mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 16:29:59 +00:00
![Hans Verkuil](/assets/img/avatar_default.png)
This driver is unused and depends on the deprecated soc-camera framework. Move it to staging in preparation for being removed unless someone does the work to convert it to a proper V4L2 subdev driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
858 lines
23 KiB
C
858 lines
23 KiB
C
/*
|
|
* Driver for MT9T031 CMOS Image Sensor from Micron
|
|
*
|
|
* Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering <lg@denx.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/v4l2-mediabus.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <media/soc_camera.h>
|
|
#include <media/v4l2-clk.h>
|
|
#include <media/v4l2-subdev.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
|
|
/*
|
|
* ATTENTION: this driver still cannot be used outside of the soc-camera
|
|
* framework because of its PM implementation, using the video_device node.
|
|
* If hardware becomes available for testing, alternative PM approaches shall
|
|
* be considered and tested.
|
|
*/
|
|
|
|
/*
|
|
* mt9t031 i2c address 0x5d
|
|
* The platform has to define struct i2c_board_info objects and link to them
|
|
* from struct soc_camera_host_desc
|
|
*/
|
|
|
|
/* mt9t031 selected register addresses */
|
|
#define MT9T031_CHIP_VERSION 0x00
|
|
#define MT9T031_ROW_START 0x01
|
|
#define MT9T031_COLUMN_START 0x02
|
|
#define MT9T031_WINDOW_HEIGHT 0x03
|
|
#define MT9T031_WINDOW_WIDTH 0x04
|
|
#define MT9T031_HORIZONTAL_BLANKING 0x05
|
|
#define MT9T031_VERTICAL_BLANKING 0x06
|
|
#define MT9T031_OUTPUT_CONTROL 0x07
|
|
#define MT9T031_SHUTTER_WIDTH_UPPER 0x08
|
|
#define MT9T031_SHUTTER_WIDTH 0x09
|
|
#define MT9T031_PIXEL_CLOCK_CONTROL 0x0a
|
|
#define MT9T031_FRAME_RESTART 0x0b
|
|
#define MT9T031_SHUTTER_DELAY 0x0c
|
|
#define MT9T031_RESET 0x0d
|
|
#define MT9T031_READ_MODE_1 0x1e
|
|
#define MT9T031_READ_MODE_2 0x20
|
|
#define MT9T031_READ_MODE_3 0x21
|
|
#define MT9T031_ROW_ADDRESS_MODE 0x22
|
|
#define MT9T031_COLUMN_ADDRESS_MODE 0x23
|
|
#define MT9T031_GLOBAL_GAIN 0x35
|
|
#define MT9T031_CHIP_ENABLE 0xF8
|
|
|
|
#define MT9T031_MAX_HEIGHT 1536
|
|
#define MT9T031_MAX_WIDTH 2048
|
|
#define MT9T031_MIN_HEIGHT 2
|
|
#define MT9T031_MIN_WIDTH 18
|
|
#define MT9T031_HORIZONTAL_BLANK 142
|
|
#define MT9T031_VERTICAL_BLANK 25
|
|
#define MT9T031_COLUMN_SKIP 32
|
|
#define MT9T031_ROW_SKIP 20
|
|
|
|
struct mt9t031 {
|
|
struct v4l2_subdev subdev;
|
|
struct v4l2_ctrl_handler hdl;
|
|
struct {
|
|
/* exposure/auto-exposure cluster */
|
|
struct v4l2_ctrl *autoexposure;
|
|
struct v4l2_ctrl *exposure;
|
|
};
|
|
struct v4l2_rect rect; /* Sensor window */
|
|
struct v4l2_clk *clk;
|
|
u16 xskip;
|
|
u16 yskip;
|
|
unsigned int total_h;
|
|
unsigned short y_skip_top; /* Lines to skip at the top */
|
|
};
|
|
|
|
static struct mt9t031 *to_mt9t031(const struct i2c_client *client)
|
|
{
|
|
return container_of(i2c_get_clientdata(client), struct mt9t031, subdev);
|
|
}
|
|
|
|
static int reg_read(struct i2c_client *client, const u8 reg)
|
|
{
|
|
return i2c_smbus_read_word_swapped(client, reg);
|
|
}
|
|
|
|
static int reg_write(struct i2c_client *client, const u8 reg,
|
|
const u16 data)
|
|
{
|
|
return i2c_smbus_write_word_swapped(client, reg, data);
|
|
}
|
|
|
|
static int reg_set(struct i2c_client *client, const u8 reg,
|
|
const u16 data)
|
|
{
|
|
int ret;
|
|
|
|
ret = reg_read(client, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
return reg_write(client, reg, ret | data);
|
|
}
|
|
|
|
static int reg_clear(struct i2c_client *client, const u8 reg,
|
|
const u16 data)
|
|
{
|
|
int ret;
|
|
|
|
ret = reg_read(client, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
return reg_write(client, reg, ret & ~data);
|
|
}
|
|
|
|
static int set_shutter(struct i2c_client *client, const u32 data)
|
|
{
|
|
int ret;
|
|
|
|
ret = reg_write(client, MT9T031_SHUTTER_WIDTH_UPPER, data >> 16);
|
|
|
|
if (ret >= 0)
|
|
ret = reg_write(client, MT9T031_SHUTTER_WIDTH, data & 0xffff);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int get_shutter(struct i2c_client *client, u32 *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = reg_read(client, MT9T031_SHUTTER_WIDTH_UPPER);
|
|
*data = ret << 16;
|
|
|
|
if (ret >= 0)
|
|
ret = reg_read(client, MT9T031_SHUTTER_WIDTH);
|
|
*data |= ret & 0xffff;
|
|
|
|
return ret < 0 ? ret : 0;
|
|
}
|
|
|
|
static int mt9t031_idle(struct i2c_client *client)
|
|
{
|
|
int ret;
|
|
|
|
/* Disable chip output, synchronous option update */
|
|
ret = reg_write(client, MT9T031_RESET, 1);
|
|
if (ret >= 0)
|
|
ret = reg_write(client, MT9T031_RESET, 0);
|
|
if (ret >= 0)
|
|
ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 2);
|
|
|
|
return ret >= 0 ? 0 : -EIO;
|
|
}
|
|
|
|
static int mt9t031_s_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
int ret;
|
|
|
|
if (enable)
|
|
/* Switch to master "normal" mode */
|
|
ret = reg_set(client, MT9T031_OUTPUT_CONTROL, 2);
|
|
else
|
|
/* Stop sensor readout */
|
|
ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 2);
|
|
|
|
if (ret < 0)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* target must be _even_ */
|
|
static u16 mt9t031_skip(s32 *source, s32 target, s32 max)
|
|
{
|
|
unsigned int skip;
|
|
|
|
if (*source < target + target / 2) {
|
|
*source = target;
|
|
return 1;
|
|
}
|
|
|
|
skip = min(max, *source + target / 2) / target;
|
|
if (skip > 8)
|
|
skip = 8;
|
|
*source = target * skip;
|
|
|
|
return skip;
|
|
}
|
|
|
|
/* rect is the sensor rectangle, the caller guarantees parameter validity */
|
|
static int mt9t031_set_params(struct i2c_client *client,
|
|
struct v4l2_rect *rect, u16 xskip, u16 yskip)
|
|
{
|
|
struct mt9t031 *mt9t031 = to_mt9t031(client);
|
|
int ret;
|
|
u16 xbin, ybin;
|
|
const u16 hblank = MT9T031_HORIZONTAL_BLANK,
|
|
vblank = MT9T031_VERTICAL_BLANK;
|
|
|
|
xbin = min(xskip, (u16)3);
|
|
ybin = min(yskip, (u16)3);
|
|
|
|
/*
|
|
* Could just do roundup(rect->left, [xy]bin * 2); but this is cheaper.
|
|
* There is always a valid suitably aligned value. The worst case is
|
|
* xbin = 3, width = 2048. Then we will start at 36, the last read out
|
|
* pixel will be 2083, which is < 2085 - first black pixel.
|
|
*
|
|
* MT9T031 datasheet imposes window left border alignment, depending on
|
|
* the selected xskip. Failing to conform to this requirement produces
|
|
* dark horizontal stripes in the image. However, even obeying to this
|
|
* requirement doesn't eliminate the stripes in all configurations. They
|
|
* appear "locally reproducibly," but can differ between tests under
|
|
* different lighting conditions.
|
|
*/
|
|
switch (xbin) {
|
|
case 1:
|
|
rect->left &= ~1;
|
|
break;
|
|
case 2:
|
|
rect->left &= ~3;
|
|
break;
|
|
case 3:
|
|
rect->left = rect->left > roundup(MT9T031_COLUMN_SKIP, 6) ?
|
|
(rect->left / 6) * 6 : roundup(MT9T031_COLUMN_SKIP, 6);
|
|
}
|
|
|
|
rect->top &= ~1;
|
|
|
|
dev_dbg(&client->dev, "skip %u:%u, rect %ux%u@%u:%u\n",
|
|
xskip, yskip, rect->width, rect->height, rect->left, rect->top);
|
|
|
|
/* Disable register update, reconfigure atomically */
|
|
ret = reg_set(client, MT9T031_OUTPUT_CONTROL, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Blanking and start values - default... */
|
|
ret = reg_write(client, MT9T031_HORIZONTAL_BLANKING, hblank);
|
|
if (ret >= 0)
|
|
ret = reg_write(client, MT9T031_VERTICAL_BLANKING, vblank);
|
|
|
|
if (yskip != mt9t031->yskip || xskip != mt9t031->xskip) {
|
|
/* Binning, skipping */
|
|
if (ret >= 0)
|
|
ret = reg_write(client, MT9T031_COLUMN_ADDRESS_MODE,
|
|
((xbin - 1) << 4) | (xskip - 1));
|
|
if (ret >= 0)
|
|
ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE,
|
|
((ybin - 1) << 4) | (yskip - 1));
|
|
}
|
|
dev_dbg(&client->dev, "new physical left %u, top %u\n",
|
|
rect->left, rect->top);
|
|
|
|
/*
|
|
* The caller provides a supported format, as guaranteed by
|
|
* .set_fmt(FORMAT_TRY), soc_camera_s_selection() and soc_camera_cropcap()
|
|
*/
|
|
if (ret >= 0)
|
|
ret = reg_write(client, MT9T031_COLUMN_START, rect->left);
|
|
if (ret >= 0)
|
|
ret = reg_write(client, MT9T031_ROW_START, rect->top);
|
|
if (ret >= 0)
|
|
ret = reg_write(client, MT9T031_WINDOW_WIDTH, rect->width - 1);
|
|
if (ret >= 0)
|
|
ret = reg_write(client, MT9T031_WINDOW_HEIGHT,
|
|
rect->height + mt9t031->y_skip_top - 1);
|
|
if (ret >= 0 && v4l2_ctrl_g_ctrl(mt9t031->autoexposure) == V4L2_EXPOSURE_AUTO) {
|
|
mt9t031->total_h = rect->height + mt9t031->y_skip_top + vblank;
|
|
|
|
ret = set_shutter(client, mt9t031->total_h);
|
|
}
|
|
|
|
/* Re-enable register update, commit all changes */
|
|
if (ret >= 0)
|
|
ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 1);
|
|
|
|
if (ret >= 0) {
|
|
mt9t031->rect = *rect;
|
|
mt9t031->xskip = xskip;
|
|
mt9t031->yskip = yskip;
|
|
}
|
|
|
|
return ret < 0 ? ret : 0;
|
|
}
|
|
|
|
static int mt9t031_set_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9t031 *mt9t031 = to_mt9t031(client);
|
|
struct v4l2_rect rect = sel->r;
|
|
|
|
if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
|
|
sel->target != V4L2_SEL_TGT_CROP)
|
|
return -EINVAL;
|
|
|
|
rect.width = ALIGN(rect.width, 2);
|
|
rect.height = ALIGN(rect.height, 2);
|
|
|
|
soc_camera_limit_side(&rect.left, &rect.width,
|
|
MT9T031_COLUMN_SKIP, MT9T031_MIN_WIDTH, MT9T031_MAX_WIDTH);
|
|
|
|
soc_camera_limit_side(&rect.top, &rect.height,
|
|
MT9T031_ROW_SKIP, MT9T031_MIN_HEIGHT, MT9T031_MAX_HEIGHT);
|
|
|
|
return mt9t031_set_params(client, &rect, mt9t031->xskip, mt9t031->yskip);
|
|
}
|
|
|
|
static int mt9t031_get_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9t031 *mt9t031 = to_mt9t031(client);
|
|
|
|
if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
|
|
return -EINVAL;
|
|
|
|
switch (sel->target) {
|
|
case V4L2_SEL_TGT_CROP_BOUNDS:
|
|
case V4L2_SEL_TGT_CROP_DEFAULT:
|
|
sel->r.left = MT9T031_COLUMN_SKIP;
|
|
sel->r.top = MT9T031_ROW_SKIP;
|
|
sel->r.width = MT9T031_MAX_WIDTH;
|
|
sel->r.height = MT9T031_MAX_HEIGHT;
|
|
return 0;
|
|
case V4L2_SEL_TGT_CROP:
|
|
sel->r = mt9t031->rect;
|
|
return 0;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int mt9t031_get_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct v4l2_mbus_framefmt *mf = &format->format;
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9t031 *mt9t031 = to_mt9t031(client);
|
|
|
|
if (format->pad)
|
|
return -EINVAL;
|
|
|
|
mf->width = mt9t031->rect.width / mt9t031->xskip;
|
|
mf->height = mt9t031->rect.height / mt9t031->yskip;
|
|
mf->code = MEDIA_BUS_FMT_SBGGR10_1X10;
|
|
mf->colorspace = V4L2_COLORSPACE_SRGB;
|
|
mf->field = V4L2_FIELD_NONE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* If a user window larger than sensor window is requested, we'll increase the
|
|
* sensor window.
|
|
*/
|
|
static int mt9t031_set_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct v4l2_mbus_framefmt *mf = &format->format;
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9t031 *mt9t031 = to_mt9t031(client);
|
|
u16 xskip, yskip;
|
|
struct v4l2_rect rect = mt9t031->rect;
|
|
|
|
if (format->pad)
|
|
return -EINVAL;
|
|
|
|
mf->code = MEDIA_BUS_FMT_SBGGR10_1X10;
|
|
mf->colorspace = V4L2_COLORSPACE_SRGB;
|
|
v4l_bound_align_image(
|
|
&mf->width, MT9T031_MIN_WIDTH, MT9T031_MAX_WIDTH, 1,
|
|
&mf->height, MT9T031_MIN_HEIGHT, MT9T031_MAX_HEIGHT, 1, 0);
|
|
|
|
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
cfg->try_fmt = *mf;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Width and height are within limits.
|
|
* S_FMT: use binning and skipping for scaling
|
|
*/
|
|
xskip = mt9t031_skip(&rect.width, mf->width, MT9T031_MAX_WIDTH);
|
|
yskip = mt9t031_skip(&rect.height, mf->height, MT9T031_MAX_HEIGHT);
|
|
|
|
mf->code = MEDIA_BUS_FMT_SBGGR10_1X10;
|
|
mf->colorspace = V4L2_COLORSPACE_SRGB;
|
|
|
|
/* mt9t031_set_params() doesn't change width and height */
|
|
return mt9t031_set_params(client, &rect, xskip, yskip);
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static int mt9t031_g_register(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
if (reg->reg > 0xff)
|
|
return -EINVAL;
|
|
|
|
reg->size = 1;
|
|
reg->val = reg_read(client, reg->reg);
|
|
|
|
if (reg->val > 0xffff)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt9t031_s_register(struct v4l2_subdev *sd,
|
|
const struct v4l2_dbg_register *reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
if (reg->reg > 0xff)
|
|
return -EINVAL;
|
|
|
|
if (reg_write(client, reg->reg, reg->val) < 0)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int mt9t031_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct mt9t031 *mt9t031 = container_of(ctrl->handler,
|
|
struct mt9t031, hdl);
|
|
const u32 shutter_max = MT9T031_MAX_HEIGHT + MT9T031_VERTICAL_BLANK;
|
|
s32 min, max;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_EXPOSURE_AUTO:
|
|
min = mt9t031->exposure->minimum;
|
|
max = mt9t031->exposure->maximum;
|
|
mt9t031->exposure->val =
|
|
(shutter_max / 2 + (mt9t031->total_h - 1) * (max - min))
|
|
/ shutter_max + min;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mt9t031_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct mt9t031 *mt9t031 = container_of(ctrl->handler,
|
|
struct mt9t031, hdl);
|
|
struct v4l2_subdev *sd = &mt9t031->subdev;
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct v4l2_ctrl *exp = mt9t031->exposure;
|
|
int data;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_VFLIP:
|
|
if (ctrl->val)
|
|
data = reg_set(client, MT9T031_READ_MODE_2, 0x8000);
|
|
else
|
|
data = reg_clear(client, MT9T031_READ_MODE_2, 0x8000);
|
|
if (data < 0)
|
|
return -EIO;
|
|
return 0;
|
|
case V4L2_CID_HFLIP:
|
|
if (ctrl->val)
|
|
data = reg_set(client, MT9T031_READ_MODE_2, 0x4000);
|
|
else
|
|
data = reg_clear(client, MT9T031_READ_MODE_2, 0x4000);
|
|
if (data < 0)
|
|
return -EIO;
|
|
return 0;
|
|
case V4L2_CID_GAIN:
|
|
/* See Datasheet Table 7, Gain settings. */
|
|
if (ctrl->val <= ctrl->default_value) {
|
|
/* Pack it into 0..1 step 0.125, register values 0..8 */
|
|
unsigned long range = ctrl->default_value - ctrl->minimum;
|
|
data = ((ctrl->val - (s32)ctrl->minimum) * 8 + range / 2) / range;
|
|
|
|
dev_dbg(&client->dev, "Setting gain %d\n", data);
|
|
data = reg_write(client, MT9T031_GLOBAL_GAIN, data);
|
|
if (data < 0)
|
|
return -EIO;
|
|
} else {
|
|
/* Pack it into 1.125..128 variable step, register values 9..0x7860 */
|
|
/* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */
|
|
unsigned long range = ctrl->maximum - ctrl->default_value - 1;
|
|
/* calculated gain: map 65..127 to 9..1024 step 0.125 */
|
|
unsigned long gain = ((ctrl->val - (s32)ctrl->default_value - 1) *
|
|
1015 + range / 2) / range + 9;
|
|
|
|
if (gain <= 32) /* calculated gain 9..32 -> 9..32 */
|
|
data = gain;
|
|
else if (gain <= 64) /* calculated gain 33..64 -> 0x51..0x60 */
|
|
data = ((gain - 32) * 16 + 16) / 32 + 80;
|
|
else
|
|
/* calculated gain 65..1024 -> (1..120) << 8 + 0x60 */
|
|
data = (((gain - 64 + 7) * 32) & 0xff00) | 0x60;
|
|
|
|
dev_dbg(&client->dev, "Set gain from 0x%x to 0x%x\n",
|
|
reg_read(client, MT9T031_GLOBAL_GAIN), data);
|
|
data = reg_write(client, MT9T031_GLOBAL_GAIN, data);
|
|
if (data < 0)
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
|
|
case V4L2_CID_EXPOSURE_AUTO:
|
|
if (ctrl->val == V4L2_EXPOSURE_MANUAL) {
|
|
unsigned int range = exp->maximum - exp->minimum;
|
|
unsigned int shutter = ((exp->val - (s32)exp->minimum) * 1048 +
|
|
range / 2) / range + 1;
|
|
u32 old;
|
|
|
|
get_shutter(client, &old);
|
|
dev_dbg(&client->dev, "Set shutter from %u to %u\n",
|
|
old, shutter);
|
|
if (set_shutter(client, shutter) < 0)
|
|
return -EIO;
|
|
} else {
|
|
const u16 vblank = MT9T031_VERTICAL_BLANK;
|
|
mt9t031->total_h = mt9t031->rect.height +
|
|
mt9t031->y_skip_top + vblank;
|
|
|
|
if (set_shutter(client, mt9t031->total_h) < 0)
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Power Management:
|
|
* This function does nothing for now but must be present for pm to work
|
|
*/
|
|
static int mt9t031_runtime_suspend(struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Power Management:
|
|
* COLUMN_ADDRESS_MODE and ROW_ADDRESS_MODE are not rewritten if unchanged
|
|
* they are however changed at reset if the platform hook is present
|
|
* thus we rewrite them with the values stored by the driver
|
|
*/
|
|
static int mt9t031_runtime_resume(struct device *dev)
|
|
{
|
|
struct video_device *vdev = to_video_device(dev);
|
|
struct v4l2_subdev *sd = soc_camera_vdev_to_subdev(vdev);
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9t031 *mt9t031 = to_mt9t031(client);
|
|
|
|
int ret;
|
|
u16 xbin, ybin;
|
|
|
|
xbin = min(mt9t031->xskip, (u16)3);
|
|
ybin = min(mt9t031->yskip, (u16)3);
|
|
|
|
ret = reg_write(client, MT9T031_COLUMN_ADDRESS_MODE,
|
|
((xbin - 1) << 4) | (mt9t031->xskip - 1));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE,
|
|
((ybin - 1) << 4) | (mt9t031->yskip - 1));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops mt9t031_dev_pm_ops = {
|
|
.runtime_suspend = mt9t031_runtime_suspend,
|
|
.runtime_resume = mt9t031_runtime_resume,
|
|
};
|
|
|
|
static const struct device_type mt9t031_dev_type = {
|
|
.name = "MT9T031",
|
|
.pm = &mt9t031_dev_pm_ops,
|
|
};
|
|
|
|
static int mt9t031_s_power(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
|
|
struct video_device *vdev = soc_camera_i2c_to_vdev(client);
|
|
struct mt9t031 *mt9t031 = to_mt9t031(client);
|
|
int ret;
|
|
|
|
if (on) {
|
|
ret = soc_camera_power_on(&client->dev, ssdd, mt9t031->clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (vdev)
|
|
/* Not needed during probing, when vdev isn't available yet */
|
|
vdev->dev.type = &mt9t031_dev_type;
|
|
} else {
|
|
if (vdev)
|
|
vdev->dev.type = NULL;
|
|
soc_camera_power_off(&client->dev, ssdd, mt9t031->clk);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Interface active, can use i2c. If it fails, it can indeed mean, that
|
|
* this wasn't our capture interface, so, we wait for the right one
|
|
*/
|
|
static int mt9t031_video_probe(struct i2c_client *client)
|
|
{
|
|
struct mt9t031 *mt9t031 = to_mt9t031(client);
|
|
s32 data;
|
|
int ret;
|
|
|
|
ret = mt9t031_s_power(&mt9t031->subdev, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = mt9t031_idle(client);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Failed to initialise the camera\n");
|
|
goto done;
|
|
}
|
|
|
|
/* Read out the chip version register */
|
|
data = reg_read(client, MT9T031_CHIP_VERSION);
|
|
|
|
switch (data) {
|
|
case 0x1621:
|
|
break;
|
|
default:
|
|
dev_err(&client->dev,
|
|
"No MT9T031 chip detected, register read %x\n", data);
|
|
ret = -ENODEV;
|
|
goto done;
|
|
}
|
|
|
|
dev_info(&client->dev, "Detected a MT9T031 chip ID %x\n", data);
|
|
|
|
ret = v4l2_ctrl_handler_setup(&mt9t031->hdl);
|
|
|
|
done:
|
|
mt9t031_s_power(&mt9t031->subdev, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mt9t031_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9t031 *mt9t031 = to_mt9t031(client);
|
|
|
|
*lines = mt9t031->y_skip_top;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops mt9t031_ctrl_ops = {
|
|
.g_volatile_ctrl = mt9t031_g_volatile_ctrl,
|
|
.s_ctrl = mt9t031_s_ctrl,
|
|
};
|
|
|
|
static const struct v4l2_subdev_core_ops mt9t031_subdev_core_ops = {
|
|
.s_power = mt9t031_s_power,
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = mt9t031_g_register,
|
|
.s_register = mt9t031_s_register,
|
|
#endif
|
|
};
|
|
|
|
static int mt9t031_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
if (code->pad || code->index)
|
|
return -EINVAL;
|
|
|
|
code->code = MEDIA_BUS_FMT_SBGGR10_1X10;
|
|
return 0;
|
|
}
|
|
|
|
static int mt9t031_g_mbus_config(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_config *cfg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
|
|
|
|
cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
|
|
V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
|
|
V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_HIGH;
|
|
cfg->type = V4L2_MBUS_PARALLEL;
|
|
cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt9t031_s_mbus_config(struct v4l2_subdev *sd,
|
|
const struct v4l2_mbus_config *cfg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
|
|
|
|
if (soc_camera_apply_board_flags(ssdd, cfg) &
|
|
V4L2_MBUS_PCLK_SAMPLE_FALLING)
|
|
return reg_clear(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
|
|
else
|
|
return reg_set(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
|
|
}
|
|
|
|
static const struct v4l2_subdev_video_ops mt9t031_subdev_video_ops = {
|
|
.s_stream = mt9t031_s_stream,
|
|
.g_mbus_config = mt9t031_g_mbus_config,
|
|
.s_mbus_config = mt9t031_s_mbus_config,
|
|
};
|
|
|
|
static const struct v4l2_subdev_sensor_ops mt9t031_subdev_sensor_ops = {
|
|
.g_skip_top_lines = mt9t031_g_skip_top_lines,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops mt9t031_subdev_pad_ops = {
|
|
.enum_mbus_code = mt9t031_enum_mbus_code,
|
|
.get_selection = mt9t031_get_selection,
|
|
.set_selection = mt9t031_set_selection,
|
|
.get_fmt = mt9t031_get_fmt,
|
|
.set_fmt = mt9t031_set_fmt,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops mt9t031_subdev_ops = {
|
|
.core = &mt9t031_subdev_core_ops,
|
|
.video = &mt9t031_subdev_video_ops,
|
|
.sensor = &mt9t031_subdev_sensor_ops,
|
|
.pad = &mt9t031_subdev_pad_ops,
|
|
};
|
|
|
|
static int mt9t031_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *did)
|
|
{
|
|
struct mt9t031 *mt9t031;
|
|
struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
|
|
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
|
|
int ret;
|
|
|
|
if (!ssdd) {
|
|
dev_err(&client->dev, "MT9T031 driver needs platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
|
|
dev_warn(&adapter->dev,
|
|
"I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
|
|
return -EIO;
|
|
}
|
|
|
|
mt9t031 = devm_kzalloc(&client->dev, sizeof(struct mt9t031), GFP_KERNEL);
|
|
if (!mt9t031)
|
|
return -ENOMEM;
|
|
|
|
v4l2_i2c_subdev_init(&mt9t031->subdev, client, &mt9t031_subdev_ops);
|
|
v4l2_ctrl_handler_init(&mt9t031->hdl, 5);
|
|
v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
|
|
V4L2_CID_VFLIP, 0, 1, 1, 0);
|
|
v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
|
|
V4L2_CID_HFLIP, 0, 1, 1, 0);
|
|
v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
|
|
V4L2_CID_GAIN, 0, 127, 1, 64);
|
|
|
|
/*
|
|
* Simulated autoexposure. If enabled, we calculate shutter width
|
|
* ourselves in the driver based on vertical blanking and frame width
|
|
*/
|
|
mt9t031->autoexposure = v4l2_ctrl_new_std_menu(&mt9t031->hdl,
|
|
&mt9t031_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
|
|
V4L2_EXPOSURE_AUTO);
|
|
mt9t031->exposure = v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
|
|
V4L2_CID_EXPOSURE, 1, 255, 1, 255);
|
|
|
|
mt9t031->subdev.ctrl_handler = &mt9t031->hdl;
|
|
if (mt9t031->hdl.error)
|
|
return mt9t031->hdl.error;
|
|
|
|
v4l2_ctrl_auto_cluster(2, &mt9t031->autoexposure,
|
|
V4L2_EXPOSURE_MANUAL, true);
|
|
|
|
mt9t031->y_skip_top = 0;
|
|
mt9t031->rect.left = MT9T031_COLUMN_SKIP;
|
|
mt9t031->rect.top = MT9T031_ROW_SKIP;
|
|
mt9t031->rect.width = MT9T031_MAX_WIDTH;
|
|
mt9t031->rect.height = MT9T031_MAX_HEIGHT;
|
|
|
|
mt9t031->xskip = 1;
|
|
mt9t031->yskip = 1;
|
|
|
|
mt9t031->clk = v4l2_clk_get(&client->dev, "mclk");
|
|
if (IS_ERR(mt9t031->clk)) {
|
|
ret = PTR_ERR(mt9t031->clk);
|
|
goto eclkget;
|
|
}
|
|
|
|
ret = mt9t031_video_probe(client);
|
|
if (ret) {
|
|
v4l2_clk_put(mt9t031->clk);
|
|
eclkget:
|
|
v4l2_ctrl_handler_free(&mt9t031->hdl);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mt9t031_remove(struct i2c_client *client)
|
|
{
|
|
struct mt9t031 *mt9t031 = to_mt9t031(client);
|
|
|
|
v4l2_clk_put(mt9t031->clk);
|
|
v4l2_device_unregister_subdev(&mt9t031->subdev);
|
|
v4l2_ctrl_handler_free(&mt9t031->hdl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id mt9t031_id[] = {
|
|
{ "mt9t031", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mt9t031_id);
|
|
|
|
static struct i2c_driver mt9t031_i2c_driver = {
|
|
.driver = {
|
|
.name = "mt9t031",
|
|
},
|
|
.probe = mt9t031_probe,
|
|
.remove = mt9t031_remove,
|
|
.id_table = mt9t031_id,
|
|
};
|
|
|
|
module_i2c_driver(mt9t031_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Micron MT9T031 Camera driver");
|
|
MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>");
|
|
MODULE_LICENSE("GPL v2");
|