linux-stable/drivers/Makefile
Linus Torvalds 88a99886c2 This is the bulk of pin control changes for the v4.3 development
cycle
 
 Core changes:
 
 - It is possible configure groups in debugfs.
 
 - Consolidation of chained IRQ handler install/remove replacing
   all call sites where irq_set_handler_data() and
   irq_set_chained_handler() were done in succession with a
   combined call to irq_set_chained_handler_and_data(). This
   series was created by Thomas Gleixner after the problem was
   observed by Russell King.
 
 - Tglx also made another series of patches switching
   __irq_set_handler_locked() for irq_set_handler_locked() which
   is way cleaner.
 
 - Tglx also wrote a good bunch of patches to make use of
   irq_desc_get_xxx() accessors and avoid looking up irq_descs
   from IRQ numbers. The goal is to get rid of the irq number
   from the handlers in the IRQ flow which is nice.
 
 Driver feature enhancements:
 
 - Power management support for the SiRF SoC Atlas 7.
 
 - Power down support for the Qualcomm driver.
 
 - Intel Cherryview and Baytrail: switch drivers to use raw
   spinlocks in IRQ handlers to play nice with the realtime
   patch set.
 
 - Rework and new modes handling for Qualcomm SPMI-MPP.
 
 - Pinconf power source config for SH PFC.
 
 New drivers and subdrivers:
 
 - A new driver for Conexant Digicolor CX92755.
 
 - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8,
   PH1-Pro5, ProXtream2 and PH1-LD6b SoC pin control support.
 
 - Reverse-egineered the S/PDIF settings for the Allwinner
   sun4i driver.
 
 - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs
 
 - A new Freescale i.mx6ul subdriver.
 
 Cleanup:
 
 - Remove platform data support in a number of SH PFC
   subdrivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV6YzgAAoJEEEQszewGV1zbIAQAILzMrzWkxsy7bhvL4QdP5/K
 OG3EodE//AE0G5gKugUDjg5t2lftdiIJVhjDA17ruETCSciuAxZSLThlMy1sQgyN
 LPxy9LlCrmsqrYt9+fmJ9js8j52RBJikKK0RUyUVz0VojTBplRpElyEx/KxwM5sG
 Hy3+hU61uKO0j9AyIcsa/RKP6SGavwZdHytJBsHNw+pODyE3UZCf52ChAVBsTPfE
 MV70g3Qzfqur7ZFqcNgtUV7qCyYvlF12ooiihrGFDOsTL3sSq4/OXB7z1z1mGGHL
 Dgq8pXJ6EIZlCbk+jFMTzPRSzy46dxNai0eErjTUVEldH1tOphzGMvKmOdm/nczH
 4M/UOWOKBE1aOYZNPtnUgDy2MRt5K9VJStCNSHEQCB2lGdojNAtmj2cmr8flBN5m
 gM9FDpIS1/C+OYYTkOY9ftPsH5zOk7sCLEHSH5USYRGJHihzLnkV90eiN6a7vlF1
 hyTGrIyl6e//E5JBgamjnR3+fYuxQGr6WeAZEP/gXZRm7BCKCaPwCarq+kPZVG4A
 nolZ/QQN6XYPSlveSPU97VYvLYEUvXaKN0Hf2DTbwkqvNFp7JORD65QLESPtQoIp
 x95iHMdB/1+0OfgOqMmlOtKpOKREeQ/R+KWACxsrr5Rfv3/7CP4BMRGypIZ/iPmz
 HWoyDI4lIebBR+JnjMjK
 =4QFX
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.3 development
  cycle.

  Like with GPIO it's a lot of stuff.  If my subsystems are any sign of
  the overall tempo of the kernel v4.3 will be a gigantic diff.

[ It looks like 4.3 is calmer than 4.2 in most other subsystems, but
  we'll see - Linus ]

  Core changes:

   - It is possible configure groups in debugfs.

   - Consolidation of chained IRQ handler install/remove replacing all
     call sites where irq_set_handler_data() and
     irq_set_chained_handler() were done in succession with a combined
     call to irq_set_chained_handler_and_data().  This series was
     created by Thomas Gleixner after the problem was observed by
     Russell King.

   - Tglx also made another series of patches switching
     __irq_set_handler_locked() for irq_set_handler_locked() which is
     way cleaner.

   - Tglx also wrote a good bunch of patches to make use of
     irq_desc_get_xxx() accessors and avoid looking up irq_descs from
     IRQ numbers.  The goal is to get rid of the irq number from the
     handlers in the IRQ flow which is nice.

  Driver feature enhancements:

   - Power management support for the SiRF SoC Atlas 7.

   - Power down support for the Qualcomm driver.

   - Intel Cherryview and Baytrail: switch drivers to use raw spinlocks
     in IRQ handlers to play nice with the realtime patch set.

   - Rework and new modes handling for Qualcomm SPMI-MPP.

   - Pinconf power source config for SH PFC.

  New drivers and subdrivers:

   - A new driver for Conexant Digicolor CX92755.

   - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5,
     ProXtream2 and PH1-LD6b SoC pin control support.

   - Reverse-egineered the S/PDIF settings for the Allwinner sun4i
     driver.

   - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs

   - A new Freescale i.mx6ul subdriver.

  Cleanup:

   - Remove platform data support in a number of SH PFC subdrivers"

* tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (95 commits)
  pinctrl: at91: fix null pointer dereference
  pinctrl: mediatek: Implement wake handler and suspend resume
  pinctrl: mediatek: Fix multiple registration issue.
  pinctrl: sh-pfc: r8a7794: add USB pin groups
  pinctrl: at91: Use generic irq_{request,release}_resources()
  pinctrl: cherryview: Use raw_spinlock for locking
  pinctrl: baytrail: Use raw_spinlock for locking
  pinctrl: imx6ul: Remove .owner field
  pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grp
  pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching
  clk: rockchip: add pclk_pd_pmu to the list of rk3288 critical clocks
  pinctrl: sun4i: add spdif to pin description.
  pinctrl: atlas7: clear ugly branch statements for pull and drivestrength
  pinctrl: baytrail: Serialize all register access
  pinctrl: baytrail: Drop FSF mailing address
  pinctrl: rockchip: only enable gpio clock when it setting
  pinctrl/mediatek: fix spelling mistake in dev_err error message
  pinctrl: cherryview: Serialize all register access
  pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting
  pinctrl: nomadik: reflect current input value
  ...
2015-09-04 10:22:09 -07:00

169 lines
4.8 KiB
Makefile

#
# Makefile for the Linux kernel device drivers.
#
# 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
# Rewritten to use lists instead of if-statements.
#
obj-y += irqchip/
obj-y += bus/
obj-$(CONFIG_GENERIC_PHY) += phy/
# GPIO must come after pinctrl as gpios may need to mux pins etc
obj-$(CONFIG_PINCTRL) += pinctrl/
obj-y += gpio/
obj-y += pwm/
obj-$(CONFIG_PCI) += pci/
obj-$(CONFIG_PARISC) += parisc/
obj-$(CONFIG_RAPIDIO) += rapidio/
obj-y += video/
obj-y += idle/
# IPMI must come before ACPI in order to provide IPMI opregion support
obj-$(CONFIG_IPMI_HANDLER) += char/ipmi/
obj-$(CONFIG_ACPI) += acpi/
obj-$(CONFIG_SFI) += sfi/
# PnP must come after ACPI since it will eventually need to check if acpi
# was used and do nothing if so
obj-$(CONFIG_PNP) += pnp/
obj-y += amba/
# Many drivers will want to use DMA so this has to be made available
# really early.
obj-$(CONFIG_DMADEVICES) += dma/
# SOC specific infrastructure drivers.
obj-y += soc/
obj-$(CONFIG_VIRTIO) += virtio/
obj-$(CONFIG_XEN) += xen/
# regulators early, since some subsystems rely on them to initialize
obj-$(CONFIG_REGULATOR) += regulator/
# reset controllers early, since gpu drivers might rely on them to initialize
obj-$(CONFIG_RESET_CONTROLLER) += reset/
# tty/ comes before char/ so that the VT console is the boot-time
# default.
obj-y += tty/
obj-y += char/
# iommu/ comes before gpu as gpu are using iommu controllers
obj-$(CONFIG_IOMMU_SUPPORT) += iommu/
# gpu/ comes after char for AGP vs DRM startup and after iommu
obj-y += gpu/
obj-$(CONFIG_CONNECTOR) += connector/
# i810fb and intelfb depend on char/agp/
obj-$(CONFIG_FB_I810) += video/fbdev/i810/
obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
obj-$(CONFIG_PARPORT) += parport/
obj-y += base/ block/ misc/ mfd/ nfc/
obj-$(CONFIG_LIBNVDIMM) += nvdimm/
obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
obj-$(CONFIG_NUBUS) += nubus/
obj-y += macintosh/
obj-$(CONFIG_IDE) += ide/
obj-$(CONFIG_SCSI) += scsi/
obj-$(CONFIG_ATA) += ata/
obj-$(CONFIG_TARGET_CORE) += target/
obj-$(CONFIG_MTD) += mtd/
obj-$(CONFIG_SPI) += spi/
obj-$(CONFIG_SPMI) += spmi/
obj-y += hsi/
obj-y += net/
obj-$(CONFIG_ATM) += atm/
obj-$(CONFIG_FUSION) += message/
obj-y += firewire/
obj-$(CONFIG_UIO) += uio/
obj-$(CONFIG_VFIO) += vfio/
obj-y += cdrom/
obj-y += auxdisplay/
obj-$(CONFIG_PCCARD) += pcmcia/
obj-$(CONFIG_DIO) += dio/
obj-$(CONFIG_SBUS) += sbus/
obj-$(CONFIG_ZORRO) += zorro/
obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/
obj-$(CONFIG_PARIDE) += block/paride/
obj-$(CONFIG_TC) += tc/
obj-$(CONFIG_UWB) += uwb/
obj-$(CONFIG_USB_PHY) += usb/
obj-$(CONFIG_USB) += usb/
obj-$(CONFIG_PCI) += usb/
obj-$(CONFIG_USB_GADGET) += usb/
obj-$(CONFIG_SERIO) += input/serio/
obj-$(CONFIG_GAMEPORT) += input/gameport/
obj-$(CONFIG_INPUT) += input/
obj-$(CONFIG_RTC_LIB) += rtc/
obj-y += i2c/ media/
obj-$(CONFIG_PPS) += pps/
obj-$(CONFIG_PTP_1588_CLOCK) += ptp/
obj-$(CONFIG_W1) += w1/
obj-$(CONFIG_POWER_SUPPLY) += power/
obj-$(CONFIG_HWMON) += hwmon/
obj-$(CONFIG_THERMAL) += thermal/
obj-$(CONFIG_WATCHDOG) += watchdog/
obj-$(CONFIG_MD) += md/
obj-$(CONFIG_BT) += bluetooth/
obj-$(CONFIG_ACCESSIBILITY) += accessibility/
obj-$(CONFIG_ISDN) += isdn/
obj-$(CONFIG_EDAC) += edac/
obj-$(CONFIG_EISA) += eisa/
obj-y += lguest/
obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_CPU_IDLE) += cpuidle/
obj-y += mmc/
obj-$(CONFIG_MEMSTICK) += memstick/
obj-y += leds/
obj-$(CONFIG_INFINIBAND) += infiniband/
obj-$(CONFIG_SGI_SN) += sn/
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
obj-$(CONFIG_SUPERH) += sh/
obj-$(CONFIG_ARCH_SHMOBILE) += sh/
ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
obj-y += clocksource/
endif
obj-$(CONFIG_DCA) += dca/
obj-$(CONFIG_HID) += hid/
obj-$(CONFIG_PPC_PS3) += ps3/
obj-$(CONFIG_OF) += of/
obj-$(CONFIG_SSB) += ssb/
obj-$(CONFIG_BCMA) += bcma/
obj-$(CONFIG_VHOST_RING) += vhost/
obj-$(CONFIG_VLYNQ) += vlynq/
obj-$(CONFIG_STAGING) += staging/
obj-y += platform/
#common clk code
obj-y += clk/
obj-$(CONFIG_MAILBOX) += mailbox/
obj-$(CONFIG_HWSPINLOCK) += hwspinlock/
obj-$(CONFIG_REMOTEPROC) += remoteproc/
obj-$(CONFIG_RPMSG) += rpmsg/
# Virtualization drivers
obj-$(CONFIG_VIRT_DRIVERS) += virt/
obj-$(CONFIG_HYPERV) += hv/
obj-$(CONFIG_PM_DEVFREQ) += devfreq/
obj-$(CONFIG_EXTCON) += extcon/
obj-$(CONFIG_MEMORY) += memory/
obj-$(CONFIG_IIO) += iio/
obj-$(CONFIG_VME_BUS) += vme/
obj-$(CONFIG_IPACK_BUS) += ipack/
obj-$(CONFIG_NTB) += ntb/
obj-$(CONFIG_FMC) += fmc/
obj-$(CONFIG_POWERCAP) += powercap/
obj-$(CONFIG_MCB) += mcb/
obj-$(CONFIG_PERF_EVENTS) += perf/
obj-$(CONFIG_RAS) += ras/
obj-$(CONFIG_THUNDERBOLT) += thunderbolt/
obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/
obj-$(CONFIG_ANDROID) += android/
obj-$(CONFIG_NVMEM) += nvmem/