)
fixed_mode = dev_priv->mode_dev.panel_fixed_mode2;
/* just in case */
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
/* just in case */
if (mode->flags & DRM_MODE_FLAG_INTERLACE)
return MODE_NO_INTERLACE;
if (fixed_mode) {
if (mode->hdisplay > fixed_mode->hdisplay)
return MODE_PANEL;
if (mode->vdisplay > fixed_mode->vdisplay)
return MODE_PANEL;
}
return MODE_OK;
}
bool psb_intel_lvds_mode_fixup(struct drm_encoder *encoder,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
struct gma_crtc *gma_crtc = to_gma_crtc(encoder->crtc);
struct drm_encoder *tmp_encoder;
struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode;
struct gma_encoder *gma_encoder = to_gma_encoder(encoder);
if (gma_encoder->type == INTEL_OUTPUT_MIPI2)
panel_fixed_mode = mode_dev->panel_fixed_mode2;
/* PSB requires the LVDS is on pipe B, MRST has only one pipe anyway */
if (!IS_MRST(dev) && gma_crtc->pipe == 0) {
printk(KERN_ERR "Can't support LVDS on pipe A\n");
return false;
}
if (IS_MRST(dev) && gma_crtc->pipe != 0) {
printk(KERN_ERR "Must use PIPE A\n");
return false;
}
/* Should never happen!! */
list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list,
head) {
if (tmp_encoder != encoder
&& tmp_encoder->crtc == encoder->crtc) {
printk(KERN_ERR "Can't enable LVDS and another "
"encoder on the same pipe\n");
return false;
}
}
/*
* If we have timings from the BIOS for the panel, put them in
* to the adjusted mode. The CRTC will be set up for this mode,
* with the panel scaling set up to source from the H/VDisplay
* of the original mode.
*/
if (panel_fixed_mode != NULL) {
adjusted_mode->hdisplay = panel_fixed_mode->hdisplay;
adjusted_mode->hsync_start = panel_fixed_mode->hsync_start;
adjusted_mode->hsync_end = panel_fixed_mode->hsync_end;
adjusted_mode->htotal = panel_fixed_mode->htotal;
adjusted_mode->vdisplay = panel_fixed_mode->vdisplay;
adjusted_mode->vsync_start = panel_fixed_mode->vsync_start;
adjusted_mode->vsync_end = panel_fixed_mode->vsync_end;
adjusted_mode->vtotal = panel_fixed_mode->vtotal;
adjusted_mode->clock = panel_fixed_mode->clock;
drm_mode_set_crtcinfo(adjusted_mode,
CRTC_INTERLACE_HALVE_V);
}
/*
* XXX: It would be nice to support lower refresh rates on the
* panels to reduce power consumption, and perhaps match the
* user's requested refresh rate.
*/
return true;
}
static void psb_intel_lvds_prepare(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
if (!gma_power_begin(dev, true))
return;
mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
BACKLIGHT_DUTY_CYCLE_MASK);
psb_intel_lvds_set_power(dev, false);
gma_power_end(dev);
}
static void psb_intel_lvds_commit(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
if (mode_dev->backlight_duty_cycle == 0)
mode_dev->backlight_duty_cycle =
psb_intel_lvds_get_max_backlight(dev);
psb_intel_lvds_set_power(dev, true);
}
static void psb_intel_lvds_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
u32 pfit_control;
/*
* The LVDS pin pair will already have been turned on in the
* psb_intel_crtc_mode_set since it has a large impact on the DPLL
* settings.
*/
/*
* Enable automatic panel scaling so that non-native modes fill the
* screen. Should be enabled before the pipe is enabled, according to
* register description and PRM.
*/
if (mode->hdisplay != adjusted_mode->hdisplay ||
mode->vdisplay != adjusted_mode->vdisplay)
pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
HORIZ_INTERP_BILINEAR);
else
pfit_control = 0;
if (dev_priv->lvds_dither)
pfit_control |= PANEL_8TO6_DITHER_ENABLE;
REG_WRITE(PFIT_CONTROL, pfit_control);
}
/*
* Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
*/
static int psb_intel_lvds_get_modes(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
struct psb_intel_lvds_priv *lvds_priv = gma_encoder->dev_priv;
int ret = 0;
if (!IS_MRST(dev))
ret = psb_intel_ddc_get_modes(connector, &lvds_priv->i2c_bus->adapter);
if (ret)
return ret;
if (mode_dev->panel_fixed_mode != NULL) {
struct drm_display_mode *mode =
drm_mode_duplicate(dev, mode_dev->panel_fixed_mode);
drm_mode_probed_add(connector, mode);
return 1;
}
return 0;
}
/**
* psb_intel_lvds_destroy - unregister and free LVDS structures
* @connector: connector to free
*
* Unregister the DDC bus for this connector then free the driver private
* structure.
*/
void psb_intel_lvds_destroy(struct drm_connector *connector)
{
struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
struct psb_intel_lvds_priv *lvds_priv = gma_encoder->dev_priv;
psb_intel_i2c_destroy(lvds_priv->ddc_bus);
drm_connector_unregister(connector);
drm_connector_cleanup(connector);
kfree(connector);
}
int psb_intel_lvds_set_property(struct drm_connector *connector,
struct drm_property *property,
uint64_t value)
{
struct drm_encoder *encoder = connector->encoder;
if (!encoder)
return -1;
if (!strcmp(property->name, "scaling mode")) {
struct gma_crtc *crtc = to_gma_crtc(encoder->crtc);
uint64_t curval;
if (!crtc)
goto set_prop_error;
switch (value) {
case DRM_MODE_SCALE_FULLSCREEN:
break;
case DRM_MODE_SCALE_NO_SCALE:
break;
case DRM_MODE_SCALE_ASPECT:
break;
default:
goto set_prop_error;
}
if (drm_object_property_get_value(&connector->base,
property,
&curval))
goto set_prop_error;
if (curval == value)
goto set_prop_done;
if (drm_object_property_set_value(&connector->base,
property,
value))
goto set_prop_error;
if (crtc->saved_mode.hdisplay != 0 &&
crtc->saved_mode.vdisplay != 0) {
if (!drm_crtc_helper_set_mode(encoder->crtc,
&crtc->saved_mode,
encoder->crtc->x,
encoder->crtc->y,
encoder->crtc->primary->fb))
goto set_prop_error;
}
} else if (!strcmp(property->name, "backlight")) {
if (drm_object_property_set_value(&connector->base,
property,
value))
goto set_prop_error;
else
gma_backlight_set(encoder->dev, value);
} else if (!strcmp(property->name, "DPMS")) {
const struct drm_encoder_helper_funcs *hfuncs
= encoder->helper_private;
hfuncs->dpms(encoder, value);
}
set_prop_done:
return 0;
set_prop_error:
return -1;
}
static const struct drm_encoder_helper_funcs psb_intel_lvds_helper_funcs = {
.dpms = psb_intel_lvds_encoder_dpms,
.mode_fixup = psb_intel_lvds_mode_fixup,
.prepare = psb_intel_lvds_prepare,
.mode_set = psb_intel_lvds_mode_set,
.commit = psb_intel_lvds_commit,
};
const struct drm_connector_helper_funcs
psb_intel_lvds_connector_helper_funcs = {
.get_modes = psb_intel_lvds_get_modes,
.mode_valid = psb_intel_lvds_mode_valid,
.best_encoder = gma_best_encoder,
};
const struct drm_connector_funcs psb_intel_lvds_connector_funcs = {
.dpms = drm_helper_connector_dpms,
.fill_modes = drm_helper_probe_single_connector_modes,
.set_property = psb_intel_lvds_set_property,
.destroy = psb_intel_lvds_destroy,
};
static void psb_intel_lvds_enc_destroy(struct drm_encoder *encoder)
{
drm_encoder_cleanup(encoder);
}
const struct drm_encoder_funcs psb_intel_lvds_enc_funcs = {
.destroy = psb_intel_lvds_enc_destroy,
};
/**
* psb_intel_lvds_init - setup LVDS connectors on this device
* @dev: drm device
*
* Create the connector, register the LVDS DDC bus, and try to figure out what
* modes we can display on the LVDS panel (if present).
*/
void psb_intel_lvds_init(struct drm_device *dev,
struct psb_intel_mode_device *mode_dev)
{
struct gma_encoder *gma_encoder;
struct gma_connector *gma_connector;
struct psb_intel_lvds_priv *lvds_priv;
struct drm_connector *connector;
struct drm_encoder *encoder;
struct drm_display_mode *scan; /* *modes, *bios_mode; */
struct drm_crtc *crtc;
struct drm_psb_private *dev_priv = dev->dev_private;
u32 lvds;
int pipe;
gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL);
if (!gma_encoder) {
dev_err(dev->dev, "gma_encoder allocation error\n");
return;
}
gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL);
if (!gma_connector) {
dev_err(dev->dev, "gma_connector allocation error\n");
goto failed_encoder;
}
lvds_priv = kzalloc(sizeof(struct psb_intel_lvds_priv), GFP_KERNEL);
if (!lvds_priv) {
dev_err(dev->dev, "LVDS private allocation error\n");
goto failed_connector;
}
gma_encoder->dev_priv = lvds_priv;
connector = &gma_connector->base;
gma_connector->save = psb_intel_lvds_save;
gma_connector->restore = psb_intel_lvds_restore;
encoder = &gma_encoder->base;
drm_connector_init(dev, connector,
&psb_intel_lvds_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
drm_encoder_init(dev, encoder,
&psb_intel_lvds_enc_funcs,
DRM_MODE_ENCODER_LVDS, NULL);
gma_connector_attach_encoder(gma_connector, gma_encoder);
gma_encoder->type = INTEL_OUTPUT_LVDS;
drm_encoder_helper_add(encoder, &psb_intel_lvds_helper_funcs);
drm_connector_helper_add(connector,
&psb_intel_lvds_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
/*Attach connector properties*/
drm_object_attach_property(&connector->base,
dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_FULLSCREEN);
drm_object_attach_property(&connector->base,
dev_priv->backlight_property,
BRIGHTNESS_MAX_LEVEL);
/*
* Set up I2C bus
* FIXME: distroy i2c_bus when exit
*/
lvds_priv->i2c_bus = psb_intel_i2c_create(dev, GPIOB, "LVDSBLC_B");
if (!lvds_priv->i2c_bus) {
dev_printk(KERN_ERR,
&dev->pdev->dev, "I2C bus registration failed.\n");
goto failed_blc_i2c;
}
lvds_priv->i2c_bus->slave_addr = 0x2C;
dev_priv->lvds_i2c_bus = lvds_priv->i2c_bus;
/*
* LVDS discovery:
* 1) check for EDID on DDC
* 2) check for VBT data
* 3) check to see if LVDS is already on
* if none of the above, no panel
* 4) make sure lid is open
* if closed, act like it's not there for now
*/
/* Set up the DDC bus. */
lvds_priv->ddc_bus = psb_intel_i2c_create(dev, GPIOC, "LVDSDDC_C");
if (!lvds_priv->ddc_bus) {
dev_printk(KERN_ERR, &dev->pdev->dev,
"DDC bus registration " "failed.\n");
goto failed_ddc;
}
/*
* Attempt to get the fixed panel mode from DDC. Assume that the
* preferred mode is the right one.
*/
mutex_lock(&dev->mode_config.mutex);
psb_intel_ddc_get_modes(connector, &lvds_priv->ddc_bus->adapter);
list_for_each_entry(scan, &connector->probed_modes, head) {
if (scan->type & DRM_MODE_TYPE_PREFERRED) {
mode_dev->panel_fixed_mode =
drm_mode_duplicate(dev, scan);
goto out; /* FIXME: check for quirks */
}
}
/* Failed to get EDID, what about VBT? do we need this? */
if (mode_dev->vbt_mode)
mode_dev->panel_fixed_mode =
drm_mode_duplicate(dev, mode_dev->vbt_mode);
if (!mode_dev->panel_fixed_mode)
if (dev_priv->lfp_lvds_vbt_mode)
mode_dev->panel_fixed_mode =
drm_mode_duplicate(dev,
dev_priv->lfp_lvds_vbt_mode);
/*
* If we didn't get EDID, try checking if the panel is already turned
* on. If so, assume that whatever is currently programmed is the
* correct mode.
*/
lvds = REG_READ(LVDS);
pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
crtc = psb_intel_get_crtc_from_pipe(dev, pipe);
if (crtc && (lvds & LVDS_PORT_EN)) {
mode_dev->panel_fixed_mode =
psb_intel_crtc_mode_get(dev, crtc);
if (mode_dev->panel_fixed_mode) {
mode_dev->panel_fixed_mode->type |=
DRM_MODE_TYPE_PREFERRED;
goto out; /* FIXME: check for quirks */
}
}
/* If we still don't have a mode after all that, give up. */
if (!mode_dev->panel_fixed_mode) {
dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n");
goto failed_find;
}
/*
* Blacklist machines with BIOSes that list an LVDS panel without
* actually having one.
*/
out:
mutex_unlock(&dev->mode_config.mutex);
drm_connector_register(connector);
return;
failed_find:
mutex_unlock(&dev->mode_config.mutex);
psb_intel_i2c_destroy(lvds_priv->ddc_bus);
failed_ddc:
psb_intel_i2c_destroy(lvds_priv->i2c_bus);
failed_blc_i2c:
drm_encoder_cleanup(encoder);
drm_connector_cleanup(connector);
failed_connector:
kfree(gma_connector);
failed_encoder:
kfree(gma_encoder);
}