linux-stable/include/dt-bindings/reset/bt1-ccu.h
Serge Semin 11ea09b9e2 dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
After being gained by the CCU PLLs the signals must be transformed to
be suitable for the clock-consumers. This is done by a set of dividers
embedded into the CCU. A first block of dividers is used to create
reference clocks for AXI-bus of high-speed peripheral IP-cores of the
chip. The second block dividers alter the PLLs output signals to be then
consumed by SoC peripheral devices. Both block DT nodes are ordinary
clock-providers with standard set of properties supported. But in addition
to that each clock provider can be used to reset the corresponding clock
domain. This makes the AXI-bus and System Devices CCU DT nodes to be also
reset-providers.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Link: https://lore.kernel.org/r/20200526222056.18072-3-Sergey.Semin@baikalelectronics.ru
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-30 11:04:35 -07:00

25 lines
629 B
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
*
* Baikal-T1 CCU reset indices
*/
#ifndef __DT_BINDINGS_RESET_BT1_CCU_H
#define __DT_BINDINGS_RESET_BT1_CCU_H
#define CCU_AXI_MAIN_RST 0
#define CCU_AXI_DDR_RST 1
#define CCU_AXI_SATA_RST 2
#define CCU_AXI_GMAC0_RST 3
#define CCU_AXI_GMAC1_RST 4
#define CCU_AXI_XGMAC_RST 5
#define CCU_AXI_PCIE_M_RST 6
#define CCU_AXI_PCIE_S_RST 7
#define CCU_AXI_USB_RST 8
#define CCU_AXI_HWA_RST 9
#define CCU_AXI_SRAM_RST 10
#define CCU_SYS_SATA_REF_RST 0
#define CCU_SYS_APB_RST 1
#endif /* __DT_BINDINGS_RESET_BT1_CCU_H */