linux-stable/drivers/irqchip/irq-mbigen.c
John Garry d6152e6ec9 irqchip/mbigen: Set driver .suppress_bind_attrs to avoid remove problems
The following crash can be seen for setting
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y for DT FW (which some people still use):

Hisilicon MBIGEN-V2 60080000.interrupt-controller: Failed to create mbi-gen irqdomain
Hisilicon MBIGEN-V2: probe of 60080000.interrupt-controller failed with error -12

[...]

Unable to handle kernel paging request at virtual address 0000000000005008
 Mem abort info:
   ESR = 0x96000004
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000004
   CM = 0, WnR = 0
 user pgtable: 4k pages, 48-bit VAs, pgdp=0000041fb9990000
 [0000000000005008] pgd=0000000000000000
 Internal error: Oops: 96000004 [#1] PREEMPT SMP
 Modules linked in:
 CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc6-00002-g3fc42638a506-dirty #1622
 Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018
 pstate: 40000085 (nZcv daIf -PAN -UAO)
 pc : mbigen_set_type+0x38/0x60
 lr : __irq_set_trigger+0x6c/0x188
 sp : ffff800014b4b400
 x29: ffff800014b4b400 x28: 0000000000000007
 x27: 0000000000000000 x26: 0000000000000000
 x25: ffff041fd83bd0d4 x24: ffff041fd83bd188
 x23: 0000000000000000 x22: ffff80001193ce00
 x21: 0000000000000004 x20: 0000000000000000
 x19: ffff041fd83bd000 x18: ffffffffffffffff
 x17: 0000000000000000 x16: 0000000000000000
 x15: ffff8000119098c8 x14: ffff041fb94ec91c
 x13: ffff041fb94ec1a1 x12: 0000000000000030
 x11: 0101010101010101 x10: 0000000000000040
 x9 : 0000000000000000 x8 : ffff041fb98c6680
 x7 : ffff800014b4b380 x6 : ffff041fd81636c8
 x5 : 0000000000000000 x4 : 000000000000025f
 x3 : 0000000000005000 x2 : 0000000000005008
 x1 : 0000000000000004 x0 : 0000000080000000
 Call trace:
  mbigen_set_type+0x38/0x60
  __setup_irq+0x744/0x900
  request_threaded_irq+0xe0/0x198
  pcie_pme_probe+0x98/0x118
  pcie_port_probe_service+0x38/0x78
  really_probe+0xa0/0x3e0
  driver_probe_device+0x58/0x100
  __device_attach_driver+0x90/0xb0
  bus_for_each_drv+0x64/0xc8
  __device_attach+0xd8/0x138
  device_initial_probe+0x10/0x18
  bus_probe_device+0x90/0x98
  device_add+0x4c4/0x770
  device_register+0x1c/0x28
  pcie_port_device_register+0x1e4/0x4f0
  pcie_portdrv_probe+0x34/0xd8
  local_pci_probe+0x3c/0xa0
  pci_device_probe+0x128/0x1c0
  really_probe+0xa0/0x3e0
  driver_probe_device+0x58/0x100
  __device_attach_driver+0x90/0xb0
  bus_for_each_drv+0x64/0xc8
  __device_attach+0xd8/0x138
  device_attach+0x10/0x18
  pci_bus_add_device+0x4c/0xb8
  pci_bus_add_devices+0x38/0x88
  pci_host_probe+0x3c/0xc0
  pci_host_common_probe+0xf0/0x208
  hisi_pcie_almost_ecam_probe+0x24/0x30
  platform_drv_probe+0x50/0xa0
  really_probe+0xa0/0x3e0
  driver_probe_device+0x58/0x100
  device_driver_attach+0x6c/0x90
  __driver_attach+0x84/0xc8
  bus_for_each_dev+0x74/0xc8
  driver_attach+0x20/0x28
  bus_add_driver+0x148/0x1f0
  driver_register+0x60/0x110
  __platform_driver_register+0x40/0x48
  hisi_pcie_almost_ecam_driver_init+0x1c/0x24

The specific problem here is that the mbigen driver real probe has failed
as the mbigen_of_create_domain()->of_platform_device_create() call fails,
the reason for that being that we never destroyed the platform device
created during the remove test dry run and there is some conflict.

Since we generally would never want to unbind this driver, and to save
adding a driver tear down path for that, just set the driver
.suppress_bind_attrs member to avoid this possibility.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1579196323-180137-1-git-send-email-john.garry@huawei.com
2020-01-20 19:10:04 +00:00

387 lines
9.2 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2015 Hisilicon Limited, All Rights Reserved.
* Author: Jun Ma <majun258@huawei.com>
* Author: Yun Wu <wuyun.wu@huawei.com>
*/
#include <linux/acpi.h>
#include <linux/interrupt.h>
#include <linux/irqchip.h>
#include <linux/module.h>
#include <linux/msi.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
/* Interrupt numbers per mbigen node supported */
#define IRQS_PER_MBIGEN_NODE 128
/* 64 irqs (Pin0-pin63) are reserved for each mbigen chip */
#define RESERVED_IRQ_PER_MBIGEN_CHIP 64
/* The maximum IRQ pin number of mbigen chip(start from 0) */
#define MAXIMUM_IRQ_PIN_NUM 1407
/**
* In mbigen vector register
* bit[21:12]: event id value
* bit[11:0]: device id
*/
#define IRQ_EVENT_ID_SHIFT 12
#define IRQ_EVENT_ID_MASK 0x3ff
/* register range of each mbigen node */
#define MBIGEN_NODE_OFFSET 0x1000
/* offset of vector register in mbigen node */
#define REG_MBIGEN_VEC_OFFSET 0x200
/**
* offset of clear register in mbigen node
* This register is used to clear the status
* of interrupt
*/
#define REG_MBIGEN_CLEAR_OFFSET 0xa000
/**
* offset of interrupt type register
* This register is used to configure interrupt
* trigger type
*/
#define REG_MBIGEN_TYPE_OFFSET 0x0
/**
* struct mbigen_device - holds the information of mbigen device.
*
* @pdev: pointer to the platform device structure of mbigen chip.
* @base: mapped address of this mbigen chip.
*/
struct mbigen_device {
struct platform_device *pdev;
void __iomem *base;
};
static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq)
{
unsigned int nid, pin;
hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP;
nid = hwirq / IRQS_PER_MBIGEN_NODE + 1;
pin = hwirq % IRQS_PER_MBIGEN_NODE;
return pin * 4 + nid * MBIGEN_NODE_OFFSET
+ REG_MBIGEN_VEC_OFFSET;
}
static inline void get_mbigen_type_reg(irq_hw_number_t hwirq,
u32 *mask, u32 *addr)
{
unsigned int nid, irq_ofst, ofst;
hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP;
nid = hwirq / IRQS_PER_MBIGEN_NODE + 1;
irq_ofst = hwirq % IRQS_PER_MBIGEN_NODE;
*mask = 1 << (irq_ofst % 32);
ofst = irq_ofst / 32 * 4;
*addr = ofst + nid * MBIGEN_NODE_OFFSET
+ REG_MBIGEN_TYPE_OFFSET;
}
static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq,
u32 *mask, u32 *addr)
{
unsigned int ofst = (hwirq / 32) * 4;
*mask = 1 << (hwirq % 32);
*addr = ofst + REG_MBIGEN_CLEAR_OFFSET;
}
static void mbigen_eoi_irq(struct irq_data *data)
{
void __iomem *base = data->chip_data;
u32 mask, addr;
get_mbigen_clear_reg(data->hwirq, &mask, &addr);
writel_relaxed(mask, base + addr);
irq_chip_eoi_parent(data);
}
static int mbigen_set_type(struct irq_data *data, unsigned int type)
{
void __iomem *base = data->chip_data;
u32 mask, addr, val;
if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
return -EINVAL;
get_mbigen_type_reg(data->hwirq, &mask, &addr);
val = readl_relaxed(base + addr);
if (type == IRQ_TYPE_LEVEL_HIGH)
val |= mask;
else
val &= ~mask;
writel_relaxed(val, base + addr);
return 0;
}
static struct irq_chip mbigen_irq_chip = {
.name = "mbigen-v2",
.irq_mask = irq_chip_mask_parent,
.irq_unmask = irq_chip_unmask_parent,
.irq_eoi = mbigen_eoi_irq,
.irq_set_type = mbigen_set_type,
.irq_set_affinity = irq_chip_set_affinity_parent,
};
static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg)
{
struct irq_data *d = irq_get_irq_data(desc->irq);
void __iomem *base = d->chip_data;
u32 val;
if (!msg->address_lo && !msg->address_hi)
return;
base += get_mbigen_vec_reg(d->hwirq);
val = readl_relaxed(base);
val &= ~(IRQ_EVENT_ID_MASK << IRQ_EVENT_ID_SHIFT);
val |= (msg->data << IRQ_EVENT_ID_SHIFT);
/* The address of doorbell is encoded in mbigen register by default
* So,we don't need to program the doorbell address at here
*/
writel_relaxed(val, base);
}
static int mbigen_domain_translate(struct irq_domain *d,
struct irq_fwspec *fwspec,
unsigned long *hwirq,
unsigned int *type)
{
if (is_of_node(fwspec->fwnode) || is_acpi_device_node(fwspec->fwnode)) {
if (fwspec->param_count != 2)
return -EINVAL;
if ((fwspec->param[0] > MAXIMUM_IRQ_PIN_NUM) ||
(fwspec->param[0] < RESERVED_IRQ_PER_MBIGEN_CHIP))
return -EINVAL;
else
*hwirq = fwspec->param[0];
/* If there is no valid irq type, just use the default type */
if ((fwspec->param[1] == IRQ_TYPE_EDGE_RISING) ||
(fwspec->param[1] == IRQ_TYPE_LEVEL_HIGH))
*type = fwspec->param[1];
else
return -EINVAL;
return 0;
}
return -EINVAL;
}
static int mbigen_irq_domain_alloc(struct irq_domain *domain,
unsigned int virq,
unsigned int nr_irqs,
void *args)
{
struct irq_fwspec *fwspec = args;
irq_hw_number_t hwirq;
unsigned int type;
struct mbigen_device *mgn_chip;
int i, err;
err = mbigen_domain_translate(domain, fwspec, &hwirq, &type);
if (err)
return err;
err = platform_msi_domain_alloc(domain, virq, nr_irqs);
if (err)
return err;
mgn_chip = platform_msi_get_host_data(domain);
for (i = 0; i < nr_irqs; i++)
irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
&mbigen_irq_chip, mgn_chip->base);
return 0;
}
static const struct irq_domain_ops mbigen_domain_ops = {
.translate = mbigen_domain_translate,
.alloc = mbigen_irq_domain_alloc,
.free = irq_domain_free_irqs_common,
};
static int mbigen_of_create_domain(struct platform_device *pdev,
struct mbigen_device *mgn_chip)
{
struct device *parent;
struct platform_device *child;
struct irq_domain *domain;
struct device_node *np;
u32 num_pins;
for_each_child_of_node(pdev->dev.of_node, np) {
if (!of_property_read_bool(np, "interrupt-controller"))
continue;
parent = platform_bus_type.dev_root;
child = of_platform_device_create(np, NULL, parent);
if (!child) {
of_node_put(np);
return -ENOMEM;
}
if (of_property_read_u32(child->dev.of_node, "num-pins",
&num_pins) < 0) {
dev_err(&pdev->dev, "No num-pins property\n");
of_node_put(np);
return -EINVAL;
}
domain = platform_msi_create_device_domain(&child->dev, num_pins,
mbigen_write_msg,
&mbigen_domain_ops,
mgn_chip);
if (!domain) {
of_node_put(np);
return -ENOMEM;
}
}
return 0;
}
#ifdef CONFIG_ACPI
static int mbigen_acpi_create_domain(struct platform_device *pdev,
struct mbigen_device *mgn_chip)
{
struct irq_domain *domain;
u32 num_pins = 0;
int ret;
/*
* "num-pins" is the total number of interrupt pins implemented in
* this mbigen instance, and mbigen is an interrupt controller
* connected to ITS converting wired interrupts into MSI, so we
* use "num-pins" to alloc MSI vectors which are needed by client
* devices connected to it.
*
* Here is the DSDT device node used for mbigen in firmware:
* Device(MBI0) {
* Name(_HID, "HISI0152")
* Name(_UID, Zero)
* Name(_CRS, ResourceTemplate() {
* Memory32Fixed(ReadWrite, 0xa0080000, 0x10000)
* })
*
* Name(_DSD, Package () {
* ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
* Package () {
* Package () {"num-pins", 378}
* }
* })
* }
*/
ret = device_property_read_u32(&pdev->dev, "num-pins", &num_pins);
if (ret || num_pins == 0)
return -EINVAL;
domain = platform_msi_create_device_domain(&pdev->dev, num_pins,
mbigen_write_msg,
&mbigen_domain_ops,
mgn_chip);
if (!domain)
return -ENOMEM;
return 0;
}
#else
static inline int mbigen_acpi_create_domain(struct platform_device *pdev,
struct mbigen_device *mgn_chip)
{
return -ENODEV;
}
#endif
static int mbigen_device_probe(struct platform_device *pdev)
{
struct mbigen_device *mgn_chip;
struct resource *res;
int err;
mgn_chip = devm_kzalloc(&pdev->dev, sizeof(*mgn_chip), GFP_KERNEL);
if (!mgn_chip)
return -ENOMEM;
mgn_chip->pdev = pdev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -EINVAL;
mgn_chip->base = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
if (!mgn_chip->base) {
dev_err(&pdev->dev, "failed to ioremap %pR\n", res);
return -ENOMEM;
}
if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node)
err = mbigen_of_create_domain(pdev, mgn_chip);
else if (ACPI_COMPANION(&pdev->dev))
err = mbigen_acpi_create_domain(pdev, mgn_chip);
else
err = -EINVAL;
if (err) {
dev_err(&pdev->dev, "Failed to create mbi-gen irqdomain\n");
return err;
}
platform_set_drvdata(pdev, mgn_chip);
return 0;
}
static const struct of_device_id mbigen_of_match[] = {
{ .compatible = "hisilicon,mbigen-v2" },
{ /* END */ }
};
MODULE_DEVICE_TABLE(of, mbigen_of_match);
static const struct acpi_device_id mbigen_acpi_match[] = {
{ "HISI0152", 0 },
{}
};
MODULE_DEVICE_TABLE(acpi, mbigen_acpi_match);
static struct platform_driver mbigen_platform_driver = {
.driver = {
.name = "Hisilicon MBIGEN-V2",
.of_match_table = mbigen_of_match,
.acpi_match_table = ACPI_PTR(mbigen_acpi_match),
.suppress_bind_attrs = true,
},
.probe = mbigen_device_probe,
};
module_platform_driver(mbigen_platform_driver);
MODULE_AUTHOR("Jun Ma <majun258@huawei.com>");
MODULE_AUTHOR("Yun Wu <wuyun.wu@huawei.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Hisilicon MBI Generator driver");