mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-03 07:38:10 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/usb/host/xhci-pci.c
Basavaraj Natikar a5d6264b63 xhci: Enable RPM on controllers that support low-power states 
Use the low-power states of the underlying platform to enable runtime PM.
If the platform doesn't support runtime D3, then enabling default RPM will
result in the controller malfunctioning, as in the case of hotplug devices
not being detected because of a failed interrupt generation.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-16-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21 12:38:54 +02:00

1010 lines
30 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* xHCI host controller driver PCI Bus Glue.
*
* Copyright (C) 2008 Intel Corp.
*
* Author: Sarah Sharp
* Some code borrowed from the Linux EHCI driver.
*/
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/reset.h>
#include <linux/suspend.h>
#include "xhci.h"
#include "xhci-trace.h"
#include "xhci-pci.h"
#define SSIC_PORT_NUM 2
#define SSIC_PORT_CFG2 0x880c
#define SSIC_PORT_CFG2_OFFSET 0x30
#define PROG_DONE (1 << 30)
#define SSIC_PORT_UNUSED (1 << 31)
#define SPARSE_DISABLE_BIT 17
#define SPARSE_CNTL_ENABLE 0xC12C
/* Device for a quirk */
#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009
#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 0x1100
#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400
#define PCI_VENDOR_ID_ETRON 0x1b6f
#define PCI_DEVICE_ID_EJ168 0x7023
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31
#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI 0x9cb1
#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f
#define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8
#define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8
#define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8
#define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0
#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI 0x15b5
#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI 0x15b6
#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI 0x15c1
#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI 0x15db
#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI 0x15d4
#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI 0x15e9
#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI 0x15ec
#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI 0x15f0
#define PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI 0x8a13
#define PCI_DEVICE_ID_INTEL_CML_XHCI 0xa3af
#define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI 0x9a13
#define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI 0x51ed
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI 0x54ed
#define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639
#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9
#define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba
#define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb
#define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc
#define PCI_DEVICE_ID_ASMEDIA_1042_XHCI 0x1042
#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142
#define PCI_DEVICE_ID_ASMEDIA_1142_XHCI 0x1242
#define PCI_DEVICE_ID_ASMEDIA_2142_XHCI 0x2142
#define PCI_DEVICE_ID_ASMEDIA_3242_XHCI 0x3242
static const char hcd_name[] = "xhci_hcd";
static struct hc_driver __read_mostly xhci_pci_hc_driver;
static int xhci_pci_setup(struct usb_hcd *hcd);
static int xhci_pci_run(struct usb_hcd *hcd);
static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
struct usb_tt *tt, gfp_t mem_flags);
static const struct xhci_driver_overrides xhci_pci_overrides __initconst = {
.reset = xhci_pci_setup,
.start = xhci_pci_run,
.update_hub_device = xhci_pci_update_hub_device,
};
static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
{
struct usb_hcd *hcd = xhci_to_hcd(xhci);
if (hcd->msix_enabled) {
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int i;
for (i = 0; i < xhci->msix_count; i++)
synchronize_irq(pci_irq_vector(pdev, i));
}
}
/* Free any IRQs and disable MSI-X */
static void xhci_cleanup_msix(struct xhci_hcd *xhci)
{
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
/* return if using legacy interrupt */
if (hcd->irq > 0)
return;
if (hcd->msix_enabled) {
int i;
for (i = 0; i < xhci->msix_count; i++)
free_irq(pci_irq_vector(pdev, i), xhci_to_hcd(xhci));
} else {
free_irq(pci_irq_vector(pdev, 0), xhci_to_hcd(xhci));
}
pci_free_irq_vectors(pdev);
hcd->msix_enabled = 0;
}
/*
* Set up MSI
*/
static int xhci_setup_msi(struct xhci_hcd *xhci)
{
int ret;
/*
* TODO:Check with MSI Soc for sysdev
*/
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
if (ret < 0) {
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"failed to allocate MSI entry");
return ret;
}
ret = request_irq(pdev->irq, xhci_msi_irq,
0, "xhci_hcd", xhci_to_hcd(xhci));
if (ret) {
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"disable MSI interrupt");
pci_free_irq_vectors(pdev);
}
return ret;
}
/*
* Set up MSI-X
*/
static int xhci_setup_msix(struct xhci_hcd *xhci)
{
int i, ret;
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
/*
* calculate number of msi-x vectors supported.
* - HCS_MAX_INTRS: the max number of interrupts the host can handle,
* with max number of interrupters based on the xhci HCSPARAMS1.
* - num_online_cpus: maximum msi-x vectors per CPUs core.
* Add additional 1 vector to ensure always available interrupt.
*/
xhci->msix_count = min(num_online_cpus() + 1,
HCS_MAX_INTRS(xhci->hcs_params1));
ret = pci_alloc_irq_vectors(pdev, xhci->msix_count, xhci->msix_count,
PCI_IRQ_MSIX);
if (ret < 0) {
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Failed to enable MSI-X");
return ret;
}
for (i = 0; i < xhci->msix_count; i++) {
ret = request_irq(pci_irq_vector(pdev, i), xhci_msi_irq, 0,
"xhci_hcd", xhci_to_hcd(xhci));
if (ret)
goto disable_msix;
}
hcd->msix_enabled = 1;
return ret;
disable_msix:
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "disable MSI-X interrupt");
while (--i >= 0)
free_irq(pci_irq_vector(pdev, i), xhci_to_hcd(xhci));
pci_free_irq_vectors(pdev);
return ret;
}
static int xhci_try_enable_msi(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct pci_dev *pdev;
int ret;
pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
/*
* Some Fresco Logic host controllers advertise MSI, but fail to
* generate interrupts. Don't even try to enable MSI.
*/
if (xhci->quirks & XHCI_BROKEN_MSI)
goto legacy_irq;
/* unregister the legacy interrupt */
if (hcd->irq)
free_irq(hcd->irq, hcd);
hcd->irq = 0;
ret = xhci_setup_msix(xhci);
if (ret)
/* fall back to msi*/
ret = xhci_setup_msi(xhci);
if (!ret) {
hcd->msi_enabled = 1;
return 0;
}
if (!pdev->irq) {
xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
return -EINVAL;
}
legacy_irq:
if (!strlen(hcd->irq_descr))
snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
hcd->driver->description, hcd->self.busnum);
/* fall back to legacy interrupt*/
ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
hcd->irq_descr, hcd);
if (ret) {
xhci_err(xhci, "request interrupt %d failed\n",
pdev->irq);
return ret;
}
hcd->irq = pdev->irq;
return 0;
}
static int xhci_pci_run(struct usb_hcd *hcd)
{
int ret;
if (usb_hcd_is_primary_hcd(hcd)) {
ret = xhci_try_enable_msi(hcd);
if (ret)
return ret;
}
return xhci_run(hcd);
}
static void xhci_pci_stop(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
xhci_stop(hcd);
if (usb_hcd_is_primary_hcd(hcd))
xhci_cleanup_msix(xhci);
}
/* called after powerup, by probe or system-pm "wakeup" */
static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
{
/*
* TODO: Implement finding debug ports later.
* TODO: see if there are any quirks that need to be added to handle
* new extended capabilities.
*/
/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
if (!pci_set_mwi(pdev))
xhci_dbg(xhci, "MWI active\n");
xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
return 0;
}
static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct xhci_driver_data *driver_data;
const struct pci_device_id *id;
id = pci_match_id(to_pci_driver(pdev->dev.driver)->id_table, pdev);
if (id && id->driver_data) {
driver_data = (struct xhci_driver_data *)id->driver_data;
xhci->quirks |= driver_data->quirks;
}
/* Look for vendor-specific quirks */
if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
(pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
pdev->revision == 0x0) {
xhci->quirks |= XHCI_RESET_EP_QUIRK;
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"XHCI_RESET_EP_QUIRK for this evaluation HW is deprecated");
}
if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
pdev->revision == 0x4) {
xhci->quirks |= XHCI_SLOW_SUSPEND;
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"QUIRK: Fresco Logic xHC revision %u"
"must be suspended extra slowly",
pdev->revision);
}
if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK)
xhci->quirks |= XHCI_BROKEN_STREAMS;
/* Fresco Logic confirms: all revisions of this chip do not
* support MSI, even though some of them claim to in their PCI
* capabilities.
*/
xhci->quirks |= XHCI_BROKEN_MSI;
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"QUIRK: Fresco Logic revision %u "
"has broken MSI implementation",
pdev->revision);
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
}
if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009)
xhci->quirks |= XHCI_BROKEN_STREAMS;
if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100)
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
if (pdev->vendor == PCI_VENDOR_ID_NEC)
xhci->quirks |= XHCI_NEC_HOST;
if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
xhci->quirks |= XHCI_AMD_0x96_HOST;
/* AMD PLL quirk */
if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_quirk_pll_check())
xhci->quirks |= XHCI_AMD_PLL_FIX;
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
(pdev->device == 0x145c ||
pdev->device == 0x15e0 ||
pdev->device == 0x15e1 ||
pdev->device == 0x43bb))
xhci->quirks |= XHCI_SUSPEND_DELAY;
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
(pdev->device == 0x15e0 || pdev->device == 0x15e1))
xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND;
if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5) {
xhci->quirks |= XHCI_DISABLE_SPARSE;
xhci->quirks |= XHCI_RESET_ON_RESUME;
}
if (pdev->vendor == PCI_VENDOR_ID_AMD)
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
if ((pdev->vendor == PCI_VENDOR_ID_AMD) &&
((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) ||
(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) ||
(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) ||
(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1)))
xhci->quirks |= XHCI_U2_DISABLE_WAKE;
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI)
xhci->quirks |= XHCI_BROKEN_D3COLD_S2I;
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
xhci->quirks |= XHCI_LPM_SUPPORT;
xhci->quirks |= XHCI_INTEL_HOST;
xhci->quirks |= XHCI_AVOID_BEI;
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
xhci->limit_active_eps = 64;
xhci->quirks |= XHCI_SW_BW_CHECKING;
/*
* PPT desktop boards DH77EB and DH77DF will power back on after
* a few seconds of being shutdown. The fix for this is to
* switch the ports from xHCI to EHCI on shutdown. We can't use
* DMI information to find those particular boards (since each
* vendor will change the board name), so we have to key off all
* PPT chipsets.
*/
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI)) {
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_CML_XHCI)) {
xhci->quirks |= XHCI_PME_STUCK_QUIRK;
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)
xhci->quirks |= XHCI_SSIC_PORT_UNUSED;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI))
xhci->quirks |= XHCI_INTEL_USB_ROLE_SW;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI))
xhci->quirks |= XHCI_MISSING_CAS;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI))
xhci->quirks |= XHCI_RESET_TO_DEFAULT;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI))
xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
pdev->device == PCI_DEVICE_ID_EJ168) {
xhci->quirks |= XHCI_RESET_ON_RESUME;
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
xhci->quirks |= XHCI_BROKEN_STREAMS;
}
if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
pdev->device == 0x0014) {
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
xhci->quirks |= XHCI_ZERO_64B_REGS;
}
if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
pdev->device == 0x0015) {
xhci->quirks |= XHCI_RESET_ON_RESUME;
xhci->quirks |= XHCI_ZERO_64B_REGS;
}
if (pdev->vendor == PCI_VENDOR_ID_VIA)
xhci->quirks |= XHCI_RESET_ON_RESUME;
/* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
if (pdev->vendor == PCI_VENDOR_ID_VIA &&
pdev->device == 0x3432)
xhci->quirks |= XHCI_BROKEN_STREAMS;
if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483)
xhci->quirks |= XHCI_LPM_SUPPORT;
if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) {
/*
* try to tame the ASMedia 1042 controller which reports 0.96
* but appears to behave more like 1.0
*/
xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
xhci->quirks |= XHCI_BROKEN_STREAMS;
}
if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) {
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
}
if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
(pdev->device == PCI_DEVICE_ID_ASMEDIA_1142_XHCI ||
pdev->device == PCI_DEVICE_ID_ASMEDIA_2142_XHCI ||
pdev->device == PCI_DEVICE_ID_ASMEDIA_3242_XHCI))
xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)
xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL;
if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241)
xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM ||
pdev->vendor == PCI_VENDOR_ID_CAVIUM) &&
pdev->device == 0x9026)
xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT;
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2 ||
pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4))
xhci->quirks |= XHCI_NO_SOFT_RETRY;
if (pdev->vendor == PCI_VENDOR_ID_ZHAOXIN) {
xhci->quirks |= XHCI_ZHAOXIN_HOST;
xhci->quirks |= XHCI_LPM_SUPPORT;
if (pdev->device == 0x9202) {
xhci->quirks |= XHCI_RESET_ON_RESUME;
xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
}
if (pdev->device == 0x9203)
xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
}
/* xHC spec requires PCI devices to support D3hot and D3cold */
if (xhci->hci_version >= 0x120)
xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
else if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version >= 0x110)
xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
if (xhci->quirks & XHCI_RESET_ON_RESUME)
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"QUIRK: Resetting on resume");
}
#ifdef CONFIG_ACPI
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
{
static const guid_t intel_dsm_guid =
GUID_INIT(0xac340cb7, 0xe901, 0x45bf,
0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23);
union acpi_object *obj;
obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), &intel_dsm_guid, 3, 1,
NULL);
ACPI_FREE(obj);
}
static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct xhci_hub *rhub = &xhci->usb3_rhub;
int ret;
int i;
/* This is not the usb3 roothub we are looking for */
if (hcd != rhub->hcd)
return;
if (hdev->maxchild > rhub->num_ports) {
dev_err(&hdev->dev, "USB3 roothub port number mismatch\n");
return;
}
for (i = 0; i < hdev->maxchild; i++) {
ret = usb_acpi_port_lpm_incapable(hdev, i);
dev_dbg(&hdev->dev, "port-%d disable U1/U2 _DSM: %d\n", i + 1, ret);
if (ret >= 0) {
rhub->ports[i]->lpm_incapable = ret;
continue;
}
}
}
#else
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev) { }
#endif /* CONFIG_ACPI */
/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci;
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int retval;
xhci = hcd_to_xhci(hcd);
if (!xhci->sbrn)
pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
/* imod_interval is the interrupt moderation value in nanoseconds. */
xhci->imod_interval = 40000;
retval = xhci_gen_setup(hcd, xhci_pci_quirks);
if (retval)
return retval;
if (!usb_hcd_is_primary_hcd(hcd))
return 0;
if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
xhci_pme_acpi_rtd3_enable(pdev);
xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
/* Find any debug ports */
return xhci_pci_reinit(xhci, pdev);
}
static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
struct usb_tt *tt, gfp_t mem_flags)
{
/* Check if acpi claims some USB3 roothub ports are lpm incapable */
if (!hdev->parent)
xhci_find_lpm_incapable_ports(hcd, hdev);
return xhci_update_hub_device(hcd, hdev, tt, mem_flags);
}
/*
* We need to register our own PCI probe function (instead of the USB core's
* function) in order to create a second roothub under xHCI.
*/
static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
int retval;
struct xhci_hcd *xhci;
struct usb_hcd *hcd;
struct xhci_driver_data *driver_data;
struct reset_control *reset;
driver_data = (struct xhci_driver_data *)id->driver_data;
if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
retval = renesas_xhci_check_request_fw(dev, id);
if (retval)
return retval;
}
reset = devm_reset_control_get_optional_exclusive(&dev->dev, NULL);
if (IS_ERR(reset))
return PTR_ERR(reset);
reset_control_reset(reset);
/* Prevent runtime suspending between USB-2 and USB-3 initialization */
pm_runtime_get_noresume(&dev->dev);
/* Register the USB 2.0 roothub.
* FIXME: USB core must know to register the USB 2.0 roothub first.
* This is sort of silly, because we could just set the HCD driver flags
* to say USB 2.0, but I'm not sure what the implications would be in
* the other parts of the HCD code.
*/
retval = usb_hcd_pci_probe(dev, &xhci_pci_hc_driver);
if (retval)
goto put_runtime_pm;
/* USB 2.0 roothub is stored in the PCI device now. */
hcd = dev_get_drvdata(&dev->dev);
xhci = hcd_to_xhci(hcd);
xhci->reset = reset;
xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev,
pci_name(dev), hcd);
if (!xhci->shared_hcd) {
retval = -ENOMEM;
goto dealloc_usb2_hcd;
}
retval = xhci_ext_cap_init(xhci);
if (retval)
goto put_usb3_hcd;
retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
IRQF_SHARED);
if (retval)
goto put_usb3_hcd;
/* Roothub already marked as USB 3.0 speed */
if (!(xhci->quirks & XHCI_BROKEN_STREAMS) &&
HCC_MAX_PSA(xhci->hcc_params) >= 4)
xhci->shared_hcd->can_do_streams = 1;
/* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
pm_runtime_put_noidle(&dev->dev);
if (pci_choose_state(dev, PMSG_SUSPEND) == PCI_D0)
pm_runtime_forbid(&dev->dev);
else if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
pm_runtime_allow(&dev->dev);
dma_set_max_seg_size(&dev->dev, UINT_MAX);
return 0;
put_usb3_hcd:
usb_put_hcd(xhci->shared_hcd);
dealloc_usb2_hcd:
usb_hcd_pci_remove(dev);
put_runtime_pm:
pm_runtime_put_noidle(&dev->dev);
return retval;
}
static void xhci_pci_remove(struct pci_dev *dev)
{
struct xhci_hcd *xhci;
xhci = hcd_to_xhci(pci_get_drvdata(dev));
xhci->xhc_state |= XHCI_STATE_REMOVING;
if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
pm_runtime_forbid(&dev->dev);
if (xhci->shared_hcd) {
usb_remove_hcd(xhci->shared_hcd);
usb_put_hcd(xhci->shared_hcd);
xhci->shared_hcd = NULL;
}
/* Workaround for spurious wakeups at shutdown with HSW */
if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
pci_set_power_state(dev, PCI_D3hot);
usb_hcd_pci_remove(dev);
}
/*
* In some Intel xHCI controllers, in order to get D3 working,
* through a vendor specific SSIC CONFIG register at offset 0x883c,
* SSIC PORT need to be marked as "unused" before putting xHCI
* into D3. After D3 exit, the SSIC port need to be marked as "used".
* Without this change, xHCI might not enter D3 state.
*/
static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
u32 val;
void __iomem *reg;
int i;
for (i = 0; i < SSIC_PORT_NUM; i++) {
reg = (void __iomem *) xhci->cap_regs +
SSIC_PORT_CFG2 +
i * SSIC_PORT_CFG2_OFFSET;
/* Notify SSIC that SSIC profile programming is not done. */
val = readl(reg) & ~PROG_DONE;
writel(val, reg);
/* Mark SSIC port as unused(suspend) or used(resume) */
val = readl(reg);
if (suspend)
val |= SSIC_PORT_UNUSED;
else
val &= ~SSIC_PORT_UNUSED;
writel(val, reg);
/* Notify SSIC that SSIC profile programming is done */
val = readl(reg) | PROG_DONE;
writel(val, reg);
readl(reg);
}
}
/*
* Make sure PME works on some Intel xHCI controllers by writing 1 to clear
* the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
*/
static void xhci_pme_quirk(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
void __iomem *reg;
u32 val;
reg = (void __iomem *) xhci->cap_regs + 0x80a4;
val = readl(reg);
writel(val | BIT(28), reg);
readl(reg);
}
static void xhci_sparse_control_quirk(struct usb_hcd *hcd)
{
u32 reg;
reg = readl(hcd->regs + SPARSE_CNTL_ENABLE);
reg &= ~BIT(SPARSE_DISABLE_BIT);
writel(reg, hcd->regs + SPARSE_CNTL_ENABLE);
}
static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int ret;
/*
* Systems with the TI redriver that loses port status change events
* need to have the registers polled during D3, so avoid D3cold.
*/
if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
pci_d3cold_disable(pdev);
#ifdef CONFIG_SUSPEND
/* d3cold is broken, but only when s2idle is used */
if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE &&
xhci->quirks & (XHCI_BROKEN_D3COLD_S2I))
pci_d3cold_disable(pdev);
#endif
if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
xhci_pme_quirk(hcd);
if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
xhci_ssic_port_unused_quirk(hcd, true);
if (xhci->quirks & XHCI_DISABLE_SPARSE)
xhci_sparse_control_quirk(hcd);
ret = xhci_suspend(xhci, do_wakeup);
/* synchronize irq when using MSI-X */
xhci_msix_sync_irqs(xhci);
if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED))
xhci_ssic_port_unused_quirk(hcd, false);
return ret;
}
static int xhci_pci_resume(struct usb_hcd *hcd, pm_message_t msg)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int retval = 0;
reset_control_reset(xhci->reset);
/* The BIOS on systems with the Intel Panther Point chipset may or may
* not support xHCI natively. That means that during system resume, it
* may switch the ports back to EHCI so that users can use their
* keyboard to select a kernel from GRUB after resume from hibernate.
*
* The BIOS is supposed to remember whether the OS had xHCI ports
* enabled before resume, and switch the ports back to xHCI when the
* BIOS/OS semaphore is written, but we all know we can't trust BIOS
* writers.
*
* Unconditionally switch the ports back to xHCI after a system resume.
* It should not matter whether the EHCI or xHCI controller is
* resumed first. It's enough to do the switchover in xHCI because
* USB core won't notice anything as the hub driver doesn't start
* running again until after all the devices (including both EHCI and
* xHCI host controllers) have been resumed.
*/
if (pdev->vendor == PCI_VENDOR_ID_INTEL)
usb_enable_intel_xhci_ports(pdev);
if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
xhci_ssic_port_unused_quirk(hcd, false);
if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
xhci_pme_quirk(hcd);
retval = xhci_resume(xhci, msg);
return retval;
}
static int xhci_pci_poweroff_late(struct usb_hcd *hcd, bool do_wakeup)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct xhci_port *port;
struct usb_device *udev;
unsigned int slot_id;
u32 portsc;
int i;
/*
* Systems with XHCI_RESET_TO_DEFAULT quirk have boot firmware that
* cause significant boot delay if usb ports are in suspended U3 state
* during boot. Some USB devices survive in U3 state over S4 hibernate
*
* Disable ports that are in U3 if remote wake is not enabled for either
* host controller or connected device
*/
if (!(xhci->quirks & XHCI_RESET_TO_DEFAULT))
return 0;
for (i = 0; i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
port = &xhci->hw_ports[i];
portsc = readl(port->addr);
if ((portsc & PORT_PLS_MASK) != XDEV_U3)
continue;
slot_id = xhci_find_slot_id_by_port(port->rhub->hcd, xhci,
port->hcd_portnum + 1);
if (!slot_id || !xhci->devs[slot_id]) {
xhci_err(xhci, "No dev for slot_id %d for port %d-%d in U3\n",
slot_id, port->rhub->hcd->self.busnum, port->hcd_portnum + 1);
continue;
}
udev = xhci->devs[slot_id]->udev;
/* if wakeup is enabled then don't disable the port */
if (udev->do_remote_wakeup && do_wakeup)
continue;
xhci_dbg(xhci, "port %d-%d in U3 without wakeup, disable it\n",
port->rhub->hcd->self.busnum, port->hcd_portnum + 1);
portsc = xhci_port_state_to_neutral(portsc);
writel(portsc | PORT_PE, port->addr);
}
return 0;
}
static void xhci_pci_shutdown(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
xhci_shutdown(hcd);
xhci_cleanup_msix(xhci);
/* Yet another workaround for spurious wakeups at shutdown with HSW */
if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
pci_set_power_state(pdev, PCI_D3hot);
}
/*-------------------------------------------------------------------------*/
static const struct xhci_driver_data reneses_data = {
.quirks = XHCI_RENESAS_FW_QUIRK,
.firmware = "renesas_usb_fw.mem",
};
/* PCI driver selection metadata; PCI hotplugging uses this */
static const struct pci_device_id pci_ids[] = {
{ PCI_DEVICE(0x1912, 0x0014),
.driver_data = (unsigned long)&reneses_data,
},
{ PCI_DEVICE(0x1912, 0x0015),
.driver_data = (unsigned long)&reneses_data,
},
/* handle any USB 3.0 xHCI controller */
{ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
},
{ /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(pci, pci_ids);
/*
* Without CONFIG_USB_XHCI_PCI_RENESAS renesas_xhci_check_request_fw() won't
* load firmware, so don't encumber the xhci-pci driver with it.
*/
#if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS)
MODULE_FIRMWARE("renesas_usb_fw.mem");
#endif
/* pci driver glue; this is a "new style" PCI driver module */
static struct pci_driver xhci_pci_driver = {
.name = hcd_name,
.id_table = pci_ids,
.probe = xhci_pci_probe,
.remove = xhci_pci_remove,
/* suspend and resume implemented later */
.shutdown = usb_hcd_pci_shutdown,
.driver = {
.pm = pm_ptr(&usb_hcd_pci_pm_ops),
},
};
static int __init xhci_pci_init(void)
{
xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides);
xhci_pci_hc_driver.pci_suspend = pm_ptr(xhci_pci_suspend);
xhci_pci_hc_driver.pci_resume = pm_ptr(xhci_pci_resume);
xhci_pci_hc_driver.pci_poweroff_late = pm_ptr(xhci_pci_poweroff_late);
xhci_pci_hc_driver.shutdown = pm_ptr(xhci_pci_shutdown);
xhci_pci_hc_driver.stop = xhci_pci_stop;
return pci_register_driver(&xhci_pci_driver);
}
module_init(xhci_pci_init);
static void __exit xhci_pci_exit(void)
{
pci_unregister_driver(&xhci_pci_driver);
}
module_exit(xhci_pci_exit);
MODULE_DESCRIPTION("xHCI PCI Host Controller Driver");
MODULE_LICENSE("GPL");
Reference in a new issue View git blame Copy permalink