mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 11:19:37 +00:00
![Linus Torvalds](/assets/img/avatar_default.png)
Here is the big staging and iio driver update for 5.2-rc1. Lots of tiny fixes all over the staging and IIO driver trees here, along with some new IIO drivers. Also we ended up deleting two drivers, making this pull request remove a few hundred thousand lines of code, always a nice thing to see. Both of the drivers removed have been replaced with "real" drivers in their various subsystem directories, and they will be coming to you from those locations during this merge window. There are some core vt/selection changes in here, that was due to some cleanups needed for the speakup fixes. Those have all been acked by the various subsystem maintainers (i.e. me), so those are ok. We also added a few new drivers, for some odd hardware, giving new developers plenty to work on with basic coding style cleanups to come in the near future. Other than that, nothing unusual here. All of these have been in linux-next for a while with no reported issues, other than an odd gcc warning for one of the new drivers that should be fixed up soon. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHGMQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynQRACgwtlC6DFsEFwCplYxQXP5uzuIVTMAoJ61xzC0 Qim7K31f5ulaa3GJuhzo =zEY5 -----END PGP SIGNATURE----- Merge tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver updates from Greg KH: "Here is the big staging and iio driver update for 5.2-rc1. Lots of tiny fixes all over the staging and IIO driver trees here, along with some new IIO drivers. The "counter" subsystem was added in here as well, as it is needed by the IIO drivers and subsystem. Also we ended up deleting two drivers, making this pull request remove a few hundred thousand lines of code, always a nice thing to see. Both of the drivers removed have been replaced with "real" drivers in their various subsystem directories, and they will be coming to you from those locations during this merge window. There are some core vt/selection changes in here, that was due to some cleanups needed for the speakup fixes. Those have all been acked by the various subsystem maintainers (i.e. me), so those are ok. We also added a few new drivers, for some odd hardware, giving new developers plenty to work on with basic coding style cleanups to come in the near future. Other than that, nothing unusual here. All of these have been in linux-next for a while with no reported issues, other than an odd gcc warning for one of the new drivers that should be fixed up soon" [ I fixed up the warning myself - Linus ] * tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (663 commits) staging: kpc2000: kpc_spi: Fix build error for {read,write}q Staging: rtl8192e: Remove extra space before break statement Staging: rtl8192u: ieee80211: Fix if-else indentation warning Staging: rtl8192u: ieee80211: Fix indentation errors by removing extra spaces staging: most: cdev: fix chrdev_region leak in mod_exit staging: wlan-ng: Fix improper SPDX comment style staging: rtl8192u: ieee80211: Resolve ERROR reported by checkpatch staging: vc04_services: bcm2835-camera: Compress two lines into one line staging: rtl8723bs: core: Use !x in place of NULL comparison. staging: rtl8723bs: core: Prefer using the BIT Macro. staging: fieldbus: anybus-s: fix wait_for_completion_timeout return handling staging: kpc2000: fix up build problems with readq() staging: rtlwifi: move remaining phydm .h files staging: rtlwifi: strip down phydm .h files staging: rtlwifi: delete the staging driver staging: fieldbus: anybus-s: rename bus id field to avoid confusion staging: fieldbus: anybus-s: keep device bus id in bus endianness Staging: sm750fb: Change *array into *const array staging: rtl8192u: ieee80211: Fix spelling mistake staging: rtl8192u: ieee80211: Replace bit shifting with BIT macro ...
416 lines
9.4 KiB
C
416 lines
9.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// spi-mt7621.c -- MediaTek MT7621 SPI controller driver
|
|
//
|
|
// Copyright (C) 2011 Sergiy <piratfm@gmail.com>
|
|
// Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
|
|
// Copyright (C) 2014-2015 Felix Fietkau <nbd@nbd.name>
|
|
//
|
|
// Some parts are based on spi-orion.c:
|
|
// Author: Shadi Ammouri <shadi@marvell.com>
|
|
// Copyright (C) 2007-2008 Marvell Ltd.
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#define DRIVER_NAME "spi-mt7621"
|
|
|
|
/* in usec */
|
|
#define RALINK_SPI_WAIT_MAX_LOOP 2000
|
|
|
|
/* SPISTAT register bit field */
|
|
#define SPISTAT_BUSY BIT(0)
|
|
|
|
#define MT7621_SPI_TRANS 0x00
|
|
#define SPITRANS_BUSY BIT(16)
|
|
|
|
#define MT7621_SPI_OPCODE 0x04
|
|
#define MT7621_SPI_DATA0 0x08
|
|
#define MT7621_SPI_DATA4 0x18
|
|
#define SPI_CTL_TX_RX_CNT_MASK 0xff
|
|
#define SPI_CTL_START BIT(8)
|
|
|
|
#define MT7621_SPI_MASTER 0x28
|
|
#define MASTER_MORE_BUFMODE BIT(2)
|
|
#define MASTER_FULL_DUPLEX BIT(10)
|
|
#define MASTER_RS_CLK_SEL GENMASK(27, 16)
|
|
#define MASTER_RS_CLK_SEL_SHIFT 16
|
|
#define MASTER_RS_SLAVE_SEL GENMASK(31, 29)
|
|
|
|
#define MT7621_SPI_MOREBUF 0x2c
|
|
#define MT7621_SPI_POLAR 0x38
|
|
#define MT7621_SPI_SPACE 0x3c
|
|
|
|
#define MT7621_CPHA BIT(5)
|
|
#define MT7621_CPOL BIT(4)
|
|
#define MT7621_LSB_FIRST BIT(3)
|
|
|
|
struct mt7621_spi {
|
|
struct spi_controller *master;
|
|
void __iomem *base;
|
|
unsigned int sys_freq;
|
|
unsigned int speed;
|
|
struct clk *clk;
|
|
int pending_write;
|
|
};
|
|
|
|
static inline struct mt7621_spi *spidev_to_mt7621_spi(struct spi_device *spi)
|
|
{
|
|
return spi_controller_get_devdata(spi->master);
|
|
}
|
|
|
|
static inline u32 mt7621_spi_read(struct mt7621_spi *rs, u32 reg)
|
|
{
|
|
return ioread32(rs->base + reg);
|
|
}
|
|
|
|
static inline void mt7621_spi_write(struct mt7621_spi *rs, u32 reg, u32 val)
|
|
{
|
|
iowrite32(val, rs->base + reg);
|
|
}
|
|
|
|
static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
|
|
{
|
|
struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
|
|
int cs = spi->chip_select;
|
|
u32 polar = 0;
|
|
u32 master;
|
|
|
|
/*
|
|
* Select SPI device 7, enable "more buffer mode" and disable
|
|
* full-duplex (only half-duplex really works on this chip
|
|
* reliably)
|
|
*/
|
|
master = mt7621_spi_read(rs, MT7621_SPI_MASTER);
|
|
master |= MASTER_RS_SLAVE_SEL | MASTER_MORE_BUFMODE;
|
|
master &= ~MASTER_FULL_DUPLEX;
|
|
mt7621_spi_write(rs, MT7621_SPI_MASTER, master);
|
|
|
|
rs->pending_write = 0;
|
|
|
|
if (enable)
|
|
polar = BIT(cs);
|
|
mt7621_spi_write(rs, MT7621_SPI_POLAR, polar);
|
|
}
|
|
|
|
static int mt7621_spi_prepare(struct spi_device *spi, unsigned int speed)
|
|
{
|
|
struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
|
|
u32 rate;
|
|
u32 reg;
|
|
|
|
dev_dbg(&spi->dev, "speed:%u\n", speed);
|
|
|
|
rate = DIV_ROUND_UP(rs->sys_freq, speed);
|
|
dev_dbg(&spi->dev, "rate-1:%u\n", rate);
|
|
|
|
if (rate > 4097)
|
|
return -EINVAL;
|
|
|
|
if (rate < 2)
|
|
rate = 2;
|
|
|
|
reg = mt7621_spi_read(rs, MT7621_SPI_MASTER);
|
|
reg &= ~MASTER_RS_CLK_SEL;
|
|
reg |= (rate - 2) << MASTER_RS_CLK_SEL_SHIFT;
|
|
rs->speed = speed;
|
|
|
|
reg &= ~MT7621_LSB_FIRST;
|
|
if (spi->mode & SPI_LSB_FIRST)
|
|
reg |= MT7621_LSB_FIRST;
|
|
|
|
/*
|
|
* This SPI controller seems to be tested on SPI flash only and some
|
|
* bits are swizzled under other SPI modes probably due to incorrect
|
|
* wiring inside the silicon. Only mode 0 works correctly.
|
|
*/
|
|
reg &= ~(MT7621_CPHA | MT7621_CPOL);
|
|
|
|
mt7621_spi_write(rs, MT7621_SPI_MASTER, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int mt7621_spi_wait_till_ready(struct mt7621_spi *rs)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
|
|
u32 status;
|
|
|
|
status = mt7621_spi_read(rs, MT7621_SPI_TRANS);
|
|
if ((status & SPITRANS_BUSY) == 0)
|
|
return 0;
|
|
cpu_relax();
|
|
udelay(1);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void mt7621_spi_read_half_duplex(struct mt7621_spi *rs,
|
|
int rx_len, u8 *buf)
|
|
{
|
|
int tx_len;
|
|
|
|
/*
|
|
* Combine with any pending write, and perform one or more half-duplex
|
|
* transactions reading 'len' bytes. Data to be written is already in
|
|
* MT7621_SPI_DATA.
|
|
*/
|
|
tx_len = rs->pending_write;
|
|
rs->pending_write = 0;
|
|
|
|
while (rx_len || tx_len) {
|
|
int i;
|
|
u32 val = (min(tx_len, 4) * 8) << 24;
|
|
int rx = min(rx_len, 32);
|
|
|
|
if (tx_len > 4)
|
|
val |= (tx_len - 4) * 8;
|
|
val |= (rx * 8) << 12;
|
|
mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val);
|
|
|
|
tx_len = 0;
|
|
|
|
val = mt7621_spi_read(rs, MT7621_SPI_TRANS);
|
|
val |= SPI_CTL_START;
|
|
mt7621_spi_write(rs, MT7621_SPI_TRANS, val);
|
|
|
|
mt7621_spi_wait_till_ready(rs);
|
|
|
|
for (i = 0; i < rx; i++) {
|
|
if ((i % 4) == 0)
|
|
val = mt7621_spi_read(rs, MT7621_SPI_DATA0 + i);
|
|
*buf++ = val & 0xff;
|
|
val >>= 8;
|
|
}
|
|
|
|
rx_len -= i;
|
|
}
|
|
}
|
|
|
|
static inline void mt7621_spi_flush(struct mt7621_spi *rs)
|
|
{
|
|
mt7621_spi_read_half_duplex(rs, 0, NULL);
|
|
}
|
|
|
|
static void mt7621_spi_write_half_duplex(struct mt7621_spi *rs,
|
|
int tx_len, const u8 *buf)
|
|
{
|
|
int len = rs->pending_write;
|
|
int val = 0;
|
|
|
|
if (len & 3) {
|
|
val = mt7621_spi_read(rs, MT7621_SPI_OPCODE + (len & ~3));
|
|
if (len < 4) {
|
|
val <<= (4 - len) * 8;
|
|
val = swab32(val);
|
|
}
|
|
}
|
|
|
|
while (tx_len > 0) {
|
|
if (len >= 36) {
|
|
rs->pending_write = len;
|
|
mt7621_spi_flush(rs);
|
|
len = 0;
|
|
}
|
|
|
|
val |= *buf++ << (8 * (len & 3));
|
|
len++;
|
|
if ((len & 3) == 0) {
|
|
if (len == 4)
|
|
/* The byte-order of the opcode is weird! */
|
|
val = swab32(val);
|
|
mt7621_spi_write(rs, MT7621_SPI_OPCODE + len - 4, val);
|
|
val = 0;
|
|
}
|
|
tx_len -= 1;
|
|
}
|
|
|
|
if (len & 3) {
|
|
if (len < 4) {
|
|
val = swab32(val);
|
|
val >>= (4 - len) * 8;
|
|
}
|
|
mt7621_spi_write(rs, MT7621_SPI_OPCODE + (len & ~3), val);
|
|
}
|
|
|
|
rs->pending_write = len;
|
|
}
|
|
|
|
static int mt7621_spi_transfer_one_message(struct spi_controller *master,
|
|
struct spi_message *m)
|
|
{
|
|
struct mt7621_spi *rs = spi_controller_get_devdata(master);
|
|
struct spi_device *spi = m->spi;
|
|
unsigned int speed = spi->max_speed_hz;
|
|
struct spi_transfer *t = NULL;
|
|
int status = 0;
|
|
|
|
mt7621_spi_wait_till_ready(rs);
|
|
|
|
list_for_each_entry(t, &m->transfers, transfer_list)
|
|
if (t->speed_hz < speed)
|
|
speed = t->speed_hz;
|
|
|
|
if (mt7621_spi_prepare(spi, speed)) {
|
|
status = -EIO;
|
|
goto msg_done;
|
|
}
|
|
|
|
/* Assert CS */
|
|
mt7621_spi_set_cs(spi, 1);
|
|
|
|
m->actual_length = 0;
|
|
list_for_each_entry(t, &m->transfers, transfer_list) {
|
|
if ((t->rx_buf) && (t->tx_buf)) {
|
|
/*
|
|
* This controller will shift some extra data out
|
|
* of spi_opcode if (mosi_bit_cnt > 0) &&
|
|
* (cmd_bit_cnt == 0). So the claimed full-duplex
|
|
* support is broken since we have no way to read
|
|
* the MISO value during that bit.
|
|
*/
|
|
status = -EIO;
|
|
goto msg_done;
|
|
} else if (t->rx_buf) {
|
|
mt7621_spi_read_half_duplex(rs, t->len, t->rx_buf);
|
|
} else if (t->tx_buf) {
|
|
mt7621_spi_write_half_duplex(rs, t->len, t->tx_buf);
|
|
}
|
|
m->actual_length += t->len;
|
|
}
|
|
|
|
/* Flush data and deassert CS */
|
|
mt7621_spi_flush(rs);
|
|
mt7621_spi_set_cs(spi, 0);
|
|
|
|
msg_done:
|
|
m->status = status;
|
|
spi_finalize_current_message(master);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt7621_spi_setup(struct spi_device *spi)
|
|
{
|
|
struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
|
|
|
|
if ((spi->max_speed_hz == 0) ||
|
|
(spi->max_speed_hz > (rs->sys_freq / 2)))
|
|
spi->max_speed_hz = rs->sys_freq / 2;
|
|
|
|
if (spi->max_speed_hz < (rs->sys_freq / 4097)) {
|
|
dev_err(&spi->dev, "setup: requested speed is too low %d Hz\n",
|
|
spi->max_speed_hz);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mt7621_spi_match[] = {
|
|
{ .compatible = "ralink,mt7621-spi" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mt7621_spi_match);
|
|
|
|
static int mt7621_spi_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *match;
|
|
struct spi_controller *master;
|
|
struct mt7621_spi *rs;
|
|
void __iomem *base;
|
|
struct resource *r;
|
|
int status = 0;
|
|
struct clk *clk;
|
|
int ret;
|
|
|
|
match = of_match_device(mt7621_spi_match, &pdev->dev);
|
|
if (!match)
|
|
return -EINVAL;
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
base = devm_ioremap_resource(&pdev->dev, r);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(clk)) {
|
|
dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n",
|
|
status);
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
status = clk_prepare_enable(clk);
|
|
if (status)
|
|
return status;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(*rs));
|
|
if (!master) {
|
|
dev_info(&pdev->dev, "master allocation failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
master->mode_bits = SPI_LSB_FIRST;
|
|
master->flags = SPI_CONTROLLER_HALF_DUPLEX;
|
|
master->setup = mt7621_spi_setup;
|
|
master->transfer_one_message = mt7621_spi_transfer_one_message;
|
|
master->bits_per_word_mask = SPI_BPW_MASK(8);
|
|
master->dev.of_node = pdev->dev.of_node;
|
|
master->num_chipselect = 2;
|
|
|
|
dev_set_drvdata(&pdev->dev, master);
|
|
|
|
rs = spi_controller_get_devdata(master);
|
|
rs->base = base;
|
|
rs->clk = clk;
|
|
rs->master = master;
|
|
rs->sys_freq = clk_get_rate(rs->clk);
|
|
rs->pending_write = 0;
|
|
dev_info(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
|
|
|
|
ret = device_reset(&pdev->dev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "SPI reset failed!\n");
|
|
return ret;
|
|
}
|
|
|
|
return devm_spi_register_controller(&pdev->dev, master);
|
|
}
|
|
|
|
static int mt7621_spi_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_controller *master;
|
|
struct mt7621_spi *rs;
|
|
|
|
master = dev_get_drvdata(&pdev->dev);
|
|
rs = spi_controller_get_devdata(master);
|
|
|
|
clk_disable_unprepare(rs->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|
|
|
|
static struct platform_driver mt7621_spi_driver = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = mt7621_spi_match,
|
|
},
|
|
.probe = mt7621_spi_probe,
|
|
.remove = mt7621_spi_remove,
|
|
};
|
|
|
|
module_platform_driver(mt7621_spi_driver);
|
|
|
|
MODULE_DESCRIPTION("MT7621 SPI driver");
|
|
MODULE_AUTHOR("Felix Fietkau <nbd@nbd.name>");
|
|
MODULE_LICENSE("GPL");
|