mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-28 07:13:34 +00:00
Code Issues Releases Wiki Activity
linux-stable/lib/Makefile
Prasad Sodagudi d593d64f04 lib: Add register read/write tracing support 
Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors
are typically used to read/write from/to memory mapped registers
and can cause hangs or some undefined behaviour in following few
cases,

* If the access to the register space is unclocked, for example: if
  there is an access to multimedia(MM) block registers without MM
  clocks.

* If the register space is protected and not set to be accessible from
  non-secure world, for example: only EL3 (EL: Exception level) access
  is allowed and any EL2/EL1 access is forbidden.

* If xPU(memory/register protection units) is controlling access to
  certain memory/register space for specific clients.

and more...

Such cases usually results in instant reboot/SErrors/NOC or interconnect
hangs and tracing these register accesses can be very helpful to debug
such issues during initial development stages and also in later stages.

So use ftrace trace events to log such MMIO register accesses which
provides rich feature set such as early enablement of trace events,
filtering capability, dumping ftrace logs on console and many more.

Sample output:

rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700
rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700
rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610
rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610

Co-developed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-15 17:41:12 +02:00

416 lines
14 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0
#
# Makefile for some libs needed in the kernel.
#
ccflags-remove-$(CONFIG_FUNCTION_TRACER) += $(CC_FLAGS_FTRACE)
# These files are disabled because they produce lots of non-interesting and/or
# flaky coverage that is not a function of syscall inputs. For example,
# rbtree can be global and individual rotations don't correlate with inputs.
KCOV_INSTRUMENT_string.o := n
KCOV_INSTRUMENT_rbtree.o := n
KCOV_INSTRUMENT_list_debug.o := n
KCOV_INSTRUMENT_debugobjects.o := n
KCOV_INSTRUMENT_dynamic_debug.o := n
KCOV_INSTRUMENT_fault-inject.o := n
# string.o implements standard library functions like memset/memcpy etc.
# Use -ffreestanding to ensure that the compiler does not try to "optimize"
# them into calls to themselves.
CFLAGS_string.o := -ffreestanding
# Early boot use of cmdline, don't instrument it
ifdef CONFIG_AMD_MEM_ENCRYPT
KASAN_SANITIZE_string.o := n
CFLAGS_string.o += -fno-stack-protector
endif
lib-y := ctype.o string.o vsprintf.o cmdline.o \
rbtree.o radix-tree.o timerqueue.o xarray.o \
idr.o extable.o sha1.o irq_regs.o argv_split.o \
flex_proportions.o ratelimit.o show_mem.o \
is_single_threaded.o plist.o decompress.o kobject_uevent.o \
earlycpio.o seq_buf.o siphash.o dec_and_lock.o \
nmi_backtrace.o nodemask.o win_minmax.o memcat_p.o \
buildid.o
lib-$(CONFIG_PRINTK) += dump_stack.o
lib-$(CONFIG_SMP) += cpumask.o
lib-y += kobject.o klist.o
obj-y += lockref.o
obj-y += bcd.o sort.o parser.o debug_locks.o random32.o \
bust_spinlocks.o kasprintf.o bitmap.o scatterlist.o \
list_sort.o uuid.o iov_iter.o clz_ctz.o \
bsearch.o find_bit.o llist.o memweight.o kfifo.o \
percpu-refcount.o rhashtable.o \
once.o refcount.o usercopy.o errseq.o bucket_locks.o \
generic-radix-tree.o
obj-$(CONFIG_STRING_SELFTEST) += test_string.o
obj-y += string_helpers.o
obj-$(CONFIG_TEST_STRING_HELPERS) += test-string_helpers.o
obj-y += hexdump.o
obj-$(CONFIG_TEST_HEXDUMP) += test_hexdump.o
obj-y += kstrtox.o
obj-$(CONFIG_FIND_BIT_BENCHMARK) += find_bit_benchmark.o
obj-$(CONFIG_TEST_BPF) += test_bpf.o
obj-$(CONFIG_TEST_FIRMWARE) += test_firmware.o
obj-$(CONFIG_TEST_BITOPS) += test_bitops.o
CFLAGS_test_bitops.o += -Werror
obj-$(CONFIG_TEST_SYSCTL) += test_sysctl.o
obj-$(CONFIG_TEST_SIPHASH) += test_siphash.o
obj-$(CONFIG_HASH_KUNIT_TEST) += test_hash.o
obj-$(CONFIG_TEST_IDA) += test_ida.o
obj-$(CONFIG_KASAN_KUNIT_TEST) += test_kasan.o
CFLAGS_test_kasan.o += -fno-builtin
CFLAGS_test_kasan.o += $(call cc-disable-warning, vla)
obj-$(CONFIG_KASAN_MODULE_TEST) += test_kasan_module.o
CFLAGS_test_kasan_module.o += -fno-builtin
obj-$(CONFIG_TEST_UBSAN) += test_ubsan.o
CFLAGS_test_ubsan.o += $(call cc-disable-warning, vla)
UBSAN_SANITIZE_test_ubsan.o := y
obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
obj-$(CONFIG_TEST_LIST_SORT) += test_list_sort.o
obj-$(CONFIG_TEST_MIN_HEAP) += test_min_heap.o
obj-$(CONFIG_TEST_LKM) += test_module.o
obj-$(CONFIG_TEST_VMALLOC) += test_vmalloc.o
obj-$(CONFIG_TEST_RHASHTABLE) += test_rhashtable.o
obj-$(CONFIG_TEST_SORT) += test_sort.o
obj-$(CONFIG_TEST_USER_COPY) += test_user_copy.o
obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o
obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o
obj-$(CONFIG_TEST_PRINTF) += test_printf.o
obj-$(CONFIG_TEST_SCANF) += test_scanf.o
obj-$(CONFIG_TEST_BITMAP) += test_bitmap.o
obj-$(CONFIG_TEST_STRSCPY) += test_strscpy.o
obj-$(CONFIG_TEST_UUID) += test_uuid.o
obj-$(CONFIG_TEST_XARRAY) += test_xarray.o
obj-$(CONFIG_TEST_PARMAN) += test_parman.o
obj-$(CONFIG_TEST_KMOD) += test_kmod.o
obj-$(CONFIG_TEST_DEBUG_VIRTUAL) += test_debug_virtual.o
obj-$(CONFIG_TEST_MEMCAT_P) += test_memcat_p.o
obj-$(CONFIG_TEST_OBJAGG) += test_objagg.o
obj-$(CONFIG_TEST_BLACKHOLE_DEV) += test_blackhole_dev.o
obj-$(CONFIG_TEST_MEMINIT) += test_meminit.o
obj-$(CONFIG_TEST_LOCKUP) += test_lockup.o
obj-$(CONFIG_TEST_HMM) += test_hmm.o
obj-$(CONFIG_TEST_FREE_PAGES) += test_free_pages.o
obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o
obj-$(CONFIG_TEST_REF_TRACKER) += test_ref_tracker.o
CFLAGS_test_fprobe.o += $(CC_FLAGS_FTRACE)
obj-$(CONFIG_FPROBE_SANITY_TEST) += test_fprobe.o
#
# CFLAGS for compiling floating point code inside the kernel. x86/Makefile turns
# off the generation of FPU/SSE* instructions for kernel proper but FPU_FLAGS
# get appended last to CFLAGS and thus override those previous compiler options.
#
FPU_CFLAGS := -msse -msse2
ifdef CONFIG_CC_IS_GCC
# Stack alignment mismatch, proceed with caution.
# GCC < 7.1 cannot compile code using `double` and -mpreferred-stack-boundary=3
# (8B stack alignment).
# See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53383
#
# The "-msse" in the first argument is there so that the
# -mpreferred-stack-boundary=3 build error:
#
# -mpreferred-stack-boundary=3 is not between 4 and 12
#
# can be triggered. Otherwise gcc doesn't complain.
FPU_CFLAGS += -mhard-float
FPU_CFLAGS += $(call cc-option,-msse -mpreferred-stack-boundary=3,-mpreferred-stack-boundary=4)
endif
obj-$(CONFIG_TEST_FPU) += test_fpu.o
CFLAGS_test_fpu.o += $(FPU_CFLAGS)
obj-$(CONFIG_TEST_LIVEPATCH) += livepatch/
obj-$(CONFIG_KUNIT) += kunit/
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
CFLAGS_kobject_uevent.o += -DDEBUG
endif
obj-$(CONFIG_DEBUG_INFO_REDUCED) += debug_info.o
CFLAGS_debug_info.o += $(call cc-option, -femit-struct-debug-detailed=any)
obj-y += math/ crypto/
obj-$(CONFIG_GENERIC_IOMAP) += iomap.o
obj-$(CONFIG_GENERIC_PCI_IOMAP) += pci_iomap.o
obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o
obj-$(CONFIG_CHECK_SIGNATURE) += check_signature.o
obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o
lib-y += logic_pio.o
lib-$(CONFIG_INDIRECT_IOMEM) += logic_iomem.o
obj-$(CONFIG_TRACE_MMIO_ACCESS) += trace_readwrite.o
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
obj-$(CONFIG_BTREE) += btree.o
obj-$(CONFIG_INTERVAL_TREE) += interval_tree.o
obj-$(CONFIG_ASSOCIATIVE_ARRAY) += assoc_array.o
obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o
obj-$(CONFIG_DEBUG_LIST) += list_debug.o
obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o
obj-$(CONFIG_BITREVERSE) += bitrev.o
obj-$(CONFIG_LINEAR_RANGES) += linear_ranges.o
obj-$(CONFIG_PACKING) += packing.o
obj-$(CONFIG_CRC_CCITT) += crc-ccitt.o
obj-$(CONFIG_CRC16) += crc16.o
obj-$(CONFIG_CRC_T10DIF)+= crc-t10dif.o
obj-$(CONFIG_CRC_ITU_T) += crc-itu-t.o
obj-$(CONFIG_CRC32) += crc32.o
obj-$(CONFIG_CRC64) += crc64.o
obj-$(CONFIG_CRC32_SELFTEST) += crc32test.o
obj-$(CONFIG_CRC4) += crc4.o
obj-$(CONFIG_CRC7) += crc7.o
obj-$(CONFIG_LIBCRC32C) += libcrc32c.o
obj-$(CONFIG_CRC8) += crc8.o
obj-$(CONFIG_CRC64_ROCKSOFT) += crc64-rocksoft.o
obj-$(CONFIG_XXHASH) += xxhash.o
obj-$(CONFIG_GENERIC_ALLOCATOR) += genalloc.o
obj-$(CONFIG_842_COMPRESS) += 842/
obj-$(CONFIG_842_DECOMPRESS) += 842/
obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/
obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
obj-$(CONFIG_ZLIB_DFLTCC) += zlib_dfltcc/
obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
obj-$(CONFIG_BCH) += bch.o
obj-$(CONFIG_LZO_COMPRESS) += lzo/
obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
obj-$(CONFIG_LZ4_COMPRESS) += lz4/
obj-$(CONFIG_LZ4HC_COMPRESS) += lz4/
obj-$(CONFIG_LZ4_DECOMPRESS) += lz4/
obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/
obj-$(CONFIG_XZ_DEC) += xz/
obj-$(CONFIG_RAID6_PQ) += raid6/
lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o
lib-$(CONFIG_DECOMPRESS_XZ) += decompress_unxz.o
lib-$(CONFIG_DECOMPRESS_LZO) += decompress_unlzo.o
lib-$(CONFIG_DECOMPRESS_LZ4) += decompress_unlz4.o
lib-$(CONFIG_DECOMPRESS_ZSTD) += decompress_unzstd.o
obj-$(CONFIG_TEXTSEARCH) += textsearch.o
obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
obj-$(CONFIG_TEXTSEARCH_BM) += ts_bm.o
obj-$(CONFIG_TEXTSEARCH_FSM) += ts_fsm.o
obj-$(CONFIG_SMP) += percpu_counter.o
obj-$(CONFIG_AUDIT_GENERIC) += audit.o
obj-$(CONFIG_AUDIT_COMPAT_GENERIC) += compat_audit.o
obj-$(CONFIG_IOMMU_HELPER) += iommu-helper.o
obj-$(CONFIG_FAULT_INJECTION) += fault-inject.o
obj-$(CONFIG_FAULT_INJECTION_USERCOPY) += fault-inject-usercopy.o
obj-$(CONFIG_NOTIFIER_ERROR_INJECTION) += notifier-error-inject.o
obj-$(CONFIG_PM_NOTIFIER_ERROR_INJECT) += pm-notifier-error-inject.o
obj-$(CONFIG_NETDEV_NOTIFIER_ERROR_INJECT) += netdev-notifier-error-inject.o
obj-$(CONFIG_MEMORY_NOTIFIER_ERROR_INJECT) += memory-notifier-error-inject.o
obj-$(CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT) += \
of-reconfig-notifier-error-inject.o
obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
lib-$(CONFIG_GENERIC_BUG) += bug.o
obj-$(CONFIG_HAVE_ARCH_TRACEHOOK) += syscall.o
obj-$(CONFIG_DYNAMIC_DEBUG_CORE) += dynamic_debug.o
obj-$(CONFIG_SYMBOLIC_ERRNAME) += errname.o
obj-$(CONFIG_NLATTR) += nlattr.o
obj-$(CONFIG_LRU_CACHE) += lru_cache.o
obj-$(CONFIG_GENERIC_CSUM) += checksum.o
obj-$(CONFIG_GENERIC_ATOMIC64) += atomic64.o
obj-$(CONFIG_ATOMIC64_SELFTEST) += atomic64_test.o
obj-$(CONFIG_CPU_RMAP) += cpu_rmap.o
obj-$(CONFIG_DQL) += dynamic_queue_limits.o
obj-$(CONFIG_GLOB) += glob.o
obj-$(CONFIG_GLOB_SELFTEST) += globtest.o
obj-$(CONFIG_MPILIB) += mpi/
obj-$(CONFIG_DIMLIB) += dim/
obj-$(CONFIG_SIGNATURE) += digsig.o
lib-$(CONFIG_CLZ_TAB) += clz_tab.o
obj-$(CONFIG_GENERIC_STRNCPY_FROM_USER) += strncpy_from_user.o
obj-$(CONFIG_GENERIC_STRNLEN_USER) += strnlen_user.o
obj-$(CONFIG_GENERIC_NET_UTILS) += net_utils.o
obj-$(CONFIG_SG_SPLIT) += sg_split.o
obj-$(CONFIG_SG_POOL) += sg_pool.o
obj-$(CONFIG_MEMREGION) += memregion.o
obj-$(CONFIG_STMP_DEVICE) += stmp_device.o
obj-$(CONFIG_IRQ_POLL) += irq_poll.o
obj-$(CONFIG_POLYNOMIAL) += polynomial.o
# stackdepot.c should not be instrumented or call instrumented functions.
# Prevent the compiler from calling builtins like memcmp() or bcmp() from this
# file.
CFLAGS_stackdepot.o += -fno-builtin
obj-$(CONFIG_STACKDEPOT) += stackdepot.o
KASAN_SANITIZE_stackdepot.o := n
KCOV_INSTRUMENT_stackdepot.o := n
obj-$(CONFIG_REF_TRACKER) += ref_tracker.o
libfdt_files = fdt.o fdt_ro.o fdt_wip.o fdt_rw.o fdt_sw.o fdt_strerror.o \
fdt_empty_tree.o fdt_addresses.o
$(foreach file, $(libfdt_files), \
$(eval CFLAGS_$(file) = -I $(srctree)/scripts/dtc/libfdt))
lib-$(CONFIG_LIBFDT) += $(libfdt_files)
obj-$(CONFIG_BOOT_CONFIG) += bootconfig.o
obj-$(CONFIG_BOOT_CONFIG_EMBED) += bootconfig-data.o
$(obj)/bootconfig-data.o: $(obj)/default.bconf
targets += default.bconf
filechk_defbconf = cat $(or $(real-prereqs), /dev/null)
$(obj)/default.bconf: $(CONFIG_BOOT_CONFIG_EMBED_FILE) FORCE
$(call filechk,defbconf)
obj-$(CONFIG_RBTREE_TEST) += rbtree_test.o
obj-$(CONFIG_INTERVAL_TREE_TEST) += interval_tree_test.o
obj-$(CONFIG_PERCPU_TEST) += percpu_test.o
obj-$(CONFIG_ASN1) += asn1_decoder.o
obj-$(CONFIG_ASN1_ENCODER) += asn1_encoder.o
obj-$(CONFIG_FONT_SUPPORT) += fonts/
hostprogs := gen_crc32table
hostprogs += gen_crc64table
clean-files := crc32table.h
clean-files += crc64table.h
$(obj)/crc32.o: $(obj)/crc32table.h
quiet_cmd_crc32 = GEN $@
cmd_crc32 = $< > $@
$(obj)/crc32table.h: $(obj)/gen_crc32table
$(call cmd,crc32)
$(obj)/crc64.o: $(obj)/crc64table.h
quiet_cmd_crc64 = GEN $@
cmd_crc64 = $< > $@
$(obj)/crc64table.h: $(obj)/gen_crc64table
$(call cmd,crc64)
#
# Build a fast OID lookip registry from include/linux/oid_registry.h
#
obj-$(CONFIG_OID_REGISTRY) += oid_registry.o
$(obj)/oid_registry.o: $(obj)/oid_registry_data.c
$(obj)/oid_registry_data.c: $(srctree)/include/linux/oid_registry.h \
$(src)/build_OID_registry
$(call cmd,build_OID_registry)
quiet_cmd_build_OID_registry = GEN $@
cmd_build_OID_registry = perl $(srctree)/$(src)/build_OID_registry $< $@
clean-files += oid_registry_data.c
obj-$(CONFIG_UCS2_STRING) += ucs2_string.o
ifneq ($(CONFIG_UBSAN_TRAP),y)
obj-$(CONFIG_UBSAN) += ubsan.o
endif
UBSAN_SANITIZE_ubsan.o := n
KASAN_SANITIZE_ubsan.o := n
KCSAN_SANITIZE_ubsan.o := n
CFLAGS_ubsan.o := -fno-stack-protector $(DISABLE_STACKLEAK_PLUGIN)
obj-$(CONFIG_SBITMAP) += sbitmap.o
obj-$(CONFIG_PARMAN) += parman.o
# GCC library routines
obj-$(CONFIG_GENERIC_LIB_ASHLDI3) += ashldi3.o
obj-$(CONFIG_GENERIC_LIB_ASHRDI3) += ashrdi3.o
obj-$(CONFIG_GENERIC_LIB_LSHRDI3) += lshrdi3.o
obj-$(CONFIG_GENERIC_LIB_MULDI3) += muldi3.o
obj-$(CONFIG_GENERIC_LIB_CMPDI2) += cmpdi2.o
obj-$(CONFIG_GENERIC_LIB_UCMPDI2) += ucmpdi2.o
obj-$(CONFIG_OBJAGG) += objagg.o
# pldmfw library
obj-$(CONFIG_PLDMFW) += pldmfw/
# KUnit tests
CFLAGS_bitfield_kunit.o := $(DISABLE_STRUCTLEAK_PLUGIN)
obj-$(CONFIG_BITFIELD_KUNIT) += bitfield_kunit.o
obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o
obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o
obj-$(CONFIG_BITS_TEST) += test_bits.o
obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o
obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o
obj-$(CONFIG_MEMCPY_KUNIT_TEST) += memcpy_kunit.o
obj-$(CONFIG_OVERFLOW_KUNIT_TEST) += overflow_kunit.o
CFLAGS_stackinit_kunit.o += $(call cc-disable-warning, switch-unreachable)
obj-$(CONFIG_STACKINIT_KUNIT_TEST) += stackinit_kunit.o
obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o
# FORTIFY_SOURCE compile-time behavior tests
TEST_FORTIFY_SRCS = $(wildcard $(srctree)/$(src)/test_fortify/*-*.c)
TEST_FORTIFY_LOGS = $(patsubst $(srctree)/$(src)/%.c, %.log, $(TEST_FORTIFY_SRCS))
TEST_FORTIFY_LOG = test_fortify.log
quiet_cmd_test_fortify = TEST $@
cmd_test_fortify = $(CONFIG_SHELL) $(srctree)/scripts/test_fortify.sh \
$< $@ "$(NM)" $(CC) $(c_flags) \
$(call cc-disable-warning,fortify-source) \
-DKBUILD_EXTRA_WARN1
targets += $(TEST_FORTIFY_LOGS)
clean-files += $(TEST_FORTIFY_LOGS)
clean-files += $(addsuffix .o, $(TEST_FORTIFY_LOGS))
$(obj)/test_fortify/%.log: $(src)/test_fortify/%.c \
$(src)/test_fortify/test_fortify.h \
$(srctree)/include/linux/fortify-string.h \
$(srctree)/scripts/test_fortify.sh \
FORCE
$(call if_changed,test_fortify)
quiet_cmd_gen_fortify_log = GEN $@
cmd_gen_fortify_log = cat </dev/null $(filter-out FORCE,$^) 2>/dev/null > $@ || true
targets += $(TEST_FORTIFY_LOG)
clean-files += $(TEST_FORTIFY_LOG)
$(obj)/$(TEST_FORTIFY_LOG): $(addprefix $(obj)/, $(TEST_FORTIFY_LOGS)) FORCE
$(call if_changed,gen_fortify_log)
# Fake dependency to trigger the fortify tests.
ifeq ($(CONFIG_FORTIFY_SOURCE),y)
$(obj)/string.o: $(obj)/$(TEST_FORTIFY_LOG)
endif
Reference in a new issue View git blame Copy permalink