linux-stable/arch/x86/include/asm/x86_init.h
David Woodhouse ab0f59c6f1 x86/apic: Support 15 bits of APIC ID in MSI where available
Some hypervisors can allow the guest to use the Extended Destination ID
field in the MSI address to address up to 32768 CPUs.

This applies to all downstream devices which generate MSI cycles,
including HPET, I/O-APIC and PCI MSI.

HPET and PCI MSI use the same __irq_msi_compose_msg() function, while
I/O-APIC generates its own and had support for the extended bits added in
a previous commit.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-33-dwmw2@infradead.org
2020-10-28 20:26:29 +01:00

316 lines
9.9 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_X86_PLATFORM_H
#define _ASM_X86_PLATFORM_H
#include <asm/bootparam.h>
struct ghcb;
struct mpc_bus;
struct mpc_cpu;
struct pt_regs;
struct mpc_table;
struct cpuinfo_x86;
struct irq_domain;
/**
* struct x86_init_mpparse - platform specific mpparse ops
* @setup_ioapic_ids: platform specific ioapic id override
* @find_smp_config: find the smp configuration
* @get_smp_config: get the smp configuration
*/
struct x86_init_mpparse {
void (*setup_ioapic_ids)(void);
void (*find_smp_config)(void);
void (*get_smp_config)(unsigned int early);
};
/**
* struct x86_init_resources - platform specific resource related ops
* @probe_roms: probe BIOS roms
* @reserve_resources: reserve the standard resources for the
* platform
* @memory_setup: platform specific memory setup
*
*/
struct x86_init_resources {
void (*probe_roms)(void);
void (*reserve_resources)(void);
char *(*memory_setup)(void);
};
/**
* struct x86_init_irqs - platform specific interrupt setup
* @pre_vector_init: init code to run before interrupt vectors
* are set up.
* @intr_init: interrupt init code
* @intr_mode_select: interrupt delivery mode selection
* @intr_mode_init: interrupt delivery mode setup
* @create_pci_msi_domain: Create the PCI/MSI interrupt domain
*/
struct x86_init_irqs {
void (*pre_vector_init)(void);
void (*intr_init)(void);
void (*intr_mode_select)(void);
void (*intr_mode_init)(void);
struct irq_domain *(*create_pci_msi_domain)(void);
};
/**
* struct x86_init_oem - oem platform specific customizing functions
* @arch_setup: platform specific architecture setup
* @banner: print a platform specific banner
*/
struct x86_init_oem {
void (*arch_setup)(void);
void (*banner)(void);
};
/**
* struct x86_init_paging - platform specific paging functions
* @pagetable_init: platform specific paging initialization call to setup
* the kernel pagetables and prepare accessors functions.
* Callback must call paging_init(). Called once after the
* direct mapping for phys memory is available.
*/
struct x86_init_paging {
void (*pagetable_init)(void);
};
/**
* struct x86_init_timers - platform specific timer setup
* @setup_perpcu_clockev: set up the per cpu clock event device for the
* boot cpu
* @timer_init: initialize the platform timer (default PIT/HPET)
* @wallclock_init: init the wallclock device
*/
struct x86_init_timers {
void (*setup_percpu_clockev)(void);
void (*timer_init)(void);
void (*wallclock_init)(void);
};
/**
* struct x86_init_iommu - platform specific iommu setup
* @iommu_init: platform specific iommu setup
*/
struct x86_init_iommu {
int (*iommu_init)(void);
};
/**
* struct x86_init_pci - platform specific pci init functions
* @arch_init: platform specific pci arch init call
* @init: platform specific pci subsystem init
* @init_irq: platform specific pci irq init
* @fixup_irqs: platform specific pci irq fixup
*/
struct x86_init_pci {
int (*arch_init)(void);
int (*init)(void);
void (*init_irq)(void);
void (*fixup_irqs)(void);
};
/**
* struct x86_hyper_init - x86 hypervisor init functions
* @init_platform: platform setup
* @guest_late_init: guest late init
* @x2apic_available: X2APIC detection
* @msi_ext_dest_id: MSI supports 15-bit APIC IDs
* @init_mem_mapping: setup early mappings during init_mem_mapping()
* @init_after_bootmem: guest init after boot allocator is finished
*/
struct x86_hyper_init {
void (*init_platform)(void);
void (*guest_late_init)(void);
bool (*x2apic_available)(void);
bool (*msi_ext_dest_id)(void);
void (*init_mem_mapping)(void);
void (*init_after_bootmem)(void);
};
/**
* struct x86_init_acpi - x86 ACPI init functions
* @set_root_poitner: set RSDP address
* @get_root_pointer: get RSDP address
* @reduced_hw_early_init: hardware reduced platform early init
*/
struct x86_init_acpi {
void (*set_root_pointer)(u64 addr);
u64 (*get_root_pointer)(void);
void (*reduced_hw_early_init)(void);
};
/**
* struct x86_init_ops - functions for platform specific setup
*
*/
struct x86_init_ops {
struct x86_init_resources resources;
struct x86_init_mpparse mpparse;
struct x86_init_irqs irqs;
struct x86_init_oem oem;
struct x86_init_paging paging;
struct x86_init_timers timers;
struct x86_init_iommu iommu;
struct x86_init_pci pci;
struct x86_hyper_init hyper;
struct x86_init_acpi acpi;
};
/**
* struct x86_cpuinit_ops - platform specific cpu hotplug setups
* @setup_percpu_clockev: set up the per cpu clock event device
* @early_percpu_clock_init: early init of the per cpu clock event device
*/
struct x86_cpuinit_ops {
void (*setup_percpu_clockev)(void);
void (*early_percpu_clock_init)(void);
void (*fixup_cpu_id)(struct cpuinfo_x86 *c, int node);
};
struct timespec64;
/**
* struct x86_legacy_devices - legacy x86 devices
*
* @pnpbios: this platform can have a PNPBIOS. If this is disabled the platform
* is known to never have a PNPBIOS.
*
* These are devices known to require LPC or ISA bus. The definition of legacy
* devices adheres to the ACPI 5.2.9.3 IA-PC Boot Architecture flag
* ACPI_FADT_LEGACY_DEVICES. These devices consist of user visible devices on
* the LPC or ISA bus. User visible devices are devices that have end-user
* accessible connectors (for example, LPT parallel port). Legacy devices on
* the LPC bus consist for example of serial and parallel ports, PS/2 keyboard
* / mouse, and the floppy disk controller. A system that lacks all known
* legacy devices can assume all devices can be detected exclusively via
* standard device enumeration mechanisms including the ACPI namespace.
*
* A system which has does not have ACPI_FADT_LEGACY_DEVICES enabled must not
* have any of the legacy devices enumerated below present.
*/
struct x86_legacy_devices {
int pnpbios;
};
/**
* enum x86_legacy_i8042_state - i8042 keyboard controller state
* @X86_LEGACY_I8042_PLATFORM_ABSENT: the controller is always absent on
* given platform/subarch.
* @X86_LEGACY_I8042_FIRMWARE_ABSENT: firmware reports that the controller
* is absent.
* @X86_LEGACY_i8042_EXPECTED_PRESENT: the controller is likely to be
* present, the i8042 driver should probe for controller existence.
*/
enum x86_legacy_i8042_state {
X86_LEGACY_I8042_PLATFORM_ABSENT,
X86_LEGACY_I8042_FIRMWARE_ABSENT,
X86_LEGACY_I8042_EXPECTED_PRESENT,
};
/**
* struct x86_legacy_features - legacy x86 features
*
* @i8042: indicated if we expect the device to have i8042 controller
* present.
* @rtc: this device has a CMOS real-time clock present
* @reserve_bios_regions: boot code will search for the EBDA address and the
* start of the 640k - 1M BIOS region. If false, the platform must
* ensure that its memory map correctly reserves sub-1MB regions as needed.
* @devices: legacy x86 devices, refer to struct x86_legacy_devices
* documentation for further details.
*/
struct x86_legacy_features {
enum x86_legacy_i8042_state i8042;
int rtc;
int warm_reset;
int no_vga;
int reserve_bios_regions;
struct x86_legacy_devices devices;
};
/**
* struct x86_hyper_runtime - x86 hypervisor specific runtime callbacks
*
* @pin_vcpu: pin current vcpu to specified physical
* cpu (run rarely)
* @sev_es_hcall_prepare: Load additional hypervisor-specific
* state into the GHCB when doing a VMMCALL under
* SEV-ES. Called from the #VC exception handler.
* @sev_es_hcall_finish: Copies state from the GHCB back into the
* processor (or pt_regs). Also runs checks on the
* state returned from the hypervisor after a
* VMMCALL under SEV-ES. Needs to return 'false'
* if the checks fail. Called from the #VC
* exception handler.
*/
struct x86_hyper_runtime {
void (*pin_vcpu)(int cpu);
void (*sev_es_hcall_prepare)(struct ghcb *ghcb, struct pt_regs *regs);
bool (*sev_es_hcall_finish)(struct ghcb *ghcb, struct pt_regs *regs);
};
/**
* struct x86_platform_ops - platform specific runtime functions
* @calibrate_cpu: calibrate CPU
* @calibrate_tsc: calibrate TSC, if different from CPU
* @get_wallclock: get time from HW clock like RTC etc.
* @set_wallclock: set time back to HW clock
* @is_untracked_pat_range exclude from PAT logic
* @nmi_init enable NMI on cpus
* @save_sched_clock_state: save state for sched_clock() on suspend
* @restore_sched_clock_state: restore state for sched_clock() on resume
* @apic_post_init: adjust apic if needed
* @legacy: legacy features
* @set_legacy_features: override legacy features. Use of this callback
* is highly discouraged. You should only need
* this if your hardware platform requires further
* custom fine tuning far beyond what may be
* possible in x86_early_init_platform_quirks() by
* only using the current x86_hardware_subarch
* semantics.
* @hyper: x86 hypervisor specific runtime callbacks
*/
struct x86_platform_ops {
unsigned long (*calibrate_cpu)(void);
unsigned long (*calibrate_tsc)(void);
void (*get_wallclock)(struct timespec64 *ts);
int (*set_wallclock)(const struct timespec64 *ts);
void (*iommu_shutdown)(void);
bool (*is_untracked_pat_range)(u64 start, u64 end);
void (*nmi_init)(void);
unsigned char (*get_nmi_reason)(void);
void (*save_sched_clock_state)(void);
void (*restore_sched_clock_state)(void);
void (*apic_post_init)(void);
struct x86_legacy_features legacy;
void (*set_legacy_features)(void);
struct x86_hyper_runtime hyper;
};
struct pci_dev;
struct x86_msi_ops {
void (*restore_msi_irqs)(struct pci_dev *dev);
};
struct x86_apic_ops {
unsigned int (*io_apic_read) (unsigned int apic, unsigned int reg);
void (*restore)(void);
};
extern struct x86_init_ops x86_init;
extern struct x86_cpuinit_ops x86_cpuinit;
extern struct x86_platform_ops x86_platform;
extern struct x86_msi_ops x86_msi;
extern struct x86_apic_ops x86_apic_ops;
extern void x86_early_init_platform_quirks(void);
extern void x86_init_noop(void);
extern void x86_init_uint_noop(unsigned int unused);
extern bool bool_x86_init_noop(void);
extern void x86_op_int_noop(int cpu);
extern bool x86_pnpbios_disabled(void);
#endif