linux-stable/arch/x86/kernel/mmconf-fam10h_64.c
Paul Gortmaker 148f9bb877 x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/x86 uses of the __cpuinit macros from
all C files.  x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:56 -04:00

237 lines
5.3 KiB
C

/*
* AMD Family 10h mmconfig enablement
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/dmi.h>
#include <linux/range.h>
#include <asm/pci-direct.h>
#include <linux/sort.h>
#include <asm/io.h>
#include <asm/msr.h>
#include <asm/acpi.h>
#include <asm/mmconfig.h>
#include <asm/pci_x86.h>
struct pci_hostbridge_probe {
u32 bus;
u32 slot;
u32 vendor;
u32 device;
};
static u64 fam10h_pci_mmconf_base;
static struct pci_hostbridge_probe pci_probes[] = {
{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
{ 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 },
};
static int cmp_range(const void *x1, const void *x2)
{
const struct range *r1 = x1;
const struct range *r2 = x2;
int start1, start2;
start1 = r1->start >> 32;
start2 = r2->start >> 32;
return start1 - start2;
}
#define MMCONF_UNIT (1ULL << FAM10H_MMIO_CONF_BASE_SHIFT)
#define MMCONF_MASK (~(MMCONF_UNIT - 1))
#define MMCONF_SIZE (MMCONF_UNIT << 8)
/* need to avoid (0xfd<<32), (0xfe<<32), and (0xff<<32), ht used space */
#define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32)
#define BASE_VALID(b) ((b) + MMCONF_SIZE <= (0xfdULL<<32) || (b) >= (1ULL<<40))
static void get_fam10h_pci_mmconf_base(void)
{
int i;
unsigned bus;
unsigned slot;
int found;
u64 val;
u32 address;
u64 tom2;
u64 base = FAM10H_PCI_MMCONF_BASE;
int hi_mmio_num;
struct range range[8];
/* only try to get setting from BSP */
if (fam10h_pci_mmconf_base)
return;
if (!early_pci_allowed())
return;
found = 0;
for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
u32 id;
u16 device;
u16 vendor;
bus = pci_probes[i].bus;
slot = pci_probes[i].slot;
id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
vendor = id & 0xffff;
device = (id>>16) & 0xffff;
if (pci_probes[i].vendor == vendor &&
pci_probes[i].device == device) {
found = 1;
break;
}
}
if (!found)
return;
/* SYS_CFG */
address = MSR_K8_SYSCFG;
rdmsrl(address, val);
/* TOP_MEM2 is not enabled? */
if (!(val & (1<<21))) {
tom2 = 1ULL << 32;
} else {
/* TOP_MEM2 */
address = MSR_K8_TOP_MEM2;
rdmsrl(address, val);
tom2 = max(val & 0xffffff800000ULL, 1ULL << 32);
}
if (base <= tom2)
base = (tom2 + 2 * MMCONF_UNIT - 1) & MMCONF_MASK;
/*
* need to check if the range is in the high mmio range that is
* above 4G
*/
hi_mmio_num = 0;
for (i = 0; i < 8; i++) {
u32 reg;
u64 start;
u64 end;
reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3));
if (!(reg & 3))
continue;
start = (u64)(reg & 0xffffff00) << 8; /* 39:16 on 31:8*/
reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3));
end = ((u64)(reg & 0xffffff00) << 8) | 0xffff; /* 39:16 on 31:8*/
if (end < tom2)
continue;
range[hi_mmio_num].start = start;
range[hi_mmio_num].end = end;
hi_mmio_num++;
}
if (!hi_mmio_num)
goto out;
/* sort the range */
sort(range, hi_mmio_num, sizeof(struct range), cmp_range, NULL);
if (range[hi_mmio_num - 1].end < base)
goto out;
if (range[0].start > base + MMCONF_SIZE)
goto out;
/* need to find one window */
base = (range[0].start & MMCONF_MASK) - MMCONF_UNIT;
if ((base > tom2) && BASE_VALID(base))
goto out;
base = (range[hi_mmio_num - 1].end + MMCONF_UNIT) & MMCONF_MASK;
if (BASE_VALID(base))
goto out;
/* need to find window between ranges */
for (i = 1; i < hi_mmio_num; i++) {
base = (range[i - 1].end + MMCONF_UNIT) & MMCONF_MASK;
val = range[i].start & MMCONF_MASK;
if (val >= base + MMCONF_SIZE && BASE_VALID(base))
goto out;
}
return;
out:
fam10h_pci_mmconf_base = base;
}
void fam10h_check_enable_mmcfg(void)
{
u64 val;
u32 address;
if (!(pci_probe & PCI_CHECK_ENABLE_AMD_MMCONF))
return;
address = MSR_FAM10H_MMIO_CONF_BASE;
rdmsrl(address, val);
/* try to make sure that AP's setting is identical to BSP setting */
if (val & FAM10H_MMIO_CONF_ENABLE) {
unsigned busnbits;
busnbits = (val >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
FAM10H_MMIO_CONF_BUSRANGE_MASK;
/* only trust the one handle 256 buses, if acpi=off */
if (!acpi_pci_disabled || busnbits >= 8) {
u64 base = val & MMCONF_MASK;
if (!fam10h_pci_mmconf_base) {
fam10h_pci_mmconf_base = base;
return;
} else if (fam10h_pci_mmconf_base == base)
return;
}
}
/*
* if it is not enabled, try to enable it and assume only one segment
* with 256 buses
*/
get_fam10h_pci_mmconf_base();
if (!fam10h_pci_mmconf_base) {
pci_probe &= ~PCI_CHECK_ENABLE_AMD_MMCONF;
return;
}
printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n");
val &= ~((FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT) |
(FAM10H_MMIO_CONF_BUSRANGE_MASK<<FAM10H_MMIO_CONF_BUSRANGE_SHIFT));
val |= fam10h_pci_mmconf_base | (8 << FAM10H_MMIO_CONF_BUSRANGE_SHIFT) |
FAM10H_MMIO_CONF_ENABLE;
wrmsrl(address, val);
}
static int __init set_check_enable_amd_mmconf(const struct dmi_system_id *d)
{
pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
return 0;
}
static const struct dmi_system_id __initconst mmconf_dmi_table[] = {
{
.callback = set_check_enable_amd_mmconf,
.ident = "Sun Microsystems Machine",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"),
},
},
{}
};
/* Called from a non __init function, but only on the BSP. */
void __ref check_enable_amd_mmconf_dmi(void)
{
dmi_check_system(mmconf_dmi_table);
}