mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-27 22:51:31 +00:00
Code Issues Releases Wiki Activity
linux-stable/arch/mips/kvm/locore.S
James Hogan b937ff628f MIPS: KVM: Don't hardcode restored HWREna 
KVM modifies CP0_HWREna during guest execution so it can trap and
emulate RDHWR instructions, however it always restores the hardcoded
value 0x2000000F. This assumes the presence of the UserLocal register,
and the absence of any implementation dependent or future HW registers.

Fix by exporting the value that traps.c write into CP0_HWREna, and
loading from there instead of hard coding.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-15 23:58:31 +02:00

602 lines
14 KiB
ArmAsm
Raw Blame History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Main entry point for the guest, exception handling.
*
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
* Authors: Sanjay Lal <sanjayl@kymasys.com>
*/
#include <asm/asm.h>
#include <asm/asmmacro.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
#include <asm/asm-offsets.h>
#define _C_LABEL(x) x
#define MIPSX(name) mips32_ ## name
#define CALLFRAME_SIZ 32
/*
* VECTOR
* exception vector entrypoint
*/
#define VECTOR(x, regmask) \
.ent _C_LABEL(x),0; \
EXPORT(x);
#define VECTOR_END(x) \
EXPORT(x);
/* Overload, Danger Will Robinson!! */
#define PT_HOST_USERLOCAL PT_EPC
#define CP0_DDATA_LO $28,3
/* Resume Flags */
#define RESUME_FLAG_HOST (1<<1) /* Resume host? */
#define RESUME_GUEST 0
#define RESUME_HOST RESUME_FLAG_HOST
/*
* __kvm_mips_vcpu_run: entry point to the guest
* a0: run
* a1: vcpu
*/
.set noreorder
FEXPORT(__kvm_mips_vcpu_run)
/* k0/k1 not being used in host kernel context */
INT_ADDIU k1, sp, -PT_SIZE
LONG_S $16, PT_R16(k1)
LONG_S $17, PT_R17(k1)
LONG_S $18, PT_R18(k1)
LONG_S $19, PT_R19(k1)
LONG_S $20, PT_R20(k1)
LONG_S $21, PT_R21(k1)
LONG_S $22, PT_R22(k1)
LONG_S $23, PT_R23(k1)
LONG_S $28, PT_R28(k1)
LONG_S $29, PT_R29(k1)
LONG_S $30, PT_R30(k1)
LONG_S $31, PT_R31(k1)
/* Save hi/lo */
mflo v0
LONG_S v0, PT_LO(k1)
mfhi v1
LONG_S v1, PT_HI(k1)
/* Save host status */
mfc0 v0, CP0_STATUS
LONG_S v0, PT_STATUS(k1)
/* Save DDATA_LO, will be used to store pointer to vcpu */
mfc0 v1, CP0_DDATA_LO
LONG_S v1, PT_HOST_USERLOCAL(k1)
/* DDATA_LO has pointer to vcpu */
mtc0 a1, CP0_DDATA_LO
/* Offset into vcpu->arch */
INT_ADDIU k1, a1, VCPU_HOST_ARCH
/*
* Save the host stack to VCPU, used for exception processing
* when we exit from the Guest
*/
LONG_S sp, VCPU_HOST_STACK(k1)
/* Save the kernel gp as well */
LONG_S gp, VCPU_HOST_GP(k1)
/*
* Setup status register for running the guest in UM, interrupts
* are disabled
*/
li k0, (ST0_EXL | KSU_USER | ST0_BEV)
mtc0 k0, CP0_STATUS
ehb
/* load up the new EBASE */
LONG_L k0, VCPU_GUEST_EBASE(k1)
mtc0 k0, CP0_EBASE
/*
* Now that the new EBASE has been loaded, unset BEV, set
* interrupt mask as it was but make sure that timer interrupts
* are enabled
*/
li k0, (ST0_EXL | KSU_USER | ST0_IE)
andi v0, v0, ST0_IM
or k0, k0, v0
mtc0 k0, CP0_STATUS
ehb
/* Set Guest EPC */
LONG_L t0, VCPU_PC(k1)
mtc0 t0, CP0_EPC
FEXPORT(__kvm_mips_load_asid)
/* Set the ASID for the Guest Kernel */
PTR_L t0, VCPU_COP0(k1)
LONG_L t0, COP0_STATUS(t0)
andi t0, KSU_USER | ST0_ERL | ST0_EXL
xori t0, KSU_USER
bnez t0, 1f /* If kernel */
INT_ADDIU t1, k1, VCPU_GUEST_KERNEL_ASID /* (BD) */
INT_ADDIU t1, k1, VCPU_GUEST_USER_ASID /* else user */
1:
/* t1: contains the base of the ASID array, need to get the cpu id */
LONG_L t2, TI_CPU($28) /* smp_processor_id */
INT_SLL t2, t2, 2 /* x4 */
REG_ADDU t3, t1, t2
LONG_L k0, (t3)
#ifdef CONFIG_MIPS_ASID_BITS_VARIABLE
li t3, CPUINFO_SIZE/4
mul t2, t2, t3 /* x sizeof(struct cpuinfo_mips)/4 */
LONG_L t2, (cpu_data + CPUINFO_ASID_MASK)(t2)
and k0, k0, t2
#else
andi k0, k0, MIPS_ENTRYHI_ASID
#endif
mtc0 k0, CP0_ENTRYHI
ehb
/* Disable RDHWR access */
mtc0 zero, CP0_HWRENA
.set noat
/* Now load up the Guest Context from VCPU */
LONG_L $1, VCPU_R1(k1)
LONG_L $2, VCPU_R2(k1)
LONG_L $3, VCPU_R3(k1)
LONG_L $4, VCPU_R4(k1)
LONG_L $5, VCPU_R5(k1)
LONG_L $6, VCPU_R6(k1)
LONG_L $7, VCPU_R7(k1)
LONG_L $8, VCPU_R8(k1)
LONG_L $9, VCPU_R9(k1)
LONG_L $10, VCPU_R10(k1)
LONG_L $11, VCPU_R11(k1)
LONG_L $12, VCPU_R12(k1)
LONG_L $13, VCPU_R13(k1)
LONG_L $14, VCPU_R14(k1)
LONG_L $15, VCPU_R15(k1)
LONG_L $16, VCPU_R16(k1)
LONG_L $17, VCPU_R17(k1)
LONG_L $18, VCPU_R18(k1)
LONG_L $19, VCPU_R19(k1)
LONG_L $20, VCPU_R20(k1)
LONG_L $21, VCPU_R21(k1)
LONG_L $22, VCPU_R22(k1)
LONG_L $23, VCPU_R23(k1)
LONG_L $24, VCPU_R24(k1)
LONG_L $25, VCPU_R25(k1)
/* k0/k1 loaded up later */
LONG_L $28, VCPU_R28(k1)
LONG_L $29, VCPU_R29(k1)
LONG_L $30, VCPU_R30(k1)
LONG_L $31, VCPU_R31(k1)
/* Restore hi/lo */
LONG_L k0, VCPU_LO(k1)
mtlo k0
LONG_L k0, VCPU_HI(k1)
mthi k0
FEXPORT(__kvm_mips_load_k0k1)
/* Restore the guest's k0/k1 registers */
LONG_L k0, VCPU_R26(k1)
LONG_L k1, VCPU_R27(k1)
/* Jump to guest */
eret
EXPORT(__kvm_mips_vcpu_run_end)
VECTOR(MIPSX(exception), unknown)
/* Find out what mode we came from and jump to the proper handler. */
mtc0 k0, CP0_ERROREPC #01: Save guest k0
ehb #02:
mfc0 k0, CP0_EBASE #02: Get EBASE
INT_SRL k0, k0, 10 #03: Get rid of CPUNum
INT_SLL k0, k0, 10 #04
LONG_S k1, 0x3000(k0) #05: Save k1 @ offset 0x3000
INT_ADDIU k0, k0, 0x2000 #06: Exception handler is
# installed @ offset 0x2000
j k0 #07: jump to the function
nop #08: branch delay slot
VECTOR_END(MIPSX(exceptionEnd))
.end MIPSX(exception)
/*
* Generic Guest exception handler. We end up here when the guest
* does something that causes a trap to kernel mode.
*/
NESTED (MIPSX(GuestException), CALLFRAME_SIZ, ra)
/* Get the VCPU pointer from DDTATA_LO */
mfc0 k1, CP0_DDATA_LO
INT_ADDIU k1, k1, VCPU_HOST_ARCH
/* Start saving Guest context to VCPU */
LONG_S $0, VCPU_R0(k1)
LONG_S $1, VCPU_R1(k1)
LONG_S $2, VCPU_R2(k1)
LONG_S $3, VCPU_R3(k1)
LONG_S $4, VCPU_R4(k1)
LONG_S $5, VCPU_R5(k1)
LONG_S $6, VCPU_R6(k1)
LONG_S $7, VCPU_R7(k1)
LONG_S $8, VCPU_R8(k1)
LONG_S $9, VCPU_R9(k1)
LONG_S $10, VCPU_R10(k1)
LONG_S $11, VCPU_R11(k1)
LONG_S $12, VCPU_R12(k1)
LONG_S $13, VCPU_R13(k1)
LONG_S $14, VCPU_R14(k1)
LONG_S $15, VCPU_R15(k1)
LONG_S $16, VCPU_R16(k1)
LONG_S $17, VCPU_R17(k1)
LONG_S $18, VCPU_R18(k1)
LONG_S $19, VCPU_R19(k1)
LONG_S $20, VCPU_R20(k1)
LONG_S $21, VCPU_R21(k1)
LONG_S $22, VCPU_R22(k1)
LONG_S $23, VCPU_R23(k1)
LONG_S $24, VCPU_R24(k1)
LONG_S $25, VCPU_R25(k1)
/* Guest k0/k1 saved later */
LONG_S $28, VCPU_R28(k1)
LONG_S $29, VCPU_R29(k1)
LONG_S $30, VCPU_R30(k1)
LONG_S $31, VCPU_R31(k1)
.set at
/* We need to save hi/lo and restore them on the way out */
mfhi t0
LONG_S t0, VCPU_HI(k1)
mflo t0
LONG_S t0, VCPU_LO(k1)
/* Finally save guest k0/k1 to VCPU */
mfc0 t0, CP0_ERROREPC
LONG_S t0, VCPU_R26(k1)
/* Get GUEST k1 and save it in VCPU */
PTR_LI t1, ~0x2ff
mfc0 t0, CP0_EBASE
and t0, t0, t1
LONG_L t0, 0x3000(t0)
LONG_S t0, VCPU_R27(k1)
/* Now that context has been saved, we can use other registers */
/* Restore vcpu */
mfc0 a1, CP0_DDATA_LO
move s1, a1
/* Restore run (vcpu->run) */
LONG_L a0, VCPU_RUN(a1)
/* Save pointer to run in s0, will be saved by the compiler */
move s0, a0
/*
* Save Host level EPC, BadVaddr and Cause to VCPU, useful to
* process the exception
*/
mfc0 k0,CP0_EPC
LONG_S k0, VCPU_PC(k1)
mfc0 k0, CP0_BADVADDR
LONG_S k0, VCPU_HOST_CP0_BADVADDR(k1)
mfc0 k0, CP0_CAUSE
sw k0, VCPU_HOST_CP0_CAUSE(k1)
/* Now restore the host state just enough to run the handlers */
/* Switch EBASE to the one used by Linux */
/* load up the host EBASE */
mfc0 v0, CP0_STATUS
or k0, v0, ST0_BEV
mtc0 k0, CP0_STATUS
ehb
LONG_L k0, ebase
mtc0 k0,CP0_EBASE
/*
* If FPU is enabled, save FCR31 and clear it so that later ctc1's don't
* trigger FPE for pending exceptions.
*/
and v1, v0, ST0_CU1
beqz v1, 1f
nop
.set push
SET_HARDFLOAT
cfc1 t0, fcr31
sw t0, VCPU_FCR31(k1)
ctc1 zero,fcr31
.set pop
1:
#ifdef CONFIG_CPU_HAS_MSA
/*
* If MSA is enabled, save MSACSR and clear it so that later
* instructions don't trigger MSAFPE for pending exceptions.
*/
mfc0 t0, CP0_CONFIG3
ext t0, t0, 28, 1 /* MIPS_CONF3_MSAP */
beqz t0, 1f
nop
mfc0 t0, CP0_CONFIG5
ext t0, t0, 27, 1 /* MIPS_CONF5_MSAEN */
beqz t0, 1f
nop
_cfcmsa t0, MSA_CSR
sw t0, VCPU_MSA_CSR(k1)
_ctcmsa MSA_CSR, zero
1:
#endif
/* Now that the new EBASE has been loaded, unset BEV and KSU_USER */
and v0, v0, ~(ST0_EXL | KSU_USER | ST0_IE)
or v0, v0, ST0_CU0
mtc0 v0, CP0_STATUS
ehb
/* Load up host GP */
LONG_L gp, VCPU_HOST_GP(k1)
/* Need a stack before we can jump to "C" */
LONG_L sp, VCPU_HOST_STACK(k1)
/* Saved host state */
INT_ADDIU sp, sp, -PT_SIZE
/*
* XXXKYMA do we need to load the host ASID, maybe not because the
* kernel entries are marked GLOBAL, need to verify
*/
/* Restore host DDATA_LO */
LONG_L k0, PT_HOST_USERLOCAL(sp)
mtc0 k0, CP0_DDATA_LO
/* Restore RDHWR access */
INT_L k0, hwrena
mtc0 k0, CP0_HWRENA
/* Jump to handler */
FEXPORT(__kvm_mips_jump_to_handler)
/*
* XXXKYMA: not sure if this is safe, how large is the stack??
* Now jump to the kvm_mips_handle_exit() to see if we can deal
* with this in the kernel
*/
PTR_LA t9, kvm_mips_handle_exit
jalr.hb t9
INT_ADDIU sp, sp, -CALLFRAME_SIZ /* BD Slot */
/* Return from handler Make sure interrupts are disabled */
di
ehb
/*
* XXXKYMA: k0/k1 could have been blown away if we processed
* an exception while we were handling the exception from the
* guest, reload k1
*/
move k1, s1
INT_ADDIU k1, k1, VCPU_HOST_ARCH
/*
* Check return value, should tell us if we are returning to the
* host (handle I/O etc)or resuming the guest
*/
andi t0, v0, RESUME_HOST
bnez t0, __kvm_mips_return_to_host
nop
__kvm_mips_return_to_guest:
/* Put the saved pointer to vcpu (s1) back into the DDATA_LO Register */
mtc0 s1, CP0_DDATA_LO
/* Load up the Guest EBASE to minimize the window where BEV is set */
LONG_L t0, VCPU_GUEST_EBASE(k1)
/* Switch EBASE back to the one used by KVM */
mfc0 v1, CP0_STATUS
or k0, v1, ST0_BEV
mtc0 k0, CP0_STATUS
ehb
mtc0 t0, CP0_EBASE
/* Setup status register for running guest in UM */
or v1, v1, (ST0_EXL | KSU_USER | ST0_IE)
and v1, v1, ~(ST0_CU0 | ST0_MX)
mtc0 v1, CP0_STATUS
ehb
/* Set Guest EPC */
LONG_L t0, VCPU_PC(k1)
mtc0 t0, CP0_EPC
/* Set the ASID for the Guest Kernel */
PTR_L t0, VCPU_COP0(k1)
LONG_L t0, COP0_STATUS(t0)
andi t0, KSU_USER | ST0_ERL | ST0_EXL
xori t0, KSU_USER
bnez t0, 1f /* If kernel */
INT_ADDIU t1, k1, VCPU_GUEST_KERNEL_ASID /* (BD) */
INT_ADDIU t1, k1, VCPU_GUEST_USER_ASID /* else user */
1:
/* t1: contains the base of the ASID array, need to get the cpu id */
LONG_L t2, TI_CPU($28) /* smp_processor_id */
INT_SLL t2, t2, 2 /* x4 */
REG_ADDU t3, t1, t2
LONG_L k0, (t3)
#ifdef CONFIG_MIPS_ASID_BITS_VARIABLE
li t3, CPUINFO_SIZE/4
mul t2, t2, t3 /* x sizeof(struct cpuinfo_mips)/4 */
LONG_L t2, (cpu_data + CPUINFO_ASID_MASK)(t2)
and k0, k0, t2
#else
andi k0, k0, MIPS_ENTRYHI_ASID
#endif
mtc0 k0, CP0_ENTRYHI
ehb
/* Disable RDHWR access */
mtc0 zero, CP0_HWRENA
.set noat
/* load the guest context from VCPU and return */
LONG_L $0, VCPU_R0(k1)
LONG_L $1, VCPU_R1(k1)
LONG_L $2, VCPU_R2(k1)
LONG_L $3, VCPU_R3(k1)
LONG_L $4, VCPU_R4(k1)
LONG_L $5, VCPU_R5(k1)
LONG_L $6, VCPU_R6(k1)
LONG_L $7, VCPU_R7(k1)
LONG_L $8, VCPU_R8(k1)
LONG_L $9, VCPU_R9(k1)
LONG_L $10, VCPU_R10(k1)
LONG_L $11, VCPU_R11(k1)
LONG_L $12, VCPU_R12(k1)
LONG_L $13, VCPU_R13(k1)
LONG_L $14, VCPU_R14(k1)
LONG_L $15, VCPU_R15(k1)
LONG_L $16, VCPU_R16(k1)
LONG_L $17, VCPU_R17(k1)
LONG_L $18, VCPU_R18(k1)
LONG_L $19, VCPU_R19(k1)
LONG_L $20, VCPU_R20(k1)
LONG_L $21, VCPU_R21(k1)
LONG_L $22, VCPU_R22(k1)
LONG_L $23, VCPU_R23(k1)
LONG_L $24, VCPU_R24(k1)
LONG_L $25, VCPU_R25(k1)
/* $/k1 loaded later */
LONG_L $28, VCPU_R28(k1)
LONG_L $29, VCPU_R29(k1)
LONG_L $30, VCPU_R30(k1)
LONG_L $31, VCPU_R31(k1)
FEXPORT(__kvm_mips_skip_guest_restore)
LONG_L k0, VCPU_HI(k1)
mthi k0
LONG_L k0, VCPU_LO(k1)
mtlo k0
LONG_L k0, VCPU_R26(k1)
LONG_L k1, VCPU_R27(k1)
eret
.set at
__kvm_mips_return_to_host:
/* EBASE is already pointing to Linux */
LONG_L k1, VCPU_HOST_STACK(k1)
INT_ADDIU k1,k1, -PT_SIZE
/* Restore host DDATA_LO */
LONG_L k0, PT_HOST_USERLOCAL(k1)
mtc0 k0, CP0_DDATA_LO
/*
* r2/v0 is the return code, shift it down by 2 (arithmetic)
* to recover the err code
*/
INT_SRA k0, v0, 2
move $2, k0
/* Load context saved on the host stack */
LONG_L $16, PT_R16(k1)
LONG_L $17, PT_R17(k1)
LONG_L $18, PT_R18(k1)
LONG_L $19, PT_R19(k1)
LONG_L $20, PT_R20(k1)
LONG_L $21, PT_R21(k1)
LONG_L $22, PT_R22(k1)
LONG_L $23, PT_R23(k1)
LONG_L $28, PT_R28(k1)
LONG_L $29, PT_R29(k1)
LONG_L $30, PT_R30(k1)
LONG_L k0, PT_HI(k1)
mthi k0
LONG_L k0, PT_LO(k1)
mtlo k0
/* Restore RDHWR access */
INT_L k0, hwrena
mtc0 k0, CP0_HWRENA
/* Restore RA, which is the address we will return to */
LONG_L ra, PT_R31(k1)
j ra
nop
VECTOR_END(MIPSX(GuestExceptionEnd))
.end MIPSX(GuestException)
MIPSX(exceptions):
####
##### The exception handlers.
#####
.word _C_LABEL(MIPSX(GuestException)) # 0
.word _C_LABEL(MIPSX(GuestException)) # 1
.word _C_LABEL(MIPSX(GuestException)) # 2
.word _C_LABEL(MIPSX(GuestException)) # 3
.word _C_LABEL(MIPSX(GuestException)) # 4
.word _C_LABEL(MIPSX(GuestException)) # 5
.word _C_LABEL(MIPSX(GuestException)) # 6
.word _C_LABEL(MIPSX(GuestException)) # 7
.word _C_LABEL(MIPSX(GuestException)) # 8
.word _C_LABEL(MIPSX(GuestException)) # 9
.word _C_LABEL(MIPSX(GuestException)) # 10
.word _C_LABEL(MIPSX(GuestException)) # 11
.word _C_LABEL(MIPSX(GuestException)) # 12
.word _C_LABEL(MIPSX(GuestException)) # 13
.word _C_LABEL(MIPSX(GuestException)) # 14
.word _C_LABEL(MIPSX(GuestException)) # 15
.word _C_LABEL(MIPSX(GuestException)) # 16
.word _C_LABEL(MIPSX(GuestException)) # 17
.word _C_LABEL(MIPSX(GuestException)) # 18
.word _C_LABEL(MIPSX(GuestException)) # 19
.word _C_LABEL(MIPSX(GuestException)) # 20
.word _C_LABEL(MIPSX(GuestException)) # 21
.word _C_LABEL(MIPSX(GuestException)) # 22
.word _C_LABEL(MIPSX(GuestException)) # 23
.word _C_LABEL(MIPSX(GuestException)) # 24
.word _C_LABEL(MIPSX(GuestException)) # 25
.word _C_LABEL(MIPSX(GuestException)) # 26
.word _C_LABEL(MIPSX(GuestException)) # 27
.word _C_LABEL(MIPSX(GuestException)) # 28
.word _C_LABEL(MIPSX(GuestException)) # 29
.word _C_LABEL(MIPSX(GuestException)) # 30
.word _C_LABEL(MIPSX(GuestException)) # 31
Reference in a new issue View git blame Copy permalink