mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 10:49:33 +00:00
![Vitaly Wool](/assets/img/avatar_default.png)
Add UART support for PNX8330/8550/8950 Philips MIPS-based SoCs. Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
852 lines
21 KiB
C
852 lines
21 KiB
C
/*
|
|
* UART driver for PNX8XXX SoCs
|
|
*
|
|
* Author: Per Hallsmark per.hallsmark@mvista.com
|
|
* Ported to 2.6 kernel by EmbeddedAlley
|
|
* Reworked by Vitaly Wool <vitalywool@gmail.com>
|
|
*
|
|
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
|
|
* Copyright (C) 2000 Deep Blue Solutions Ltd.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of
|
|
* any kind, whether express or implied.
|
|
*
|
|
*/
|
|
|
|
#if defined(CONFIG_SERIAL_PNX8XXX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
|
#define SUPPORT_SYSRQ
|
|
#endif
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/console.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_pnx8xxx.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
|
|
/* We'll be using StrongARM sa1100 serial port major/minor */
|
|
#define SERIAL_PNX8XXX_MAJOR 204
|
|
#define MINOR_START 5
|
|
|
|
#define NR_PORTS 2
|
|
|
|
#define PNX8XXX_ISR_PASS_LIMIT 256
|
|
|
|
/*
|
|
* Convert from ignore_status_mask or read_status_mask to FIFO
|
|
* and interrupt status bits
|
|
*/
|
|
#define SM_TO_FIFO(x) ((x) >> 10)
|
|
#define SM_TO_ISTAT(x) ((x) & 0x000001ff)
|
|
#define FIFO_TO_SM(x) ((x) << 10)
|
|
#define ISTAT_TO_SM(x) ((x) & 0x000001ff)
|
|
|
|
/*
|
|
* This is the size of our serial port register set.
|
|
*/
|
|
#define UART_PORT_SIZE 0x1000
|
|
|
|
/*
|
|
* This determines how often we check the modem status signals
|
|
* for any change. They generally aren't connected to an IRQ
|
|
* so we have to poll them. We also check immediately before
|
|
* filling the TX fifo incase CTS has been dropped.
|
|
*/
|
|
#define MCTRL_TIMEOUT (250*HZ/1000)
|
|
|
|
extern struct pnx8xxx_port pnx8xxx_ports[];
|
|
|
|
static inline int serial_in(struct pnx8xxx_port *sport, int offset)
|
|
{
|
|
return (__raw_readl(sport->port.membase + offset));
|
|
}
|
|
|
|
static inline void serial_out(struct pnx8xxx_port *sport, int offset, int value)
|
|
{
|
|
__raw_writel(value, sport->port.membase + offset);
|
|
}
|
|
|
|
/*
|
|
* Handle any change of modem status signal since we were last called.
|
|
*/
|
|
static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport)
|
|
{
|
|
unsigned int status, changed;
|
|
|
|
status = sport->port.ops->get_mctrl(&sport->port);
|
|
changed = status ^ sport->old_status;
|
|
|
|
if (changed == 0)
|
|
return;
|
|
|
|
sport->old_status = status;
|
|
|
|
if (changed & TIOCM_RI)
|
|
sport->port.icount.rng++;
|
|
if (changed & TIOCM_DSR)
|
|
sport->port.icount.dsr++;
|
|
if (changed & TIOCM_CAR)
|
|
uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
|
|
if (changed & TIOCM_CTS)
|
|
uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
|
|
|
|
wake_up_interruptible(&sport->port.info->delta_msr_wait);
|
|
}
|
|
|
|
/*
|
|
* This is our per-port timeout handler, for checking the
|
|
* modem status signals.
|
|
*/
|
|
static void pnx8xxx_timeout(unsigned long data)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)data;
|
|
unsigned long flags;
|
|
|
|
if (sport->port.info) {
|
|
spin_lock_irqsave(&sport->port.lock, flags);
|
|
pnx8xxx_mctrl_check(sport);
|
|
spin_unlock_irqrestore(&sport->port.lock, flags);
|
|
|
|
mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* interrupts disabled on entry
|
|
*/
|
|
static void pnx8xxx_stop_tx(struct uart_port *port)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
u32 ien;
|
|
|
|
/* Disable TX intr */
|
|
ien = serial_in(sport, PNX8XXX_IEN);
|
|
serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLTX);
|
|
|
|
/* Clear all pending TX intr */
|
|
serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX);
|
|
}
|
|
|
|
/*
|
|
* interrupts may not be disabled on entry
|
|
*/
|
|
static void pnx8xxx_start_tx(struct uart_port *port)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
u32 ien;
|
|
|
|
/* Clear all pending TX intr */
|
|
serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX);
|
|
|
|
/* Enable TX intr */
|
|
ien = serial_in(sport, PNX8XXX_IEN);
|
|
serial_out(sport, PNX8XXX_IEN, ien | PNX8XXX_UART_INT_ALLTX);
|
|
}
|
|
|
|
/*
|
|
* Interrupts enabled
|
|
*/
|
|
static void pnx8xxx_stop_rx(struct uart_port *port)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
u32 ien;
|
|
|
|
/* Disable RX intr */
|
|
ien = serial_in(sport, PNX8XXX_IEN);
|
|
serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLRX);
|
|
|
|
/* Clear all pending RX intr */
|
|
serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX);
|
|
}
|
|
|
|
/*
|
|
* Set the modem control timer to fire immediately.
|
|
*/
|
|
static void pnx8xxx_enable_ms(struct uart_port *port)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
|
|
mod_timer(&sport->timer, jiffies);
|
|
}
|
|
|
|
static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
|
|
{
|
|
struct tty_struct *tty = sport->port.info->tty;
|
|
unsigned int status, ch, flg;
|
|
|
|
status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
|
|
ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
|
|
while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) {
|
|
ch = serial_in(sport, PNX8XXX_FIFO);
|
|
|
|
sport->port.icount.rx++;
|
|
|
|
flg = TTY_NORMAL;
|
|
|
|
/*
|
|
* note that the error handling code is
|
|
* out of the main execution path
|
|
*/
|
|
if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE |
|
|
PNX8XXX_UART_FIFO_RXPAR) |
|
|
ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) {
|
|
if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
|
|
sport->port.icount.parity++;
|
|
else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
|
|
sport->port.icount.frame++;
|
|
if (status & ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))
|
|
sport->port.icount.overrun++;
|
|
|
|
status &= sport->port.read_status_mask;
|
|
|
|
if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
|
|
flg = TTY_PARITY;
|
|
else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
|
|
flg = TTY_FRAME;
|
|
|
|
#ifdef SUPPORT_SYSRQ
|
|
sport->port.sysrq = 0;
|
|
#endif
|
|
}
|
|
|
|
if (uart_handle_sysrq_char(&sport->port, ch))
|
|
goto ignore_char;
|
|
|
|
uart_insert_char(&sport->port, status,
|
|
ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN), ch, flg);
|
|
|
|
ignore_char:
|
|
serial_out(sport, PNX8XXX_LCR, serial_in(sport, PNX8XXX_LCR) |
|
|
PNX8XXX_UART_LCR_RX_NEXT);
|
|
status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
|
|
ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
|
|
}
|
|
tty_flip_buffer_push(tty);
|
|
}
|
|
|
|
static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport)
|
|
{
|
|
struct circ_buf *xmit = &sport->port.info->xmit;
|
|
|
|
if (sport->port.x_char) {
|
|
serial_out(sport, PNX8XXX_FIFO, sport->port.x_char);
|
|
sport->port.icount.tx++;
|
|
sport->port.x_char = 0;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Check the modem control lines before
|
|
* transmitting anything.
|
|
*/
|
|
pnx8xxx_mctrl_check(sport);
|
|
|
|
if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
|
|
pnx8xxx_stop_tx(&sport->port);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* TX while bytes available
|
|
*/
|
|
while (((serial_in(sport, PNX8XXX_FIFO) &
|
|
PNX8XXX_UART_FIFO_TXFIFO) >> 16) < 16) {
|
|
serial_out(sport, PNX8XXX_FIFO, xmit->buf[xmit->tail]);
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
sport->port.icount.tx++;
|
|
if (uart_circ_empty(xmit))
|
|
break;
|
|
}
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(&sport->port);
|
|
|
|
if (uart_circ_empty(xmit))
|
|
pnx8xxx_stop_tx(&sport->port);
|
|
}
|
|
|
|
static irqreturn_t pnx8xxx_int(int irq, void *dev_id)
|
|
{
|
|
struct pnx8xxx_port *sport = dev_id;
|
|
unsigned int status;
|
|
|
|
spin_lock(&sport->port.lock);
|
|
/* Get the interrupts */
|
|
status = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN);
|
|
|
|
/* Break signal received */
|
|
if (status & PNX8XXX_UART_INT_BREAK) {
|
|
sport->port.icount.brk++;
|
|
uart_handle_break(&sport->port);
|
|
}
|
|
|
|
/* Byte received */
|
|
if (status & PNX8XXX_UART_INT_RX)
|
|
pnx8xxx_rx_chars(sport);
|
|
|
|
/* TX holding register empty - transmit a byte */
|
|
if (status & PNX8XXX_UART_INT_TX)
|
|
pnx8xxx_tx_chars(sport);
|
|
|
|
/* Clear the ISTAT register */
|
|
serial_out(sport, PNX8XXX_ICLR, status);
|
|
|
|
spin_unlock(&sport->port.lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* Return TIOCSER_TEMT when transmitter is not busy.
|
|
*/
|
|
static unsigned int pnx8xxx_tx_empty(struct uart_port *port)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
|
|
return serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA ? 0 : TIOCSER_TEMT;
|
|
}
|
|
|
|
static unsigned int pnx8xxx_get_mctrl(struct uart_port *port)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
unsigned int mctrl = TIOCM_DSR;
|
|
unsigned int msr;
|
|
|
|
/* REVISIT */
|
|
|
|
msr = serial_in(sport, PNX8XXX_MCR);
|
|
|
|
mctrl |= msr & PNX8XXX_UART_MCR_CTS ? TIOCM_CTS : 0;
|
|
mctrl |= msr & PNX8XXX_UART_MCR_DCD ? TIOCM_CAR : 0;
|
|
|
|
return mctrl;
|
|
}
|
|
|
|
static void pnx8xxx_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
#if 0 /* FIXME */
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
unsigned int msr;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Interrupts always disabled.
|
|
*/
|
|
static void pnx8xxx_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
unsigned long flags;
|
|
unsigned int lcr;
|
|
|
|
spin_lock_irqsave(&sport->port.lock, flags);
|
|
lcr = serial_in(sport, PNX8XXX_LCR);
|
|
if (break_state == -1)
|
|
lcr |= PNX8XXX_UART_LCR_TXBREAK;
|
|
else
|
|
lcr &= ~PNX8XXX_UART_LCR_TXBREAK;
|
|
serial_out(sport, PNX8XXX_LCR, lcr);
|
|
spin_unlock_irqrestore(&sport->port.lock, flags);
|
|
}
|
|
|
|
static int pnx8xxx_startup(struct uart_port *port)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
int retval;
|
|
|
|
/*
|
|
* Allocate the IRQ
|
|
*/
|
|
retval = request_irq(sport->port.irq, pnx8xxx_int, 0,
|
|
"pnx8xxx-uart", sport);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/*
|
|
* Finally, clear and enable interrupts
|
|
*/
|
|
|
|
serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX |
|
|
PNX8XXX_UART_INT_ALLTX);
|
|
|
|
serial_out(sport, PNX8XXX_IEN, serial_in(sport, PNX8XXX_IEN) |
|
|
PNX8XXX_UART_INT_ALLRX |
|
|
PNX8XXX_UART_INT_ALLTX);
|
|
|
|
/*
|
|
* Enable modem status interrupts
|
|
*/
|
|
spin_lock_irq(&sport->port.lock);
|
|
pnx8xxx_enable_ms(&sport->port);
|
|
spin_unlock_irq(&sport->port.lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pnx8xxx_shutdown(struct uart_port *port)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
int lcr;
|
|
|
|
/*
|
|
* Stop our timer.
|
|
*/
|
|
del_timer_sync(&sport->timer);
|
|
|
|
/*
|
|
* Disable all interrupts
|
|
*/
|
|
serial_out(sport, PNX8XXX_IEN, 0);
|
|
|
|
/*
|
|
* Reset the Tx and Rx FIFOS, disable the break condition
|
|
*/
|
|
lcr = serial_in(sport, PNX8XXX_LCR);
|
|
lcr &= ~PNX8XXX_UART_LCR_TXBREAK;
|
|
lcr |= PNX8XXX_UART_LCR_TX_RST | PNX8XXX_UART_LCR_RX_RST;
|
|
serial_out(sport, PNX8XXX_LCR, lcr);
|
|
|
|
/*
|
|
* Clear all interrupts
|
|
*/
|
|
serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX |
|
|
PNX8XXX_UART_INT_ALLTX);
|
|
|
|
/*
|
|
* Free the interrupt
|
|
*/
|
|
free_irq(sport->port.irq, sport);
|
|
}
|
|
|
|
static void
|
|
pnx8xxx_set_termios(struct uart_port *port, struct ktermios *termios,
|
|
struct ktermios *old)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
unsigned long flags;
|
|
unsigned int lcr_fcr, old_ien, baud, quot;
|
|
unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
|
|
|
|
/*
|
|
* We only support CS7 and CS8.
|
|
*/
|
|
while ((termios->c_cflag & CSIZE) != CS7 &&
|
|
(termios->c_cflag & CSIZE) != CS8) {
|
|
termios->c_cflag &= ~CSIZE;
|
|
termios->c_cflag |= old_csize;
|
|
old_csize = CS8;
|
|
}
|
|
|
|
if ((termios->c_cflag & CSIZE) == CS8)
|
|
lcr_fcr = PNX8XXX_UART_LCR_8BIT;
|
|
else
|
|
lcr_fcr = 0;
|
|
|
|
if (termios->c_cflag & CSTOPB)
|
|
lcr_fcr |= PNX8XXX_UART_LCR_2STOPB;
|
|
if (termios->c_cflag & PARENB) {
|
|
lcr_fcr |= PNX8XXX_UART_LCR_PAREN;
|
|
if (!(termios->c_cflag & PARODD))
|
|
lcr_fcr |= PNX8XXX_UART_LCR_PAREVN;
|
|
}
|
|
|
|
/*
|
|
* Ask the core to calculate the divisor for us.
|
|
*/
|
|
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
|
|
quot = uart_get_divisor(port, baud);
|
|
|
|
spin_lock_irqsave(&sport->port.lock, flags);
|
|
|
|
sport->port.read_status_mask = ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN) |
|
|
ISTAT_TO_SM(PNX8XXX_UART_INT_EMPTY) |
|
|
ISTAT_TO_SM(PNX8XXX_UART_INT_RX);
|
|
if (termios->c_iflag & INPCK)
|
|
sport->port.read_status_mask |=
|
|
FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
|
|
FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR);
|
|
if (termios->c_iflag & (BRKINT | PARMRK))
|
|
sport->port.read_status_mask |=
|
|
ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK);
|
|
|
|
/*
|
|
* Characters to ignore
|
|
*/
|
|
sport->port.ignore_status_mask = 0;
|
|
if (termios->c_iflag & IGNPAR)
|
|
sport->port.ignore_status_mask |=
|
|
FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
|
|
FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR);
|
|
if (termios->c_iflag & IGNBRK) {
|
|
sport->port.ignore_status_mask |=
|
|
ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK);
|
|
/*
|
|
* If we're ignoring parity and break indicators,
|
|
* ignore overruns too (for real raw support).
|
|
*/
|
|
if (termios->c_iflag & IGNPAR)
|
|
sport->port.ignore_status_mask |=
|
|
ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN);
|
|
}
|
|
|
|
/*
|
|
* ignore all characters if CREAD is not set
|
|
*/
|
|
if ((termios->c_cflag & CREAD) == 0)
|
|
sport->port.ignore_status_mask |=
|
|
ISTAT_TO_SM(PNX8XXX_UART_INT_RX);
|
|
|
|
del_timer_sync(&sport->timer);
|
|
|
|
/*
|
|
* Update the per-port timeout.
|
|
*/
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
/*
|
|
* disable interrupts and drain transmitter
|
|
*/
|
|
old_ien = serial_in(sport, PNX8XXX_IEN);
|
|
serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX |
|
|
PNX8XXX_UART_INT_ALLRX));
|
|
|
|
while (serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA)
|
|
barrier();
|
|
|
|
/* then, disable everything */
|
|
serial_out(sport, PNX8XXX_IEN, 0);
|
|
|
|
/* Reset the Rx and Tx FIFOs too */
|
|
lcr_fcr |= PNX8XXX_UART_LCR_TX_RST;
|
|
lcr_fcr |= PNX8XXX_UART_LCR_RX_RST;
|
|
|
|
/* set the parity, stop bits and data size */
|
|
serial_out(sport, PNX8XXX_LCR, lcr_fcr);
|
|
|
|
/* set the baud rate */
|
|
quot -= 1;
|
|
serial_out(sport, PNX8XXX_BAUD, quot);
|
|
|
|
serial_out(sport, PNX8XXX_ICLR, -1);
|
|
|
|
serial_out(sport, PNX8XXX_IEN, old_ien);
|
|
|
|
if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
|
|
pnx8xxx_enable_ms(&sport->port);
|
|
|
|
spin_unlock_irqrestore(&sport->port.lock, flags);
|
|
}
|
|
|
|
static const char *pnx8xxx_type(struct uart_port *port)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
|
|
return sport->port.type == PORT_PNX8XXX ? "PNX8XXX" : NULL;
|
|
}
|
|
|
|
/*
|
|
* Release the memory region(s) being used by 'port'.
|
|
*/
|
|
static void pnx8xxx_release_port(struct uart_port *port)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
|
|
release_mem_region(sport->port.mapbase, UART_PORT_SIZE);
|
|
}
|
|
|
|
/*
|
|
* Request the memory region(s) being used by 'port'.
|
|
*/
|
|
static int pnx8xxx_request_port(struct uart_port *port)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
return request_mem_region(sport->port.mapbase, UART_PORT_SIZE,
|
|
"pnx8xxx-uart") != NULL ? 0 : -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* Configure/autoconfigure the port.
|
|
*/
|
|
static void pnx8xxx_config_port(struct uart_port *port, int flags)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
|
|
if (flags & UART_CONFIG_TYPE &&
|
|
pnx8xxx_request_port(&sport->port) == 0)
|
|
sport->port.type = PORT_PNX8XXX;
|
|
}
|
|
|
|
/*
|
|
* Verify the new serial_struct (for TIOCSSERIAL).
|
|
* The only change we allow are to the flags and type, and
|
|
* even then only between PORT_PNX8XXX and PORT_UNKNOWN
|
|
*/
|
|
static int
|
|
pnx8xxx_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
int ret = 0;
|
|
|
|
if (ser->type != PORT_UNKNOWN && ser->type != PORT_PNX8XXX)
|
|
ret = -EINVAL;
|
|
if (sport->port.irq != ser->irq)
|
|
ret = -EINVAL;
|
|
if (ser->io_type != SERIAL_IO_MEM)
|
|
ret = -EINVAL;
|
|
if (sport->port.uartclk / 16 != ser->baud_base)
|
|
ret = -EINVAL;
|
|
if ((void *)sport->port.mapbase != ser->iomem_base)
|
|
ret = -EINVAL;
|
|
if (sport->port.iobase != ser->port)
|
|
ret = -EINVAL;
|
|
if (ser->hub6 != 0)
|
|
ret = -EINVAL;
|
|
return ret;
|
|
}
|
|
|
|
static struct uart_ops pnx8xxx_pops = {
|
|
.tx_empty = pnx8xxx_tx_empty,
|
|
.set_mctrl = pnx8xxx_set_mctrl,
|
|
.get_mctrl = pnx8xxx_get_mctrl,
|
|
.stop_tx = pnx8xxx_stop_tx,
|
|
.start_tx = pnx8xxx_start_tx,
|
|
.stop_rx = pnx8xxx_stop_rx,
|
|
.enable_ms = pnx8xxx_enable_ms,
|
|
.break_ctl = pnx8xxx_break_ctl,
|
|
.startup = pnx8xxx_startup,
|
|
.shutdown = pnx8xxx_shutdown,
|
|
.set_termios = pnx8xxx_set_termios,
|
|
.type = pnx8xxx_type,
|
|
.release_port = pnx8xxx_release_port,
|
|
.request_port = pnx8xxx_request_port,
|
|
.config_port = pnx8xxx_config_port,
|
|
.verify_port = pnx8xxx_verify_port,
|
|
};
|
|
|
|
|
|
/*
|
|
* Setup the PNX8XXX serial ports.
|
|
*
|
|
* Note also that we support "console=ttySx" where "x" is either 0 or 1.
|
|
*/
|
|
static void __init pnx8xxx_init_ports(void)
|
|
{
|
|
static int first = 1;
|
|
int i;
|
|
|
|
if (!first)
|
|
return;
|
|
first = 0;
|
|
|
|
for (i = 0; i < NR_PORTS; i++) {
|
|
init_timer(&pnx8xxx_ports[i].timer);
|
|
pnx8xxx_ports[i].timer.function = pnx8xxx_timeout;
|
|
pnx8xxx_ports[i].timer.data = (unsigned long)&pnx8xxx_ports[i];
|
|
pnx8xxx_ports[i].port.ops = &pnx8xxx_pops;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_PNX8XXX_CONSOLE
|
|
|
|
static void pnx8xxx_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
|
|
int status;
|
|
|
|
do {
|
|
/* Wait for UART_TX register to empty */
|
|
status = serial_in(sport, PNX8XXX_FIFO);
|
|
} while (status & PNX8XXX_UART_FIFO_TXFIFO);
|
|
serial_out(sport, PNX8XXX_FIFO, ch);
|
|
}
|
|
|
|
/*
|
|
* Interrupts are disabled on entering
|
|
*/static void
|
|
pnx8xxx_console_write(struct console *co, const char *s, unsigned int count)
|
|
{
|
|
struct pnx8xxx_port *sport = &pnx8xxx_ports[co->index];
|
|
unsigned int old_ien, status;
|
|
|
|
/*
|
|
* First, save IEN and then disable interrupts
|
|
*/
|
|
old_ien = serial_in(sport, PNX8XXX_IEN);
|
|
serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX |
|
|
PNX8XXX_UART_INT_ALLRX));
|
|
|
|
uart_console_write(&sport->port, s, count, pnx8xxx_console_putchar);
|
|
|
|
/*
|
|
* Finally, wait for transmitter to become empty
|
|
* and restore IEN
|
|
*/
|
|
do {
|
|
/* Wait for UART_TX register to empty */
|
|
status = serial_in(sport, PNX8XXX_FIFO);
|
|
} while (status & PNX8XXX_UART_FIFO_TXFIFO);
|
|
|
|
/* Clear TX and EMPTY interrupt */
|
|
serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_TX |
|
|
PNX8XXX_UART_INT_EMPTY);
|
|
|
|
serial_out(sport, PNX8XXX_IEN, old_ien);
|
|
}
|
|
|
|
static int __init
|
|
pnx8xxx_console_setup(struct console *co, char *options)
|
|
{
|
|
struct pnx8xxx_port *sport;
|
|
int baud = 38400;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
/*
|
|
* Check whether an invalid uart number has been specified, and
|
|
* if so, search for the first available port that does have
|
|
* console support.
|
|
*/
|
|
if (co->index == -1 || co->index >= NR_PORTS)
|
|
co->index = 0;
|
|
sport = &pnx8xxx_ports[co->index];
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
|
|
return uart_set_options(&sport->port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static struct uart_driver pnx8xxx_reg;
|
|
static struct console pnx8xxx_console = {
|
|
.name = "ttyS",
|
|
.write = pnx8xxx_console_write,
|
|
.device = uart_console_device,
|
|
.setup = pnx8xxx_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &pnx8xxx_reg,
|
|
};
|
|
|
|
static int __init pnx8xxx_rs_console_init(void)
|
|
{
|
|
pnx8xxx_init_ports();
|
|
register_console(&pnx8xxx_console);
|
|
return 0;
|
|
}
|
|
console_initcall(pnx8xxx_rs_console_init);
|
|
|
|
#define PNX8XXX_CONSOLE &pnx8xxx_console
|
|
#else
|
|
#define PNX8XXX_CONSOLE NULL
|
|
#endif
|
|
|
|
static struct uart_driver pnx8xxx_reg = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = "ttyS",
|
|
.dev_name = "ttyS",
|
|
.major = SERIAL_PNX8XXX_MAJOR,
|
|
.minor = MINOR_START,
|
|
.nr = NR_PORTS,
|
|
.cons = PNX8XXX_CONSOLE,
|
|
};
|
|
|
|
static int pnx8xxx_serial_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
|
|
|
|
return uart_suspend_port(&pnx8xxx_reg, &sport->port);
|
|
}
|
|
|
|
static int pnx8xxx_serial_resume(struct platform_device *pdev)
|
|
{
|
|
struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
|
|
|
|
return uart_resume_port(&pnx8xxx_reg, &sport->port);
|
|
}
|
|
|
|
static int pnx8xxx_serial_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res = pdev->resource;
|
|
int i;
|
|
|
|
for (i = 0; i < pdev->num_resources; i++, res++) {
|
|
if (!(res->flags & IORESOURCE_MEM))
|
|
continue;
|
|
|
|
for (i = 0; i < NR_PORTS; i++) {
|
|
if (pnx8xxx_ports[i].port.mapbase != res->start)
|
|
continue;
|
|
|
|
pnx8xxx_ports[i].port.dev = &pdev->dev;
|
|
uart_add_one_port(&pnx8xxx_reg, &pnx8xxx_ports[i].port);
|
|
platform_set_drvdata(pdev, &pnx8xxx_ports[i]);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pnx8xxx_serial_remove(struct platform_device *pdev)
|
|
{
|
|
struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
if (sport)
|
|
uart_remove_one_port(&pnx8xxx_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver pnx8xxx_serial_driver = {
|
|
.driver = {
|
|
.name = "pnx8xxx-uart",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = pnx8xxx_serial_probe,
|
|
.remove = pnx8xxx_serial_remove,
|
|
.suspend = pnx8xxx_serial_suspend,
|
|
.resume = pnx8xxx_serial_resume,
|
|
};
|
|
|
|
static int __init pnx8xxx_serial_init(void)
|
|
{
|
|
int ret;
|
|
|
|
printk(KERN_INFO "Serial: PNX8XXX driver $Revision: 1.2 $\n");
|
|
|
|
pnx8xxx_init_ports();
|
|
|
|
ret = uart_register_driver(&pnx8xxx_reg);
|
|
if (ret == 0) {
|
|
ret = platform_driver_register(&pnx8xxx_serial_driver);
|
|
if (ret)
|
|
uart_unregister_driver(&pnx8xxx_reg);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void __exit pnx8xxx_serial_exit(void)
|
|
{
|
|
platform_driver_unregister(&pnx8xxx_serial_driver);
|
|
uart_unregister_driver(&pnx8xxx_reg);
|
|
}
|
|
|
|
module_init(pnx8xxx_serial_init);
|
|
module_exit(pnx8xxx_serial_exit);
|
|
|
|
MODULE_AUTHOR("Embedded Alley Solutions, Inc.");
|
|
MODULE_DESCRIPTION("PNX8XXX SoCs serial port driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_PNX8XXX_MAJOR);
|