linux-stable/drivers/video/backlight/lms283gf05.c
Linus Walleij 93cc26fa8f backlight: lms283gf05: Convert to GPIO descriptors
This converts the lms283gf05 backlight driver to use GPIO
descriptors and switches the single PXA Palm Z2 device
over to defining these.

Since the platform data was only used to convey GPIO
information we can delete the platform data header.

Notice that we define the proper active low semantics in
the board file GPIO descriptor table (active low) and
assert the reset line by bringing it to "1" (asserted).

Cc: Marek Vasut <marex@denx.de>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Mack <daniel@zonque.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-01-20 12:47:11 +00:00

191 lines
3.9 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* lms283gf05.c -- support for Samsung LMS283GF05 LCD
*
* Copyright (c) 2009 Marek Vasut <marek.vasut@gmail.com>
*/
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/gpio/consumer.h>
#include <linux/lcd.h>
#include <linux/spi/spi.h>
#include <linux/module.h>
struct lms283gf05_state {
struct spi_device *spi;
struct lcd_device *ld;
struct gpio_desc *reset;
};
struct lms283gf05_seq {
unsigned char reg;
unsigned short value;
unsigned char delay;
};
/* Magic sequences supplied by manufacturer, for details refer to datasheet */
static const struct lms283gf05_seq disp_initseq[] = {
/* REG, VALUE, DELAY */
{ 0x07, 0x0000, 0 },
{ 0x13, 0x0000, 10 },
{ 0x11, 0x3004, 0 },
{ 0x14, 0x200F, 0 },
{ 0x10, 0x1a20, 0 },
{ 0x13, 0x0040, 50 },
{ 0x13, 0x0060, 0 },
{ 0x13, 0x0070, 200 },
{ 0x01, 0x0127, 0 },
{ 0x02, 0x0700, 0 },
{ 0x03, 0x1030, 0 },
{ 0x08, 0x0208, 0 },
{ 0x0B, 0x0620, 0 },
{ 0x0C, 0x0110, 0 },
{ 0x30, 0x0120, 0 },
{ 0x31, 0x0127, 0 },
{ 0x32, 0x0000, 0 },
{ 0x33, 0x0503, 0 },
{ 0x34, 0x0727, 0 },
{ 0x35, 0x0124, 0 },
{ 0x36, 0x0706, 0 },
{ 0x37, 0x0701, 0 },
{ 0x38, 0x0F00, 0 },
{ 0x39, 0x0F00, 0 },
{ 0x40, 0x0000, 0 },
{ 0x41, 0x0000, 0 },
{ 0x42, 0x013f, 0 },
{ 0x43, 0x0000, 0 },
{ 0x44, 0x013f, 0 },
{ 0x45, 0x0000, 0 },
{ 0x46, 0xef00, 0 },
{ 0x47, 0x013f, 0 },
{ 0x48, 0x0000, 0 },
{ 0x07, 0x0015, 30 },
{ 0x07, 0x0017, 0 },
{ 0x20, 0x0000, 0 },
{ 0x21, 0x0000, 0 },
{ 0x22, 0x0000, 0 }
};
static const struct lms283gf05_seq disp_pdwnseq[] = {
{ 0x07, 0x0016, 30 },
{ 0x07, 0x0004, 0 },
{ 0x10, 0x0220, 20 },
{ 0x13, 0x0060, 50 },
{ 0x13, 0x0040, 50 },
{ 0x13, 0x0000, 0 },
{ 0x10, 0x0000, 0 }
};
static void lms283gf05_reset(struct gpio_desc *gpiod)
{
gpiod_set_value(gpiod, 0); /* De-asserted */
mdelay(100);
gpiod_set_value(gpiod, 1); /* Asserted */
mdelay(20);
gpiod_set_value(gpiod, 0); /* De-asserted */
mdelay(20);
}
static void lms283gf05_toggle(struct spi_device *spi,
const struct lms283gf05_seq *seq, int sz)
{
char buf[3];
int i;
for (i = 0; i < sz; i++) {
buf[0] = 0x74;
buf[1] = 0x00;
buf[2] = seq[i].reg;
spi_write(spi, buf, 3);
buf[0] = 0x76;
buf[1] = seq[i].value >> 8;
buf[2] = seq[i].value & 0xff;
spi_write(spi, buf, 3);
mdelay(seq[i].delay);
}
}
static int lms283gf05_power_set(struct lcd_device *ld, int power)
{
struct lms283gf05_state *st = lcd_get_data(ld);
struct spi_device *spi = st->spi;
if (power <= FB_BLANK_NORMAL) {
if (st->reset)
lms283gf05_reset(st->reset);
lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
} else {
lms283gf05_toggle(spi, disp_pdwnseq, ARRAY_SIZE(disp_pdwnseq));
if (st->reset)
gpiod_set_value(st->reset, 1); /* Asserted */
}
return 0;
}
static struct lcd_ops lms_ops = {
.set_power = lms283gf05_power_set,
.get_power = NULL,
};
static int lms283gf05_probe(struct spi_device *spi)
{
struct lms283gf05_state *st;
struct lcd_device *ld;
st = devm_kzalloc(&spi->dev, sizeof(struct lms283gf05_state),
GFP_KERNEL);
if (st == NULL)
return -ENOMEM;
st->reset = gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(st->reset))
return PTR_ERR(st->reset);
gpiod_set_consumer_name(st->reset, "LMS283GF05 RESET");
ld = devm_lcd_device_register(&spi->dev, "lms283gf05", &spi->dev, st,
&lms_ops);
if (IS_ERR(ld))
return PTR_ERR(ld);
st->spi = spi;
st->ld = ld;
spi_set_drvdata(spi, st);
/* kick in the LCD */
if (st->reset)
lms283gf05_reset(st->reset);
lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
return 0;
}
static struct spi_driver lms283gf05_driver = {
.driver = {
.name = "lms283gf05",
},
.probe = lms283gf05_probe,
};
module_spi_driver(lms283gf05_driver);
MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
MODULE_DESCRIPTION("LCD283GF05 LCD");
MODULE_LICENSE("GPL v2");