linux-stable/drivers/net/ethernet/intel/ice/ice_hwmon.c
Konrad Knitter 4da71a77fc ice: read internal temperature sensor
Since 4.30 firmware exposes internal thermal sensor reading via admin
queue commands. Expose those readouts via hwmon API when supported.

Datasheet:

Get Sensor Reading Command (Opcode: 0x0632)

+--------------------+--------+--------------------+-------------------------+
| Name               | Bytes  | Value              |          Remarks        |
+--------------------+--------+--------------------+-------------------------+
| Flags              | 1-0    |                    |                         |
| Opcode             | 2-3    | 0x0632             | Command opcode          |
| Datalen            | 4-5    | 0                  | No external buffer.     |
| Return value       | 6-7    |                    | Return value.           |
| Cookie High        | 8-11   | Cookie             |                         |
| Cookie Low         | 12-15  | Cookie             |                         |
| Sensor             | 16     |                    | 0x00: Internal temp     |
|                    |        |                    | 0x01-0xFF: Reserved.    |
| Format             | 17     | Requested response | Only 0x00 is supported. |
|                    |        | format             | 0x01-0xFF: Reserved.    |
| Reserved           | 18-23  |                    |                         |
| Data Address high  | 24-27  | Response buffer    |                         |
|                    |        | address            |                         |
| Data Address low   | 28-31  | Response buffer    |                         |
|                    |        | address            |                         |
+--------------------+--------+--------------------+-------------------------+

Get Sensor Reading Response (Opcode: 0x0632)

+--------------------+--------+--------------------+-------------------------+
| Name               | Bytes  | Value              |          Remarks        |
+--------------------+--------+--------------------+-------------------------+
| Flags              | 1-0    |                    |                         |
| Opcode             | 2-3    | 0x0632             | Command opcode          |
| Datalen            | 4-5    | 0                  | No external buffer      |
| Return value       | 6-7    |                    | Return value.           |
|                    |        |                    | EINVAL: Invalid         |
|                    |        |                    | parameters              |
|                    |        |                    | ENOENT: Unsupported     |
|                    |        |                    | sensor                  |
|                    |        |                    | EIO: Sensor access      |
|                    |        |                    | error                   |
| Cookie High        | 8-11   | Cookie             |                         |
| Cookie Low         | 12-15  | Cookie             |                         |
| Sensor Reading     | 16-23  |                    | Format of the reading   |
|                    |        |                    | is dependent on request |
| Data Address high  | 24-27  | Response buffer    |                         |
|                    |        | address            |                         |
| Data Address low   | 28-31  | Response buffer    |                         |
|                    |        | address            |                         |
+--------------------+--------+--------------------+-------------------------+

Sensor Reading for Sensor 0x00 (Internal Chip Temperature):

+--------------------+--------+--------------------+-------------------------+
| Name               | Bytes  | Value              |          Remarks        |
+--------------------+--------+--------------------+-------------------------+
| Thermal Sensor     | 0      |                    | Reading in degrees      |
| reading            |        |                    | Celsius. Signed int8    |
| Warning High       | 1      |                    | Warning High threshold  |
| threshold          |        |                    | in degrees Celsius.     |
|                    |        |                    | Unsigned int8.          |
|                    |        |                    | 0xFF when unsupported   |
| Critical High      | 2      |                    | Critical High threshold |
| threshold          |        |                    | in degrees Celsius.     |
|                    |        |                    | Unsigned int8.          |
|                    |        |                    | 0xFF when unsupported   |
| Fatal High         | 3      |                    | Fatal High threshold    |
| threshold          |        |                    | in degrees Celsius.     |
|                    |        |                    | Unsigned int8.          |
|                    |        |                    | 0xFF when unsupported   |
| Reserved           | 4-7    |                    |                         |
+--------------------+--------+--------------------+-------------------------+

Driver provides current reading from HW as well as device specific
thresholds for thermal alarm (Warning, Critical, Fatal) events.

$ sensors

Output
=========================================================
ice-pci-b100
Adapter: PCI adapter
temp1:        +62.0°C  (high = +95.0°C, crit = +105.0°C)
                       (emerg = +115.0°C)

Tested on Intel Corporation Ethernet Controller E810-C for SFP

Co-developed-by: Marcin Domagala <marcinx.domagala@intel.com>
Signed-off-by: Marcin Domagala <marcinx.domagala@intel.com>
Co-developed-by: Eric Joyner <eric.joyner@intel.com>
Signed-off-by: Eric Joyner <eric.joyner@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-05 11:40:12 +01:00

126 lines
2.7 KiB
C

// SPDX-License-Identifier: GPL-2.0
/* Copyright (C) 2023, Intel Corporation. */
#include "ice.h"
#include "ice_hwmon.h"
#include "ice_adminq_cmd.h"
#include <linux/hwmon.h>
#define TEMP_FROM_REG(reg) ((reg) * 1000)
static const struct hwmon_channel_info *ice_hwmon_info[] = {
HWMON_CHANNEL_INFO(temp,
HWMON_T_INPUT | HWMON_T_MAX |
HWMON_T_CRIT | HWMON_T_EMERGENCY),
NULL
};
static int ice_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *val)
{
struct ice_aqc_get_sensor_reading_resp resp;
struct ice_pf *pf = dev_get_drvdata(dev);
int ret;
if (type != hwmon_temp)
return -EOPNOTSUPP;
ret = ice_aq_get_sensor_reading(&pf->hw, &resp);
if (ret) {
dev_warn_ratelimited(dev,
"%s HW read failure (%d)\n",
__func__,
ret);
return ret;
}
switch (attr) {
case hwmon_temp_input:
*val = TEMP_FROM_REG(resp.data.s0f0.temp);
break;
case hwmon_temp_max:
*val = TEMP_FROM_REG(resp.data.s0f0.temp_warning_threshold);
break;
case hwmon_temp_crit:
*val = TEMP_FROM_REG(resp.data.s0f0.temp_critical_threshold);
break;
case hwmon_temp_emergency:
*val = TEMP_FROM_REG(resp.data.s0f0.temp_fatal_threshold);
break;
default:
dev_dbg(dev, "%s unsupported attribute (%d)\n",
__func__, attr);
return -EOPNOTSUPP;
}
return 0;
}
static umode_t ice_hwmon_is_visible(const void *data,
enum hwmon_sensor_types type, u32 attr,
int channel)
{
if (type != hwmon_temp)
return 0;
switch (attr) {
case hwmon_temp_input:
case hwmon_temp_crit:
case hwmon_temp_max:
case hwmon_temp_emergency:
return 0444;
}
return 0;
}
static const struct hwmon_ops ice_hwmon_ops = {
.is_visible = ice_hwmon_is_visible,
.read = ice_hwmon_read
};
static const struct hwmon_chip_info ice_chip_info = {
.ops = &ice_hwmon_ops,
.info = ice_hwmon_info
};
static bool ice_is_internal_reading_supported(struct ice_pf *pf)
{
/* Only the first PF will report temperature for a chip.
* Note that internal temp reading is not supported
* for older FW (< v4.30).
*/
if (pf->hw.pf_id)
return false;
unsigned long sensors = pf->hw.dev_caps.supported_sensors;
return _test_bit(ICE_SENSOR_SUPPORT_E810_INT_TEMP_BIT, &sensors);
};
void ice_hwmon_init(struct ice_pf *pf)
{
struct device *dev = ice_pf_to_dev(pf);
struct device *hdev;
if (!ice_is_internal_reading_supported(pf))
return;
hdev = hwmon_device_register_with_info(dev, "ice", pf, &ice_chip_info,
NULL);
if (IS_ERR(hdev)) {
dev_warn(dev,
"hwmon_device_register_with_info returns error (%ld)",
PTR_ERR(hdev));
return;
}
pf->hwmon_dev = hdev;
}
void ice_hwmon_exit(struct ice_pf *pf)
{
if (!pf->hwmon_dev)
return;
hwmon_device_unregister(pf->hwmon_dev);
}