linux-stable/sound/soc/sof/ipc4-topology.h
Jyri Sarha ca5ce0caa6
ASoC: SOF: ipc4/intel: Add support for chained DMA
Add logic for setting up and tearing down chained DMA connections.

Since pipelines are not used, all the logic to set the pipeline states
can be bypassed, with only the DMA programming sequences remaining. In
addition the same format needs to be used for host- and link-DMA,
without the usual fixup to use the S32_LE format on the link.

Note however that for convenience and compatibility with existing
definitions, the topology relies on the concept of pipelines with a
'USE_CHAIN_DMA' token indicating that all the logic shall be bypassed.

Unlike 'normal' ALSA sequences, the chain DMA is not programmed in
hw_params/hw_free. The IPC message to set-up and tear-down chained DMA
are sent in sof_ipc4_trigger_pipelines(), but the contents prepared
earlier.

Chained DMA is only supported by the Intel HDA DAI for now, and only
S16_LE and S32_LE formats are supported for now.

Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230321092654.7292-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-21 12:13:31 +00:00

397 lines
12 KiB
C

/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* Copyright(c) 2022 Intel Corporation. All rights reserved.
*/
#ifndef __INCLUDE_SOUND_SOF_IPC4_TOPOLOGY_H__
#define __INCLUDE_SOUND_SOF_IPC4_TOPOLOGY_H__
#include <sound/sof/ipc4/header.h>
#define SOF_IPC4_FW_PAGE_SIZE BIT(12)
#define SOF_IPC4_FW_PAGE(x) ((((x) + BIT(12) - 1) & ~(BIT(12) - 1)) >> 12)
#define SOF_IPC4_FW_ROUNDUP(x) (((x) + BIT(6) - 1) & (~(BIT(6) - 1)))
#define SOF_IPC4_MODULE_LOAD_TYPE GENMASK(3, 0)
#define SOF_IPC4_MODULE_AUTO_START BIT(4)
/*
* Two module schedule domains in fw :
* LL domain - Low latency domain
* DP domain - Data processing domain
* The LL setting should be equal to !DP setting
*/
#define SOF_IPC4_MODULE_LL BIT(5)
#define SOF_IPC4_MODULE_DP BIT(6)
#define SOF_IPC4_MODULE_LIB_CODE BIT(7)
#define SOF_IPC4_MODULE_INIT_CONFIG_MASK GENMASK(11, 8)
#define SOF_IPC4_MODULE_INIT_CONFIG_TYPE_BASE_CFG 0
#define SOF_IPC4_MODULE_INIT_CONFIG_TYPE_BASE_CFG_WITH_EXT 1
#define SOF_IPC4_MODULE_INSTANCE_LIST_ITEM_SIZE 12
#define SOF_IPC4_PIPELINE_OBJECT_SIZE 448
#define SOF_IPC4_DATA_QUEUE_OBJECT_SIZE 128
#define SOF_IPC4_LL_TASK_OBJECT_SIZE 72
#define SOF_IPC4_DP_TASK_OBJECT_SIZE 104
#define SOF_IPC4_DP_TASK_LIST_SIZE (12 + 8)
#define SOF_IPC4_LL_TASK_LIST_ITEM_SIZE 12
#define SOF_IPC4_FW_MAX_PAGE_COUNT 20
#define SOF_IPC4_FW_MAX_QUEUE_COUNT 8
/* Node index and mask applicable for host copier and ALH/HDA type DAI copiers */
#define SOF_IPC4_NODE_INDEX_MASK 0xFF
#define SOF_IPC4_NODE_INDEX(x) ((x) & SOF_IPC4_NODE_INDEX_MASK)
#define SOF_IPC4_NODE_TYPE(x) ((x) << 8)
/* Node ID for SSP type DAI copiers */
#define SOF_IPC4_NODE_INDEX_INTEL_SSP(x) (((x) & 0xf) << 4)
/* Node ID for DMIC type DAI copiers */
#define SOF_IPC4_NODE_INDEX_INTEL_DMIC(x) ((x) & 0x7)
#define SOF_IPC4_GAIN_ALL_CHANNELS_MASK 0xffffffff
#define SOF_IPC4_VOL_ZERO_DB 0x7fffffff
#define ALH_MAX_NUMBER_OF_GTW 16
#define SOF_IPC4_INVALID_NODE_ID 0xffffffff
/* FW requires minimum 2ms DMA buffer size */
#define SOF_IPC4_MIN_DMA_BUFFER_SIZE 2
/*
* The base of multi-gateways. Multi-gateways addressing starts from
* ALH_MULTI_GTW_BASE and there are ALH_MULTI_GTW_COUNT multi-sources
* and ALH_MULTI_GTW_COUNT multi-sinks available.
* Addressing is continuous from ALH_MULTI_GTW_BASE to
* ALH_MULTI_GTW_BASE + ALH_MULTI_GTW_COUNT - 1.
*/
#define ALH_MULTI_GTW_BASE 0x50
/* A magic number from FW */
#define ALH_MULTI_GTW_COUNT 8
enum sof_ipc4_copier_module_config_params {
/*
* Use LARGE_CONFIG_SET to initialize timestamp event. Ipc mailbox must
* contain properly built CopierConfigTimestampInitData struct.
*/
SOF_IPC4_COPIER_MODULE_CFG_PARAM_TIMESTAMP_INIT = 1,
/*
* Use LARGE_CONFIG_SET to initialize copier sink. Ipc mailbox must contain
* properly built CopierConfigSetSinkFormat struct.
*/
SOF_IPC4_COPIER_MODULE_CFG_PARAM_SET_SINK_FORMAT,
/*
* Use LARGE_CONFIG_SET to initialize and enable on Copier data segment
* event. Ipc mailbox must contain properly built DataSegmentEnabled struct.
*/
SOF_IPC4_COPIER_MODULE_CFG_PARAM_DATA_SEGMENT_ENABLED,
/*
* Use LARGE_CONFIG_GET to retrieve Linear Link Position (LLP) value for non
* HD-A gateways.
*/
SOF_IPC4_COPIER_MODULE_CFG_PARAM_LLP_READING,
/*
* Use LARGE_CONFIG_GET to retrieve Linear Link Position (LLP) value for non
* HD-A gateways and corresponding total processed data
*/
SOF_IPC4_COPIER_MODULE_CFG_PARAM_LLP_READING_EXTENDED,
/*
* Use LARGE_CONFIG_SET to setup attenuation on output pins. Data is just uint32_t.
* note Config is only allowed when output pin is set up for 32bit and source
* is connected to Gateway
*/
SOF_IPC4_COPIER_MODULE_CFG_ATTENUATION,
};
struct sof_ipc4_copier_config_set_sink_format {
/* Id of sink */
u32 sink_id;
/*
* Input format used by the source
* attention must be the same as present if already initialized.
*/
struct sof_ipc4_audio_format source_fmt;
/* Output format used by the sink */
struct sof_ipc4_audio_format sink_fmt;
} __packed __aligned(4);
/**
* struct sof_ipc4_pipeline - pipeline config data
* @priority: Priority of this pipeline
* @lp_mode: Low power mode
* @mem_usage: Memory usage
* @core_id: Target core for the pipeline
* @state: Pipeline state
* @use_chain_dma: flag to indicate if the firmware shall use chained DMA
* @msg: message structure for pipeline
* @skip_during_fe_trigger: skip triggering this pipeline during the FE DAI trigger
*/
struct sof_ipc4_pipeline {
uint32_t priority;
uint32_t lp_mode;
uint32_t mem_usage;
uint32_t core_id;
int state;
bool use_chain_dma;
struct sof_ipc4_msg msg;
bool skip_during_fe_trigger;
};
/**
* struct sof_ipc4_multi_pipeline_data - multi pipeline trigger IPC data
* @count: Number of pipelines to be triggered
* @pipeline_ids: Flexible array of IDs of the pipelines to be triggered
*/
struct ipc4_pipeline_set_state_data {
u32 count;
DECLARE_FLEX_ARRAY(u32, pipeline_ids);
} __packed;
/**
* struct sof_ipc4_pin_format - Module pin format
* @pin_index: pin index
* @buffer_size: buffer size in bytes
* @audio_fmt: audio format for the pin
*
* This structure can be used for both output or input pins and the pin_index is relative to the
* pin type i.e output/input pin
*/
struct sof_ipc4_pin_format {
u32 pin_index;
u32 buffer_size;
struct sof_ipc4_audio_format audio_fmt;
};
/**
* struct sof_ipc4_available_audio_format - Available audio formats
* @output_pin_fmts: Available output pin formats
* @input_pin_fmts: Available input pin formats
* @num_input_formats: Number of input pin formats
* @num_output_formats: Number of output pin formats
*/
struct sof_ipc4_available_audio_format {
struct sof_ipc4_pin_format *output_pin_fmts;
struct sof_ipc4_pin_format *input_pin_fmts;
u32 num_input_formats;
u32 num_output_formats;
};
/**
* struct sof_copier_gateway_cfg - IPC gateway configuration
* @node_id: ID of Gateway Node
* @dma_buffer_size: Preferred Gateway DMA buffer size (in bytes)
* @config_length: Length of gateway node configuration blob specified in #config_data
* config_data: Gateway node configuration blob
*/
struct sof_copier_gateway_cfg {
uint32_t node_id;
uint32_t dma_buffer_size;
uint32_t config_length;
uint32_t config_data[];
};
/**
* struct sof_ipc4_copier_data - IPC data for copier
* @base_config: Base configuration including input audio format
* @out_format: Output audio format
* @copier_feature_mask: Copier feature mask
* @gtw_cfg: Gateway configuration
*/
struct sof_ipc4_copier_data {
struct sof_ipc4_base_module_cfg base_config;
struct sof_ipc4_audio_format out_format;
uint32_t copier_feature_mask;
struct sof_copier_gateway_cfg gtw_cfg;
};
/**
* struct sof_ipc4_gtw_attributes: Gateway attributes
* @lp_buffer_alloc: Gateway data requested in low power memory
* @alloc_from_reg_file: Gateway data requested in register file memory
* @rsvd: reserved for future use
*/
struct sof_ipc4_gtw_attributes {
uint32_t lp_buffer_alloc : 1;
uint32_t alloc_from_reg_file : 1;
uint32_t rsvd : 30;
};
/** struct sof_ipc4_alh_multi_gtw_cfg: ALH gateway cfg data
* @count: Number of streams (valid items in mapping array)
* @alh_id: ALH stream id of a single ALH stream aggregated
* @channel_mask: Channel mask
* @mapping: ALH streams
*/
struct sof_ipc4_alh_multi_gtw_cfg {
uint32_t count;
struct {
uint32_t alh_id;
uint32_t channel_mask;
} mapping[ALH_MAX_NUMBER_OF_GTW];
} __packed;
/** struct sof_ipc4_alh_configuration_blob: ALH blob
* @gw_attr: Gateway attributes
* @alh_cfg: ALH configuration data
*/
struct sof_ipc4_alh_configuration_blob {
struct sof_ipc4_gtw_attributes gw_attr;
struct sof_ipc4_alh_multi_gtw_cfg alh_cfg;
};
/**
* struct sof_ipc4_copier - copier config data
* @data: IPC copier data
* @copier_config: Copier + blob
* @ipc_config_size: Size of copier_config
* @available_fmt: Available audio format
* @frame_fmt: frame format
* @msg: message structure for copier
* @gtw_attr: Gateway attributes for copier blob
* @dai_type: DAI type
* @dai_index: DAI index
*/
struct sof_ipc4_copier {
struct sof_ipc4_copier_data data;
u32 *copier_config;
uint32_t ipc_config_size;
void *ipc_config_data;
struct sof_ipc4_available_audio_format available_fmt;
u32 frame_fmt;
struct sof_ipc4_msg msg;
struct sof_ipc4_gtw_attributes *gtw_attr;
u32 dai_type;
int dai_index;
};
/**
* struct sof_ipc4_ctrl_value_chan: generic channel mapped value data
* @channel: Channel ID
* @value: gain value
*/
struct sof_ipc4_ctrl_value_chan {
u32 channel;
u32 value;
};
/**
* struct sof_ipc4_control_data - IPC data for kcontrol IO
* @msg: message structure for kcontrol IO
* @index: pipeline ID
* @chanv: channel ID and value array used by volume type controls
* @data: data for binary kcontrols
*/
struct sof_ipc4_control_data {
struct sof_ipc4_msg msg;
int index;
union {
DECLARE_FLEX_ARRAY(struct sof_ipc4_ctrl_value_chan, chanv);
DECLARE_FLEX_ARRAY(struct sof_abi_hdr, data);
};
};
/**
* struct sof_ipc4_gain_data - IPC gain blob
* @channels: Channels
* @init_val: Initial value
* @curve_type: Curve type
* @reserved: reserved for future use
* @curve_duration_l: Curve duration low part
* @curve_duration_h: Curve duration high part
*/
struct sof_ipc4_gain_data {
uint32_t channels;
uint32_t init_val;
uint32_t curve_type;
uint32_t reserved;
uint32_t curve_duration_l;
uint32_t curve_duration_h;
} __aligned(8);
/**
* struct sof_ipc4_gain - gain config data
* @base_config: IPC base config data
* @data: IPC gain blob
* @available_fmt: Available audio format
* @msg: message structure for gain
*/
struct sof_ipc4_gain {
struct sof_ipc4_base_module_cfg base_config;
struct sof_ipc4_gain_data data;
struct sof_ipc4_available_audio_format available_fmt;
struct sof_ipc4_msg msg;
};
/**
* struct sof_ipc4_mixer - mixer config data
* @base_config: IPC base config data
* @available_fmt: Available audio format
* @msg: IPC4 message struct containing header and data info
*/
struct sof_ipc4_mixer {
struct sof_ipc4_base_module_cfg base_config;
struct sof_ipc4_available_audio_format available_fmt;
struct sof_ipc4_msg msg;
};
/**
* struct sof_ipc4_src SRC config data
* @base_config: IPC base config data
* @sink_rate: Output rate for sink module
* @available_fmt: Available audio format
* @msg: IPC4 message struct containing header and data info
*/
struct sof_ipc4_src {
struct sof_ipc4_base_module_cfg base_config;
uint32_t sink_rate;
struct sof_ipc4_available_audio_format available_fmt;
struct sof_ipc4_msg msg;
};
/**
* struct sof_ipc4_base_module_cfg_ext - base module config extension containing the pin format
* information for the module. Both @num_input_pin_fmts and @num_output_pin_fmts cannot be 0 for a
* module.
* @num_input_pin_fmts: number of input pin formats in the @pin_formats array
* @num_output_pin_fmts: number of output pin formats in the @pin_formats array
* @reserved: reserved for future use
* @pin_formats: flexible array consisting of @num_input_pin_fmts input pin format items followed
* by @num_output_pin_fmts output pin format items
*/
struct sof_ipc4_base_module_cfg_ext {
u16 num_input_pin_fmts;
u16 num_output_pin_fmts;
u8 reserved[12];
DECLARE_FLEX_ARRAY(struct sof_ipc4_pin_format, pin_formats);
} __packed;
/**
* struct sof_ipc4_process - process config data
* @base_config: IPC base config data
* @base_config_ext: Base config extension data for module init
* @output_format: Output audio format
* @available_fmt: Available audio format
* @ipc_config_data: Process module config data
* @ipc_config_size: Size of process module config data
* @msg: IPC4 message struct containing header and data info
* @base_config_ext_size: Size of the base config extension data in bytes
* @init_config: Module init config type (SOF_IPC4_MODULE_INIT_CONFIG_TYPE_*)
*/
struct sof_ipc4_process {
struct sof_ipc4_base_module_cfg base_config;
struct sof_ipc4_base_module_cfg_ext *base_config_ext;
struct sof_ipc4_audio_format output_format;
struct sof_ipc4_available_audio_format available_fmt;
void *ipc_config_data;
uint32_t ipc_config_size;
struct sof_ipc4_msg msg;
u32 base_config_ext_size;
u32 init_config;
};
#endif