mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 10:49:33 +00:00
![Daniel Axtens](/assets/img/avatar_default.png)
The SCC PATA interface is only used by celleb. celleb has been dropped [1], so drop the drivers. [1] http://patchwork.ozlabs.org/patch/451730/ CC: "David S. Miller" <davem@davemloft.net> CC: linux-ide@vger.kernel.org CC: Valentin Rothberg <valentinrothberg@gmail.com> CC: mpe@ellerman.id.au CC: linuxppc-dev@lists.ozlab.org Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Tejun Heo <tj@kernel.org>
871 lines
28 KiB
Text
871 lines
28 KiB
Text
#
|
|
# IDE ATA ATAPI Block device driver configuration
|
|
#
|
|
|
|
# Select HAVE_IDE if IDE is supported
|
|
config HAVE_IDE
|
|
bool
|
|
|
|
menuconfig IDE
|
|
tristate "ATA/ATAPI/MFM/RLL support (DEPRECATED)"
|
|
depends on HAVE_IDE
|
|
depends on BLOCK
|
|
---help---
|
|
If you say Y here, your kernel will be able to manage ATA/(E)IDE and
|
|
ATAPI units. The most common cases are IDE hard drives and ATAPI
|
|
CD-ROM drives.
|
|
|
|
This subsystem is currently in maintenance mode with only bug fix
|
|
changes applied. Users of ATA hardware are encouraged to migrate to
|
|
the newer ATA subsystem ("Serial ATA (prod) and Parallel ATA
|
|
(experimental) drivers") which is more actively maintained.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ide-core.
|
|
|
|
For further information, please read <file:Documentation/ide/ide.txt>.
|
|
|
|
If unsure, say N.
|
|
|
|
if IDE
|
|
|
|
comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
|
|
|
|
config IDE_XFER_MODE
|
|
bool
|
|
|
|
config IDE_TIMINGS
|
|
bool
|
|
select IDE_XFER_MODE
|
|
|
|
config IDE_ATAPI
|
|
bool
|
|
|
|
config IDE_LEGACY
|
|
bool
|
|
|
|
config BLK_DEV_IDE_SATA
|
|
bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
|
|
default n
|
|
---help---
|
|
There are two drivers for Serial ATA controllers.
|
|
|
|
The main driver, "libata", uses the SCSI subsystem
|
|
and supports most modern SATA controllers. In order to use it
|
|
you may take a look at "Serial ATA (prod) and Parallel ATA
|
|
(experimental) drivers".
|
|
|
|
The IDE driver (which you are currently configuring) supports
|
|
a few first-generation SATA controllers.
|
|
|
|
In order to eliminate conflicts between the two subsystems,
|
|
this config option enables the IDE driver's SATA support.
|
|
Normally this is disabled, as it is preferred that libata
|
|
supports SATA controllers, and this (IDE) driver supports
|
|
PATA controllers.
|
|
|
|
If unsure, say N.
|
|
|
|
config IDE_GD
|
|
tristate "generic ATA/ATAPI disk support"
|
|
default y
|
|
help
|
|
Support for ATA/ATAPI disks (including ATAPI floppy drives).
|
|
|
|
To compile this driver as a module, choose M here.
|
|
The module will be called ide-gd_mod.
|
|
|
|
If unsure, say Y.
|
|
|
|
config IDE_GD_ATA
|
|
bool "ATA disk support"
|
|
depends on IDE_GD
|
|
default y
|
|
help
|
|
This will include support for ATA hard disks.
|
|
|
|
If unsure, say Y.
|
|
|
|
config IDE_GD_ATAPI
|
|
bool "ATAPI floppy support"
|
|
depends on IDE_GD
|
|
select IDE_ATAPI
|
|
help
|
|
This will include support for ATAPI floppy drives
|
|
(i.e. Iomega ZIP or MKE LS-120).
|
|
|
|
For information about jumper settings and the question
|
|
of when a ZIP drive uses a partition table, see
|
|
<http://www.win.tue.nl/~aeb/linux/zip/zip-1.html>.
|
|
|
|
If unsure, say N.
|
|
|
|
config BLK_DEV_IDECS
|
|
tristate "PCMCIA IDE support"
|
|
depends on PCMCIA
|
|
help
|
|
Support for Compact Flash cards, outboard IDE disks, tape drives,
|
|
and CD-ROM drives connected through a PCMCIA card.
|
|
|
|
config BLK_DEV_DELKIN
|
|
tristate "Cardbus IDE support (Delkin/ASKA/Workbit)"
|
|
depends on CARDBUS && PCI
|
|
help
|
|
Support for Delkin, ASKA, and Workbit Cardbus CompactFlash
|
|
Adapters. This may also work for similar SD and XD adapters.
|
|
|
|
config BLK_DEV_IDECD
|
|
tristate "Include IDE/ATAPI CDROM support"
|
|
select IDE_ATAPI
|
|
---help---
|
|
If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is
|
|
a newer protocol used by IDE CD-ROM and TAPE drives, similar to the
|
|
SCSI protocol. Most new CD-ROM drives use ATAPI, including the
|
|
NEC-260, Mitsumi FX400, Sony 55E, and just about all non-SCSI
|
|
double(2X) or better speed drives.
|
|
|
|
If you say Y here, the CD-ROM drive will be identified at boot time
|
|
along with other IDE devices, as "hdb" or "hdc", or something
|
|
similar (check the boot messages with dmesg). If this is your only
|
|
CD-ROM drive, you can say N to all other CD-ROM options, but be sure
|
|
to say Y or M to "ISO 9660 CD-ROM file system support".
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ide-cd.
|
|
|
|
config BLK_DEV_IDECD_VERBOSE_ERRORS
|
|
bool "Verbose error logging for IDE/ATAPI CDROM driver" if EXPERT
|
|
depends on BLK_DEV_IDECD
|
|
default y
|
|
help
|
|
Turn this on to have the driver print out the meanings of the
|
|
ATAPI error codes. This will use up additional 8kB of kernel-space
|
|
memory, though.
|
|
|
|
config BLK_DEV_IDETAPE
|
|
tristate "Include IDE/ATAPI TAPE support"
|
|
select IDE_ATAPI
|
|
help
|
|
If you have an IDE tape drive using the ATAPI protocol, say Y.
|
|
ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
|
|
similar to the SCSI protocol. If you have an SCSI tape drive
|
|
however, you can say N here.
|
|
|
|
You should also say Y if you have an OnStream DI-30 tape drive; this
|
|
will not work with the SCSI protocol, until there is support for the
|
|
SC-30 and SC-50 versions.
|
|
|
|
If you say Y here, the tape drive will be identified at boot time
|
|
along with other IDE devices, as "hdb" or "hdc", or something
|
|
similar, and will be mapped to a character device such as "ht0"
|
|
(check the boot messages with dmesg). Be sure to consult the
|
|
<file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.txt>
|
|
files for usage information.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ide-tape.
|
|
|
|
config BLK_DEV_IDEACPI
|
|
bool "IDE ACPI support"
|
|
depends on ACPI
|
|
---help---
|
|
Implement ACPI support for generic IDE devices. On modern
|
|
machines ACPI support is required to properly handle ACPI S3 states.
|
|
|
|
config IDE_TASK_IOCTL
|
|
bool "IDE Taskfile Access"
|
|
help
|
|
This is a direct raw access to the media. It is a complex but
|
|
elegant solution to test and validate the domain of the hardware and
|
|
perform below the driver data recovery if needed. This is the most
|
|
basic form of media-forensics.
|
|
|
|
If you are unsure, say N here.
|
|
|
|
config IDE_PROC_FS
|
|
bool "legacy /proc/ide/ support"
|
|
depends on IDE && PROC_FS
|
|
default y
|
|
help
|
|
This option enables support for the various files in
|
|
/proc/ide. In Linux 2.6 this has been superseded by
|
|
files in sysfs but many legacy applications rely on this.
|
|
|
|
If unsure say Y.
|
|
|
|
comment "IDE chipset support/bugfixes"
|
|
|
|
config IDE_GENERIC
|
|
tristate "generic/default IDE chipset support"
|
|
depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC
|
|
default ARM && ARCH_RPC
|
|
help
|
|
This is the generic IDE driver. This driver attaches to the
|
|
fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and
|
|
so on). Please note that if this driver is built into the
|
|
kernel or loaded before other ATA (IDE or libata) drivers
|
|
and the controller is located at legacy ports, this driver
|
|
may grab those ports and thus can prevent the controller
|
|
specific driver from attaching.
|
|
|
|
Also, currently, IDE generic doesn't allow IRQ sharing
|
|
meaning that the IRQs it grabs won't be available to other
|
|
controllers sharing those IRQs which usually makes drivers
|
|
for those controllers fail. Generally, it's not a good idea
|
|
to load IDE generic driver on modern systems.
|
|
|
|
If unsure, say N.
|
|
|
|
config BLK_DEV_PLATFORM
|
|
tristate "Platform driver for IDE interfaces"
|
|
help
|
|
This is the platform IDE driver, used mostly for Memory Mapped
|
|
IDE devices, like Compact Flashes running in True IDE mode.
|
|
|
|
If unsure, say N.
|
|
|
|
config BLK_DEV_CMD640
|
|
tristate "CMD640 chipset bugfix/support"
|
|
depends on X86
|
|
select IDE_TIMINGS
|
|
---help---
|
|
The CMD-Technologies CMD640 IDE chip is used on many common 486 and
|
|
Pentium motherboards, usually in combination with a "Neptune" or
|
|
"SiS" chipset. Unfortunately, it has a number of rather nasty
|
|
design flaws that can cause severe data corruption under many common
|
|
conditions. Say Y here to include code which tries to automatically
|
|
detect and correct the problems under Linux. This option also
|
|
enables access to the secondary IDE ports in some CMD640 based
|
|
systems.
|
|
|
|
This driver will work automatically in PCI based systems (most new
|
|
systems have PCI slots). But if your system uses VESA local bus
|
|
(VLB) instead of PCI, you must also supply a kernel boot parameter
|
|
to enable the CMD640 bugfix/support: "cmd640.probe_vlb". (Try "man
|
|
bootparam" or see the documentation of your boot loader about how to
|
|
pass options to the kernel.)
|
|
|
|
The CMD640 chip is also used on add-in cards by Acculogic, and on
|
|
the "CSA-6400E PCI to IDE controller" that some people have. For
|
|
details, read <file:Documentation/ide/ide.txt>.
|
|
|
|
config BLK_DEV_CMD640_ENHANCED
|
|
bool "CMD640 enhanced support"
|
|
depends on BLK_DEV_CMD640
|
|
help
|
|
This option includes support for setting/autotuning PIO modes and
|
|
prefetch on CMD640 IDE interfaces. For details, read
|
|
<file:Documentation/ide/ide.txt>. If you have a CMD640 IDE interface
|
|
and your BIOS does not already do this for you, then say Y here.
|
|
Otherwise say N.
|
|
|
|
config BLK_DEV_IDEPNP
|
|
tristate "PNP EIDE support"
|
|
depends on PNP
|
|
help
|
|
If you have a PnP (Plug and Play) compatible EIDE card and
|
|
would like the kernel to automatically detect and activate
|
|
it, say Y here.
|
|
|
|
config BLK_DEV_IDEDMA_SFF
|
|
bool
|
|
|
|
if PCI
|
|
|
|
comment "PCI IDE chipsets support"
|
|
|
|
config BLK_DEV_IDEPCI
|
|
bool
|
|
|
|
config IDEPCI_PCIBUS_ORDER
|
|
bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)"
|
|
depends on IDE=y && BLK_DEV_IDEPCI
|
|
default y
|
|
help
|
|
Probe IDE PCI devices in the order in which they appear on the
|
|
PCI bus (i.e. 00:1f.1 PCI device before 02:01.0 PCI device)
|
|
instead of the order in which IDE PCI host drivers are loaded.
|
|
|
|
Please note that this method of assuring stable naming of
|
|
IDE devices is unreliable and use other means for achieving
|
|
it (i.e. udev).
|
|
|
|
If in doubt, say N.
|
|
|
|
# TODO: split it on per host driver config options (or module parameters)
|
|
config BLK_DEV_OFFBOARD
|
|
bool "Boot off-board chipsets first support (DEPRECATED)"
|
|
depends on BLK_DEV_IDEPCI && (BLK_DEV_AEC62XX || BLK_DEV_GENERIC || BLK_DEV_HPT366 || BLK_DEV_PDC202XX_NEW || BLK_DEV_PDC202XX_OLD || BLK_DEV_TC86C001)
|
|
help
|
|
Normally, IDE controllers built into the motherboard (on-board
|
|
controllers) are assigned to ide0 and ide1 while those on add-in PCI
|
|
cards (off-board controllers) are relegated to ide2 and ide3.
|
|
Answering Y here will allow you to reverse the situation, with
|
|
off-board controllers on ide0/1 and on-board controllers on ide2/3.
|
|
This can improve the usability of some boot managers such as lilo
|
|
when booting from a drive on an off-board controller.
|
|
|
|
Note that, if you do this, the order of the hd* devices will be
|
|
rearranged which may require modification of fstab and other files.
|
|
|
|
Please also note that this method of assuring stable naming of
|
|
IDE devices is unreliable and use other means for achieving it
|
|
(i.e. udev).
|
|
|
|
If in doubt, say N.
|
|
|
|
config BLK_DEV_GENERIC
|
|
tristate "Generic PCI IDE Chipset Support"
|
|
select BLK_DEV_IDEPCI
|
|
help
|
|
This option provides generic support for various PCI IDE Chipsets
|
|
which otherwise might not be supported.
|
|
|
|
config BLK_DEV_OPTI621
|
|
tristate "OPTi 82C621 chipset enhanced support"
|
|
select BLK_DEV_IDEPCI
|
|
help
|
|
This is a driver for the OPTi 82C621 EIDE controller.
|
|
Please read the comments at the top of <file:drivers/ide/opti621.c>.
|
|
|
|
config BLK_DEV_RZ1000
|
|
tristate "RZ1000 chipset bugfix/support"
|
|
depends on X86
|
|
select BLK_DEV_IDEPCI
|
|
help
|
|
The PC-Technologies RZ1000 IDE chip is used on many common 486 and
|
|
Pentium motherboards, usually along with the "Neptune" chipset.
|
|
Unfortunately, it has a rather nasty design flaw that can cause
|
|
severe data corruption under many conditions. Say Y here to include
|
|
code which automatically detects and corrects the problem under
|
|
Linux. This may slow disk throughput by a few percent, but at least
|
|
things will operate 100% reliably.
|
|
|
|
config BLK_DEV_IDEDMA_PCI
|
|
bool
|
|
select BLK_DEV_IDEPCI
|
|
select BLK_DEV_IDEDMA_SFF
|
|
|
|
config BLK_DEV_AEC62XX
|
|
tristate "AEC62XX chipset support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds explicit support for Acard AEC62xx (Artop ATP8xx)
|
|
IDE controllers. This allows the kernel to change PIO, DMA and UDMA
|
|
speeds and to configure the chip to optimum performance.
|
|
|
|
config BLK_DEV_ALI15X3
|
|
tristate "ALI M15x3 chipset support"
|
|
select IDE_TIMINGS
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver ensures (U)DMA support for ALI 1533, 1543 and 1543C
|
|
onboard chipsets. It also tests for Simplex mode and enables
|
|
normal dual channel support.
|
|
|
|
Please read the comments at the top of
|
|
<file:drivers/ide/alim15x3.c>.
|
|
|
|
If unsure, say N.
|
|
|
|
config BLK_DEV_AMD74XX
|
|
tristate "AMD and nVidia IDE support"
|
|
depends on !ARM
|
|
select IDE_TIMINGS
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds explicit support for AMD-7xx and AMD-8111 chips
|
|
and also for the nVidia nForce chip. This allows the kernel to
|
|
change PIO, DMA and UDMA speeds and to configure the chip to
|
|
optimum performance.
|
|
|
|
config BLK_DEV_ATIIXP
|
|
tristate "ATI IXP chipset IDE support"
|
|
depends on X86
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds explicit support for ATI IXP chipset.
|
|
This allows the kernel to change PIO, DMA and UDMA speeds
|
|
and to configure the chip to optimum performance.
|
|
|
|
Say Y here if you have an ATI IXP chipset IDE controller.
|
|
|
|
config BLK_DEV_CMD64X
|
|
tristate "CMD64{3|6|8|9} chipset support"
|
|
select IDE_TIMINGS
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
Say Y here if you have an IDE controller which uses any of these
|
|
chipsets: CMD643, CMD646, or CMD648.
|
|
|
|
config BLK_DEV_TRIFLEX
|
|
tristate "Compaq Triflex IDE support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
Say Y here if you have a Compaq Triflex IDE controller, such
|
|
as those commonly found on Compaq Pentium-Pro systems
|
|
|
|
config BLK_DEV_CY82C693
|
|
tristate "CY82C693 chipset support"
|
|
depends on ALPHA
|
|
select IDE_TIMINGS
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds detection and support for the CY82C693 chipset
|
|
used on Digital's PC-Alpha 164SX boards.
|
|
|
|
config BLK_DEV_CS5520
|
|
tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"
|
|
depends on X86_32 || COMPILE_TEST
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
Include support for PIO tuning and virtual DMA on the Cyrix MediaGX
|
|
5510/5520 chipset. This will automatically be detected and
|
|
configured if found.
|
|
|
|
It is safe to say Y to this question.
|
|
|
|
config BLK_DEV_CS5530
|
|
tristate "Cyrix/National Semiconductor CS5530 MediaGX chipset support"
|
|
depends on X86_32 || COMPILE_TEST
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
Include support for UDMA on the Cyrix MediaGX 5530 chipset. This
|
|
will automatically be detected and configured if found.
|
|
|
|
It is safe to say Y to this question.
|
|
|
|
config BLK_DEV_CS5535
|
|
tristate "AMD CS5535 chipset support"
|
|
depends on X86_32
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
Include support for UDMA on the NSC/AMD CS5535 companion chipset.
|
|
This will automatically be detected and configured if found.
|
|
|
|
It is safe to say Y to this question.
|
|
|
|
config BLK_DEV_CS5536
|
|
tristate "CS5536 chipset support"
|
|
depends on X86_32
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This option enables support for the AMD CS5536
|
|
companion chip used with the Geode LX processor family.
|
|
|
|
If unsure, say N.
|
|
|
|
config BLK_DEV_HPT366
|
|
tristate "HPT36X/37X chipset support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
HPT366 is an Ultra DMA chipset for ATA-66.
|
|
HPT368 is an Ultra DMA chipset for ATA-66 RAID Based.
|
|
HPT370 is an Ultra DMA chipset for ATA-100.
|
|
HPT372 is an Ultra DMA chipset for ATA-100.
|
|
HPT374 is an Ultra DMA chipset for ATA-100.
|
|
|
|
This driver adds up to 4 more EIDE devices sharing a single
|
|
interrupt.
|
|
|
|
The HPT366 chipset in its current form is bootable. One solution
|
|
for this problem are special LILO commands for redirecting the
|
|
reference to device 0x80. The other solution is to say Y to "Boot
|
|
off-board chipsets first support" (CONFIG_BLK_DEV_OFFBOARD) unless
|
|
your mother board has the chipset natively mounted. Regardless one
|
|
should use the fore mentioned option and call at LILO.
|
|
|
|
This driver requires dynamic tuning of the chipset during the
|
|
ide-probe at boot. It is reported to support DVD II drives, by the
|
|
manufacturer.
|
|
|
|
config BLK_DEV_JMICRON
|
|
tristate "JMicron JMB36x support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
Basic support for the JMicron ATA controllers. For full support
|
|
use the libata drivers.
|
|
|
|
config BLK_DEV_SC1200
|
|
tristate "National SCx200 chipset support"
|
|
depends on X86_32 || COMPILE_TEST
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds support for the on-board IDE controller on the
|
|
National SCx200 series of embedded x86 "Geode" systems.
|
|
|
|
config BLK_DEV_PIIX
|
|
tristate "Intel PIIX/ICH chipsets support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds explicit support for Intel PIIX and ICH chips.
|
|
This allows the kernel to change PIO, DMA and UDMA speeds and to
|
|
configure the chip to optimum performance.
|
|
|
|
config BLK_DEV_IT8172
|
|
tristate "IT8172 IDE support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds support for the IDE controller on the
|
|
IT8172 System Controller.
|
|
|
|
config BLK_DEV_IT8213
|
|
tristate "IT8213 IDE support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds support for the ITE 8213 IDE controller.
|
|
|
|
config BLK_DEV_IT821X
|
|
tristate "IT821X IDE support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds support for the ITE 8211 IDE controller and the
|
|
IT 8212 IDE RAID controller in both RAID and pass-through mode.
|
|
|
|
config BLK_DEV_NS87415
|
|
tristate "NS87415 chipset support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds detection and support for the NS87415 chip
|
|
(used mainly on SPARC64 and PA-RISC machines).
|
|
|
|
Please read the comments at the top of <file:drivers/ide/ns87415.c>.
|
|
|
|
config BLK_DEV_PDC202XX_OLD
|
|
tristate "PROMISE PDC202{46|62|65|67} support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
Promise Ultra33 or PDC20246
|
|
Promise Ultra66 or PDC20262
|
|
Promise Ultra100 or PDC20265/PDC20267/PDC20268
|
|
|
|
This driver adds up to 4 more EIDE devices sharing a single
|
|
interrupt. This add-on card is a bootable PCI UDMA controller. Since
|
|
multiple cards can be installed and there are BIOS ROM problems that
|
|
happen if the BIOS revisions of all installed cards (three-max) do
|
|
not match, the driver attempts to do dynamic tuning of the chipset
|
|
at boot-time for max-speed. Ultra33 BIOS 1.25 or newer is required
|
|
for more than one card.
|
|
|
|
Please read the comments at the top of
|
|
<file:drivers/ide/pdc202xx_old.c>.
|
|
|
|
If unsure, say N.
|
|
|
|
config BLK_DEV_PDC202XX_NEW
|
|
tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
|
|
config BLK_DEV_SVWKS
|
|
tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds PIO/(U)DMA support for the ServerWorks OSB4/CSB5
|
|
chipsets.
|
|
|
|
config BLK_DEV_SGIIOC4
|
|
tristate "Silicon Graphics IOC4 chipset ATA/ATAPI support"
|
|
depends on (IA64_SGI_SN2 || IA64_GENERIC) && SGI_IOC4
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds PIO & MultiMode DMA-2 support for the SGI IOC4
|
|
chipset, which has one channel and can support two devices.
|
|
Please say Y here if you have an Altix System from SGI.
|
|
|
|
config BLK_DEV_SIIMAGE
|
|
tristate "Silicon Image chipset support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds PIO/(U)DMA support for the SI CMD680 and SII
|
|
3112 (Serial ATA) chips.
|
|
|
|
config BLK_DEV_SIS5513
|
|
tristate "SiS5513 chipset support"
|
|
depends on X86
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver ensures (U)DMA support for SIS5513 chipset family based
|
|
mainboards.
|
|
|
|
The following chipsets are supported:
|
|
ATA16: SiS5511, SiS5513
|
|
ATA33: SiS5591, SiS5597, SiS5598, SiS5600
|
|
ATA66: SiS530, SiS540, SiS620, SiS630, SiS640
|
|
ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740,
|
|
SiS745, SiS750
|
|
|
|
Please read the comments at the top of <file:drivers/ide/sis5513.c>.
|
|
|
|
config BLK_DEV_SL82C105
|
|
tristate "Winbond SL82c105 support"
|
|
depends on (PPC || ARM)
|
|
select IDE_TIMINGS
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
If you have a Winbond SL82c105 IDE controller, say Y here to enable
|
|
special configuration for this chip. This is common on various CHRP
|
|
motherboards, but could be used elsewhere. If in doubt, say Y.
|
|
|
|
config BLK_DEV_SLC90E66
|
|
tristate "SLC90E66 chipset support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver ensures (U)DMA support for Victory66 SouthBridges for
|
|
SMsC with Intel NorthBridges. This is an Ultra66 based chipset.
|
|
The nice thing about it is that you can mix Ultra/DMA/PIO devices
|
|
and it will handle timing cycles. Since this is an improved
|
|
look-a-like to the PIIX4 it should be a nice addition.
|
|
|
|
Please read the comments at the top of
|
|
<file:drivers/ide/slc90e66.c>.
|
|
|
|
config BLK_DEV_TRM290
|
|
tristate "Tekram TRM290 chipset support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds support for bus master DMA transfers
|
|
using the Tekram TRM290 PCI IDE chip. Volunteers are
|
|
needed for further tweaking and development.
|
|
Please read the comments at the top of <file:drivers/ide/trm290.c>.
|
|
|
|
config BLK_DEV_VIA82CXXX
|
|
tristate "VIA82CXXX chipset support"
|
|
select IDE_TIMINGS
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds explicit support for VIA BusMastering IDE chips.
|
|
This allows the kernel to change PIO, DMA and UDMA speeds and to
|
|
configure the chip to optimum performance.
|
|
|
|
config BLK_DEV_TC86C001
|
|
tristate "Toshiba TC86C001 support"
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver adds support for Toshiba TC86C001 GOKU-S chip.
|
|
|
|
endif
|
|
|
|
# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
|
|
config BLK_DEV_IDE_PMAC
|
|
tristate "PowerMac on-board IDE support"
|
|
depends on PPC_PMAC
|
|
select IDE_TIMINGS
|
|
select BLK_DEV_IDEDMA_PCI
|
|
help
|
|
This driver provides support for the on-board IDE controller on
|
|
most of the recent Apple Power Macintoshes and PowerBooks.
|
|
If unsure, say Y.
|
|
|
|
config BLK_DEV_IDE_PMAC_ATA100FIRST
|
|
bool "Probe on-board ATA/100 (Kauai) first"
|
|
depends on BLK_DEV_IDE_PMAC
|
|
help
|
|
This option will cause the ATA/100 controller found in UniNorth2
|
|
based machines (Windtunnel PowerMac, Aluminium PowerBooks, ...)
|
|
to be probed before the ATA/66 and ATA/33 controllers. Without
|
|
these, those machine used to have the hard disk on hdc and the
|
|
CD-ROM on hda. This option changes this to more natural hda for
|
|
hard disk and hdc for CD-ROM.
|
|
|
|
config BLK_DEV_IDE_AU1XXX
|
|
bool "IDE for AMD Alchemy Au1200"
|
|
depends on MIPS_ALCHEMY
|
|
select IDE_XFER_MODE
|
|
choice
|
|
prompt "IDE Mode for AMD Alchemy Au1200"
|
|
default BLK_DEV_IDE_AU1XXX_PIO_DBDMA
|
|
depends on BLK_DEV_IDE_AU1XXX
|
|
|
|
config BLK_DEV_IDE_AU1XXX_PIO_DBDMA
|
|
bool "PIO+DbDMA IDE for AMD Alchemy Au1200"
|
|
|
|
config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
|
|
bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200"
|
|
depends on BLK_DEV_IDE_AU1XXX
|
|
endchoice
|
|
|
|
config BLK_DEV_IDE_TX4938
|
|
tristate "TX4938 internal IDE support"
|
|
depends on SOC_TX4938
|
|
select IDE_TIMINGS
|
|
|
|
config BLK_DEV_IDE_TX4939
|
|
tristate "TX4939 internal IDE support"
|
|
depends on SOC_TX4939
|
|
select BLK_DEV_IDEDMA_SFF
|
|
|
|
config BLK_DEV_IDE_ICSIDE
|
|
tristate "ICS IDE interface support"
|
|
depends on ARM && ARCH_ACORN
|
|
help
|
|
On Acorn systems, say Y here if you wish to use the ICS IDE
|
|
interface card. This is not required for ICS partition support.
|
|
If you are unsure, say N to this.
|
|
|
|
config BLK_DEV_IDEDMA_ICS
|
|
bool "ICS DMA support"
|
|
depends on BLK_DEV_IDE_ICSIDE
|
|
help
|
|
Say Y here if you want to add DMA (Direct Memory Access) support to
|
|
the ICS IDE driver.
|
|
|
|
config BLK_DEV_IDE_RAPIDE
|
|
tristate "RapIDE interface support"
|
|
depends on ARM && ARCH_ACORN
|
|
help
|
|
Say Y here if you want to support the Yellowstone RapIDE controller
|
|
manufactured for use with Acorn computers.
|
|
|
|
config BLK_DEV_GAYLE
|
|
tristate "Amiga Gayle IDE interface support"
|
|
depends on AMIGA
|
|
help
|
|
This is the IDE driver for the Amiga Gayle IDE interface. It supports
|
|
both the `A1200 style' and `A4000 style' of the Gayle IDE interface,
|
|
This includes on-board IDE interfaces on some Amiga models (A600,
|
|
A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion
|
|
bus (M-Tech E-Matrix 530 expansion card).
|
|
|
|
It also provides support for the so-called `IDE doublers' (made
|
|
by various manufacturers, e.g. Eyetech) that can be connected to
|
|
the on-board IDE interface of some Amiga models. Using such an IDE
|
|
doubler, you can connect up to four instead of two IDE devices to
|
|
the Amiga's on-board IDE interface. The feature is enabled at kernel
|
|
runtime using the "gayle.doubler" kernel boot parameter.
|
|
|
|
Say Y if you have an Amiga with a Gayle IDE interface and want to use
|
|
IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
|
|
it.
|
|
|
|
Note that you also have to enable Zorro bus support if you want to
|
|
use Gayle IDE interfaces on the Zorro expansion bus.
|
|
|
|
config BLK_DEV_BUDDHA
|
|
tristate "Buddha/Catweasel/X-Surf IDE interface support"
|
|
depends on ZORRO
|
|
help
|
|
This is the IDE driver for the IDE interfaces on the Buddha, Catweasel
|
|
and X-Surf expansion boards. It supports up to two interfaces on the
|
|
Buddha, three on the Catweasel and two on the X-Surf.
|
|
|
|
Say Y if you have a Buddha or Catweasel expansion board and want to
|
|
use IDE devices (hard disks, CD-ROM drives, etc.) that are connected
|
|
to one of its IDE interfaces.
|
|
|
|
config BLK_DEV_FALCON_IDE
|
|
tristate "Falcon IDE interface support"
|
|
depends on ATARI
|
|
help
|
|
This is the IDE driver for the on-board IDE interface on the Atari
|
|
Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
|
|
disks, CD-ROM drives, etc.) that are connected to the on-board IDE
|
|
interface.
|
|
|
|
config BLK_DEV_MAC_IDE
|
|
tristate "Macintosh Quadra/Powerbook IDE interface support"
|
|
depends on MAC
|
|
help
|
|
This is the IDE driver for the on-board IDE interface on some m68k
|
|
Macintosh models. It supports both the `Quadra style' (used in
|
|
Quadra/ Centris 630 and Performa 588 models) and `Powerbook style'
|
|
(used in the Powerbook 150 and 190 models) IDE interface.
|
|
|
|
Say Y if you have such an Macintosh model and want to use IDE
|
|
devices (hard disks, CD-ROM drives, etc.) that are connected to the
|
|
on-board IDE interface.
|
|
|
|
config BLK_DEV_Q40IDE
|
|
tristate "Q40/Q60 IDE interface support"
|
|
depends on Q40
|
|
help
|
|
Enable the on-board IDE controller in the Q40/Q60. This should
|
|
normally be on; disable it only if you are running a custom hard
|
|
drive subsystem through an expansion card.
|
|
|
|
config BLK_DEV_PALMCHIP_BK3710
|
|
tristate "Palmchip bk3710 IDE controller support"
|
|
depends on ARCH_DAVINCI
|
|
select IDE_TIMINGS
|
|
select BLK_DEV_IDEDMA_SFF
|
|
help
|
|
Say Y here if you want to support the onchip IDE controller on the
|
|
TI DaVinci SoC
|
|
|
|
# no isa -> no vlb
|
|
if ISA && (ALPHA || X86 || MIPS)
|
|
|
|
comment "Other IDE chipsets support"
|
|
comment "Note: most of these also require special kernel boot parameters"
|
|
|
|
config BLK_DEV_4DRIVES
|
|
tristate "Generic 4 drives/port support"
|
|
help
|
|
Certain older chipsets, including the Tekram 690CD, use a single set
|
|
of I/O ports at 0x1f0 to control up to four drives, instead of the
|
|
customary two drives per port. Support for this can be enabled at
|
|
runtime using the "ide-4drives.probe" kernel boot parameter if you
|
|
say Y here.
|
|
|
|
config BLK_DEV_ALI14XX
|
|
tristate "ALI M14xx support"
|
|
select IDE_TIMINGS
|
|
select IDE_LEGACY
|
|
help
|
|
This driver is enabled at runtime using the "ali14xx.probe" kernel
|
|
boot parameter. It enables support for the secondary IDE interface
|
|
of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
|
|
I/O speeds to be set as well.
|
|
See the files <file:Documentation/ide/ide.txt> and
|
|
<file:drivers/ide/ali14xx.c> for more info.
|
|
|
|
config BLK_DEV_DTC2278
|
|
tristate "DTC-2278 support"
|
|
select IDE_XFER_MODE
|
|
select IDE_LEGACY
|
|
help
|
|
This driver is enabled at runtime using the "dtc2278.probe" kernel
|
|
boot parameter. It enables support for the secondary IDE interface
|
|
of the DTC-2278 card, and permits faster I/O speeds to be set as
|
|
well. See the <file:Documentation/ide/ide.txt> and
|
|
<file:drivers/ide/dtc2278.c> files for more info.
|
|
|
|
config BLK_DEV_HT6560B
|
|
tristate "Holtek HT6560B support"
|
|
select IDE_TIMINGS
|
|
select IDE_LEGACY
|
|
help
|
|
This driver is enabled at runtime using the "ht6560b.probe" kernel
|
|
boot parameter. It enables support for the secondary IDE interface
|
|
of the Holtek card, and permits faster I/O speeds to be set as well.
|
|
See the <file:Documentation/ide/ide.txt> and
|
|
<file:drivers/ide/ht6560b.c> files for more info.
|
|
|
|
config BLK_DEV_QD65XX
|
|
tristate "QDI QD65xx support"
|
|
select IDE_TIMINGS
|
|
select IDE_LEGACY
|
|
help
|
|
This driver is enabled at runtime using the "qd65xx.probe" kernel
|
|
boot parameter. It permits faster I/O speeds to be set. See the
|
|
<file:Documentation/ide/ide.txt> and <file:drivers/ide/qd65xx.c>
|
|
for more info.
|
|
|
|
config BLK_DEV_UMC8672
|
|
tristate "UMC-8672 support"
|
|
select IDE_XFER_MODE
|
|
select IDE_LEGACY
|
|
help
|
|
This driver is enabled at runtime using the "umc8672.probe" kernel
|
|
boot parameter. It enables support for the secondary IDE interface
|
|
of the UMC-8672, and permits faster I/O speeds to be set as well.
|
|
See the files <file:Documentation/ide/ide.txt> and
|
|
<file:drivers/ide/umc8672.c> for more info.
|
|
|
|
endif
|
|
|
|
config BLK_DEV_IDEDMA
|
|
def_bool BLK_DEV_IDEDMA_SFF || \
|
|
BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
|
|
select IDE_XFER_MODE
|
|
|
|
endif # IDE
|