mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 16:29:59 +00:00
![Steve Longerbeam](/assets/img/avatar_default.png)
csi2_set_fmt() was setting the try_fmt only on the first pad, and pad index was ignored. Fix by introducing __csi2_get_fmt(). Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
705 lines
17 KiB
C
705 lines
17 KiB
C
/*
|
|
* MIPI CSI-2 Receiver Subdev for Freescale i.MX6 SOC.
|
|
*
|
|
* Copyright (c) 2012-2017 Mentor Graphics Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_graph.h>
|
|
#include <linux/platform_device.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-fwnode.h>
|
|
#include <media/v4l2-subdev.h>
|
|
#include "imx-media.h"
|
|
|
|
/*
|
|
* there must be 5 pads: 1 input pad from sensor, and
|
|
* the 4 virtual channel output pads
|
|
*/
|
|
#define CSI2_SINK_PAD 0
|
|
#define CSI2_NUM_SINK_PADS 1
|
|
#define CSI2_NUM_SRC_PADS 4
|
|
#define CSI2_NUM_PADS 5
|
|
|
|
/*
|
|
* The default maximum bit-rate per lane in Mbps, if the
|
|
* source subdev does not provide V4L2_CID_LINK_FREQ.
|
|
*/
|
|
#define CSI2_DEFAULT_MAX_MBPS 849
|
|
|
|
struct csi2_dev {
|
|
struct device *dev;
|
|
struct v4l2_subdev sd;
|
|
struct media_pad pad[CSI2_NUM_PADS];
|
|
struct clk *dphy_clk;
|
|
struct clk *pllref_clk;
|
|
struct clk *pix_clk; /* what is this? */
|
|
void __iomem *base;
|
|
struct v4l2_fwnode_bus_mipi_csi2 bus;
|
|
|
|
/* lock to protect all members below */
|
|
struct mutex lock;
|
|
|
|
struct v4l2_mbus_framefmt format_mbus;
|
|
|
|
int stream_count;
|
|
struct v4l2_subdev *src_sd;
|
|
bool sink_linked[CSI2_NUM_SRC_PADS];
|
|
};
|
|
|
|
#define DEVICE_NAME "imx6-mipi-csi2"
|
|
|
|
/* Register offsets */
|
|
#define CSI2_VERSION 0x000
|
|
#define CSI2_N_LANES 0x004
|
|
#define CSI2_PHY_SHUTDOWNZ 0x008
|
|
#define CSI2_DPHY_RSTZ 0x00c
|
|
#define CSI2_RESETN 0x010
|
|
#define CSI2_PHY_STATE 0x014
|
|
#define PHY_STOPSTATEDATA_BIT 4
|
|
#define PHY_STOPSTATEDATA(n) BIT(PHY_STOPSTATEDATA_BIT + (n))
|
|
#define PHY_RXCLKACTIVEHS BIT(8)
|
|
#define PHY_RXULPSCLKNOT BIT(9)
|
|
#define PHY_STOPSTATECLK BIT(10)
|
|
#define CSI2_DATA_IDS_1 0x018
|
|
#define CSI2_DATA_IDS_2 0x01c
|
|
#define CSI2_ERR1 0x020
|
|
#define CSI2_ERR2 0x024
|
|
#define CSI2_MSK1 0x028
|
|
#define CSI2_MSK2 0x02c
|
|
#define CSI2_PHY_TST_CTRL0 0x030
|
|
#define PHY_TESTCLR BIT(0)
|
|
#define PHY_TESTCLK BIT(1)
|
|
#define CSI2_PHY_TST_CTRL1 0x034
|
|
#define PHY_TESTEN BIT(16)
|
|
/*
|
|
* i.MX CSI2IPU Gasket registers follow. The CSI2IPU gasket is
|
|
* not part of the MIPI CSI-2 core, but its registers fall in the
|
|
* same register map range.
|
|
*/
|
|
#define CSI2IPU_GASKET 0xf00
|
|
#define CSI2IPU_YUV422_YUYV BIT(2)
|
|
|
|
static inline struct csi2_dev *sd_to_dev(struct v4l2_subdev *sdev)
|
|
{
|
|
return container_of(sdev, struct csi2_dev, sd);
|
|
}
|
|
|
|
/*
|
|
* The required sequence of MIPI CSI-2 startup as specified in the i.MX6
|
|
* reference manual is as follows:
|
|
*
|
|
* 1. Deassert presetn signal (global reset).
|
|
* It's not clear what this "global reset" signal is (maybe APB
|
|
* global reset), but in any case this step would be probably
|
|
* be carried out during driver load in csi2_probe().
|
|
*
|
|
* 2. Configure MIPI Camera Sensor to put all Tx lanes in LP-11 state.
|
|
* This must be carried out by the MIPI sensor's s_power(ON) subdev
|
|
* op.
|
|
*
|
|
* 3. D-PHY initialization.
|
|
* 4. CSI2 Controller programming (Set N_LANES, deassert PHY_SHUTDOWNZ,
|
|
* deassert PHY_RSTZ, deassert CSI2_RESETN).
|
|
* 5. Read the PHY status register (PHY_STATE) to confirm that all data and
|
|
* clock lanes of the D-PHY are in LP-11 state.
|
|
* 6. Configure the MIPI Camera Sensor to start transmitting a clock on the
|
|
* D-PHY clock lane.
|
|
* 7. CSI2 Controller programming - Read the PHY status register (PHY_STATE)
|
|
* to confirm that the D-PHY is receiving a clock on the D-PHY clock lane.
|
|
*
|
|
* All steps 3 through 7 are carried out by csi2_s_stream(ON) here. Step
|
|
* 6 is accomplished by calling the source subdev's s_stream(ON) between
|
|
* steps 5 and 7.
|
|
*/
|
|
|
|
static void csi2_enable(struct csi2_dev *csi2, bool enable)
|
|
{
|
|
if (enable) {
|
|
writel(0x1, csi2->base + CSI2_PHY_SHUTDOWNZ);
|
|
writel(0x1, csi2->base + CSI2_DPHY_RSTZ);
|
|
writel(0x1, csi2->base + CSI2_RESETN);
|
|
} else {
|
|
writel(0x0, csi2->base + CSI2_PHY_SHUTDOWNZ);
|
|
writel(0x0, csi2->base + CSI2_DPHY_RSTZ);
|
|
writel(0x0, csi2->base + CSI2_RESETN);
|
|
}
|
|
}
|
|
|
|
static void csi2_set_lanes(struct csi2_dev *csi2)
|
|
{
|
|
int lanes = csi2->bus.num_data_lanes;
|
|
|
|
writel(lanes - 1, csi2->base + CSI2_N_LANES);
|
|
}
|
|
|
|
static void dw_mipi_csi2_phy_write(struct csi2_dev *csi2,
|
|
u32 test_code, u32 test_data)
|
|
{
|
|
/* Clear PHY test interface */
|
|
writel(PHY_TESTCLR, csi2->base + CSI2_PHY_TST_CTRL0);
|
|
writel(0x0, csi2->base + CSI2_PHY_TST_CTRL1);
|
|
writel(0x0, csi2->base + CSI2_PHY_TST_CTRL0);
|
|
|
|
/* Raise test interface strobe signal */
|
|
writel(PHY_TESTCLK, csi2->base + CSI2_PHY_TST_CTRL0);
|
|
|
|
/* Configure address write on falling edge and lower strobe signal */
|
|
writel(PHY_TESTEN | test_code, csi2->base + CSI2_PHY_TST_CTRL1);
|
|
writel(0x0, csi2->base + CSI2_PHY_TST_CTRL0);
|
|
|
|
/* Configure data write on rising edge and raise strobe signal */
|
|
writel(test_data, csi2->base + CSI2_PHY_TST_CTRL1);
|
|
writel(PHY_TESTCLK, csi2->base + CSI2_PHY_TST_CTRL0);
|
|
|
|
/* Clear strobe signal */
|
|
writel(0x0, csi2->base + CSI2_PHY_TST_CTRL0);
|
|
}
|
|
|
|
/*
|
|
* This table is based on the table documented at
|
|
* https://community.nxp.com/docs/DOC-94312. It assumes
|
|
* a 27MHz D-PHY pll reference clock.
|
|
*/
|
|
static const struct {
|
|
u32 max_mbps;
|
|
u32 hsfreqrange_sel;
|
|
} hsfreq_map[] = {
|
|
{ 90, 0x00}, {100, 0x20}, {110, 0x40}, {125, 0x02},
|
|
{140, 0x22}, {150, 0x42}, {160, 0x04}, {180, 0x24},
|
|
{200, 0x44}, {210, 0x06}, {240, 0x26}, {250, 0x46},
|
|
{270, 0x08}, {300, 0x28}, {330, 0x48}, {360, 0x2a},
|
|
{400, 0x4a}, {450, 0x0c}, {500, 0x2c}, {550, 0x0e},
|
|
{600, 0x2e}, {650, 0x10}, {700, 0x30}, {750, 0x12},
|
|
{800, 0x32}, {850, 0x14}, {900, 0x34}, {950, 0x54},
|
|
{1000, 0x74},
|
|
};
|
|
|
|
static int max_mbps_to_hsfreqrange_sel(u32 max_mbps)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(hsfreq_map); i++)
|
|
if (hsfreq_map[i].max_mbps > max_mbps)
|
|
return hsfreq_map[i].hsfreqrange_sel;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int csi2_dphy_init(struct csi2_dev *csi2)
|
|
{
|
|
struct v4l2_ctrl *ctrl;
|
|
u32 mbps_per_lane;
|
|
int sel;
|
|
|
|
ctrl = v4l2_ctrl_find(csi2->src_sd->ctrl_handler,
|
|
V4L2_CID_LINK_FREQ);
|
|
if (!ctrl)
|
|
mbps_per_lane = CSI2_DEFAULT_MAX_MBPS;
|
|
else
|
|
mbps_per_lane = DIV_ROUND_UP_ULL(2 * ctrl->qmenu_int[ctrl->val],
|
|
USEC_PER_SEC);
|
|
|
|
sel = max_mbps_to_hsfreqrange_sel(mbps_per_lane);
|
|
if (sel < 0)
|
|
return sel;
|
|
|
|
dw_mipi_csi2_phy_write(csi2, 0x44, sel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Waits for ultra-low-power state on D-PHY clock lane. This is currently
|
|
* unused and may not be needed at all, but keep around just in case.
|
|
*/
|
|
static int __maybe_unused csi2_dphy_wait_ulp(struct csi2_dev *csi2)
|
|
{
|
|
u32 reg;
|
|
int ret;
|
|
|
|
/* wait for ULP on clock lane */
|
|
ret = readl_poll_timeout(csi2->base + CSI2_PHY_STATE, reg,
|
|
!(reg & PHY_RXULPSCLKNOT), 0, 500000);
|
|
if (ret) {
|
|
v4l2_err(&csi2->sd, "ULP timeout, phy_state = 0x%08x\n", reg);
|
|
return ret;
|
|
}
|
|
|
|
/* wait until no errors on bus */
|
|
ret = readl_poll_timeout(csi2->base + CSI2_ERR1, reg,
|
|
reg == 0x0, 0, 500000);
|
|
if (ret) {
|
|
v4l2_err(&csi2->sd, "stable bus timeout, err1 = 0x%08x\n", reg);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Waits for low-power LP-11 state on data and clock lanes. */
|
|
static int csi2_dphy_wait_stopstate(struct csi2_dev *csi2)
|
|
{
|
|
u32 mask, reg;
|
|
int ret;
|
|
|
|
mask = PHY_STOPSTATECLK | (((1 << csi2->bus.num_data_lanes) - 1) <<
|
|
PHY_STOPSTATEDATA_BIT);
|
|
|
|
ret = readl_poll_timeout(csi2->base + CSI2_PHY_STATE, reg,
|
|
(reg & mask) == mask, 0, 500000);
|
|
if (ret) {
|
|
v4l2_err(&csi2->sd, "LP-11 timeout, phy_state = 0x%08x\n", reg);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Wait for active clock on the clock lane. */
|
|
static int csi2_dphy_wait_clock_lane(struct csi2_dev *csi2)
|
|
{
|
|
u32 reg;
|
|
int ret;
|
|
|
|
ret = readl_poll_timeout(csi2->base + CSI2_PHY_STATE, reg,
|
|
(reg & PHY_RXCLKACTIVEHS), 0, 500000);
|
|
if (ret) {
|
|
v4l2_err(&csi2->sd, "clock lane timeout, phy_state = 0x%08x\n",
|
|
reg);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Setup the i.MX CSI2IPU Gasket */
|
|
static void csi2ipu_gasket_init(struct csi2_dev *csi2)
|
|
{
|
|
u32 reg = 0;
|
|
|
|
switch (csi2->format_mbus.code) {
|
|
case MEDIA_BUS_FMT_YUYV8_2X8:
|
|
case MEDIA_BUS_FMT_YUYV8_1X16:
|
|
reg = CSI2IPU_YUV422_YUYV;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
writel(reg, csi2->base + CSI2IPU_GASKET);
|
|
}
|
|
|
|
static int csi2_start(struct csi2_dev *csi2)
|
|
{
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(csi2->pix_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* setup the gasket */
|
|
csi2ipu_gasket_init(csi2);
|
|
|
|
/* Step 3 */
|
|
ret = csi2_dphy_init(csi2);
|
|
if (ret)
|
|
goto err_disable_clk;
|
|
|
|
/* Step 4 */
|
|
csi2_set_lanes(csi2);
|
|
csi2_enable(csi2, true);
|
|
|
|
/* Step 5 */
|
|
ret = csi2_dphy_wait_stopstate(csi2);
|
|
if (ret)
|
|
goto err_assert_reset;
|
|
|
|
/* Step 6 */
|
|
ret = v4l2_subdev_call(csi2->src_sd, video, s_stream, 1);
|
|
ret = (ret && ret != -ENOIOCTLCMD) ? ret : 0;
|
|
if (ret)
|
|
goto err_assert_reset;
|
|
|
|
/* Step 7 */
|
|
ret = csi2_dphy_wait_clock_lane(csi2);
|
|
if (ret)
|
|
goto err_stop_upstream;
|
|
|
|
return 0;
|
|
|
|
err_stop_upstream:
|
|
v4l2_subdev_call(csi2->src_sd, video, s_stream, 0);
|
|
err_assert_reset:
|
|
csi2_enable(csi2, false);
|
|
err_disable_clk:
|
|
clk_disable_unprepare(csi2->pix_clk);
|
|
return ret;
|
|
}
|
|
|
|
static void csi2_stop(struct csi2_dev *csi2)
|
|
{
|
|
/* stop upstream */
|
|
v4l2_subdev_call(csi2->src_sd, video, s_stream, 0);
|
|
|
|
csi2_enable(csi2, false);
|
|
clk_disable_unprepare(csi2->pix_clk);
|
|
}
|
|
|
|
/*
|
|
* V4L2 subdev operations.
|
|
*/
|
|
|
|
static int csi2_s_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct csi2_dev *csi2 = sd_to_dev(sd);
|
|
int i, ret = 0;
|
|
|
|
mutex_lock(&csi2->lock);
|
|
|
|
if (!csi2->src_sd) {
|
|
ret = -EPIPE;
|
|
goto out;
|
|
}
|
|
|
|
for (i = 0; i < CSI2_NUM_SRC_PADS; i++) {
|
|
if (csi2->sink_linked[i])
|
|
break;
|
|
}
|
|
if (i >= CSI2_NUM_SRC_PADS) {
|
|
ret = -EPIPE;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* enable/disable streaming only if stream_count is
|
|
* going from 0 to 1 / 1 to 0.
|
|
*/
|
|
if (csi2->stream_count != !enable)
|
|
goto update_count;
|
|
|
|
dev_dbg(csi2->dev, "stream %s\n", enable ? "ON" : "OFF");
|
|
if (enable)
|
|
ret = csi2_start(csi2);
|
|
else
|
|
csi2_stop(csi2);
|
|
if (ret)
|
|
goto out;
|
|
|
|
update_count:
|
|
csi2->stream_count += enable ? 1 : -1;
|
|
if (csi2->stream_count < 0)
|
|
csi2->stream_count = 0;
|
|
out:
|
|
mutex_unlock(&csi2->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int csi2_link_setup(struct media_entity *entity,
|
|
const struct media_pad *local,
|
|
const struct media_pad *remote, u32 flags)
|
|
{
|
|
struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
|
|
struct csi2_dev *csi2 = sd_to_dev(sd);
|
|
struct v4l2_subdev *remote_sd;
|
|
int ret = 0;
|
|
|
|
dev_dbg(csi2->dev, "link setup %s -> %s", remote->entity->name,
|
|
local->entity->name);
|
|
|
|
remote_sd = media_entity_to_v4l2_subdev(remote->entity);
|
|
|
|
mutex_lock(&csi2->lock);
|
|
|
|
if (local->flags & MEDIA_PAD_FL_SOURCE) {
|
|
if (flags & MEDIA_LNK_FL_ENABLED) {
|
|
if (csi2->sink_linked[local->index - 1]) {
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
csi2->sink_linked[local->index - 1] = true;
|
|
} else {
|
|
csi2->sink_linked[local->index - 1] = false;
|
|
}
|
|
} else {
|
|
if (flags & MEDIA_LNK_FL_ENABLED) {
|
|
if (csi2->src_sd) {
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
csi2->src_sd = remote_sd;
|
|
} else {
|
|
csi2->src_sd = NULL;
|
|
}
|
|
}
|
|
|
|
out:
|
|
mutex_unlock(&csi2->lock);
|
|
return ret;
|
|
}
|
|
|
|
static struct v4l2_mbus_framefmt *
|
|
__csi2_get_fmt(struct csi2_dev *csi2, struct v4l2_subdev_pad_config *cfg,
|
|
unsigned int pad, enum v4l2_subdev_format_whence which)
|
|
{
|
|
if (which == V4L2_SUBDEV_FORMAT_TRY)
|
|
return v4l2_subdev_get_try_format(&csi2->sd, cfg, pad);
|
|
else
|
|
return &csi2->format_mbus;
|
|
}
|
|
|
|
static int csi2_get_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *sdformat)
|
|
{
|
|
struct csi2_dev *csi2 = sd_to_dev(sd);
|
|
struct v4l2_mbus_framefmt *fmt;
|
|
|
|
mutex_lock(&csi2->lock);
|
|
|
|
fmt = __csi2_get_fmt(csi2, cfg, sdformat->pad, sdformat->which);
|
|
|
|
sdformat->format = *fmt;
|
|
|
|
mutex_unlock(&csi2->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int csi2_set_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *sdformat)
|
|
{
|
|
struct csi2_dev *csi2 = sd_to_dev(sd);
|
|
struct v4l2_mbus_framefmt *fmt;
|
|
int ret = 0;
|
|
|
|
if (sdformat->pad >= CSI2_NUM_PADS)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&csi2->lock);
|
|
|
|
if (csi2->stream_count > 0) {
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
/* Output pads mirror active input pad, no limits on input pads */
|
|
if (sdformat->pad != CSI2_SINK_PAD)
|
|
sdformat->format = csi2->format_mbus;
|
|
|
|
fmt = __csi2_get_fmt(csi2, cfg, sdformat->pad, sdformat->which);
|
|
|
|
*fmt = sdformat->format;
|
|
out:
|
|
mutex_unlock(&csi2->lock);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* retrieve our pads parsed from the OF graph by the media device
|
|
*/
|
|
static int csi2_registered(struct v4l2_subdev *sd)
|
|
{
|
|
struct csi2_dev *csi2 = sd_to_dev(sd);
|
|
int i, ret;
|
|
|
|
for (i = 0; i < CSI2_NUM_PADS; i++) {
|
|
csi2->pad[i].flags = (i == CSI2_SINK_PAD) ?
|
|
MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE;
|
|
}
|
|
|
|
/* set a default mbus format */
|
|
ret = imx_media_init_mbus_fmt(&csi2->format_mbus,
|
|
640, 480, 0, V4L2_FIELD_NONE, NULL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return media_entity_pads_init(&sd->entity, CSI2_NUM_PADS, csi2->pad);
|
|
}
|
|
|
|
static const struct media_entity_operations csi2_entity_ops = {
|
|
.link_setup = csi2_link_setup,
|
|
.link_validate = v4l2_subdev_link_validate,
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops csi2_video_ops = {
|
|
.s_stream = csi2_s_stream,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops csi2_pad_ops = {
|
|
.init_cfg = imx_media_init_cfg,
|
|
.get_fmt = csi2_get_fmt,
|
|
.set_fmt = csi2_set_fmt,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops csi2_subdev_ops = {
|
|
.video = &csi2_video_ops,
|
|
.pad = &csi2_pad_ops,
|
|
};
|
|
|
|
static const struct v4l2_subdev_internal_ops csi2_internal_ops = {
|
|
.registered = csi2_registered,
|
|
};
|
|
|
|
static int csi2_parse_endpoints(struct csi2_dev *csi2)
|
|
{
|
|
struct device_node *node = csi2->dev->of_node;
|
|
struct device_node *epnode;
|
|
struct v4l2_fwnode_endpoint ep;
|
|
|
|
epnode = of_graph_get_endpoint_by_regs(node, 0, -1);
|
|
if (!epnode) {
|
|
v4l2_err(&csi2->sd, "failed to get sink endpoint node\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
v4l2_fwnode_endpoint_parse(of_fwnode_handle(epnode), &ep);
|
|
of_node_put(epnode);
|
|
|
|
if (ep.bus_type != V4L2_MBUS_CSI2) {
|
|
v4l2_err(&csi2->sd, "invalid bus type, must be MIPI CSI2\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
csi2->bus = ep.bus.mipi_csi2;
|
|
|
|
dev_dbg(csi2->dev, "data lanes: %d\n", csi2->bus.num_data_lanes);
|
|
dev_dbg(csi2->dev, "flags: 0x%08x\n", csi2->bus.flags);
|
|
return 0;
|
|
}
|
|
|
|
static int csi2_probe(struct platform_device *pdev)
|
|
{
|
|
struct csi2_dev *csi2;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
csi2 = devm_kzalloc(&pdev->dev, sizeof(*csi2), GFP_KERNEL);
|
|
if (!csi2)
|
|
return -ENOMEM;
|
|
|
|
csi2->dev = &pdev->dev;
|
|
|
|
v4l2_subdev_init(&csi2->sd, &csi2_subdev_ops);
|
|
v4l2_set_subdevdata(&csi2->sd, &pdev->dev);
|
|
csi2->sd.internal_ops = &csi2_internal_ops;
|
|
csi2->sd.entity.ops = &csi2_entity_ops;
|
|
csi2->sd.dev = &pdev->dev;
|
|
csi2->sd.owner = THIS_MODULE;
|
|
csi2->sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
strcpy(csi2->sd.name, DEVICE_NAME);
|
|
csi2->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
|
|
csi2->sd.grp_id = IMX_MEDIA_GRP_ID_CSI2;
|
|
|
|
ret = csi2_parse_endpoints(csi2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
csi2->pllref_clk = devm_clk_get(&pdev->dev, "ref");
|
|
if (IS_ERR(csi2->pllref_clk)) {
|
|
v4l2_err(&csi2->sd, "failed to get pll reference clock\n");
|
|
ret = PTR_ERR(csi2->pllref_clk);
|
|
return ret;
|
|
}
|
|
|
|
csi2->dphy_clk = devm_clk_get(&pdev->dev, "dphy");
|
|
if (IS_ERR(csi2->dphy_clk)) {
|
|
v4l2_err(&csi2->sd, "failed to get dphy clock\n");
|
|
ret = PTR_ERR(csi2->dphy_clk);
|
|
return ret;
|
|
}
|
|
|
|
csi2->pix_clk = devm_clk_get(&pdev->dev, "pix");
|
|
if (IS_ERR(csi2->pix_clk)) {
|
|
v4l2_err(&csi2->sd, "failed to get pixel clock\n");
|
|
ret = PTR_ERR(csi2->pix_clk);
|
|
return ret;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
v4l2_err(&csi2->sd, "failed to get platform resources\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
csi2->base = devm_ioremap(&pdev->dev, res->start, PAGE_SIZE);
|
|
if (!csi2->base) {
|
|
v4l2_err(&csi2->sd, "failed to map CSI-2 registers\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
mutex_init(&csi2->lock);
|
|
|
|
ret = clk_prepare_enable(csi2->pllref_clk);
|
|
if (ret) {
|
|
v4l2_err(&csi2->sd, "failed to enable pllref_clk\n");
|
|
goto rmmutex;
|
|
}
|
|
|
|
ret = clk_prepare_enable(csi2->dphy_clk);
|
|
if (ret) {
|
|
v4l2_err(&csi2->sd, "failed to enable dphy_clk\n");
|
|
goto pllref_off;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, &csi2->sd);
|
|
|
|
ret = v4l2_async_register_subdev(&csi2->sd);
|
|
if (ret)
|
|
goto dphy_off;
|
|
|
|
return 0;
|
|
|
|
dphy_off:
|
|
clk_disable_unprepare(csi2->dphy_clk);
|
|
pllref_off:
|
|
clk_disable_unprepare(csi2->pllref_clk);
|
|
rmmutex:
|
|
mutex_destroy(&csi2->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int csi2_remove(struct platform_device *pdev)
|
|
{
|
|
struct v4l2_subdev *sd = platform_get_drvdata(pdev);
|
|
struct csi2_dev *csi2 = sd_to_dev(sd);
|
|
|
|
v4l2_async_unregister_subdev(sd);
|
|
clk_disable_unprepare(csi2->dphy_clk);
|
|
clk_disable_unprepare(csi2->pllref_clk);
|
|
mutex_destroy(&csi2->lock);
|
|
media_entity_cleanup(&sd->entity);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id csi2_dt_ids[] = {
|
|
{ .compatible = "fsl,imx6-mipi-csi2", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, csi2_dt_ids);
|
|
|
|
static struct platform_driver csi2_driver = {
|
|
.driver = {
|
|
.name = DEVICE_NAME,
|
|
.of_match_table = csi2_dt_ids,
|
|
},
|
|
.probe = csi2_probe,
|
|
.remove = csi2_remove,
|
|
};
|
|
|
|
module_platform_driver(csi2_driver);
|
|
|
|
MODULE_DESCRIPTION("i.MX5/6 MIPI CSI-2 Receiver driver");
|
|
MODULE_AUTHOR("Steve Longerbeam <steve_longerbeam@mentor.com>");
|
|
MODULE_LICENSE("GPL");
|