linux-stable/drivers/mmc/host/dw_mmc-exynos.h
Seungwon Jeon 801131321a mmc: dw_mmc: exynos: Support eMMC's HS400 mode
Implements HS400 mode support for exynos host driver.
This also include some updates as new mode is added.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
[Alim: addressed review comments]
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-03-23 14:13:28 +01:00

73 lines
2.5 KiB
C

/*
* Exynos Specific Extensions for Synopsys DW Multimedia Card Interface driver
*
* Copyright (C) 2012-2014 Samsung Electronics Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _DW_MMC_EXYNOS_H_
#define _DW_MMC_EXYNOS_H_
#define SDMMC_CLKSEL 0x09C
#define SDMMC_CLKSEL64 0x0A8
/* Extended Register's Offset */
#define SDMMC_HS400_DQS_EN 0x180
#define SDMMC_HS400_ASYNC_FIFO_CTRL 0x184
#define SDMMC_HS400_DLINE_CTRL 0x188
/* CLKSEL register defines */
#define SDMMC_CLKSEL_CCLK_SAMPLE(x) (((x) & 7) << 0)
#define SDMMC_CLKSEL_CCLK_DRIVE(x) (((x) & 7) << 16)
#define SDMMC_CLKSEL_CCLK_DIVIDER(x) (((x) & 7) << 24)
#define SDMMC_CLKSEL_GET_DRV_WD3(x) (((x) >> 16) & 0x7)
#define SDMMC_CLKSEL_GET_DIV(x) (((x) >> 24) & 0x7)
#define SDMMC_CLKSEL_UP_SAMPLE(x, y) (((x) & ~SDMMC_CLKSEL_CCLK_SAMPLE(7)) |\
SDMMC_CLKSEL_CCLK_SAMPLE(y))
#define SDMMC_CLKSEL_TIMING(x, y, z) (SDMMC_CLKSEL_CCLK_SAMPLE(x) | \
SDMMC_CLKSEL_CCLK_DRIVE(y) | \
SDMMC_CLKSEL_CCLK_DIVIDER(z))
#define SDMMC_CLKSEL_TIMING_MASK SDMMC_CLKSEL_TIMING(0x7, 0x7, 0x7)
#define SDMMC_CLKSEL_WAKEUP_INT BIT(11)
/* RCLK_EN register defines */
#define DATA_STROBE_EN BIT(0)
#define AXI_NON_BLOCKING_WR BIT(7)
/* DLINE_CTRL register defines */
#define DQS_CTRL_RD_DELAY(x, y) (((x) & ~0x3FF) | ((y) & 0x3FF))
#define DQS_CTRL_GET_RD_DELAY(x) ((x) & 0x3FF)
/* Protector Register */
#define SDMMC_EMMCP_BASE 0x1000
#define SDMMC_MPSECURITY (SDMMC_EMMCP_BASE + 0x0010)
#define SDMMC_MPSBEGIN0 (SDMMC_EMMCP_BASE + 0x0200)
#define SDMMC_MPSEND0 (SDMMC_EMMCP_BASE + 0x0204)
#define SDMMC_MPSCTRL0 (SDMMC_EMMCP_BASE + 0x020C)
/* SMU control defines */
#define SDMMC_MPSCTRL_SECURE_READ_BIT BIT(7)
#define SDMMC_MPSCTRL_SECURE_WRITE_BIT BIT(6)
#define SDMMC_MPSCTRL_NON_SECURE_READ_BIT BIT(5)
#define SDMMC_MPSCTRL_NON_SECURE_WRITE_BIT BIT(4)
#define SDMMC_MPSCTRL_USE_FUSE_KEY BIT(3)
#define SDMMC_MPSCTRL_ECB_MODE BIT(2)
#define SDMMC_MPSCTRL_ENCRYPTION BIT(1)
#define SDMMC_MPSCTRL_VALID BIT(0)
/* Maximum number of Ending sector */
#define SDMMC_ENDING_SEC_NR_MAX 0xFFFFFFFF
/* Fixed clock divider */
#define EXYNOS4210_FIXED_CIU_CLK_DIV 2
#define EXYNOS4412_FIXED_CIU_CLK_DIV 4
#define HS400_FIXED_CIU_CLK_DIV 1
/* Minimal required clock frequency for cclkin, unit: HZ */
#define EXYNOS_CCLKIN_MIN 50000000
#endif /* _DW_MMC_EXYNOS_H_ */