linux-stable/include/linux/comedi/comedi_8254.h
Ian Abbott 44fb7affcf comedi: Move "comedi_8254.h" to <linux/comedi/comedi_8254.h>
Some of the header files in "drivers/comedi/drivers/" are common enough
to be useful to out-of-tree comedi driver modules.  Using them for
out-of-tree module builds is hampered by the headers being outside the
"include/" directory so it is desirable to move them.

There are about a couple of dozen or so Comedi device drivers that use
the "comedi_8254" module to add timers based on the venerable 8254
Programmable Interval Timer chip.  The macros and declarations to use
that module are in the "comedi_8254.h" header file in the comedi
"drivers" directory.  Move it into "include/linux/comedi/".

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211117120604.117740-5-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26 16:48:59 +01:00

134 lines
4.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* comedi_8254.h
* Generic 8254 timer/counter support
* Copyright (C) 2014 H Hartley Sweeten <hsweeten@visionengravers.com>
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 2000 David A. Schleef <ds@schleef.org>
*/
#ifndef _COMEDI_8254_H
#define _COMEDI_8254_H
#include <linux/types.h>
struct comedi_device;
struct comedi_insn;
struct comedi_subdevice;
/*
* Common oscillator base values in nanoseconds
*/
#define I8254_OSC_BASE_10MHZ 100
#define I8254_OSC_BASE_5MHZ 200
#define I8254_OSC_BASE_4MHZ 250
#define I8254_OSC_BASE_2MHZ 500
#define I8254_OSC_BASE_1MHZ 1000
#define I8254_OSC_BASE_100KHZ 10000
#define I8254_OSC_BASE_10KHZ 100000
#define I8254_OSC_BASE_1KHZ 1000000
/*
* I/O access size used to read/write registers
*/
#define I8254_IO8 1
#define I8254_IO16 2
#define I8254_IO32 4
/*
* Register map for generic 8254 timer (I8254_IO8 with 0 regshift)
*/
#define I8254_COUNTER0_REG 0x00
#define I8254_COUNTER1_REG 0x01
#define I8254_COUNTER2_REG 0x02
#define I8254_CTRL_REG 0x03
#define I8254_CTRL_SEL_CTR(x) ((x) << 6)
#define I8254_CTRL_READBACK(x) (I8254_CTRL_SEL_CTR(3) | BIT(x))
#define I8254_CTRL_READBACK_COUNT I8254_CTRL_READBACK(4)
#define I8254_CTRL_READBACK_STATUS I8254_CTRL_READBACK(5)
#define I8254_CTRL_READBACK_SEL_CTR(x) (2 << (x))
#define I8254_CTRL_RW(x) (((x) & 0x3) << 4)
#define I8254_CTRL_LATCH I8254_CTRL_RW(0)
#define I8254_CTRL_LSB_ONLY I8254_CTRL_RW(1)
#define I8254_CTRL_MSB_ONLY I8254_CTRL_RW(2)
#define I8254_CTRL_LSB_MSB I8254_CTRL_RW(3)
/* counter maps zero to 0x10000 */
#define I8254_MAX_COUNT 0x10000
/**
* struct comedi_8254 - private data used by this module
* @iobase: PIO base address of the registers (in/out)
* @mmio: MMIO base address of the registers (read/write)
* @iosize: I/O size used to access the registers (b/w/l)
* @regshift: register gap shift
* @osc_base: cascaded oscillator speed in ns
* @divisor: divisor for single counter
* @divisor1: divisor loaded into first cascaded counter
* @divisor2: divisor loaded into second cascaded counter
* #next_div: next divisor for single counter
* @next_div1: next divisor to use for first cascaded counter
* @next_div2: next divisor to use for second cascaded counter
* @clock_src; current clock source for each counter (driver specific)
* @gate_src; current gate source for each counter (driver specific)
* @busy: flags used to indicate that a counter is "busy"
* @insn_config: driver specific (*insn_config) callback
*/
struct comedi_8254 {
unsigned long iobase;
void __iomem *mmio;
unsigned int iosize;
unsigned int regshift;
unsigned int osc_base;
unsigned int divisor;
unsigned int divisor1;
unsigned int divisor2;
unsigned int next_div;
unsigned int next_div1;
unsigned int next_div2;
unsigned int clock_src[3];
unsigned int gate_src[3];
bool busy[3];
int (*insn_config)(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data);
};
unsigned int comedi_8254_status(struct comedi_8254 *i8254,
unsigned int counter);
unsigned int comedi_8254_read(struct comedi_8254 *i8254, unsigned int counter);
void comedi_8254_write(struct comedi_8254 *i8254,
unsigned int counter, unsigned int val);
int comedi_8254_set_mode(struct comedi_8254 *i8254,
unsigned int counter, unsigned int mode);
int comedi_8254_load(struct comedi_8254 *i8254,
unsigned int counter, unsigned int val, unsigned int mode);
void comedi_8254_pacer_enable(struct comedi_8254 *i8254,
unsigned int counter1, unsigned int counter2,
bool enable);
void comedi_8254_update_divisors(struct comedi_8254 *i8254);
void comedi_8254_cascade_ns_to_timer(struct comedi_8254 *i8254,
unsigned int *nanosec, unsigned int flags);
void comedi_8254_ns_to_timer(struct comedi_8254 *i8254,
unsigned int *nanosec, unsigned int flags);
void comedi_8254_set_busy(struct comedi_8254 *i8254,
unsigned int counter, bool busy);
void comedi_8254_subdevice_init(struct comedi_subdevice *s,
struct comedi_8254 *i8254);
struct comedi_8254 *comedi_8254_init(unsigned long iobase,
unsigned int osc_base,
unsigned int iosize,
unsigned int regshift);
struct comedi_8254 *comedi_8254_mm_init(void __iomem *mmio,
unsigned int osc_base,
unsigned int iosize,
unsigned int regshift);
#endif /* _COMEDI_8254_H */