linux-stable/arch/x86/xen/xen-asm.S
Peter Zijlstra f94909ceb1 x86: Prepare asm files for straight-line-speculation
Replace all ret/retq instructions with RET in preparation of making
RET a macro. Since AS is case insensitive it's a big no-op without
RET defined.

  find arch/x86/ -name \*.S | while read file
  do
	sed -i 's/\<ret[q]*\>/RET/' $file
  done

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134907.905503893@infradead.org
2021-12-08 12:25:37 +01:00

299 lines
7.3 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Asm versions of Xen pv-ops, suitable for direct use.
*
* We only bother with direct forms (ie, vcpu in percpu data) of the
* operations here; the indirect forms are better handled in C.
*/
#include <asm/errno.h>
#include <asm/asm-offsets.h>
#include <asm/percpu.h>
#include <asm/processor-flags.h>
#include <asm/segment.h>
#include <asm/thread_info.h>
#include <asm/asm.h>
#include <asm/frame.h>
#include <asm/unwind_hints.h>
#include <xen/interface/xen.h>
#include <linux/init.h>
#include <linux/linkage.h>
#include <../entry/calling.h>
.pushsection .noinstr.text, "ax"
/*
* Disabling events is simply a matter of making the event mask
* non-zero.
*/
SYM_FUNC_START(xen_irq_disable_direct)
movb $1, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
RET
SYM_FUNC_END(xen_irq_disable_direct)
/*
* Force an event check by making a hypercall, but preserve regs
* before making the call.
*/
SYM_FUNC_START(check_events)
FRAME_BEGIN
push %rax
push %rcx
push %rdx
push %rsi
push %rdi
push %r8
push %r9
push %r10
push %r11
call xen_force_evtchn_callback
pop %r11
pop %r10
pop %r9
pop %r8
pop %rdi
pop %rsi
pop %rdx
pop %rcx
pop %rax
FRAME_END
RET
SYM_FUNC_END(check_events)
/*
* Enable events. This clears the event mask and tests the pending
* event status with one and operation. If there are pending events,
* then enter the hypervisor to get them handled.
*/
SYM_FUNC_START(xen_irq_enable_direct)
FRAME_BEGIN
/* Unmask events */
movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
/*
* Preempt here doesn't matter because that will deal with any
* pending interrupts. The pending check may end up being run
* on the wrong CPU, but that doesn't hurt.
*/
/* Test for pending */
testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
jz 1f
call check_events
1:
FRAME_END
RET
SYM_FUNC_END(xen_irq_enable_direct)
/*
* (xen_)save_fl is used to get the current interrupt enable status.
* Callers expect the status to be in X86_EFLAGS_IF, and other bits
* may be set in the return value. We take advantage of this by
* making sure that X86_EFLAGS_IF has the right value (and other bits
* in that byte are 0), but other bits in the return value are
* undefined. We need to toggle the state of the bit, because Xen and
* x86 use opposite senses (mask vs enable).
*/
SYM_FUNC_START(xen_save_fl_direct)
testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
setz %ah
addb %ah, %ah
RET
SYM_FUNC_END(xen_save_fl_direct)
SYM_FUNC_START(xen_read_cr2)
FRAME_BEGIN
_ASM_MOV PER_CPU_VAR(xen_vcpu), %_ASM_AX
_ASM_MOV XEN_vcpu_info_arch_cr2(%_ASM_AX), %_ASM_AX
FRAME_END
RET
SYM_FUNC_END(xen_read_cr2);
SYM_FUNC_START(xen_read_cr2_direct)
FRAME_BEGIN
_ASM_MOV PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_arch_cr2, %_ASM_AX
FRAME_END
RET
SYM_FUNC_END(xen_read_cr2_direct);
.popsection
.macro xen_pv_trap name
SYM_CODE_START(xen_\name)
UNWIND_HINT_EMPTY
pop %rcx
pop %r11
jmp \name
SYM_CODE_END(xen_\name)
_ASM_NOKPROBE(xen_\name)
.endm
xen_pv_trap asm_exc_divide_error
xen_pv_trap asm_xenpv_exc_debug
xen_pv_trap asm_exc_int3
xen_pv_trap asm_xenpv_exc_nmi
xen_pv_trap asm_exc_overflow
xen_pv_trap asm_exc_bounds
xen_pv_trap asm_exc_invalid_op
xen_pv_trap asm_exc_device_not_available
xen_pv_trap asm_xenpv_exc_double_fault
xen_pv_trap asm_exc_coproc_segment_overrun
xen_pv_trap asm_exc_invalid_tss
xen_pv_trap asm_exc_segment_not_present
xen_pv_trap asm_exc_stack_segment
xen_pv_trap asm_exc_general_protection
xen_pv_trap asm_exc_page_fault
xen_pv_trap asm_exc_spurious_interrupt_bug
xen_pv_trap asm_exc_coprocessor_error
xen_pv_trap asm_exc_alignment_check
#ifdef CONFIG_X86_MCE
xen_pv_trap asm_xenpv_exc_machine_check
#endif /* CONFIG_X86_MCE */
xen_pv_trap asm_exc_simd_coprocessor_error
#ifdef CONFIG_IA32_EMULATION
xen_pv_trap entry_INT80_compat
#endif
xen_pv_trap asm_exc_xen_unknown_trap
xen_pv_trap asm_exc_xen_hypervisor_callback
__INIT
SYM_CODE_START(xen_early_idt_handler_array)
i = 0
.rept NUM_EXCEPTION_VECTORS
UNWIND_HINT_EMPTY
pop %rcx
pop %r11
jmp early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE
i = i + 1
.fill xen_early_idt_handler_array + i*XEN_EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
.endr
SYM_CODE_END(xen_early_idt_handler_array)
__FINIT
hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
/*
* Xen64 iret frame:
*
* ss
* rsp
* rflags
* cs
* rip <-- standard iret frame
*
* flags
*
* rcx }
* r11 }<-- pushed by hypercall page
* rsp->rax }
*/
SYM_CODE_START(xen_iret)
UNWIND_HINT_EMPTY
pushq $0
jmp hypercall_iret
SYM_CODE_END(xen_iret)
/*
* XEN pv doesn't use trampoline stack, PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is
* also the kernel stack. Reusing swapgs_restore_regs_and_return_to_usermode()
* in XEN pv would cause %rsp to move up to the top of the kernel stack and
* leave the IRET frame below %rsp, which is dangerous to be corrupted if #NMI
* interrupts. And swapgs_restore_regs_and_return_to_usermode() pushing the IRET
* frame at the same address is useless.
*/
SYM_CODE_START(xenpv_restore_regs_and_return_to_usermode)
UNWIND_HINT_REGS
POP_REGS
/* stackleak_erase() can work safely on the kernel stack. */
STACKLEAK_ERASE_NOCLOBBER
addq $8, %rsp /* skip regs->orig_ax */
jmp xen_iret
SYM_CODE_END(xenpv_restore_regs_and_return_to_usermode)
/*
* Xen handles syscall callbacks much like ordinary exceptions, which
* means we have:
* - kernel gs
* - kernel rsp
* - an iret-like stack frame on the stack (including rcx and r11):
* ss
* rsp
* rflags
* cs
* rip
* r11
* rsp->rcx
*/
/* Normal 64-bit system call target */
SYM_CODE_START(xen_syscall_target)
UNWIND_HINT_EMPTY
popq %rcx
popq %r11
/*
* Neither Xen nor the kernel really knows what the old SS and
* CS were. The kernel expects __USER_DS and __USER_CS, so
* report those values even though Xen will guess its own values.
*/
movq $__USER_DS, 4*8(%rsp)
movq $__USER_CS, 1*8(%rsp)
jmp entry_SYSCALL_64_after_hwframe
SYM_CODE_END(xen_syscall_target)
#ifdef CONFIG_IA32_EMULATION
/* 32-bit compat syscall target */
SYM_CODE_START(xen_syscall32_target)
UNWIND_HINT_EMPTY
popq %rcx
popq %r11
/*
* Neither Xen nor the kernel really knows what the old SS and
* CS were. The kernel expects __USER32_DS and __USER32_CS, so
* report those values even though Xen will guess its own values.
*/
movq $__USER32_DS, 4*8(%rsp)
movq $__USER32_CS, 1*8(%rsp)
jmp entry_SYSCALL_compat_after_hwframe
SYM_CODE_END(xen_syscall32_target)
/* 32-bit compat sysenter target */
SYM_CODE_START(xen_sysenter_target)
UNWIND_HINT_EMPTY
/*
* NB: Xen is polite and clears TF from EFLAGS for us. This means
* that we don't need to guard against single step exceptions here.
*/
popq %rcx
popq %r11
/*
* Neither Xen nor the kernel really knows what the old SS and
* CS were. The kernel expects __USER32_DS and __USER32_CS, so
* report those values even though Xen will guess its own values.
*/
movq $__USER32_DS, 4*8(%rsp)
movq $__USER32_CS, 1*8(%rsp)
jmp entry_SYSENTER_compat_after_hwframe
SYM_CODE_END(xen_sysenter_target)
#else /* !CONFIG_IA32_EMULATION */
SYM_CODE_START(xen_syscall32_target)
SYM_CODE_START(xen_sysenter_target)
UNWIND_HINT_EMPTY
lea 16(%rsp), %rsp /* strip %rcx, %r11 */
mov $-ENOSYS, %rax
pushq $0
jmp hypercall_iret
SYM_CODE_END(xen_sysenter_target)
SYM_CODE_END(xen_syscall32_target)
#endif /* CONFIG_IA32_EMULATION */