linux-stable/include/linux/serial_8250.h
Jiaqing Zhao a82d62f708 Revert "8250: add support for ASIX devices with a FIFO bug"
This reverts commit eb26dfe8aa.

Commit eb26dfe8aa ("8250: add support for ASIX devices with a FIFO
bug") merged on Jul 13, 2012 adds a quirk for PCI_VENDOR_ID_ASIX
(0x9710). But that ID is the same as PCI_VENDOR_ID_NETMOS defined in
1f8b061050c7 ("[PATCH] Netmos parallel/serial/combo support") merged
on Mar 28, 2005. In pci_serial_quirks array, the NetMos entry always
takes precedence over the ASIX entry even since it was initially
merged, code in that commit is always unreachable.

In my tests, adding the FIFO workaround to pci_netmos_init() makes no
difference, and the vendor driver also does not have such workaround.
Given that the code was never used for over a decade, it's safe to
revert it.

Also, the real PCI_VENDOR_ID_ASIX should be 0x125b, which is used on
their newer AX99100 PCIe serial controllers released on 2016. The FIFO
workaround should not be intended for these newer controllers, and it
was never implemented in vendor driver.

Fixes: eb26dfe8aa ("8250: add support for ASIX devices with a FIFO bug")
Cc: stable <stable@kernel.org>
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230619155743.827859-1-jiaqing.zhao@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21 17:55:53 +02:00

221 lines
7.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* linux/include/linux/serial_8250.h
*
* Copyright (C) 2004 Russell King
*/
#ifndef _LINUX_SERIAL_8250_H
#define _LINUX_SERIAL_8250_H
#include <linux/errno.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/platform_device.h>
struct uart_8250_port;
/*
* This is the platform device platform_data structure
*
* @mapsize: Port size for ioremap()
* @bugs: Port bugs
*
* @dl_read: ``u32 ()(struct uart_8250_port *up)``
*
* UART divisor latch read.
*
* @dl_write: ``void ()(struct uart_8250_port *up, u32 value)``
*
* Write @value into UART divisor latch.
*
* Locking: Caller holds port's lock.
*/
struct plat_serial8250_port {
unsigned long iobase; /* io base address */
void __iomem *membase; /* ioremap cookie or NULL */
resource_size_t mapbase; /* resource base */
resource_size_t mapsize;
unsigned int uartclk; /* UART clock rate */
unsigned int irq; /* interrupt number */
unsigned long irqflags; /* request_irq flags */
void *private_data;
unsigned char regshift; /* register shift */
unsigned char iotype; /* UPIO_* */
unsigned char hub6;
unsigned char has_sysrq; /* supports magic SysRq */
unsigned int type; /* If UPF_FIXED_TYPE */
upf_t flags; /* UPF_* flags */
u16 bugs; /* port bugs */
unsigned int (*serial_in)(struct uart_port *, int);
void (*serial_out)(struct uart_port *, int, int);
u32 (*dl_read)(struct uart_8250_port *up);
void (*dl_write)(struct uart_8250_port *up, u32 value);
void (*set_termios)(struct uart_port *,
struct ktermios *new,
const struct ktermios *old);
void (*set_ldisc)(struct uart_port *,
struct ktermios *);
unsigned int (*get_mctrl)(struct uart_port *);
int (*handle_irq)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned old);
void (*handle_break)(struct uart_port *);
};
/*
* Allocate 8250 platform device IDs. Nothing is implied by
* the numbering here, except for the legacy entry being -1.
*/
enum {
PLAT8250_DEV_LEGACY = -1,
PLAT8250_DEV_PLATFORM,
PLAT8250_DEV_PLATFORM1,
PLAT8250_DEV_PLATFORM2,
PLAT8250_DEV_FOURPORT,
PLAT8250_DEV_ACCENT,
PLAT8250_DEV_BOCA,
PLAT8250_DEV_EXAR_ST16C554,
PLAT8250_DEV_HUB6,
PLAT8250_DEV_AU1X00,
PLAT8250_DEV_SM501,
};
struct uart_8250_dma;
struct uart_8250_port;
/**
* 8250 core driver operations
*
* @setup_irq() Setup irq handling. The universal 8250 driver links this
* port to the irq chain. Other drivers may @request_irq().
* @release_irq() Undo irq handling. The universal 8250 driver unlinks
* the port from the irq chain.
*/
struct uart_8250_ops {
int (*setup_irq)(struct uart_8250_port *);
void (*release_irq)(struct uart_8250_port *);
void (*setup_timer)(struct uart_8250_port *);
};
struct uart_8250_em485 {
struct hrtimer start_tx_timer; /* "rs485 start tx" timer */
struct hrtimer stop_tx_timer; /* "rs485 stop tx" timer */
struct hrtimer *active_timer; /* pointer to active timer */
struct uart_8250_port *port; /* for hrtimer callbacks */
unsigned int tx_stopped:1; /* tx is currently stopped */
};
/*
* This should be used by drivers which want to register
* their own 8250 ports without registering their own
* platform device. Using these will make your driver
* dependent on the 8250 driver.
*
* @dl_read: ``u32 ()(struct uart_8250_port *port)``
*
* UART divisor latch read.
*
* @dl_write: ``void ()(struct uart_8250_port *port, u32 value)``
*
* Write @value into UART divisor latch.
*
* Locking: Caller holds port's lock.
*/
struct uart_8250_port {
struct uart_port port;
struct timer_list timer; /* "no irq" timer */
struct list_head list; /* ports on this IRQ */
u32 capabilities; /* port capabilities */
u16 bugs; /* port bugs */
unsigned int tx_loadsz; /* transmit fifo load size */
unsigned char acr;
unsigned char fcr;
unsigned char ier;
unsigned char lcr;
unsigned char mcr;
unsigned char cur_iotype; /* Running I/O type */
unsigned int rpm_tx_active;
unsigned char canary; /* non-zero during system sleep
* if no_console_suspend
*/
unsigned char probe;
struct mctrl_gpios *gpios;
#define UART_PROBE_RSA (1 << 0)
/*
* Some bits in registers are cleared on a read, so they must
* be saved whenever the register is read but the bits will not
* be immediately processed.
*/
#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
u16 lsr_saved_flags;
u16 lsr_save_mask;
#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
unsigned char msr_saved_flags;
struct uart_8250_dma *dma;
const struct uart_8250_ops *ops;
/* 8250 specific callbacks */
u32 (*dl_read)(struct uart_8250_port *up);
void (*dl_write)(struct uart_8250_port *up, u32 value);
struct uart_8250_em485 *em485;
void (*rs485_start_tx)(struct uart_8250_port *);
void (*rs485_stop_tx)(struct uart_8250_port *);
/* Serial port overrun backoff */
struct delayed_work overrun_backoff;
u32 overrun_backoff_time_ms;
};
static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up)
{
return container_of(up, struct uart_8250_port, port);
}
int serial8250_register_8250_port(const struct uart_8250_port *);
void serial8250_unregister_port(int line);
void serial8250_suspend_port(int line);
void serial8250_resume_port(int line);
int early_serial_setup(struct uart_port *port);
int early_serial8250_setup(struct earlycon_device *device, const char *options);
void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk);
void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
const struct ktermios *old);
void serial8250_do_set_ldisc(struct uart_port *port, struct ktermios *termios);
unsigned int serial8250_do_get_mctrl(struct uart_port *port);
int serial8250_do_startup(struct uart_port *port);
void serial8250_do_shutdown(struct uart_port *port);
void serial8250_do_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate);
void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl);
void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud,
unsigned int quot, unsigned int quot_frac);
int fsl8250_handle_irq(struct uart_port *port);
int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
u16 serial8250_rx_chars(struct uart_8250_port *up, u16 lsr);
void serial8250_read_char(struct uart_8250_port *up, u16 lsr);
void serial8250_tx_chars(struct uart_8250_port *up);
unsigned int serial8250_modem_status(struct uart_8250_port *up);
void serial8250_init_port(struct uart_8250_port *up);
void serial8250_set_defaults(struct uart_8250_port *up);
void serial8250_console_write(struct uart_8250_port *up, const char *s,
unsigned int count);
int serial8250_console_setup(struct uart_port *port, char *options, bool probe);
int serial8250_console_exit(struct uart_port *port);
void serial8250_set_isa_configurator(void (*v)(int port, struct uart_port *up,
u32 *capabilities));
#ifdef CONFIG_SERIAL_8250_RT288X
int rt288x_setup(struct uart_port *p);
int au_platform_setup(struct plat_serial8250_port *p);
#else
static inline int rt288x_setup(struct uart_port *p) { return -ENODEV; }
static inline int au_platform_setup(struct plat_serial8250_port *p) { return -ENODEV; }
#endif
#endif