mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-22 08:49:45 +00:00
![Douglas Anderson](/assets/img/avatar_default.png)
Drivers tend to want to define the names of their regulators somewhere in their source file as "static const". This means, inevitable, that every driver out there open codes something like this: static const char * const supply_names[] = { "vcc", "vccl", }; static int get_regulators(struct my_data *data) { int i; data->supplies = devm_kzalloc(...) if (!data->supplies) return -ENOMEM; for (i = 0; i < ARRAY_SIZE(supply_names); i++) data->supplies[i].supply = supply_names[i]; return devm_regulator_bulk_get(data->dev, ARRAY_SIZE(supply_names), data->supplies); } Let's make this more convenient by doing providing a helper that does the copy. I have chosen to have the "const" input structure here be the exact same structure as the normal one passed to devm_regulator_bulk_get(). This is slightly inefficent since the input data can't possibly have anything useful for "ret" or consumer and thus we waste 8 bytes per structure. This seems an OK tradeoff for not introducing an extra structure. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220726103631.v2.6.I38fc508a73135a5c1b873851f3553ff2a3a625f5@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
680 lines
20 KiB
C
680 lines
20 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* consumer.h -- SoC Regulator consumer support.
|
|
*
|
|
* Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
|
|
*
|
|
* Author: Liam Girdwood <lrg@slimlogic.co.uk>
|
|
*
|
|
* Regulator Consumer Interface.
|
|
*
|
|
* A Power Management Regulator framework for SoC based devices.
|
|
* Features:-
|
|
* o Voltage and current level control.
|
|
* o Operating mode control.
|
|
* o Regulator status.
|
|
* o sysfs entries for showing client devices and status
|
|
*
|
|
* EXPERIMENTAL FEATURES:
|
|
* Dynamic Regulator operating Mode Switching (DRMS) - allows regulators
|
|
* to use most efficient operating mode depending upon voltage and load and
|
|
* is transparent to client drivers.
|
|
*
|
|
* e.g. Devices x,y,z share regulator r. Device x and y draw 20mA each during
|
|
* IO and 1mA at idle. Device z draws 100mA when under load and 5mA when
|
|
* idling. Regulator r has > 90% efficiency in NORMAL mode at loads > 100mA
|
|
* but this drops rapidly to 60% when below 100mA. Regulator r has > 90%
|
|
* efficiency in IDLE mode at loads < 10mA. Thus regulator r will operate
|
|
* in normal mode for loads > 10mA and in IDLE mode for load <= 10mA.
|
|
*/
|
|
|
|
#ifndef __LINUX_REGULATOR_CONSUMER_H_
|
|
#define __LINUX_REGULATOR_CONSUMER_H_
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/suspend.h>
|
|
|
|
struct device;
|
|
struct notifier_block;
|
|
struct regmap;
|
|
struct regulator_dev;
|
|
|
|
/*
|
|
* Regulator operating modes.
|
|
*
|
|
* Regulators can run in a variety of different operating modes depending on
|
|
* output load. This allows further system power savings by selecting the
|
|
* best (and most efficient) regulator mode for a desired load.
|
|
*
|
|
* Most drivers will only care about NORMAL. The modes below are generic and
|
|
* will probably not match the naming convention of your regulator data sheet
|
|
* but should match the use cases in the datasheet.
|
|
*
|
|
* In order of power efficiency (least efficient at top).
|
|
*
|
|
* Mode Description
|
|
* FAST Regulator can handle fast changes in it's load.
|
|
* e.g. useful in CPU voltage & frequency scaling where
|
|
* load can quickly increase with CPU frequency increases.
|
|
*
|
|
* NORMAL Normal regulator power supply mode. Most drivers will
|
|
* use this mode.
|
|
*
|
|
* IDLE Regulator runs in a more efficient mode for light
|
|
* loads. Can be used for devices that have a low power
|
|
* requirement during periods of inactivity. This mode
|
|
* may be more noisy than NORMAL and may not be able
|
|
* to handle fast load switching.
|
|
*
|
|
* STANDBY Regulator runs in the most efficient mode for very
|
|
* light loads. Can be used by devices when they are
|
|
* in a sleep/standby state. This mode is likely to be
|
|
* the most noisy and may not be able to handle fast load
|
|
* switching.
|
|
*
|
|
* NOTE: Most regulators will only support a subset of these modes. Some
|
|
* will only just support NORMAL.
|
|
*
|
|
* These modes can be OR'ed together to make up a mask of valid register modes.
|
|
*/
|
|
|
|
#define REGULATOR_MODE_INVALID 0x0
|
|
#define REGULATOR_MODE_FAST 0x1
|
|
#define REGULATOR_MODE_NORMAL 0x2
|
|
#define REGULATOR_MODE_IDLE 0x4
|
|
#define REGULATOR_MODE_STANDBY 0x8
|
|
|
|
/*
|
|
* Regulator notifier events.
|
|
*
|
|
* UNDER_VOLTAGE Regulator output is under voltage.
|
|
* OVER_CURRENT Regulator output current is too high.
|
|
* REGULATION_OUT Regulator output is out of regulation.
|
|
* FAIL Regulator output has failed.
|
|
* OVER_TEMP Regulator over temp.
|
|
* FORCE_DISABLE Regulator forcibly shut down by software.
|
|
* VOLTAGE_CHANGE Regulator voltage changed.
|
|
* Data passed is old voltage cast to (void *).
|
|
* DISABLE Regulator was disabled.
|
|
* PRE_VOLTAGE_CHANGE Regulator is about to have voltage changed.
|
|
* Data passed is "struct pre_voltage_change_data"
|
|
* ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason.
|
|
* Data passed is old voltage cast to (void *).
|
|
* PRE_DISABLE Regulator is about to be disabled
|
|
* ABORT_DISABLE Regulator disable failed for some reason
|
|
*
|
|
* NOTE: These events can be OR'ed together when passed into handler.
|
|
*/
|
|
|
|
#define REGULATOR_EVENT_UNDER_VOLTAGE 0x01
|
|
#define REGULATOR_EVENT_OVER_CURRENT 0x02
|
|
#define REGULATOR_EVENT_REGULATION_OUT 0x04
|
|
#define REGULATOR_EVENT_FAIL 0x08
|
|
#define REGULATOR_EVENT_OVER_TEMP 0x10
|
|
#define REGULATOR_EVENT_FORCE_DISABLE 0x20
|
|
#define REGULATOR_EVENT_VOLTAGE_CHANGE 0x40
|
|
#define REGULATOR_EVENT_DISABLE 0x80
|
|
#define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE 0x100
|
|
#define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE 0x200
|
|
#define REGULATOR_EVENT_PRE_DISABLE 0x400
|
|
#define REGULATOR_EVENT_ABORT_DISABLE 0x800
|
|
#define REGULATOR_EVENT_ENABLE 0x1000
|
|
/*
|
|
* Following notifications should be emitted only if detected condition
|
|
* is such that the HW is likely to still be working but consumers should
|
|
* take a recovery action to prevent problems esacalating into errors.
|
|
*/
|
|
#define REGULATOR_EVENT_UNDER_VOLTAGE_WARN 0x2000
|
|
#define REGULATOR_EVENT_OVER_CURRENT_WARN 0x4000
|
|
#define REGULATOR_EVENT_OVER_VOLTAGE_WARN 0x8000
|
|
#define REGULATOR_EVENT_OVER_TEMP_WARN 0x10000
|
|
#define REGULATOR_EVENT_WARN_MASK 0x1E000
|
|
|
|
/*
|
|
* Regulator errors that can be queried using regulator_get_error_flags
|
|
*
|
|
* UNDER_VOLTAGE Regulator output is under voltage.
|
|
* OVER_CURRENT Regulator output current is too high.
|
|
* REGULATION_OUT Regulator output is out of regulation.
|
|
* FAIL Regulator output has failed.
|
|
* OVER_TEMP Regulator over temp.
|
|
*
|
|
* NOTE: These errors can be OR'ed together.
|
|
*/
|
|
|
|
#define REGULATOR_ERROR_UNDER_VOLTAGE BIT(1)
|
|
#define REGULATOR_ERROR_OVER_CURRENT BIT(2)
|
|
#define REGULATOR_ERROR_REGULATION_OUT BIT(3)
|
|
#define REGULATOR_ERROR_FAIL BIT(4)
|
|
#define REGULATOR_ERROR_OVER_TEMP BIT(5)
|
|
|
|
#define REGULATOR_ERROR_UNDER_VOLTAGE_WARN BIT(6)
|
|
#define REGULATOR_ERROR_OVER_CURRENT_WARN BIT(7)
|
|
#define REGULATOR_ERROR_OVER_VOLTAGE_WARN BIT(8)
|
|
#define REGULATOR_ERROR_OVER_TEMP_WARN BIT(9)
|
|
|
|
/**
|
|
* struct pre_voltage_change_data - Data sent with PRE_VOLTAGE_CHANGE event
|
|
*
|
|
* @old_uV: Current voltage before change.
|
|
* @min_uV: Min voltage we'll change to.
|
|
* @max_uV: Max voltage we'll change to.
|
|
*/
|
|
struct pre_voltage_change_data {
|
|
unsigned long old_uV;
|
|
unsigned long min_uV;
|
|
unsigned long max_uV;
|
|
};
|
|
|
|
struct regulator;
|
|
|
|
/**
|
|
* struct regulator_bulk_data - Data used for bulk regulator operations.
|
|
*
|
|
* @supply: The name of the supply. Initialised by the user before
|
|
* using the bulk regulator APIs.
|
|
* @init_load_uA: After getting the regulator, regulator_set_load() will be
|
|
* called with this load. Initialised by the user before
|
|
* using the bulk regulator APIs.
|
|
* @consumer: The regulator consumer for the supply. This will be managed
|
|
* by the bulk API.
|
|
*
|
|
* The regulator APIs provide a series of regulator_bulk_() API calls as
|
|
* a convenience to consumers which require multiple supplies. This
|
|
* structure is used to manage data for these calls.
|
|
*/
|
|
struct regulator_bulk_data {
|
|
const char *supply;
|
|
int init_load_uA;
|
|
struct regulator *consumer;
|
|
|
|
/* private: Internal use */
|
|
int ret;
|
|
};
|
|
|
|
#if defined(CONFIG_REGULATOR)
|
|
|
|
/* regulator get and put */
|
|
struct regulator *__must_check regulator_get(struct device *dev,
|
|
const char *id);
|
|
struct regulator *__must_check devm_regulator_get(struct device *dev,
|
|
const char *id);
|
|
struct regulator *__must_check regulator_get_exclusive(struct device *dev,
|
|
const char *id);
|
|
struct regulator *__must_check devm_regulator_get_exclusive(struct device *dev,
|
|
const char *id);
|
|
struct regulator *__must_check regulator_get_optional(struct device *dev,
|
|
const char *id);
|
|
struct regulator *__must_check devm_regulator_get_optional(struct device *dev,
|
|
const char *id);
|
|
void regulator_put(struct regulator *regulator);
|
|
void devm_regulator_put(struct regulator *regulator);
|
|
|
|
int regulator_register_supply_alias(struct device *dev, const char *id,
|
|
struct device *alias_dev,
|
|
const char *alias_id);
|
|
void regulator_unregister_supply_alias(struct device *dev, const char *id);
|
|
|
|
int regulator_bulk_register_supply_alias(struct device *dev,
|
|
const char *const *id,
|
|
struct device *alias_dev,
|
|
const char *const *alias_id,
|
|
int num_id);
|
|
void regulator_bulk_unregister_supply_alias(struct device *dev,
|
|
const char * const *id, int num_id);
|
|
|
|
int devm_regulator_register_supply_alias(struct device *dev, const char *id,
|
|
struct device *alias_dev,
|
|
const char *alias_id);
|
|
|
|
int devm_regulator_bulk_register_supply_alias(struct device *dev,
|
|
const char *const *id,
|
|
struct device *alias_dev,
|
|
const char *const *alias_id,
|
|
int num_id);
|
|
|
|
/* regulator output control and status */
|
|
int __must_check regulator_enable(struct regulator *regulator);
|
|
int regulator_disable(struct regulator *regulator);
|
|
int regulator_force_disable(struct regulator *regulator);
|
|
int regulator_is_enabled(struct regulator *regulator);
|
|
int regulator_disable_deferred(struct regulator *regulator, int ms);
|
|
|
|
int __must_check regulator_bulk_get(struct device *dev, int num_consumers,
|
|
struct regulator_bulk_data *consumers);
|
|
int __must_check devm_regulator_bulk_get(struct device *dev, int num_consumers,
|
|
struct regulator_bulk_data *consumers);
|
|
int __must_check devm_regulator_bulk_get_const(
|
|
struct device *dev, int num_consumers,
|
|
const struct regulator_bulk_data *in_consumers,
|
|
struct regulator_bulk_data **out_consumers);
|
|
int __must_check regulator_bulk_enable(int num_consumers,
|
|
struct regulator_bulk_data *consumers);
|
|
int regulator_bulk_disable(int num_consumers,
|
|
struct regulator_bulk_data *consumers);
|
|
int regulator_bulk_force_disable(int num_consumers,
|
|
struct regulator_bulk_data *consumers);
|
|
void regulator_bulk_free(int num_consumers,
|
|
struct regulator_bulk_data *consumers);
|
|
|
|
int regulator_count_voltages(struct regulator *regulator);
|
|
int regulator_list_voltage(struct regulator *regulator, unsigned selector);
|
|
int regulator_is_supported_voltage(struct regulator *regulator,
|
|
int min_uV, int max_uV);
|
|
unsigned int regulator_get_linear_step(struct regulator *regulator);
|
|
int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
|
|
int regulator_set_voltage_time(struct regulator *regulator,
|
|
int old_uV, int new_uV);
|
|
int regulator_get_voltage(struct regulator *regulator);
|
|
int regulator_sync_voltage(struct regulator *regulator);
|
|
int regulator_set_current_limit(struct regulator *regulator,
|
|
int min_uA, int max_uA);
|
|
int regulator_get_current_limit(struct regulator *regulator);
|
|
|
|
int regulator_set_mode(struct regulator *regulator, unsigned int mode);
|
|
unsigned int regulator_get_mode(struct regulator *regulator);
|
|
int regulator_get_error_flags(struct regulator *regulator,
|
|
unsigned int *flags);
|
|
int regulator_set_load(struct regulator *regulator, int load_uA);
|
|
|
|
int regulator_allow_bypass(struct regulator *regulator, bool allow);
|
|
|
|
struct regmap *regulator_get_regmap(struct regulator *regulator);
|
|
int regulator_get_hardware_vsel_register(struct regulator *regulator,
|
|
unsigned *vsel_reg,
|
|
unsigned *vsel_mask);
|
|
int regulator_list_hardware_vsel(struct regulator *regulator,
|
|
unsigned selector);
|
|
|
|
/* regulator notifier block */
|
|
int regulator_register_notifier(struct regulator *regulator,
|
|
struct notifier_block *nb);
|
|
int devm_regulator_register_notifier(struct regulator *regulator,
|
|
struct notifier_block *nb);
|
|
int regulator_unregister_notifier(struct regulator *regulator,
|
|
struct notifier_block *nb);
|
|
void devm_regulator_unregister_notifier(struct regulator *regulator,
|
|
struct notifier_block *nb);
|
|
|
|
/* regulator suspend */
|
|
int regulator_suspend_enable(struct regulator_dev *rdev,
|
|
suspend_state_t state);
|
|
int regulator_suspend_disable(struct regulator_dev *rdev,
|
|
suspend_state_t state);
|
|
int regulator_set_suspend_voltage(struct regulator *regulator, int min_uV,
|
|
int max_uV, suspend_state_t state);
|
|
|
|
/* driver data - core doesn't touch */
|
|
void *regulator_get_drvdata(struct regulator *regulator);
|
|
void regulator_set_drvdata(struct regulator *regulator, void *data);
|
|
|
|
/* misc helpers */
|
|
|
|
void regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
|
|
const char *const *supply_names,
|
|
unsigned int num_supplies);
|
|
|
|
bool regulator_is_equal(struct regulator *reg1, struct regulator *reg2);
|
|
|
|
#else
|
|
|
|
/*
|
|
* Make sure client drivers will still build on systems with no software
|
|
* controllable voltage or current regulators.
|
|
*/
|
|
static inline struct regulator *__must_check regulator_get(struct device *dev,
|
|
const char *id)
|
|
{
|
|
/* Nothing except the stubbed out regulator API should be
|
|
* looking at the value except to check if it is an error
|
|
* value. Drivers are free to handle NULL specifically by
|
|
* skipping all regulator API calls, but they don't have to.
|
|
* Drivers which don't, should make sure they properly handle
|
|
* corner cases of the API, such as regulator_get_voltage()
|
|
* returning 0.
|
|
*/
|
|
return NULL;
|
|
}
|
|
|
|
static inline struct regulator *__must_check
|
|
devm_regulator_get(struct device *dev, const char *id)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
static inline struct regulator *__must_check
|
|
regulator_get_exclusive(struct device *dev, const char *id)
|
|
{
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
static inline struct regulator *__must_check
|
|
devm_regulator_get_exclusive(struct device *dev, const char *id)
|
|
{
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
static inline struct regulator *__must_check
|
|
regulator_get_optional(struct device *dev, const char *id)
|
|
{
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
|
|
static inline struct regulator *__must_check
|
|
devm_regulator_get_optional(struct device *dev, const char *id)
|
|
{
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
static inline void regulator_put(struct regulator *regulator)
|
|
{
|
|
}
|
|
|
|
static inline void devm_regulator_put(struct regulator *regulator)
|
|
{
|
|
}
|
|
|
|
static inline int regulator_register_supply_alias(struct device *dev,
|
|
const char *id,
|
|
struct device *alias_dev,
|
|
const char *alias_id)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void regulator_unregister_supply_alias(struct device *dev,
|
|
const char *id)
|
|
{
|
|
}
|
|
|
|
static inline int regulator_bulk_register_supply_alias(struct device *dev,
|
|
const char *const *id,
|
|
struct device *alias_dev,
|
|
const char * const *alias_id,
|
|
int num_id)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void regulator_bulk_unregister_supply_alias(struct device *dev,
|
|
const char * const *id,
|
|
int num_id)
|
|
{
|
|
}
|
|
|
|
static inline int devm_regulator_register_supply_alias(struct device *dev,
|
|
const char *id,
|
|
struct device *alias_dev,
|
|
const char *alias_id)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int devm_regulator_bulk_register_supply_alias(struct device *dev,
|
|
const char *const *id,
|
|
struct device *alias_dev,
|
|
const char *const *alias_id,
|
|
int num_id)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_enable(struct regulator *regulator)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_disable(struct regulator *regulator)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_force_disable(struct regulator *regulator)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_disable_deferred(struct regulator *regulator,
|
|
int ms)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_is_enabled(struct regulator *regulator)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static inline int regulator_bulk_get(struct device *dev,
|
|
int num_consumers,
|
|
struct regulator_bulk_data *consumers)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int devm_regulator_bulk_get(struct device *dev, int num_consumers,
|
|
struct regulator_bulk_data *consumers)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_bulk_enable(int num_consumers,
|
|
struct regulator_bulk_data *consumers)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_bulk_disable(int num_consumers,
|
|
struct regulator_bulk_data *consumers)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_bulk_force_disable(int num_consumers,
|
|
struct regulator_bulk_data *consumers)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void regulator_bulk_free(int num_consumers,
|
|
struct regulator_bulk_data *consumers)
|
|
{
|
|
}
|
|
|
|
static inline int regulator_set_voltage(struct regulator *regulator,
|
|
int min_uV, int max_uV)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_set_voltage_time(struct regulator *regulator,
|
|
int old_uV, int new_uV)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_get_voltage(struct regulator *regulator)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static inline int regulator_sync_voltage(struct regulator *regulator)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static inline int regulator_is_supported_voltage(struct regulator *regulator,
|
|
int min_uV, int max_uV)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline unsigned int regulator_get_linear_step(struct regulator *regulator)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_set_current_limit(struct regulator *regulator,
|
|
int min_uA, int max_uA)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_get_current_limit(struct regulator *regulator)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_set_mode(struct regulator *regulator,
|
|
unsigned int mode)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline unsigned int regulator_get_mode(struct regulator *regulator)
|
|
{
|
|
return REGULATOR_MODE_NORMAL;
|
|
}
|
|
|
|
static inline int regulator_get_error_flags(struct regulator *regulator,
|
|
unsigned int *flags)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static inline int regulator_set_load(struct regulator *regulator, int load_uA)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_allow_bypass(struct regulator *regulator,
|
|
bool allow)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline struct regmap *regulator_get_regmap(struct regulator *regulator)
|
|
{
|
|
return ERR_PTR(-EOPNOTSUPP);
|
|
}
|
|
|
|
static inline int regulator_get_hardware_vsel_register(struct regulator *regulator,
|
|
unsigned *vsel_reg,
|
|
unsigned *vsel_mask)
|
|
{
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static inline int regulator_list_hardware_vsel(struct regulator *regulator,
|
|
unsigned selector)
|
|
{
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static inline int regulator_register_notifier(struct regulator *regulator,
|
|
struct notifier_block *nb)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int devm_regulator_register_notifier(struct regulator *regulator,
|
|
struct notifier_block *nb)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_unregister_notifier(struct regulator *regulator,
|
|
struct notifier_block *nb)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int devm_regulator_unregister_notifier(struct regulator *regulator,
|
|
struct notifier_block *nb)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_suspend_enable(struct regulator_dev *rdev,
|
|
suspend_state_t state)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static inline int regulator_suspend_disable(struct regulator_dev *rdev,
|
|
suspend_state_t state)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static inline int regulator_set_suspend_voltage(struct regulator *regulator,
|
|
int min_uV, int max_uV,
|
|
suspend_state_t state)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static inline void *regulator_get_drvdata(struct regulator *regulator)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
static inline void regulator_set_drvdata(struct regulator *regulator,
|
|
void *data)
|
|
{
|
|
}
|
|
|
|
static inline int regulator_count_voltages(struct regulator *regulator)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int regulator_list_voltage(struct regulator *regulator, unsigned selector)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static inline void
|
|
regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
|
|
const char *const *supply_names,
|
|
unsigned int num_supplies)
|
|
{
|
|
}
|
|
|
|
static inline bool
|
|
regulator_is_equal(struct regulator *reg1, struct regulator *reg2)
|
|
{
|
|
return false;
|
|
}
|
|
#endif
|
|
|
|
static inline int regulator_set_voltage_triplet(struct regulator *regulator,
|
|
int min_uV, int target_uV,
|
|
int max_uV)
|
|
{
|
|
if (regulator_set_voltage(regulator, target_uV, max_uV) == 0)
|
|
return 0;
|
|
|
|
return regulator_set_voltage(regulator, min_uV, max_uV);
|
|
}
|
|
|
|
static inline int regulator_set_voltage_tol(struct regulator *regulator,
|
|
int new_uV, int tol_uV)
|
|
{
|
|
if (regulator_set_voltage(regulator, new_uV, new_uV + tol_uV) == 0)
|
|
return 0;
|
|
else
|
|
return regulator_set_voltage(regulator,
|
|
new_uV - tol_uV, new_uV + tol_uV);
|
|
}
|
|
|
|
static inline int regulator_is_supported_voltage_tol(struct regulator *regulator,
|
|
int target_uV, int tol_uV)
|
|
{
|
|
return regulator_is_supported_voltage(regulator,
|
|
target_uV - tol_uV,
|
|
target_uV + tol_uV);
|
|
}
|
|
|
|
#endif
|