mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 13:55:32 +00:00
![NeilBrown](/assets/img/avatar_default.png)
It is only safe to choose not to write to a bad block if that bad block is safely recorded in metadata - i.e. if it has been 'acknowledged'. If it hasn't we need to wait for the acknowledgement. We support that using rdev->blocked wait and md_wait_for_blocked_rdev by introducing a new device flag 'BlockedBadBlock'. This flag is only advisory. It is cleared whenever we acknowledge a bad block, so that a waiter can re-check the particular bad blocks that it is interested it. It should be set by a caller when they find they need to wait. This (set after test) is inherently racy, but as md_wait_for_blocked_rdev already has a timeout, losing the race will have minimal impact. When we clear "Blocked" was also clear "BlockedBadBlocks" incase it was set incorrectly (see above race). We also modify the way we manage 'Blocked' to fit better with the new handling of 'BlockedBadBlocks' and to make it consistent between externally managed and internally managed metadata. This requires that each raidXd loop checks if the metadata needs to be written and triggers a write (md_check_recovery) if needed. Otherwise a queued write request might cause raidXd to wait for the metadata to write, and only that thread can write it. Before writing metadata, we set FaultRecorded for all devices that are Faulty, then after writing the metadata we clear Blocked for any device for which the Fault was certainly Recorded. The 'faulty' device flag now appears in sysfs if the device is faulty *or* it has unacknowledged bad blocks. So user-space which does not understand bad blocks can continue to function correctly. User space which does, should not assume a device is faulty until it sees the 'faulty' flag, and then sees the list of unacknowledged bad blocks is empty. Signed-off-by: NeilBrown <neilb@suse.de>
2477 lines
64 KiB
C
2477 lines
64 KiB
C
/*
|
|
* raid1.c : Multiple Devices driver for Linux
|
|
*
|
|
* Copyright (C) 1999, 2000, 2001 Ingo Molnar, Red Hat
|
|
*
|
|
* Copyright (C) 1996, 1997, 1998 Ingo Molnar, Miguel de Icaza, Gadi Oxman
|
|
*
|
|
* RAID-1 management functions.
|
|
*
|
|
* Better read-balancing code written by Mika Kuoppala <miku@iki.fi>, 2000
|
|
*
|
|
* Fixes to reconstruction by Jakob Østergaard" <jakob@ostenfeld.dk>
|
|
* Various fixes by Neil Brown <neilb@cse.unsw.edu.au>
|
|
*
|
|
* Changes by Peter T. Breuer <ptb@it.uc3m.es> 31/1/2003 to support
|
|
* bitmapped intelligence in resync:
|
|
*
|
|
* - bitmap marked during normal i/o
|
|
* - bitmap used to skip nondirty blocks during sync
|
|
*
|
|
* Additions to bitmap code, (C) 2003-2004 Paul Clements, SteelEye Technology:
|
|
* - persistent bitmap code
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* (for example /usr/src/linux/COPYING); if not, write to the Free
|
|
* Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/ratelimit.h>
|
|
#include "md.h"
|
|
#include "raid1.h"
|
|
#include "bitmap.h"
|
|
|
|
#define DEBUG 0
|
|
#define PRINTK(x...) do { if (DEBUG) printk(x); } while (0)
|
|
|
|
/*
|
|
* Number of guaranteed r1bios in case of extreme VM load:
|
|
*/
|
|
#define NR_RAID1_BIOS 256
|
|
|
|
|
|
static void allow_barrier(conf_t *conf);
|
|
static void lower_barrier(conf_t *conf);
|
|
|
|
static void * r1bio_pool_alloc(gfp_t gfp_flags, void *data)
|
|
{
|
|
struct pool_info *pi = data;
|
|
int size = offsetof(r1bio_t, bios[pi->raid_disks]);
|
|
|
|
/* allocate a r1bio with room for raid_disks entries in the bios array */
|
|
return kzalloc(size, gfp_flags);
|
|
}
|
|
|
|
static void r1bio_pool_free(void *r1_bio, void *data)
|
|
{
|
|
kfree(r1_bio);
|
|
}
|
|
|
|
#define RESYNC_BLOCK_SIZE (64*1024)
|
|
//#define RESYNC_BLOCK_SIZE PAGE_SIZE
|
|
#define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9)
|
|
#define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
|
|
#define RESYNC_WINDOW (2048*1024)
|
|
|
|
static void * r1buf_pool_alloc(gfp_t gfp_flags, void *data)
|
|
{
|
|
struct pool_info *pi = data;
|
|
struct page *page;
|
|
r1bio_t *r1_bio;
|
|
struct bio *bio;
|
|
int i, j;
|
|
|
|
r1_bio = r1bio_pool_alloc(gfp_flags, pi);
|
|
if (!r1_bio)
|
|
return NULL;
|
|
|
|
/*
|
|
* Allocate bios : 1 for reading, n-1 for writing
|
|
*/
|
|
for (j = pi->raid_disks ; j-- ; ) {
|
|
bio = bio_kmalloc(gfp_flags, RESYNC_PAGES);
|
|
if (!bio)
|
|
goto out_free_bio;
|
|
r1_bio->bios[j] = bio;
|
|
}
|
|
/*
|
|
* Allocate RESYNC_PAGES data pages and attach them to
|
|
* the first bio.
|
|
* If this is a user-requested check/repair, allocate
|
|
* RESYNC_PAGES for each bio.
|
|
*/
|
|
if (test_bit(MD_RECOVERY_REQUESTED, &pi->mddev->recovery))
|
|
j = pi->raid_disks;
|
|
else
|
|
j = 1;
|
|
while(j--) {
|
|
bio = r1_bio->bios[j];
|
|
for (i = 0; i < RESYNC_PAGES; i++) {
|
|
page = alloc_page(gfp_flags);
|
|
if (unlikely(!page))
|
|
goto out_free_pages;
|
|
|
|
bio->bi_io_vec[i].bv_page = page;
|
|
bio->bi_vcnt = i+1;
|
|
}
|
|
}
|
|
/* If not user-requests, copy the page pointers to all bios */
|
|
if (!test_bit(MD_RECOVERY_REQUESTED, &pi->mddev->recovery)) {
|
|
for (i=0; i<RESYNC_PAGES ; i++)
|
|
for (j=1; j<pi->raid_disks; j++)
|
|
r1_bio->bios[j]->bi_io_vec[i].bv_page =
|
|
r1_bio->bios[0]->bi_io_vec[i].bv_page;
|
|
}
|
|
|
|
r1_bio->master_bio = NULL;
|
|
|
|
return r1_bio;
|
|
|
|
out_free_pages:
|
|
for (j=0 ; j < pi->raid_disks; j++)
|
|
for (i=0; i < r1_bio->bios[j]->bi_vcnt ; i++)
|
|
put_page(r1_bio->bios[j]->bi_io_vec[i].bv_page);
|
|
j = -1;
|
|
out_free_bio:
|
|
while ( ++j < pi->raid_disks )
|
|
bio_put(r1_bio->bios[j]);
|
|
r1bio_pool_free(r1_bio, data);
|
|
return NULL;
|
|
}
|
|
|
|
static void r1buf_pool_free(void *__r1_bio, void *data)
|
|
{
|
|
struct pool_info *pi = data;
|
|
int i,j;
|
|
r1bio_t *r1bio = __r1_bio;
|
|
|
|
for (i = 0; i < RESYNC_PAGES; i++)
|
|
for (j = pi->raid_disks; j-- ;) {
|
|
if (j == 0 ||
|
|
r1bio->bios[j]->bi_io_vec[i].bv_page !=
|
|
r1bio->bios[0]->bi_io_vec[i].bv_page)
|
|
safe_put_page(r1bio->bios[j]->bi_io_vec[i].bv_page);
|
|
}
|
|
for (i=0 ; i < pi->raid_disks; i++)
|
|
bio_put(r1bio->bios[i]);
|
|
|
|
r1bio_pool_free(r1bio, data);
|
|
}
|
|
|
|
static void put_all_bios(conf_t *conf, r1bio_t *r1_bio)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < conf->raid_disks; i++) {
|
|
struct bio **bio = r1_bio->bios + i;
|
|
if (*bio && *bio != IO_BLOCKED)
|
|
bio_put(*bio);
|
|
*bio = NULL;
|
|
}
|
|
}
|
|
|
|
static void free_r1bio(r1bio_t *r1_bio)
|
|
{
|
|
conf_t *conf = r1_bio->mddev->private;
|
|
|
|
put_all_bios(conf, r1_bio);
|
|
mempool_free(r1_bio, conf->r1bio_pool);
|
|
}
|
|
|
|
static void put_buf(r1bio_t *r1_bio)
|
|
{
|
|
conf_t *conf = r1_bio->mddev->private;
|
|
int i;
|
|
|
|
for (i=0; i<conf->raid_disks; i++) {
|
|
struct bio *bio = r1_bio->bios[i];
|
|
if (bio->bi_end_io)
|
|
rdev_dec_pending(conf->mirrors[i].rdev, r1_bio->mddev);
|
|
}
|
|
|
|
mempool_free(r1_bio, conf->r1buf_pool);
|
|
|
|
lower_barrier(conf);
|
|
}
|
|
|
|
static void reschedule_retry(r1bio_t *r1_bio)
|
|
{
|
|
unsigned long flags;
|
|
mddev_t *mddev = r1_bio->mddev;
|
|
conf_t *conf = mddev->private;
|
|
|
|
spin_lock_irqsave(&conf->device_lock, flags);
|
|
list_add(&r1_bio->retry_list, &conf->retry_list);
|
|
conf->nr_queued ++;
|
|
spin_unlock_irqrestore(&conf->device_lock, flags);
|
|
|
|
wake_up(&conf->wait_barrier);
|
|
md_wakeup_thread(mddev->thread);
|
|
}
|
|
|
|
/*
|
|
* raid_end_bio_io() is called when we have finished servicing a mirrored
|
|
* operation and are ready to return a success/failure code to the buffer
|
|
* cache layer.
|
|
*/
|
|
static void call_bio_endio(r1bio_t *r1_bio)
|
|
{
|
|
struct bio *bio = r1_bio->master_bio;
|
|
int done;
|
|
conf_t *conf = r1_bio->mddev->private;
|
|
|
|
if (bio->bi_phys_segments) {
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&conf->device_lock, flags);
|
|
bio->bi_phys_segments--;
|
|
done = (bio->bi_phys_segments == 0);
|
|
spin_unlock_irqrestore(&conf->device_lock, flags);
|
|
} else
|
|
done = 1;
|
|
|
|
if (!test_bit(R1BIO_Uptodate, &r1_bio->state))
|
|
clear_bit(BIO_UPTODATE, &bio->bi_flags);
|
|
if (done) {
|
|
bio_endio(bio, 0);
|
|
/*
|
|
* Wake up any possible resync thread that waits for the device
|
|
* to go idle.
|
|
*/
|
|
allow_barrier(conf);
|
|
}
|
|
}
|
|
|
|
static void raid_end_bio_io(r1bio_t *r1_bio)
|
|
{
|
|
struct bio *bio = r1_bio->master_bio;
|
|
|
|
/* if nobody has done the final endio yet, do it now */
|
|
if (!test_and_set_bit(R1BIO_Returned, &r1_bio->state)) {
|
|
PRINTK(KERN_DEBUG "raid1: sync end %s on sectors %llu-%llu\n",
|
|
(bio_data_dir(bio) == WRITE) ? "write" : "read",
|
|
(unsigned long long) bio->bi_sector,
|
|
(unsigned long long) bio->bi_sector +
|
|
(bio->bi_size >> 9) - 1);
|
|
|
|
call_bio_endio(r1_bio);
|
|
}
|
|
free_r1bio(r1_bio);
|
|
}
|
|
|
|
/*
|
|
* Update disk head position estimator based on IRQ completion info.
|
|
*/
|
|
static inline void update_head_pos(int disk, r1bio_t *r1_bio)
|
|
{
|
|
conf_t *conf = r1_bio->mddev->private;
|
|
|
|
conf->mirrors[disk].head_position =
|
|
r1_bio->sector + (r1_bio->sectors);
|
|
}
|
|
|
|
static void raid1_end_read_request(struct bio *bio, int error)
|
|
{
|
|
int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
|
|
r1bio_t *r1_bio = bio->bi_private;
|
|
int mirror;
|
|
conf_t *conf = r1_bio->mddev->private;
|
|
|
|
mirror = r1_bio->read_disk;
|
|
/*
|
|
* this branch is our 'one mirror IO has finished' event handler:
|
|
*/
|
|
update_head_pos(mirror, r1_bio);
|
|
|
|
if (uptodate)
|
|
set_bit(R1BIO_Uptodate, &r1_bio->state);
|
|
else {
|
|
/* If all other devices have failed, we want to return
|
|
* the error upwards rather than fail the last device.
|
|
* Here we redefine "uptodate" to mean "Don't want to retry"
|
|
*/
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&conf->device_lock, flags);
|
|
if (r1_bio->mddev->degraded == conf->raid_disks ||
|
|
(r1_bio->mddev->degraded == conf->raid_disks-1 &&
|
|
!test_bit(Faulty, &conf->mirrors[mirror].rdev->flags)))
|
|
uptodate = 1;
|
|
spin_unlock_irqrestore(&conf->device_lock, flags);
|
|
}
|
|
|
|
if (uptodate)
|
|
raid_end_bio_io(r1_bio);
|
|
else {
|
|
/*
|
|
* oops, read error:
|
|
*/
|
|
char b[BDEVNAME_SIZE];
|
|
printk_ratelimited(
|
|
KERN_ERR "md/raid1:%s: %s: "
|
|
"rescheduling sector %llu\n",
|
|
mdname(conf->mddev),
|
|
bdevname(conf->mirrors[mirror].rdev->bdev,
|
|
b),
|
|
(unsigned long long)r1_bio->sector);
|
|
set_bit(R1BIO_ReadError, &r1_bio->state);
|
|
reschedule_retry(r1_bio);
|
|
}
|
|
|
|
rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
|
|
}
|
|
|
|
static void r1_bio_write_done(r1bio_t *r1_bio)
|
|
{
|
|
if (atomic_dec_and_test(&r1_bio->remaining))
|
|
{
|
|
/* it really is the end of this request */
|
|
if (test_bit(R1BIO_BehindIO, &r1_bio->state)) {
|
|
/* free extra copy of the data pages */
|
|
int i = r1_bio->behind_page_count;
|
|
while (i--)
|
|
safe_put_page(r1_bio->behind_pages[i]);
|
|
kfree(r1_bio->behind_pages);
|
|
r1_bio->behind_pages = NULL;
|
|
}
|
|
/* clear the bitmap if all writes complete successfully */
|
|
bitmap_endwrite(r1_bio->mddev->bitmap, r1_bio->sector,
|
|
r1_bio->sectors,
|
|
!test_bit(R1BIO_Degraded, &r1_bio->state),
|
|
test_bit(R1BIO_BehindIO, &r1_bio->state));
|
|
md_write_end(r1_bio->mddev);
|
|
raid_end_bio_io(r1_bio);
|
|
}
|
|
}
|
|
|
|
static void raid1_end_write_request(struct bio *bio, int error)
|
|
{
|
|
int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
|
|
r1bio_t *r1_bio = bio->bi_private;
|
|
int mirror, behind = test_bit(R1BIO_BehindIO, &r1_bio->state);
|
|
conf_t *conf = r1_bio->mddev->private;
|
|
struct bio *to_put = NULL;
|
|
|
|
|
|
for (mirror = 0; mirror < conf->raid_disks; mirror++)
|
|
if (r1_bio->bios[mirror] == bio)
|
|
break;
|
|
|
|
/*
|
|
* 'one mirror IO has finished' event handler:
|
|
*/
|
|
r1_bio->bios[mirror] = NULL;
|
|
to_put = bio;
|
|
if (!uptodate) {
|
|
md_error(r1_bio->mddev, conf->mirrors[mirror].rdev);
|
|
/* an I/O failed, we can't clear the bitmap */
|
|
set_bit(R1BIO_Degraded, &r1_bio->state);
|
|
} else
|
|
/*
|
|
* Set R1BIO_Uptodate in our master bio, so that we
|
|
* will return a good error code for to the higher
|
|
* levels even if IO on some other mirrored buffer
|
|
* fails.
|
|
*
|
|
* The 'master' represents the composite IO operation
|
|
* to user-side. So if something waits for IO, then it
|
|
* will wait for the 'master' bio.
|
|
*/
|
|
set_bit(R1BIO_Uptodate, &r1_bio->state);
|
|
|
|
update_head_pos(mirror, r1_bio);
|
|
|
|
if (behind) {
|
|
if (test_bit(WriteMostly, &conf->mirrors[mirror].rdev->flags))
|
|
atomic_dec(&r1_bio->behind_remaining);
|
|
|
|
/*
|
|
* In behind mode, we ACK the master bio once the I/O
|
|
* has safely reached all non-writemostly
|
|
* disks. Setting the Returned bit ensures that this
|
|
* gets done only once -- we don't ever want to return
|
|
* -EIO here, instead we'll wait
|
|
*/
|
|
if (atomic_read(&r1_bio->behind_remaining) >= (atomic_read(&r1_bio->remaining)-1) &&
|
|
test_bit(R1BIO_Uptodate, &r1_bio->state)) {
|
|
/* Maybe we can return now */
|
|
if (!test_and_set_bit(R1BIO_Returned, &r1_bio->state)) {
|
|
struct bio *mbio = r1_bio->master_bio;
|
|
PRINTK(KERN_DEBUG "raid1: behind end write sectors %llu-%llu\n",
|
|
(unsigned long long) mbio->bi_sector,
|
|
(unsigned long long) mbio->bi_sector +
|
|
(mbio->bi_size >> 9) - 1);
|
|
call_bio_endio(r1_bio);
|
|
}
|
|
}
|
|
}
|
|
rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
|
|
|
|
/*
|
|
* Let's see if all mirrored write operations have finished
|
|
* already.
|
|
*/
|
|
r1_bio_write_done(r1_bio);
|
|
|
|
if (to_put)
|
|
bio_put(to_put);
|
|
}
|
|
|
|
|
|
/*
|
|
* This routine returns the disk from which the requested read should
|
|
* be done. There is a per-array 'next expected sequential IO' sector
|
|
* number - if this matches on the next IO then we use the last disk.
|
|
* There is also a per-disk 'last know head position' sector that is
|
|
* maintained from IRQ contexts, both the normal and the resync IO
|
|
* completion handlers update this position correctly. If there is no
|
|
* perfect sequential match then we pick the disk whose head is closest.
|
|
*
|
|
* If there are 2 mirrors in the same 2 devices, performance degrades
|
|
* because position is mirror, not device based.
|
|
*
|
|
* The rdev for the device selected will have nr_pending incremented.
|
|
*/
|
|
static int read_balance(conf_t *conf, r1bio_t *r1_bio, int *max_sectors)
|
|
{
|
|
const sector_t this_sector = r1_bio->sector;
|
|
int sectors;
|
|
int best_good_sectors;
|
|
int start_disk;
|
|
int best_disk;
|
|
int i;
|
|
sector_t best_dist;
|
|
mdk_rdev_t *rdev;
|
|
int choose_first;
|
|
|
|
rcu_read_lock();
|
|
/*
|
|
* Check if we can balance. We can balance on the whole
|
|
* device if no resync is going on, or below the resync window.
|
|
* We take the first readable disk when above the resync window.
|
|
*/
|
|
retry:
|
|
sectors = r1_bio->sectors;
|
|
best_disk = -1;
|
|
best_dist = MaxSector;
|
|
best_good_sectors = 0;
|
|
|
|
if (conf->mddev->recovery_cp < MaxSector &&
|
|
(this_sector + sectors >= conf->next_resync)) {
|
|
choose_first = 1;
|
|
start_disk = 0;
|
|
} else {
|
|
choose_first = 0;
|
|
start_disk = conf->last_used;
|
|
}
|
|
|
|
for (i = 0 ; i < conf->raid_disks ; i++) {
|
|
sector_t dist;
|
|
sector_t first_bad;
|
|
int bad_sectors;
|
|
|
|
int disk = start_disk + i;
|
|
if (disk >= conf->raid_disks)
|
|
disk -= conf->raid_disks;
|
|
|
|
rdev = rcu_dereference(conf->mirrors[disk].rdev);
|
|
if (r1_bio->bios[disk] == IO_BLOCKED
|
|
|| rdev == NULL
|
|
|| test_bit(Faulty, &rdev->flags))
|
|
continue;
|
|
if (!test_bit(In_sync, &rdev->flags) &&
|
|
rdev->recovery_offset < this_sector + sectors)
|
|
continue;
|
|
if (test_bit(WriteMostly, &rdev->flags)) {
|
|
/* Don't balance among write-mostly, just
|
|
* use the first as a last resort */
|
|
if (best_disk < 0)
|
|
best_disk = disk;
|
|
continue;
|
|
}
|
|
/* This is a reasonable device to use. It might
|
|
* even be best.
|
|
*/
|
|
if (is_badblock(rdev, this_sector, sectors,
|
|
&first_bad, &bad_sectors)) {
|
|
if (best_dist < MaxSector)
|
|
/* already have a better device */
|
|
continue;
|
|
if (first_bad <= this_sector) {
|
|
/* cannot read here. If this is the 'primary'
|
|
* device, then we must not read beyond
|
|
* bad_sectors from another device..
|
|
*/
|
|
bad_sectors -= (this_sector - first_bad);
|
|
if (choose_first && sectors > bad_sectors)
|
|
sectors = bad_sectors;
|
|
if (best_good_sectors > sectors)
|
|
best_good_sectors = sectors;
|
|
|
|
} else {
|
|
sector_t good_sectors = first_bad - this_sector;
|
|
if (good_sectors > best_good_sectors) {
|
|
best_good_sectors = good_sectors;
|
|
best_disk = disk;
|
|
}
|
|
if (choose_first)
|
|
break;
|
|
}
|
|
continue;
|
|
} else
|
|
best_good_sectors = sectors;
|
|
|
|
dist = abs(this_sector - conf->mirrors[disk].head_position);
|
|
if (choose_first
|
|
/* Don't change to another disk for sequential reads */
|
|
|| conf->next_seq_sect == this_sector
|
|
|| dist == 0
|
|
/* If device is idle, use it */
|
|
|| atomic_read(&rdev->nr_pending) == 0) {
|
|
best_disk = disk;
|
|
break;
|
|
}
|
|
if (dist < best_dist) {
|
|
best_dist = dist;
|
|
best_disk = disk;
|
|
}
|
|
}
|
|
|
|
if (best_disk >= 0) {
|
|
rdev = rcu_dereference(conf->mirrors[best_disk].rdev);
|
|
if (!rdev)
|
|
goto retry;
|
|
atomic_inc(&rdev->nr_pending);
|
|
if (test_bit(Faulty, &rdev->flags)) {
|
|
/* cannot risk returning a device that failed
|
|
* before we inc'ed nr_pending
|
|
*/
|
|
rdev_dec_pending(rdev, conf->mddev);
|
|
goto retry;
|
|
}
|
|
sectors = best_good_sectors;
|
|
conf->next_seq_sect = this_sector + sectors;
|
|
conf->last_used = best_disk;
|
|
}
|
|
rcu_read_unlock();
|
|
*max_sectors = sectors;
|
|
|
|
return best_disk;
|
|
}
|
|
|
|
int md_raid1_congested(mddev_t *mddev, int bits)
|
|
{
|
|
conf_t *conf = mddev->private;
|
|
int i, ret = 0;
|
|
|
|
rcu_read_lock();
|
|
for (i = 0; i < mddev->raid_disks; i++) {
|
|
mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
|
|
if (rdev && !test_bit(Faulty, &rdev->flags)) {
|
|
struct request_queue *q = bdev_get_queue(rdev->bdev);
|
|
|
|
BUG_ON(!q);
|
|
|
|
/* Note the '|| 1' - when read_balance prefers
|
|
* non-congested targets, it can be removed
|
|
*/
|
|
if ((bits & (1<<BDI_async_congested)) || 1)
|
|
ret |= bdi_congested(&q->backing_dev_info, bits);
|
|
else
|
|
ret &= bdi_congested(&q->backing_dev_info, bits);
|
|
}
|
|
}
|
|
rcu_read_unlock();
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(md_raid1_congested);
|
|
|
|
static int raid1_congested(void *data, int bits)
|
|
{
|
|
mddev_t *mddev = data;
|
|
|
|
return mddev_congested(mddev, bits) ||
|
|
md_raid1_congested(mddev, bits);
|
|
}
|
|
|
|
static void flush_pending_writes(conf_t *conf)
|
|
{
|
|
/* Any writes that have been queued but are awaiting
|
|
* bitmap updates get flushed here.
|
|
*/
|
|
spin_lock_irq(&conf->device_lock);
|
|
|
|
if (conf->pending_bio_list.head) {
|
|
struct bio *bio;
|
|
bio = bio_list_get(&conf->pending_bio_list);
|
|
spin_unlock_irq(&conf->device_lock);
|
|
/* flush any pending bitmap writes to
|
|
* disk before proceeding w/ I/O */
|
|
bitmap_unplug(conf->mddev->bitmap);
|
|
|
|
while (bio) { /* submit pending writes */
|
|
struct bio *next = bio->bi_next;
|
|
bio->bi_next = NULL;
|
|
generic_make_request(bio);
|
|
bio = next;
|
|
}
|
|
} else
|
|
spin_unlock_irq(&conf->device_lock);
|
|
}
|
|
|
|
/* Barriers....
|
|
* Sometimes we need to suspend IO while we do something else,
|
|
* either some resync/recovery, or reconfigure the array.
|
|
* To do this we raise a 'barrier'.
|
|
* The 'barrier' is a counter that can be raised multiple times
|
|
* to count how many activities are happening which preclude
|
|
* normal IO.
|
|
* We can only raise the barrier if there is no pending IO.
|
|
* i.e. if nr_pending == 0.
|
|
* We choose only to raise the barrier if no-one is waiting for the
|
|
* barrier to go down. This means that as soon as an IO request
|
|
* is ready, no other operations which require a barrier will start
|
|
* until the IO request has had a chance.
|
|
*
|
|
* So: regular IO calls 'wait_barrier'. When that returns there
|
|
* is no backgroup IO happening, It must arrange to call
|
|
* allow_barrier when it has finished its IO.
|
|
* backgroup IO calls must call raise_barrier. Once that returns
|
|
* there is no normal IO happeing. It must arrange to call
|
|
* lower_barrier when the particular background IO completes.
|
|
*/
|
|
#define RESYNC_DEPTH 32
|
|
|
|
static void raise_barrier(conf_t *conf)
|
|
{
|
|
spin_lock_irq(&conf->resync_lock);
|
|
|
|
/* Wait until no block IO is waiting */
|
|
wait_event_lock_irq(conf->wait_barrier, !conf->nr_waiting,
|
|
conf->resync_lock, );
|
|
|
|
/* block any new IO from starting */
|
|
conf->barrier++;
|
|
|
|
/* Now wait for all pending IO to complete */
|
|
wait_event_lock_irq(conf->wait_barrier,
|
|
!conf->nr_pending && conf->barrier < RESYNC_DEPTH,
|
|
conf->resync_lock, );
|
|
|
|
spin_unlock_irq(&conf->resync_lock);
|
|
}
|
|
|
|
static void lower_barrier(conf_t *conf)
|
|
{
|
|
unsigned long flags;
|
|
BUG_ON(conf->barrier <= 0);
|
|
spin_lock_irqsave(&conf->resync_lock, flags);
|
|
conf->barrier--;
|
|
spin_unlock_irqrestore(&conf->resync_lock, flags);
|
|
wake_up(&conf->wait_barrier);
|
|
}
|
|
|
|
static void wait_barrier(conf_t *conf)
|
|
{
|
|
spin_lock_irq(&conf->resync_lock);
|
|
if (conf->barrier) {
|
|
conf->nr_waiting++;
|
|
wait_event_lock_irq(conf->wait_barrier, !conf->barrier,
|
|
conf->resync_lock,
|
|
);
|
|
conf->nr_waiting--;
|
|
}
|
|
conf->nr_pending++;
|
|
spin_unlock_irq(&conf->resync_lock);
|
|
}
|
|
|
|
static void allow_barrier(conf_t *conf)
|
|
{
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&conf->resync_lock, flags);
|
|
conf->nr_pending--;
|
|
spin_unlock_irqrestore(&conf->resync_lock, flags);
|
|
wake_up(&conf->wait_barrier);
|
|
}
|
|
|
|
static void freeze_array(conf_t *conf)
|
|
{
|
|
/* stop syncio and normal IO and wait for everything to
|
|
* go quite.
|
|
* We increment barrier and nr_waiting, and then
|
|
* wait until nr_pending match nr_queued+1
|
|
* This is called in the context of one normal IO request
|
|
* that has failed. Thus any sync request that might be pending
|
|
* will be blocked by nr_pending, and we need to wait for
|
|
* pending IO requests to complete or be queued for re-try.
|
|
* Thus the number queued (nr_queued) plus this request (1)
|
|
* must match the number of pending IOs (nr_pending) before
|
|
* we continue.
|
|
*/
|
|
spin_lock_irq(&conf->resync_lock);
|
|
conf->barrier++;
|
|
conf->nr_waiting++;
|
|
wait_event_lock_irq(conf->wait_barrier,
|
|
conf->nr_pending == conf->nr_queued+1,
|
|
conf->resync_lock,
|
|
flush_pending_writes(conf));
|
|
spin_unlock_irq(&conf->resync_lock);
|
|
}
|
|
static void unfreeze_array(conf_t *conf)
|
|
{
|
|
/* reverse the effect of the freeze */
|
|
spin_lock_irq(&conf->resync_lock);
|
|
conf->barrier--;
|
|
conf->nr_waiting--;
|
|
wake_up(&conf->wait_barrier);
|
|
spin_unlock_irq(&conf->resync_lock);
|
|
}
|
|
|
|
|
|
/* duplicate the data pages for behind I/O
|
|
*/
|
|
static void alloc_behind_pages(struct bio *bio, r1bio_t *r1_bio)
|
|
{
|
|
int i;
|
|
struct bio_vec *bvec;
|
|
struct page **pages = kzalloc(bio->bi_vcnt * sizeof(struct page*),
|
|
GFP_NOIO);
|
|
if (unlikely(!pages))
|
|
return;
|
|
|
|
bio_for_each_segment(bvec, bio, i) {
|
|
pages[i] = alloc_page(GFP_NOIO);
|
|
if (unlikely(!pages[i]))
|
|
goto do_sync_io;
|
|
memcpy(kmap(pages[i]) + bvec->bv_offset,
|
|
kmap(bvec->bv_page) + bvec->bv_offset, bvec->bv_len);
|
|
kunmap(pages[i]);
|
|
kunmap(bvec->bv_page);
|
|
}
|
|
r1_bio->behind_pages = pages;
|
|
r1_bio->behind_page_count = bio->bi_vcnt;
|
|
set_bit(R1BIO_BehindIO, &r1_bio->state);
|
|
return;
|
|
|
|
do_sync_io:
|
|
for (i = 0; i < bio->bi_vcnt; i++)
|
|
if (pages[i])
|
|
put_page(pages[i]);
|
|
kfree(pages);
|
|
PRINTK("%dB behind alloc failed, doing sync I/O\n", bio->bi_size);
|
|
}
|
|
|
|
static int make_request(mddev_t *mddev, struct bio * bio)
|
|
{
|
|
conf_t *conf = mddev->private;
|
|
mirror_info_t *mirror;
|
|
r1bio_t *r1_bio;
|
|
struct bio *read_bio;
|
|
int i, targets = 0, disks;
|
|
struct bitmap *bitmap;
|
|
unsigned long flags;
|
|
const int rw = bio_data_dir(bio);
|
|
const unsigned long do_sync = (bio->bi_rw & REQ_SYNC);
|
|
const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA));
|
|
mdk_rdev_t *blocked_rdev;
|
|
int plugged;
|
|
|
|
/*
|
|
* Register the new request and wait if the reconstruction
|
|
* thread has put up a bar for new requests.
|
|
* Continue immediately if no resync is active currently.
|
|
*/
|
|
|
|
md_write_start(mddev, bio); /* wait on superblock update early */
|
|
|
|
if (bio_data_dir(bio) == WRITE &&
|
|
bio->bi_sector + bio->bi_size/512 > mddev->suspend_lo &&
|
|
bio->bi_sector < mddev->suspend_hi) {
|
|
/* As the suspend_* range is controlled by
|
|
* userspace, we want an interruptible
|
|
* wait.
|
|
*/
|
|
DEFINE_WAIT(w);
|
|
for (;;) {
|
|
flush_signals(current);
|
|
prepare_to_wait(&conf->wait_barrier,
|
|
&w, TASK_INTERRUPTIBLE);
|
|
if (bio->bi_sector + bio->bi_size/512 <= mddev->suspend_lo ||
|
|
bio->bi_sector >= mddev->suspend_hi)
|
|
break;
|
|
schedule();
|
|
}
|
|
finish_wait(&conf->wait_barrier, &w);
|
|
}
|
|
|
|
wait_barrier(conf);
|
|
|
|
bitmap = mddev->bitmap;
|
|
|
|
/*
|
|
* make_request() can abort the operation when READA is being
|
|
* used and no empty request is available.
|
|
*
|
|
*/
|
|
r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO);
|
|
|
|
r1_bio->master_bio = bio;
|
|
r1_bio->sectors = bio->bi_size >> 9;
|
|
r1_bio->state = 0;
|
|
r1_bio->mddev = mddev;
|
|
r1_bio->sector = bio->bi_sector;
|
|
|
|
/* We might need to issue multiple reads to different
|
|
* devices if there are bad blocks around, so we keep
|
|
* track of the number of reads in bio->bi_phys_segments.
|
|
* If this is 0, there is only one r1_bio and no locking
|
|
* will be needed when requests complete. If it is
|
|
* non-zero, then it is the number of not-completed requests.
|
|
*/
|
|
bio->bi_phys_segments = 0;
|
|
clear_bit(BIO_SEG_VALID, &bio->bi_flags);
|
|
|
|
if (rw == READ) {
|
|
/*
|
|
* read balancing logic:
|
|
*/
|
|
int max_sectors;
|
|
int rdisk;
|
|
|
|
read_again:
|
|
rdisk = read_balance(conf, r1_bio, &max_sectors);
|
|
|
|
if (rdisk < 0) {
|
|
/* couldn't find anywhere to read from */
|
|
raid_end_bio_io(r1_bio);
|
|
return 0;
|
|
}
|
|
mirror = conf->mirrors + rdisk;
|
|
|
|
if (test_bit(WriteMostly, &mirror->rdev->flags) &&
|
|
bitmap) {
|
|
/* Reading from a write-mostly device must
|
|
* take care not to over-take any writes
|
|
* that are 'behind'
|
|
*/
|
|
wait_event(bitmap->behind_wait,
|
|
atomic_read(&bitmap->behind_writes) == 0);
|
|
}
|
|
r1_bio->read_disk = rdisk;
|
|
|
|
read_bio = bio_clone_mddev(bio, GFP_NOIO, mddev);
|
|
md_trim_bio(read_bio, r1_bio->sector - bio->bi_sector,
|
|
max_sectors);
|
|
|
|
r1_bio->bios[rdisk] = read_bio;
|
|
|
|
read_bio->bi_sector = r1_bio->sector + mirror->rdev->data_offset;
|
|
read_bio->bi_bdev = mirror->rdev->bdev;
|
|
read_bio->bi_end_io = raid1_end_read_request;
|
|
read_bio->bi_rw = READ | do_sync;
|
|
read_bio->bi_private = r1_bio;
|
|
|
|
if (max_sectors < r1_bio->sectors) {
|
|
/* could not read all from this device, so we will
|
|
* need another r1_bio.
|
|
*/
|
|
int sectors_handled;
|
|
|
|
sectors_handled = (r1_bio->sector + max_sectors
|
|
- bio->bi_sector);
|
|
r1_bio->sectors = max_sectors;
|
|
spin_lock_irq(&conf->device_lock);
|
|
if (bio->bi_phys_segments == 0)
|
|
bio->bi_phys_segments = 2;
|
|
else
|
|
bio->bi_phys_segments++;
|
|
spin_unlock_irq(&conf->device_lock);
|
|
/* Cannot call generic_make_request directly
|
|
* as that will be queued in __make_request
|
|
* and subsequent mempool_alloc might block waiting
|
|
* for it. So hand bio over to raid1d.
|
|
*/
|
|
reschedule_retry(r1_bio);
|
|
|
|
r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO);
|
|
|
|
r1_bio->master_bio = bio;
|
|
r1_bio->sectors = (bio->bi_size >> 9) - sectors_handled;
|
|
r1_bio->state = 0;
|
|
r1_bio->mddev = mddev;
|
|
r1_bio->sector = bio->bi_sector + sectors_handled;
|
|
goto read_again;
|
|
} else
|
|
generic_make_request(read_bio);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* WRITE:
|
|
*/
|
|
/* first select target devices under spinlock and
|
|
* inc refcount on their rdev. Record them by setting
|
|
* bios[x] to bio
|
|
*/
|
|
plugged = mddev_check_plugged(mddev);
|
|
|
|
disks = conf->raid_disks;
|
|
retry_write:
|
|
blocked_rdev = NULL;
|
|
rcu_read_lock();
|
|
for (i = 0; i < disks; i++) {
|
|
mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
|
|
if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
|
|
atomic_inc(&rdev->nr_pending);
|
|
blocked_rdev = rdev;
|
|
break;
|
|
}
|
|
if (rdev && !test_bit(Faulty, &rdev->flags)) {
|
|
atomic_inc(&rdev->nr_pending);
|
|
if (test_bit(Faulty, &rdev->flags)) {
|
|
rdev_dec_pending(rdev, mddev);
|
|
r1_bio->bios[i] = NULL;
|
|
} else {
|
|
r1_bio->bios[i] = bio;
|
|
targets++;
|
|
}
|
|
} else
|
|
r1_bio->bios[i] = NULL;
|
|
}
|
|
rcu_read_unlock();
|
|
|
|
if (unlikely(blocked_rdev)) {
|
|
/* Wait for this device to become unblocked */
|
|
int j;
|
|
|
|
for (j = 0; j < i; j++)
|
|
if (r1_bio->bios[j])
|
|
rdev_dec_pending(conf->mirrors[j].rdev, mddev);
|
|
|
|
allow_barrier(conf);
|
|
md_wait_for_blocked_rdev(blocked_rdev, mddev);
|
|
wait_barrier(conf);
|
|
goto retry_write;
|
|
}
|
|
|
|
if (targets < conf->raid_disks) {
|
|
/* array is degraded, we will not clear the bitmap
|
|
* on I/O completion (see raid1_end_write_request) */
|
|
set_bit(R1BIO_Degraded, &r1_bio->state);
|
|
}
|
|
|
|
/* do behind I/O ?
|
|
* Not if there are too many, or cannot allocate memory,
|
|
* or a reader on WriteMostly is waiting for behind writes
|
|
* to flush */
|
|
if (bitmap &&
|
|
(atomic_read(&bitmap->behind_writes)
|
|
< mddev->bitmap_info.max_write_behind) &&
|
|
!waitqueue_active(&bitmap->behind_wait))
|
|
alloc_behind_pages(bio, r1_bio);
|
|
|
|
atomic_set(&r1_bio->remaining, 1);
|
|
atomic_set(&r1_bio->behind_remaining, 0);
|
|
|
|
bitmap_startwrite(bitmap, bio->bi_sector, r1_bio->sectors,
|
|
test_bit(R1BIO_BehindIO, &r1_bio->state));
|
|
for (i = 0; i < disks; i++) {
|
|
struct bio *mbio;
|
|
if (!r1_bio->bios[i])
|
|
continue;
|
|
|
|
mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
|
|
r1_bio->bios[i] = mbio;
|
|
|
|
mbio->bi_sector = r1_bio->sector + conf->mirrors[i].rdev->data_offset;
|
|
mbio->bi_bdev = conf->mirrors[i].rdev->bdev;
|
|
mbio->bi_end_io = raid1_end_write_request;
|
|
mbio->bi_rw = WRITE | do_flush_fua | do_sync;
|
|
mbio->bi_private = r1_bio;
|
|
|
|
if (r1_bio->behind_pages) {
|
|
struct bio_vec *bvec;
|
|
int j;
|
|
|
|
/* Yes, I really want the '__' version so that
|
|
* we clear any unused pointer in the io_vec, rather
|
|
* than leave them unchanged. This is important
|
|
* because when we come to free the pages, we won't
|
|
* know the original bi_idx, so we just free
|
|
* them all
|
|
*/
|
|
__bio_for_each_segment(bvec, mbio, j, 0)
|
|
bvec->bv_page = r1_bio->behind_pages[j];
|
|
if (test_bit(WriteMostly, &conf->mirrors[i].rdev->flags))
|
|
atomic_inc(&r1_bio->behind_remaining);
|
|
}
|
|
|
|
atomic_inc(&r1_bio->remaining);
|
|
spin_lock_irqsave(&conf->device_lock, flags);
|
|
bio_list_add(&conf->pending_bio_list, mbio);
|
|
spin_unlock_irqrestore(&conf->device_lock, flags);
|
|
}
|
|
r1_bio_write_done(r1_bio);
|
|
|
|
/* In case raid1d snuck in to freeze_array */
|
|
wake_up(&conf->wait_barrier);
|
|
|
|
if (do_sync || !bitmap || !plugged)
|
|
md_wakeup_thread(mddev->thread);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void status(struct seq_file *seq, mddev_t *mddev)
|
|
{
|
|
conf_t *conf = mddev->private;
|
|
int i;
|
|
|
|
seq_printf(seq, " [%d/%d] [", conf->raid_disks,
|
|
conf->raid_disks - mddev->degraded);
|
|
rcu_read_lock();
|
|
for (i = 0; i < conf->raid_disks; i++) {
|
|
mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
|
|
seq_printf(seq, "%s",
|
|
rdev && test_bit(In_sync, &rdev->flags) ? "U" : "_");
|
|
}
|
|
rcu_read_unlock();
|
|
seq_printf(seq, "]");
|
|
}
|
|
|
|
|
|
static void error(mddev_t *mddev, mdk_rdev_t *rdev)
|
|
{
|
|
char b[BDEVNAME_SIZE];
|
|
conf_t *conf = mddev->private;
|
|
|
|
/*
|
|
* If it is not operational, then we have already marked it as dead
|
|
* else if it is the last working disks, ignore the error, let the
|
|
* next level up know.
|
|
* else mark the drive as failed
|
|
*/
|
|
if (test_bit(In_sync, &rdev->flags)
|
|
&& (conf->raid_disks - mddev->degraded) == 1) {
|
|
/*
|
|
* Don't fail the drive, act as though we were just a
|
|
* normal single drive.
|
|
* However don't try a recovery from this drive as
|
|
* it is very likely to fail.
|
|
*/
|
|
conf->recovery_disabled = mddev->recovery_disabled;
|
|
return;
|
|
}
|
|
set_bit(Blocked, &rdev->flags);
|
|
if (test_and_clear_bit(In_sync, &rdev->flags)) {
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&conf->device_lock, flags);
|
|
mddev->degraded++;
|
|
set_bit(Faulty, &rdev->flags);
|
|
spin_unlock_irqrestore(&conf->device_lock, flags);
|
|
/*
|
|
* if recovery is running, make sure it aborts.
|
|
*/
|
|
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
|
|
} else
|
|
set_bit(Faulty, &rdev->flags);
|
|
set_bit(MD_CHANGE_DEVS, &mddev->flags);
|
|
printk(KERN_ALERT
|
|
"md/raid1:%s: Disk failure on %s, disabling device.\n"
|
|
"md/raid1:%s: Operation continuing on %d devices.\n",
|
|
mdname(mddev), bdevname(rdev->bdev, b),
|
|
mdname(mddev), conf->raid_disks - mddev->degraded);
|
|
}
|
|
|
|
static void print_conf(conf_t *conf)
|
|
{
|
|
int i;
|
|
|
|
printk(KERN_DEBUG "RAID1 conf printout:\n");
|
|
if (!conf) {
|
|
printk(KERN_DEBUG "(!conf)\n");
|
|
return;
|
|
}
|
|
printk(KERN_DEBUG " --- wd:%d rd:%d\n", conf->raid_disks - conf->mddev->degraded,
|
|
conf->raid_disks);
|
|
|
|
rcu_read_lock();
|
|
for (i = 0; i < conf->raid_disks; i++) {
|
|
char b[BDEVNAME_SIZE];
|
|
mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
|
|
if (rdev)
|
|
printk(KERN_DEBUG " disk %d, wo:%d, o:%d, dev:%s\n",
|
|
i, !test_bit(In_sync, &rdev->flags),
|
|
!test_bit(Faulty, &rdev->flags),
|
|
bdevname(rdev->bdev,b));
|
|
}
|
|
rcu_read_unlock();
|
|
}
|
|
|
|
static void close_sync(conf_t *conf)
|
|
{
|
|
wait_barrier(conf);
|
|
allow_barrier(conf);
|
|
|
|
mempool_destroy(conf->r1buf_pool);
|
|
conf->r1buf_pool = NULL;
|
|
}
|
|
|
|
static int raid1_spare_active(mddev_t *mddev)
|
|
{
|
|
int i;
|
|
conf_t *conf = mddev->private;
|
|
int count = 0;
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* Find all failed disks within the RAID1 configuration
|
|
* and mark them readable.
|
|
* Called under mddev lock, so rcu protection not needed.
|
|
*/
|
|
for (i = 0; i < conf->raid_disks; i++) {
|
|
mdk_rdev_t *rdev = conf->mirrors[i].rdev;
|
|
if (rdev
|
|
&& !test_bit(Faulty, &rdev->flags)
|
|
&& !test_and_set_bit(In_sync, &rdev->flags)) {
|
|
count++;
|
|
sysfs_notify_dirent_safe(rdev->sysfs_state);
|
|
}
|
|
}
|
|
spin_lock_irqsave(&conf->device_lock, flags);
|
|
mddev->degraded -= count;
|
|
spin_unlock_irqrestore(&conf->device_lock, flags);
|
|
|
|
print_conf(conf);
|
|
return count;
|
|
}
|
|
|
|
|
|
static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
|
|
{
|
|
conf_t *conf = mddev->private;
|
|
int err = -EEXIST;
|
|
int mirror = 0;
|
|
mirror_info_t *p;
|
|
int first = 0;
|
|
int last = mddev->raid_disks - 1;
|
|
|
|
if (mddev->recovery_disabled == conf->recovery_disabled)
|
|
return -EBUSY;
|
|
|
|
if (rdev->raid_disk >= 0)
|
|
first = last = rdev->raid_disk;
|
|
|
|
for (mirror = first; mirror <= last; mirror++)
|
|
if ( !(p=conf->mirrors+mirror)->rdev) {
|
|
|
|
disk_stack_limits(mddev->gendisk, rdev->bdev,
|
|
rdev->data_offset << 9);
|
|
/* as we don't honour merge_bvec_fn, we must
|
|
* never risk violating it, so limit
|
|
* ->max_segments to one lying with a single
|
|
* page, as a one page request is never in
|
|
* violation.
|
|
*/
|
|
if (rdev->bdev->bd_disk->queue->merge_bvec_fn) {
|
|
blk_queue_max_segments(mddev->queue, 1);
|
|
blk_queue_segment_boundary(mddev->queue,
|
|
PAGE_CACHE_SIZE - 1);
|
|
}
|
|
|
|
p->head_position = 0;
|
|
rdev->raid_disk = mirror;
|
|
err = 0;
|
|
/* As all devices are equivalent, we don't need a full recovery
|
|
* if this was recently any drive of the array
|
|
*/
|
|
if (rdev->saved_raid_disk < 0)
|
|
conf->fullsync = 1;
|
|
rcu_assign_pointer(p->rdev, rdev);
|
|
break;
|
|
}
|
|
md_integrity_add_rdev(rdev, mddev);
|
|
print_conf(conf);
|
|
return err;
|
|
}
|
|
|
|
static int raid1_remove_disk(mddev_t *mddev, int number)
|
|
{
|
|
conf_t *conf = mddev->private;
|
|
int err = 0;
|
|
mdk_rdev_t *rdev;
|
|
mirror_info_t *p = conf->mirrors+ number;
|
|
|
|
print_conf(conf);
|
|
rdev = p->rdev;
|
|
if (rdev) {
|
|
if (test_bit(In_sync, &rdev->flags) ||
|
|
atomic_read(&rdev->nr_pending)) {
|
|
err = -EBUSY;
|
|
goto abort;
|
|
}
|
|
/* Only remove non-faulty devices if recovery
|
|
* is not possible.
|
|
*/
|
|
if (!test_bit(Faulty, &rdev->flags) &&
|
|
mddev->recovery_disabled != conf->recovery_disabled &&
|
|
mddev->degraded < conf->raid_disks) {
|
|
err = -EBUSY;
|
|
goto abort;
|
|
}
|
|
p->rdev = NULL;
|
|
synchronize_rcu();
|
|
if (atomic_read(&rdev->nr_pending)) {
|
|
/* lost the race, try later */
|
|
err = -EBUSY;
|
|
p->rdev = rdev;
|
|
goto abort;
|
|
}
|
|
err = md_integrity_register(mddev);
|
|
}
|
|
abort:
|
|
|
|
print_conf(conf);
|
|
return err;
|
|
}
|
|
|
|
|
|
static void end_sync_read(struct bio *bio, int error)
|
|
{
|
|
r1bio_t *r1_bio = bio->bi_private;
|
|
int i;
|
|
|
|
for (i=r1_bio->mddev->raid_disks; i--; )
|
|
if (r1_bio->bios[i] == bio)
|
|
break;
|
|
BUG_ON(i < 0);
|
|
update_head_pos(i, r1_bio);
|
|
/*
|
|
* we have read a block, now it needs to be re-written,
|
|
* or re-read if the read failed.
|
|
* We don't do much here, just schedule handling by raid1d
|
|
*/
|
|
if (test_bit(BIO_UPTODATE, &bio->bi_flags))
|
|
set_bit(R1BIO_Uptodate, &r1_bio->state);
|
|
|
|
if (atomic_dec_and_test(&r1_bio->remaining))
|
|
reschedule_retry(r1_bio);
|
|
}
|
|
|
|
static void end_sync_write(struct bio *bio, int error)
|
|
{
|
|
int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
|
|
r1bio_t *r1_bio = bio->bi_private;
|
|
mddev_t *mddev = r1_bio->mddev;
|
|
conf_t *conf = mddev->private;
|
|
int i;
|
|
int mirror=0;
|
|
|
|
for (i = 0; i < conf->raid_disks; i++)
|
|
if (r1_bio->bios[i] == bio) {
|
|
mirror = i;
|
|
break;
|
|
}
|
|
if (!uptodate) {
|
|
sector_t sync_blocks = 0;
|
|
sector_t s = r1_bio->sector;
|
|
long sectors_to_go = r1_bio->sectors;
|
|
/* make sure these bits doesn't get cleared. */
|
|
do {
|
|
bitmap_end_sync(mddev->bitmap, s,
|
|
&sync_blocks, 1);
|
|
s += sync_blocks;
|
|
sectors_to_go -= sync_blocks;
|
|
} while (sectors_to_go > 0);
|
|
md_error(mddev, conf->mirrors[mirror].rdev);
|
|
}
|
|
|
|
update_head_pos(mirror, r1_bio);
|
|
|
|
if (atomic_dec_and_test(&r1_bio->remaining)) {
|
|
sector_t s = r1_bio->sectors;
|
|
put_buf(r1_bio);
|
|
md_done_sync(mddev, s, uptodate);
|
|
}
|
|
}
|
|
|
|
static int fix_sync_read_error(r1bio_t *r1_bio)
|
|
{
|
|
/* Try some synchronous reads of other devices to get
|
|
* good data, much like with normal read errors. Only
|
|
* read into the pages we already have so we don't
|
|
* need to re-issue the read request.
|
|
* We don't need to freeze the array, because being in an
|
|
* active sync request, there is no normal IO, and
|
|
* no overlapping syncs.
|
|
* We don't need to check is_badblock() again as we
|
|
* made sure that anything with a bad block in range
|
|
* will have bi_end_io clear.
|
|
*/
|
|
mddev_t *mddev = r1_bio->mddev;
|
|
conf_t *conf = mddev->private;
|
|
struct bio *bio = r1_bio->bios[r1_bio->read_disk];
|
|
sector_t sect = r1_bio->sector;
|
|
int sectors = r1_bio->sectors;
|
|
int idx = 0;
|
|
|
|
while(sectors) {
|
|
int s = sectors;
|
|
int d = r1_bio->read_disk;
|
|
int success = 0;
|
|
mdk_rdev_t *rdev;
|
|
int start;
|
|
|
|
if (s > (PAGE_SIZE>>9))
|
|
s = PAGE_SIZE >> 9;
|
|
do {
|
|
if (r1_bio->bios[d]->bi_end_io == end_sync_read) {
|
|
/* No rcu protection needed here devices
|
|
* can only be removed when no resync is
|
|
* active, and resync is currently active
|
|
*/
|
|
rdev = conf->mirrors[d].rdev;
|
|
if (sync_page_io(rdev, sect, s<<9,
|
|
bio->bi_io_vec[idx].bv_page,
|
|
READ, false)) {
|
|
success = 1;
|
|
break;
|
|
}
|
|
}
|
|
d++;
|
|
if (d == conf->raid_disks)
|
|
d = 0;
|
|
} while (!success && d != r1_bio->read_disk);
|
|
|
|
if (!success) {
|
|
char b[BDEVNAME_SIZE];
|
|
/* Cannot read from anywhere, array is toast */
|
|
md_error(mddev, conf->mirrors[r1_bio->read_disk].rdev);
|
|
printk(KERN_ALERT "md/raid1:%s: %s: unrecoverable I/O read error"
|
|
" for block %llu\n",
|
|
mdname(mddev),
|
|
bdevname(bio->bi_bdev, b),
|
|
(unsigned long long)r1_bio->sector);
|
|
md_done_sync(mddev, r1_bio->sectors, 0);
|
|
put_buf(r1_bio);
|
|
return 0;
|
|
}
|
|
|
|
start = d;
|
|
/* write it back and re-read */
|
|
while (d != r1_bio->read_disk) {
|
|
if (d == 0)
|
|
d = conf->raid_disks;
|
|
d--;
|
|
if (r1_bio->bios[d]->bi_end_io != end_sync_read)
|
|
continue;
|
|
rdev = conf->mirrors[d].rdev;
|
|
if (sync_page_io(rdev, sect, s<<9,
|
|
bio->bi_io_vec[idx].bv_page,
|
|
WRITE, false) == 0) {
|
|
r1_bio->bios[d]->bi_end_io = NULL;
|
|
rdev_dec_pending(rdev, mddev);
|
|
md_error(mddev, rdev);
|
|
}
|
|
}
|
|
d = start;
|
|
while (d != r1_bio->read_disk) {
|
|
if (d == 0)
|
|
d = conf->raid_disks;
|
|
d--;
|
|
if (r1_bio->bios[d]->bi_end_io != end_sync_read)
|
|
continue;
|
|
rdev = conf->mirrors[d].rdev;
|
|
if (sync_page_io(rdev, sect, s<<9,
|
|
bio->bi_io_vec[idx].bv_page,
|
|
READ, false) == 0)
|
|
md_error(mddev, rdev);
|
|
else
|
|
atomic_add(s, &rdev->corrected_errors);
|
|
}
|
|
sectors -= s;
|
|
sect += s;
|
|
idx ++;
|
|
}
|
|
set_bit(R1BIO_Uptodate, &r1_bio->state);
|
|
set_bit(BIO_UPTODATE, &bio->bi_flags);
|
|
return 1;
|
|
}
|
|
|
|
static int process_checks(r1bio_t *r1_bio)
|
|
{
|
|
/* We have read all readable devices. If we haven't
|
|
* got the block, then there is no hope left.
|
|
* If we have, then we want to do a comparison
|
|
* and skip the write if everything is the same.
|
|
* If any blocks failed to read, then we need to
|
|
* attempt an over-write
|
|
*/
|
|
mddev_t *mddev = r1_bio->mddev;
|
|
conf_t *conf = mddev->private;
|
|
int primary;
|
|
int i;
|
|
|
|
for (primary = 0; primary < conf->raid_disks; primary++)
|
|
if (r1_bio->bios[primary]->bi_end_io == end_sync_read &&
|
|
test_bit(BIO_UPTODATE, &r1_bio->bios[primary]->bi_flags)) {
|
|
r1_bio->bios[primary]->bi_end_io = NULL;
|
|
rdev_dec_pending(conf->mirrors[primary].rdev, mddev);
|
|
break;
|
|
}
|
|
r1_bio->read_disk = primary;
|
|
for (i = 0; i < conf->raid_disks; i++) {
|
|
int j;
|
|
int vcnt = r1_bio->sectors >> (PAGE_SHIFT- 9);
|
|
struct bio *pbio = r1_bio->bios[primary];
|
|
struct bio *sbio = r1_bio->bios[i];
|
|
int size;
|
|
|
|
if (r1_bio->bios[i]->bi_end_io != end_sync_read)
|
|
continue;
|
|
|
|
if (test_bit(BIO_UPTODATE, &sbio->bi_flags)) {
|
|
for (j = vcnt; j-- ; ) {
|
|
struct page *p, *s;
|
|
p = pbio->bi_io_vec[j].bv_page;
|
|
s = sbio->bi_io_vec[j].bv_page;
|
|
if (memcmp(page_address(p),
|
|
page_address(s),
|
|
PAGE_SIZE))
|
|
break;
|
|
}
|
|
} else
|
|
j = 0;
|
|
if (j >= 0)
|
|
mddev->resync_mismatches += r1_bio->sectors;
|
|
if (j < 0 || (test_bit(MD_RECOVERY_CHECK, &mddev->recovery)
|
|
&& test_bit(BIO_UPTODATE, &sbio->bi_flags))) {
|
|
/* No need to write to this device. */
|
|
sbio->bi_end_io = NULL;
|
|
rdev_dec_pending(conf->mirrors[i].rdev, mddev);
|
|
continue;
|
|
}
|
|
/* fixup the bio for reuse */
|
|
sbio->bi_vcnt = vcnt;
|
|
sbio->bi_size = r1_bio->sectors << 9;
|
|
sbio->bi_idx = 0;
|
|
sbio->bi_phys_segments = 0;
|
|
sbio->bi_flags &= ~(BIO_POOL_MASK - 1);
|
|
sbio->bi_flags |= 1 << BIO_UPTODATE;
|
|
sbio->bi_next = NULL;
|
|
sbio->bi_sector = r1_bio->sector +
|
|
conf->mirrors[i].rdev->data_offset;
|
|
sbio->bi_bdev = conf->mirrors[i].rdev->bdev;
|
|
size = sbio->bi_size;
|
|
for (j = 0; j < vcnt ; j++) {
|
|
struct bio_vec *bi;
|
|
bi = &sbio->bi_io_vec[j];
|
|
bi->bv_offset = 0;
|
|
if (size > PAGE_SIZE)
|
|
bi->bv_len = PAGE_SIZE;
|
|
else
|
|
bi->bv_len = size;
|
|
size -= PAGE_SIZE;
|
|
memcpy(page_address(bi->bv_page),
|
|
page_address(pbio->bi_io_vec[j].bv_page),
|
|
PAGE_SIZE);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio)
|
|
{
|
|
conf_t *conf = mddev->private;
|
|
int i;
|
|
int disks = conf->raid_disks;
|
|
struct bio *bio, *wbio;
|
|
|
|
bio = r1_bio->bios[r1_bio->read_disk];
|
|
|
|
if (!test_bit(R1BIO_Uptodate, &r1_bio->state))
|
|
/* ouch - failed to read all of that. */
|
|
if (!fix_sync_read_error(r1_bio))
|
|
return;
|
|
|
|
if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
|
|
if (process_checks(r1_bio) < 0)
|
|
return;
|
|
/*
|
|
* schedule writes
|
|
*/
|
|
atomic_set(&r1_bio->remaining, 1);
|
|
for (i = 0; i < disks ; i++) {
|
|
wbio = r1_bio->bios[i];
|
|
if (wbio->bi_end_io == NULL ||
|
|
(wbio->bi_end_io == end_sync_read &&
|
|
(i == r1_bio->read_disk ||
|
|
!test_bit(MD_RECOVERY_SYNC, &mddev->recovery))))
|
|
continue;
|
|
|
|
wbio->bi_rw = WRITE;
|
|
wbio->bi_end_io = end_sync_write;
|
|
atomic_inc(&r1_bio->remaining);
|
|
md_sync_acct(conf->mirrors[i].rdev->bdev, wbio->bi_size >> 9);
|
|
|
|
generic_make_request(wbio);
|
|
}
|
|
|
|
if (atomic_dec_and_test(&r1_bio->remaining)) {
|
|
/* if we're here, all write(s) have completed, so clean up */
|
|
md_done_sync(mddev, r1_bio->sectors, 1);
|
|
put_buf(r1_bio);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This is a kernel thread which:
|
|
*
|
|
* 1. Retries failed read operations on working mirrors.
|
|
* 2. Updates the raid superblock when problems encounter.
|
|
* 3. Performs writes following reads for array synchronising.
|
|
*/
|
|
|
|
static void fix_read_error(conf_t *conf, int read_disk,
|
|
sector_t sect, int sectors)
|
|
{
|
|
mddev_t *mddev = conf->mddev;
|
|
while(sectors) {
|
|
int s = sectors;
|
|
int d = read_disk;
|
|
int success = 0;
|
|
int start;
|
|
mdk_rdev_t *rdev;
|
|
|
|
if (s > (PAGE_SIZE>>9))
|
|
s = PAGE_SIZE >> 9;
|
|
|
|
do {
|
|
/* Note: no rcu protection needed here
|
|
* as this is synchronous in the raid1d thread
|
|
* which is the thread that might remove
|
|
* a device. If raid1d ever becomes multi-threaded....
|
|
*/
|
|
sector_t first_bad;
|
|
int bad_sectors;
|
|
|
|
rdev = conf->mirrors[d].rdev;
|
|
if (rdev &&
|
|
test_bit(In_sync, &rdev->flags) &&
|
|
is_badblock(rdev, sect, s,
|
|
&first_bad, &bad_sectors) == 0 &&
|
|
sync_page_io(rdev, sect, s<<9,
|
|
conf->tmppage, READ, false))
|
|
success = 1;
|
|
else {
|
|
d++;
|
|
if (d == conf->raid_disks)
|
|
d = 0;
|
|
}
|
|
} while (!success && d != read_disk);
|
|
|
|
if (!success) {
|
|
/* Cannot read from anywhere -- bye bye array */
|
|
md_error(mddev, conf->mirrors[read_disk].rdev);
|
|
break;
|
|
}
|
|
/* write it back and re-read */
|
|
start = d;
|
|
while (d != read_disk) {
|
|
if (d==0)
|
|
d = conf->raid_disks;
|
|
d--;
|
|
rdev = conf->mirrors[d].rdev;
|
|
if (rdev &&
|
|
test_bit(In_sync, &rdev->flags)) {
|
|
if (sync_page_io(rdev, sect, s<<9,
|
|
conf->tmppage, WRITE, false)
|
|
== 0)
|
|
/* Well, this device is dead */
|
|
md_error(mddev, rdev);
|
|
}
|
|
}
|
|
d = start;
|
|
while (d != read_disk) {
|
|
char b[BDEVNAME_SIZE];
|
|
if (d==0)
|
|
d = conf->raid_disks;
|
|
d--;
|
|
rdev = conf->mirrors[d].rdev;
|
|
if (rdev &&
|
|
test_bit(In_sync, &rdev->flags)) {
|
|
if (sync_page_io(rdev, sect, s<<9,
|
|
conf->tmppage, READ, false)
|
|
== 0)
|
|
/* Well, this device is dead */
|
|
md_error(mddev, rdev);
|
|
else {
|
|
atomic_add(s, &rdev->corrected_errors);
|
|
printk(KERN_INFO
|
|
"md/raid1:%s: read error corrected "
|
|
"(%d sectors at %llu on %s)\n",
|
|
mdname(mddev), s,
|
|
(unsigned long long)(sect +
|
|
rdev->data_offset),
|
|
bdevname(rdev->bdev, b));
|
|
}
|
|
}
|
|
}
|
|
sectors -= s;
|
|
sect += s;
|
|
}
|
|
}
|
|
|
|
static void raid1d(mddev_t *mddev)
|
|
{
|
|
r1bio_t *r1_bio;
|
|
struct bio *bio;
|
|
unsigned long flags;
|
|
conf_t *conf = mddev->private;
|
|
struct list_head *head = &conf->retry_list;
|
|
mdk_rdev_t *rdev;
|
|
struct blk_plug plug;
|
|
|
|
md_check_recovery(mddev);
|
|
|
|
blk_start_plug(&plug);
|
|
for (;;) {
|
|
char b[BDEVNAME_SIZE];
|
|
|
|
if (atomic_read(&mddev->plug_cnt) == 0)
|
|
flush_pending_writes(conf);
|
|
|
|
spin_lock_irqsave(&conf->device_lock, flags);
|
|
if (list_empty(head)) {
|
|
spin_unlock_irqrestore(&conf->device_lock, flags);
|
|
break;
|
|
}
|
|
r1_bio = list_entry(head->prev, r1bio_t, retry_list);
|
|
list_del(head->prev);
|
|
conf->nr_queued--;
|
|
spin_unlock_irqrestore(&conf->device_lock, flags);
|
|
|
|
mddev = r1_bio->mddev;
|
|
conf = mddev->private;
|
|
if (test_bit(R1BIO_IsSync, &r1_bio->state))
|
|
sync_request_write(mddev, r1_bio);
|
|
else if (test_bit(R1BIO_ReadError, &r1_bio->state)) {
|
|
int disk;
|
|
int max_sectors;
|
|
|
|
clear_bit(R1BIO_ReadError, &r1_bio->state);
|
|
/* we got a read error. Maybe the drive is bad. Maybe just
|
|
* the block and we can fix it.
|
|
* We freeze all other IO, and try reading the block from
|
|
* other devices. When we find one, we re-write
|
|
* and check it that fixes the read error.
|
|
* This is all done synchronously while the array is
|
|
* frozen
|
|
*/
|
|
if (mddev->ro == 0) {
|
|
freeze_array(conf);
|
|
fix_read_error(conf, r1_bio->read_disk,
|
|
r1_bio->sector,
|
|
r1_bio->sectors);
|
|
unfreeze_array(conf);
|
|
} else
|
|
md_error(mddev,
|
|
conf->mirrors[r1_bio->read_disk].rdev);
|
|
|
|
bio = r1_bio->bios[r1_bio->read_disk];
|
|
bdevname(bio->bi_bdev, b);
|
|
read_more:
|
|
disk = read_balance(conf, r1_bio, &max_sectors);
|
|
if (disk == -1) {
|
|
printk(KERN_ALERT "md/raid1:%s: %s: unrecoverable I/O"
|
|
" read error for block %llu\n",
|
|
mdname(mddev), b,
|
|
(unsigned long long)r1_bio->sector);
|
|
raid_end_bio_io(r1_bio);
|
|
} else {
|
|
const unsigned long do_sync = r1_bio->master_bio->bi_rw & REQ_SYNC;
|
|
if (bio) {
|
|
r1_bio->bios[r1_bio->read_disk] =
|
|
mddev->ro ? IO_BLOCKED : NULL;
|
|
bio_put(bio);
|
|
}
|
|
r1_bio->read_disk = disk;
|
|
bio = bio_clone_mddev(r1_bio->master_bio,
|
|
GFP_NOIO, mddev);
|
|
md_trim_bio(bio,
|
|
r1_bio->sector - bio->bi_sector,
|
|
max_sectors);
|
|
r1_bio->bios[r1_bio->read_disk] = bio;
|
|
rdev = conf->mirrors[disk].rdev;
|
|
printk_ratelimited(
|
|
KERN_ERR
|
|
"md/raid1:%s: redirecting sector %llu"
|
|
" to other mirror: %s\n",
|
|
mdname(mddev),
|
|
(unsigned long long)r1_bio->sector,
|
|
bdevname(rdev->bdev, b));
|
|
bio->bi_sector = r1_bio->sector + rdev->data_offset;
|
|
bio->bi_bdev = rdev->bdev;
|
|
bio->bi_end_io = raid1_end_read_request;
|
|
bio->bi_rw = READ | do_sync;
|
|
bio->bi_private = r1_bio;
|
|
if (max_sectors < r1_bio->sectors) {
|
|
/* Drat - have to split this up more */
|
|
struct bio *mbio = r1_bio->master_bio;
|
|
int sectors_handled =
|
|
r1_bio->sector + max_sectors
|
|
- mbio->bi_sector;
|
|
r1_bio->sectors = max_sectors;
|
|
spin_lock_irq(&conf->device_lock);
|
|
if (mbio->bi_phys_segments == 0)
|
|
mbio->bi_phys_segments = 2;
|
|
else
|
|
mbio->bi_phys_segments++;
|
|
spin_unlock_irq(&conf->device_lock);
|
|
generic_make_request(bio);
|
|
bio = NULL;
|
|
|
|
r1_bio = mempool_alloc(conf->r1bio_pool,
|
|
GFP_NOIO);
|
|
|
|
r1_bio->master_bio = mbio;
|
|
r1_bio->sectors = (mbio->bi_size >> 9)
|
|
- sectors_handled;
|
|
r1_bio->state = 0;
|
|
set_bit(R1BIO_ReadError,
|
|
&r1_bio->state);
|
|
r1_bio->mddev = mddev;
|
|
r1_bio->sector = mbio->bi_sector
|
|
+ sectors_handled;
|
|
|
|
goto read_more;
|
|
} else
|
|
generic_make_request(bio);
|
|
}
|
|
} else {
|
|
/* just a partial read to be scheduled from separate
|
|
* context
|
|
*/
|
|
generic_make_request(r1_bio->bios[r1_bio->read_disk]);
|
|
}
|
|
cond_resched();
|
|
if (mddev->flags & ~(1<<MD_CHANGE_PENDING))
|
|
md_check_recovery(mddev);
|
|
}
|
|
blk_finish_plug(&plug);
|
|
}
|
|
|
|
|
|
static int init_resync(conf_t *conf)
|
|
{
|
|
int buffs;
|
|
|
|
buffs = RESYNC_WINDOW / RESYNC_BLOCK_SIZE;
|
|
BUG_ON(conf->r1buf_pool);
|
|
conf->r1buf_pool = mempool_create(buffs, r1buf_pool_alloc, r1buf_pool_free,
|
|
conf->poolinfo);
|
|
if (!conf->r1buf_pool)
|
|
return -ENOMEM;
|
|
conf->next_resync = 0;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* perform a "sync" on one "block"
|
|
*
|
|
* We need to make sure that no normal I/O request - particularly write
|
|
* requests - conflict with active sync requests.
|
|
*
|
|
* This is achieved by tracking pending requests and a 'barrier' concept
|
|
* that can be installed to exclude normal IO requests.
|
|
*/
|
|
|
|
static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, int go_faster)
|
|
{
|
|
conf_t *conf = mddev->private;
|
|
r1bio_t *r1_bio;
|
|
struct bio *bio;
|
|
sector_t max_sector, nr_sectors;
|
|
int disk = -1;
|
|
int i;
|
|
int wonly = -1;
|
|
int write_targets = 0, read_targets = 0;
|
|
sector_t sync_blocks;
|
|
int still_degraded = 0;
|
|
int good_sectors = RESYNC_SECTORS;
|
|
int min_bad = 0; /* number of sectors that are bad in all devices */
|
|
|
|
if (!conf->r1buf_pool)
|
|
if (init_resync(conf))
|
|
return 0;
|
|
|
|
max_sector = mddev->dev_sectors;
|
|
if (sector_nr >= max_sector) {
|
|
/* If we aborted, we need to abort the
|
|
* sync on the 'current' bitmap chunk (there will
|
|
* only be one in raid1 resync.
|
|
* We can find the current addess in mddev->curr_resync
|
|
*/
|
|
if (mddev->curr_resync < max_sector) /* aborted */
|
|
bitmap_end_sync(mddev->bitmap, mddev->curr_resync,
|
|
&sync_blocks, 1);
|
|
else /* completed sync */
|
|
conf->fullsync = 0;
|
|
|
|
bitmap_close_sync(mddev->bitmap);
|
|
close_sync(conf);
|
|
return 0;
|
|
}
|
|
|
|
if (mddev->bitmap == NULL &&
|
|
mddev->recovery_cp == MaxSector &&
|
|
!test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) &&
|
|
conf->fullsync == 0) {
|
|
*skipped = 1;
|
|
return max_sector - sector_nr;
|
|
}
|
|
/* before building a request, check if we can skip these blocks..
|
|
* This call the bitmap_start_sync doesn't actually record anything
|
|
*/
|
|
if (!bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 1) &&
|
|
!conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
|
|
/* We can skip this block, and probably several more */
|
|
*skipped = 1;
|
|
return sync_blocks;
|
|
}
|
|
/*
|
|
* If there is non-resync activity waiting for a turn,
|
|
* and resync is going fast enough,
|
|
* then let it though before starting on this new sync request.
|
|
*/
|
|
if (!go_faster && conf->nr_waiting)
|
|
msleep_interruptible(1000);
|
|
|
|
bitmap_cond_end_sync(mddev->bitmap, sector_nr);
|
|
r1_bio = mempool_alloc(conf->r1buf_pool, GFP_NOIO);
|
|
raise_barrier(conf);
|
|
|
|
conf->next_resync = sector_nr;
|
|
|
|
rcu_read_lock();
|
|
/*
|
|
* If we get a correctably read error during resync or recovery,
|
|
* we might want to read from a different device. So we
|
|
* flag all drives that could conceivably be read from for READ,
|
|
* and any others (which will be non-In_sync devices) for WRITE.
|
|
* If a read fails, we try reading from something else for which READ
|
|
* is OK.
|
|
*/
|
|
|
|
r1_bio->mddev = mddev;
|
|
r1_bio->sector = sector_nr;
|
|
r1_bio->state = 0;
|
|
set_bit(R1BIO_IsSync, &r1_bio->state);
|
|
|
|
for (i=0; i < conf->raid_disks; i++) {
|
|
mdk_rdev_t *rdev;
|
|
bio = r1_bio->bios[i];
|
|
|
|
/* take from bio_init */
|
|
bio->bi_next = NULL;
|
|
bio->bi_flags &= ~(BIO_POOL_MASK-1);
|
|
bio->bi_flags |= 1 << BIO_UPTODATE;
|
|
bio->bi_comp_cpu = -1;
|
|
bio->bi_rw = READ;
|
|
bio->bi_vcnt = 0;
|
|
bio->bi_idx = 0;
|
|
bio->bi_phys_segments = 0;
|
|
bio->bi_size = 0;
|
|
bio->bi_end_io = NULL;
|
|
bio->bi_private = NULL;
|
|
|
|
rdev = rcu_dereference(conf->mirrors[i].rdev);
|
|
if (rdev == NULL ||
|
|
test_bit(Faulty, &rdev->flags)) {
|
|
still_degraded = 1;
|
|
} else if (!test_bit(In_sync, &rdev->flags)) {
|
|
bio->bi_rw = WRITE;
|
|
bio->bi_end_io = end_sync_write;
|
|
write_targets ++;
|
|
} else {
|
|
/* may need to read from here */
|
|
sector_t first_bad = MaxSector;
|
|
int bad_sectors;
|
|
|
|
if (is_badblock(rdev, sector_nr, good_sectors,
|
|
&first_bad, &bad_sectors)) {
|
|
if (first_bad > sector_nr)
|
|
good_sectors = first_bad - sector_nr;
|
|
else {
|
|
bad_sectors -= (sector_nr - first_bad);
|
|
if (min_bad == 0 ||
|
|
min_bad > bad_sectors)
|
|
min_bad = bad_sectors;
|
|
}
|
|
}
|
|
if (sector_nr < first_bad) {
|
|
if (test_bit(WriteMostly, &rdev->flags)) {
|
|
if (wonly < 0)
|
|
wonly = i;
|
|
} else {
|
|
if (disk < 0)
|
|
disk = i;
|
|
}
|
|
bio->bi_rw = READ;
|
|
bio->bi_end_io = end_sync_read;
|
|
read_targets++;
|
|
}
|
|
}
|
|
if (bio->bi_end_io) {
|
|
atomic_inc(&rdev->nr_pending);
|
|
bio->bi_sector = sector_nr + rdev->data_offset;
|
|
bio->bi_bdev = rdev->bdev;
|
|
bio->bi_private = r1_bio;
|
|
}
|
|
}
|
|
rcu_read_unlock();
|
|
if (disk < 0)
|
|
disk = wonly;
|
|
r1_bio->read_disk = disk;
|
|
|
|
if (read_targets == 0 && min_bad > 0) {
|
|
/* These sectors are bad on all InSync devices, so we
|
|
* need to mark them bad on all write targets
|
|
*/
|
|
int ok = 1;
|
|
for (i = 0 ; i < conf->raid_disks ; i++)
|
|
if (r1_bio->bios[i]->bi_end_io == end_sync_write) {
|
|
mdk_rdev_t *rdev =
|
|
rcu_dereference(conf->mirrors[i].rdev);
|
|
ok = rdev_set_badblocks(rdev, sector_nr,
|
|
min_bad, 0
|
|
) && ok;
|
|
}
|
|
set_bit(MD_CHANGE_DEVS, &mddev->flags);
|
|
*skipped = 1;
|
|
put_buf(r1_bio);
|
|
|
|
if (!ok) {
|
|
/* Cannot record the badblocks, so need to
|
|
* abort the resync.
|
|
* If there are multiple read targets, could just
|
|
* fail the really bad ones ???
|
|
*/
|
|
conf->recovery_disabled = mddev->recovery_disabled;
|
|
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
|
|
return 0;
|
|
} else
|
|
return min_bad;
|
|
|
|
}
|
|
if (min_bad > 0 && min_bad < good_sectors) {
|
|
/* only resync enough to reach the next bad->good
|
|
* transition */
|
|
good_sectors = min_bad;
|
|
}
|
|
|
|
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) && read_targets > 0)
|
|
/* extra read targets are also write targets */
|
|
write_targets += read_targets-1;
|
|
|
|
if (write_targets == 0 || read_targets == 0) {
|
|
/* There is nowhere to write, so all non-sync
|
|
* drives must be failed - so we are finished
|
|
*/
|
|
sector_t rv = max_sector - sector_nr;
|
|
*skipped = 1;
|
|
put_buf(r1_bio);
|
|
return rv;
|
|
}
|
|
|
|
if (max_sector > mddev->resync_max)
|
|
max_sector = mddev->resync_max; /* Don't do IO beyond here */
|
|
if (max_sector > sector_nr + good_sectors)
|
|
max_sector = sector_nr + good_sectors;
|
|
nr_sectors = 0;
|
|
sync_blocks = 0;
|
|
do {
|
|
struct page *page;
|
|
int len = PAGE_SIZE;
|
|
if (sector_nr + (len>>9) > max_sector)
|
|
len = (max_sector - sector_nr) << 9;
|
|
if (len == 0)
|
|
break;
|
|
if (sync_blocks == 0) {
|
|
if (!bitmap_start_sync(mddev->bitmap, sector_nr,
|
|
&sync_blocks, still_degraded) &&
|
|
!conf->fullsync &&
|
|
!test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
|
|
break;
|
|
BUG_ON(sync_blocks < (PAGE_SIZE>>9));
|
|
if ((len >> 9) > sync_blocks)
|
|
len = sync_blocks<<9;
|
|
}
|
|
|
|
for (i=0 ; i < conf->raid_disks; i++) {
|
|
bio = r1_bio->bios[i];
|
|
if (bio->bi_end_io) {
|
|
page = bio->bi_io_vec[bio->bi_vcnt].bv_page;
|
|
if (bio_add_page(bio, page, len, 0) == 0) {
|
|
/* stop here */
|
|
bio->bi_io_vec[bio->bi_vcnt].bv_page = page;
|
|
while (i > 0) {
|
|
i--;
|
|
bio = r1_bio->bios[i];
|
|
if (bio->bi_end_io==NULL)
|
|
continue;
|
|
/* remove last page from this bio */
|
|
bio->bi_vcnt--;
|
|
bio->bi_size -= len;
|
|
bio->bi_flags &= ~(1<< BIO_SEG_VALID);
|
|
}
|
|
goto bio_full;
|
|
}
|
|
}
|
|
}
|
|
nr_sectors += len>>9;
|
|
sector_nr += len>>9;
|
|
sync_blocks -= (len>>9);
|
|
} while (r1_bio->bios[disk]->bi_vcnt < RESYNC_PAGES);
|
|
bio_full:
|
|
r1_bio->sectors = nr_sectors;
|
|
|
|
/* For a user-requested sync, we read all readable devices and do a
|
|
* compare
|
|
*/
|
|
if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
|
|
atomic_set(&r1_bio->remaining, read_targets);
|
|
for (i=0; i<conf->raid_disks; i++) {
|
|
bio = r1_bio->bios[i];
|
|
if (bio->bi_end_io == end_sync_read) {
|
|
md_sync_acct(bio->bi_bdev, nr_sectors);
|
|
generic_make_request(bio);
|
|
}
|
|
}
|
|
} else {
|
|
atomic_set(&r1_bio->remaining, 1);
|
|
bio = r1_bio->bios[r1_bio->read_disk];
|
|
md_sync_acct(bio->bi_bdev, nr_sectors);
|
|
generic_make_request(bio);
|
|
|
|
}
|
|
return nr_sectors;
|
|
}
|
|
|
|
static sector_t raid1_size(mddev_t *mddev, sector_t sectors, int raid_disks)
|
|
{
|
|
if (sectors)
|
|
return sectors;
|
|
|
|
return mddev->dev_sectors;
|
|
}
|
|
|
|
static conf_t *setup_conf(mddev_t *mddev)
|
|
{
|
|
conf_t *conf;
|
|
int i;
|
|
mirror_info_t *disk;
|
|
mdk_rdev_t *rdev;
|
|
int err = -ENOMEM;
|
|
|
|
conf = kzalloc(sizeof(conf_t), GFP_KERNEL);
|
|
if (!conf)
|
|
goto abort;
|
|
|
|
conf->mirrors = kzalloc(sizeof(struct mirror_info)*mddev->raid_disks,
|
|
GFP_KERNEL);
|
|
if (!conf->mirrors)
|
|
goto abort;
|
|
|
|
conf->tmppage = alloc_page(GFP_KERNEL);
|
|
if (!conf->tmppage)
|
|
goto abort;
|
|
|
|
conf->poolinfo = kzalloc(sizeof(*conf->poolinfo), GFP_KERNEL);
|
|
if (!conf->poolinfo)
|
|
goto abort;
|
|
conf->poolinfo->raid_disks = mddev->raid_disks;
|
|
conf->r1bio_pool = mempool_create(NR_RAID1_BIOS, r1bio_pool_alloc,
|
|
r1bio_pool_free,
|
|
conf->poolinfo);
|
|
if (!conf->r1bio_pool)
|
|
goto abort;
|
|
|
|
conf->poolinfo->mddev = mddev;
|
|
|
|
spin_lock_init(&conf->device_lock);
|
|
list_for_each_entry(rdev, &mddev->disks, same_set) {
|
|
int disk_idx = rdev->raid_disk;
|
|
if (disk_idx >= mddev->raid_disks
|
|
|| disk_idx < 0)
|
|
continue;
|
|
disk = conf->mirrors + disk_idx;
|
|
|
|
disk->rdev = rdev;
|
|
|
|
disk->head_position = 0;
|
|
}
|
|
conf->raid_disks = mddev->raid_disks;
|
|
conf->mddev = mddev;
|
|
INIT_LIST_HEAD(&conf->retry_list);
|
|
|
|
spin_lock_init(&conf->resync_lock);
|
|
init_waitqueue_head(&conf->wait_barrier);
|
|
|
|
bio_list_init(&conf->pending_bio_list);
|
|
|
|
conf->last_used = -1;
|
|
for (i = 0; i < conf->raid_disks; i++) {
|
|
|
|
disk = conf->mirrors + i;
|
|
|
|
if (!disk->rdev ||
|
|
!test_bit(In_sync, &disk->rdev->flags)) {
|
|
disk->head_position = 0;
|
|
if (disk->rdev)
|
|
conf->fullsync = 1;
|
|
} else if (conf->last_used < 0)
|
|
/*
|
|
* The first working device is used as a
|
|
* starting point to read balancing.
|
|
*/
|
|
conf->last_used = i;
|
|
}
|
|
|
|
err = -EIO;
|
|
if (conf->last_used < 0) {
|
|
printk(KERN_ERR "md/raid1:%s: no operational mirrors\n",
|
|
mdname(mddev));
|
|
goto abort;
|
|
}
|
|
err = -ENOMEM;
|
|
conf->thread = md_register_thread(raid1d, mddev, NULL);
|
|
if (!conf->thread) {
|
|
printk(KERN_ERR
|
|
"md/raid1:%s: couldn't allocate thread\n",
|
|
mdname(mddev));
|
|
goto abort;
|
|
}
|
|
|
|
return conf;
|
|
|
|
abort:
|
|
if (conf) {
|
|
if (conf->r1bio_pool)
|
|
mempool_destroy(conf->r1bio_pool);
|
|
kfree(conf->mirrors);
|
|
safe_put_page(conf->tmppage);
|
|
kfree(conf->poolinfo);
|
|
kfree(conf);
|
|
}
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static int run(mddev_t *mddev)
|
|
{
|
|
conf_t *conf;
|
|
int i;
|
|
mdk_rdev_t *rdev;
|
|
|
|
if (mddev->level != 1) {
|
|
printk(KERN_ERR "md/raid1:%s: raid level not set to mirroring (%d)\n",
|
|
mdname(mddev), mddev->level);
|
|
return -EIO;
|
|
}
|
|
if (mddev->reshape_position != MaxSector) {
|
|
printk(KERN_ERR "md/raid1:%s: reshape_position set but not supported\n",
|
|
mdname(mddev));
|
|
return -EIO;
|
|
}
|
|
/*
|
|
* copy the already verified devices into our private RAID1
|
|
* bookkeeping area. [whatever we allocate in run(),
|
|
* should be freed in stop()]
|
|
*/
|
|
if (mddev->private == NULL)
|
|
conf = setup_conf(mddev);
|
|
else
|
|
conf = mddev->private;
|
|
|
|
if (IS_ERR(conf))
|
|
return PTR_ERR(conf);
|
|
|
|
list_for_each_entry(rdev, &mddev->disks, same_set) {
|
|
if (!mddev->gendisk)
|
|
continue;
|
|
disk_stack_limits(mddev->gendisk, rdev->bdev,
|
|
rdev->data_offset << 9);
|
|
/* as we don't honour merge_bvec_fn, we must never risk
|
|
* violating it, so limit ->max_segments to 1 lying within
|
|
* a single page, as a one page request is never in violation.
|
|
*/
|
|
if (rdev->bdev->bd_disk->queue->merge_bvec_fn) {
|
|
blk_queue_max_segments(mddev->queue, 1);
|
|
blk_queue_segment_boundary(mddev->queue,
|
|
PAGE_CACHE_SIZE - 1);
|
|
}
|
|
}
|
|
|
|
mddev->degraded = 0;
|
|
for (i=0; i < conf->raid_disks; i++)
|
|
if (conf->mirrors[i].rdev == NULL ||
|
|
!test_bit(In_sync, &conf->mirrors[i].rdev->flags) ||
|
|
test_bit(Faulty, &conf->mirrors[i].rdev->flags))
|
|
mddev->degraded++;
|
|
|
|
if (conf->raid_disks - mddev->degraded == 1)
|
|
mddev->recovery_cp = MaxSector;
|
|
|
|
if (mddev->recovery_cp != MaxSector)
|
|
printk(KERN_NOTICE "md/raid1:%s: not clean"
|
|
" -- starting background reconstruction\n",
|
|
mdname(mddev));
|
|
printk(KERN_INFO
|
|
"md/raid1:%s: active with %d out of %d mirrors\n",
|
|
mdname(mddev), mddev->raid_disks - mddev->degraded,
|
|
mddev->raid_disks);
|
|
|
|
/*
|
|
* Ok, everything is just fine now
|
|
*/
|
|
mddev->thread = conf->thread;
|
|
conf->thread = NULL;
|
|
mddev->private = conf;
|
|
|
|
md_set_array_sectors(mddev, raid1_size(mddev, 0, 0));
|
|
|
|
if (mddev->queue) {
|
|
mddev->queue->backing_dev_info.congested_fn = raid1_congested;
|
|
mddev->queue->backing_dev_info.congested_data = mddev;
|
|
}
|
|
return md_integrity_register(mddev);
|
|
}
|
|
|
|
static int stop(mddev_t *mddev)
|
|
{
|
|
conf_t *conf = mddev->private;
|
|
struct bitmap *bitmap = mddev->bitmap;
|
|
|
|
/* wait for behind writes to complete */
|
|
if (bitmap && atomic_read(&bitmap->behind_writes) > 0) {
|
|
printk(KERN_INFO "md/raid1:%s: behind writes in progress - waiting to stop.\n",
|
|
mdname(mddev));
|
|
/* need to kick something here to make sure I/O goes? */
|
|
wait_event(bitmap->behind_wait,
|
|
atomic_read(&bitmap->behind_writes) == 0);
|
|
}
|
|
|
|
raise_barrier(conf);
|
|
lower_barrier(conf);
|
|
|
|
md_unregister_thread(mddev->thread);
|
|
mddev->thread = NULL;
|
|
if (conf->r1bio_pool)
|
|
mempool_destroy(conf->r1bio_pool);
|
|
kfree(conf->mirrors);
|
|
kfree(conf->poolinfo);
|
|
kfree(conf);
|
|
mddev->private = NULL;
|
|
return 0;
|
|
}
|
|
|
|
static int raid1_resize(mddev_t *mddev, sector_t sectors)
|
|
{
|
|
/* no resync is happening, and there is enough space
|
|
* on all devices, so we can resize.
|
|
* We need to make sure resync covers any new space.
|
|
* If the array is shrinking we should possibly wait until
|
|
* any io in the removed space completes, but it hardly seems
|
|
* worth it.
|
|
*/
|
|
md_set_array_sectors(mddev, raid1_size(mddev, sectors, 0));
|
|
if (mddev->array_sectors > raid1_size(mddev, sectors, 0))
|
|
return -EINVAL;
|
|
set_capacity(mddev->gendisk, mddev->array_sectors);
|
|
revalidate_disk(mddev->gendisk);
|
|
if (sectors > mddev->dev_sectors &&
|
|
mddev->recovery_cp > mddev->dev_sectors) {
|
|
mddev->recovery_cp = mddev->dev_sectors;
|
|
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
|
|
}
|
|
mddev->dev_sectors = sectors;
|
|
mddev->resync_max_sectors = sectors;
|
|
return 0;
|
|
}
|
|
|
|
static int raid1_reshape(mddev_t *mddev)
|
|
{
|
|
/* We need to:
|
|
* 1/ resize the r1bio_pool
|
|
* 2/ resize conf->mirrors
|
|
*
|
|
* We allocate a new r1bio_pool if we can.
|
|
* Then raise a device barrier and wait until all IO stops.
|
|
* Then resize conf->mirrors and swap in the new r1bio pool.
|
|
*
|
|
* At the same time, we "pack" the devices so that all the missing
|
|
* devices have the higher raid_disk numbers.
|
|
*/
|
|
mempool_t *newpool, *oldpool;
|
|
struct pool_info *newpoolinfo;
|
|
mirror_info_t *newmirrors;
|
|
conf_t *conf = mddev->private;
|
|
int cnt, raid_disks;
|
|
unsigned long flags;
|
|
int d, d2, err;
|
|
|
|
/* Cannot change chunk_size, layout, or level */
|
|
if (mddev->chunk_sectors != mddev->new_chunk_sectors ||
|
|
mddev->layout != mddev->new_layout ||
|
|
mddev->level != mddev->new_level) {
|
|
mddev->new_chunk_sectors = mddev->chunk_sectors;
|
|
mddev->new_layout = mddev->layout;
|
|
mddev->new_level = mddev->level;
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = md_allow_write(mddev);
|
|
if (err)
|
|
return err;
|
|
|
|
raid_disks = mddev->raid_disks + mddev->delta_disks;
|
|
|
|
if (raid_disks < conf->raid_disks) {
|
|
cnt=0;
|
|
for (d= 0; d < conf->raid_disks; d++)
|
|
if (conf->mirrors[d].rdev)
|
|
cnt++;
|
|
if (cnt > raid_disks)
|
|
return -EBUSY;
|
|
}
|
|
|
|
newpoolinfo = kmalloc(sizeof(*newpoolinfo), GFP_KERNEL);
|
|
if (!newpoolinfo)
|
|
return -ENOMEM;
|
|
newpoolinfo->mddev = mddev;
|
|
newpoolinfo->raid_disks = raid_disks;
|
|
|
|
newpool = mempool_create(NR_RAID1_BIOS, r1bio_pool_alloc,
|
|
r1bio_pool_free, newpoolinfo);
|
|
if (!newpool) {
|
|
kfree(newpoolinfo);
|
|
return -ENOMEM;
|
|
}
|
|
newmirrors = kzalloc(sizeof(struct mirror_info) * raid_disks, GFP_KERNEL);
|
|
if (!newmirrors) {
|
|
kfree(newpoolinfo);
|
|
mempool_destroy(newpool);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
raise_barrier(conf);
|
|
|
|
/* ok, everything is stopped */
|
|
oldpool = conf->r1bio_pool;
|
|
conf->r1bio_pool = newpool;
|
|
|
|
for (d = d2 = 0; d < conf->raid_disks; d++) {
|
|
mdk_rdev_t *rdev = conf->mirrors[d].rdev;
|
|
if (rdev && rdev->raid_disk != d2) {
|
|
sysfs_unlink_rdev(mddev, rdev);
|
|
rdev->raid_disk = d2;
|
|
sysfs_unlink_rdev(mddev, rdev);
|
|
if (sysfs_link_rdev(mddev, rdev))
|
|
printk(KERN_WARNING
|
|
"md/raid1:%s: cannot register rd%d\n",
|
|
mdname(mddev), rdev->raid_disk);
|
|
}
|
|
if (rdev)
|
|
newmirrors[d2++].rdev = rdev;
|
|
}
|
|
kfree(conf->mirrors);
|
|
conf->mirrors = newmirrors;
|
|
kfree(conf->poolinfo);
|
|
conf->poolinfo = newpoolinfo;
|
|
|
|
spin_lock_irqsave(&conf->device_lock, flags);
|
|
mddev->degraded += (raid_disks - conf->raid_disks);
|
|
spin_unlock_irqrestore(&conf->device_lock, flags);
|
|
conf->raid_disks = mddev->raid_disks = raid_disks;
|
|
mddev->delta_disks = 0;
|
|
|
|
conf->last_used = 0; /* just make sure it is in-range */
|
|
lower_barrier(conf);
|
|
|
|
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
|
|
md_wakeup_thread(mddev->thread);
|
|
|
|
mempool_destroy(oldpool);
|
|
return 0;
|
|
}
|
|
|
|
static void raid1_quiesce(mddev_t *mddev, int state)
|
|
{
|
|
conf_t *conf = mddev->private;
|
|
|
|
switch(state) {
|
|
case 2: /* wake for suspend */
|
|
wake_up(&conf->wait_barrier);
|
|
break;
|
|
case 1:
|
|
raise_barrier(conf);
|
|
break;
|
|
case 0:
|
|
lower_barrier(conf);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void *raid1_takeover(mddev_t *mddev)
|
|
{
|
|
/* raid1 can take over:
|
|
* raid5 with 2 devices, any layout or chunk size
|
|
*/
|
|
if (mddev->level == 5 && mddev->raid_disks == 2) {
|
|
conf_t *conf;
|
|
mddev->new_level = 1;
|
|
mddev->new_layout = 0;
|
|
mddev->new_chunk_sectors = 0;
|
|
conf = setup_conf(mddev);
|
|
if (!IS_ERR(conf))
|
|
conf->barrier = 1;
|
|
return conf;
|
|
}
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
static struct mdk_personality raid1_personality =
|
|
{
|
|
.name = "raid1",
|
|
.level = 1,
|
|
.owner = THIS_MODULE,
|
|
.make_request = make_request,
|
|
.run = run,
|
|
.stop = stop,
|
|
.status = status,
|
|
.error_handler = error,
|
|
.hot_add_disk = raid1_add_disk,
|
|
.hot_remove_disk= raid1_remove_disk,
|
|
.spare_active = raid1_spare_active,
|
|
.sync_request = sync_request,
|
|
.resize = raid1_resize,
|
|
.size = raid1_size,
|
|
.check_reshape = raid1_reshape,
|
|
.quiesce = raid1_quiesce,
|
|
.takeover = raid1_takeover,
|
|
};
|
|
|
|
static int __init raid_init(void)
|
|
{
|
|
return register_md_personality(&raid1_personality);
|
|
}
|
|
|
|
static void raid_exit(void)
|
|
{
|
|
unregister_md_personality(&raid1_personality);
|
|
}
|
|
|
|
module_init(raid_init);
|
|
module_exit(raid_exit);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("RAID1 (mirroring) personality for MD");
|
|
MODULE_ALIAS("md-personality-3"); /* RAID1 */
|
|
MODULE_ALIAS("md-raid1");
|
|
MODULE_ALIAS("md-level-1");
|