linux-stable/arch/arm/mach-omap2/pm33xx-core.c
Tony Lindgren 093a474ce1 ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured
If the PM related modules are not loaded and PM firmware not configured,
the system suspend fails to resume. Let's fix this by adding initial
platform_suspend_ops to block suspend and warn about missing modules.

When pm33xx and wkup_m3_ipc have been loaded and m3 coprocessor booted
with it's firmware, pm33xx sets up working platform_suspend_ops. Note
that we need to configure at least PM_SUSPEND_STANDBY to have
suspend_set_ops().

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11 10:43:08 +03:00

443 lines
9.6 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* AM33XX Arch Power Management Routines
*
* Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
* Dave Gerlach
*/
#include <linux/cpuidle.h>
#include <linux/platform_data/pm33xx.h>
#include <linux/suspend.h>
#include <asm/cpuidle.h>
#include <asm/smp_scu.h>
#include <asm/suspend.h>
#include <linux/errno.h>
#include <linux/clk.h>
#include <linux/cpu.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/wkup_m3_ipc.h>
#include <linux/of.h>
#include <linux/rtc.h>
#include "cm33xx.h"
#include "common.h"
#include "control.h"
#include "clockdomain.h"
#include "iomap.h"
#include "pm.h"
#include "powerdomain.h"
#include "prm33xx.h"
#include "soc.h"
#include "sram.h"
#include "omap-secure.h"
static struct powerdomain *cefuse_pwrdm, *gfx_pwrdm, *per_pwrdm, *mpu_pwrdm;
static struct clockdomain *gfx_l4ls_clkdm;
static void __iomem *scu_base;
static int (*idle_fn)(u32 wfi_flags);
struct amx3_idle_state {
int wfi_flags;
};
static struct amx3_idle_state *idle_states;
static int am43xx_map_scu(void)
{
scu_base = ioremap(scu_a9_get_base(), SZ_256);
if (!scu_base)
return -ENOMEM;
return 0;
}
static int am33xx_check_off_mode_enable(void)
{
if (enable_off_mode)
pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n");
/* off mode not supported on am335x so return 0 always */
return 0;
}
static int am43xx_check_off_mode_enable(void)
{
/*
* Check for am437x-gp-evm which has the right Hardware design to
* support this mode reliably.
*/
if (of_machine_is_compatible("ti,am437x-gp-evm") && enable_off_mode)
return enable_off_mode;
else if (enable_off_mode)
pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n");
return 0;
}
static int amx3_common_init(int (*idle)(u32 wfi_flags))
{
gfx_pwrdm = pwrdm_lookup("gfx_pwrdm");
per_pwrdm = pwrdm_lookup("per_pwrdm");
mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
if ((!gfx_pwrdm) || (!per_pwrdm) || (!mpu_pwrdm))
return -ENODEV;
(void)clkdm_for_each(omap_pm_clkdms_setup, NULL);
/* CEFUSE domain can be turned off post bootup */
cefuse_pwrdm = pwrdm_lookup("cefuse_pwrdm");
if (!cefuse_pwrdm)
pr_err("PM: Failed to get cefuse_pwrdm\n");
else if (omap_type() != OMAP2_DEVICE_TYPE_GP)
pr_info("PM: Leaving EFUSE power domain active\n");
else
omap_set_pwrdm_state(cefuse_pwrdm, PWRDM_POWER_OFF);
idle_fn = idle;
return 0;
}
static int am33xx_suspend_init(int (*idle)(u32 wfi_flags))
{
int ret;
gfx_l4ls_clkdm = clkdm_lookup("gfx_l4ls_gfx_clkdm");
if (!gfx_l4ls_clkdm) {
pr_err("PM: Cannot lookup gfx_l4ls_clkdm clockdomains\n");
return -ENODEV;
}
ret = amx3_common_init(idle);
return ret;
}
static int am43xx_suspend_init(int (*idle)(u32 wfi_flags))
{
int ret = 0;
ret = am43xx_map_scu();
if (ret) {
pr_err("PM: Could not ioremap SCU\n");
return ret;
}
ret = amx3_common_init(idle);
return ret;
}
static int amx3_suspend_deinit(void)
{
idle_fn = NULL;
return 0;
}
static void amx3_pre_suspend_common(void)
{
omap_set_pwrdm_state(gfx_pwrdm, PWRDM_POWER_OFF);
}
static void amx3_post_suspend_common(void)
{
int status;
/*
* Because gfx_pwrdm is the only one under MPU control,
* comment on transition status
*/
status = pwrdm_read_pwrst(gfx_pwrdm);
if (status != PWRDM_POWER_OFF)
pr_err("PM: GFX domain did not transition: %x\n", status);
}
static int am33xx_suspend(unsigned int state, int (*fn)(unsigned long),
unsigned long args)
{
int ret = 0;
amx3_pre_suspend_common();
ret = cpu_suspend(args, fn);
amx3_post_suspend_common();
/*
* BUG: GFX_L4LS clock domain needs to be woken up to
* ensure thet L4LS clock domain does not get stuck in
* transition. If that happens L3 module does not get
* disabled, thereby leading to PER power domain
* transition failing
*/
clkdm_wakeup(gfx_l4ls_clkdm);
clkdm_sleep(gfx_l4ls_clkdm);
return ret;
}
static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long),
unsigned long args)
{
int ret = 0;
/* Suspend secure side on HS devices */
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
if (optee_available)
omap_smccc_smc(AM43xx_PPA_SVC_PM_SUSPEND, 0);
else
omap_secure_dispatcher(AM43xx_PPA_SVC_PM_SUSPEND,
FLAG_START_CRITICAL,
0, 0, 0, 0, 0);
}
amx3_pre_suspend_common();
scu_power_mode(scu_base, SCU_PM_POWEROFF);
ret = cpu_suspend(args, fn);
scu_power_mode(scu_base, SCU_PM_NORMAL);
if (!am43xx_check_off_mode_enable())
amx3_post_suspend_common();
/*
* Resume secure side on HS devices.
*
* Note that even on systems with OP-TEE available this resume call is
* issued to the ROM. This is because upon waking from suspend the ROM
* is restored as the secure monitor. On systems with OP-TEE ROM will
* restore OP-TEE during this call.
*/
if (omap_type() != OMAP2_DEVICE_TYPE_GP)
omap_secure_dispatcher(AM43xx_PPA_SVC_PM_RESUME,
FLAG_START_CRITICAL,
0, 0, 0, 0, 0);
return ret;
}
static int am33xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args)
{
int ret = 0;
if (omap_irq_pending() || need_resched())
return ret;
ret = cpu_suspend(args, fn);
return ret;
}
static int am43xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args)
{
int ret = 0;
if (!scu_base)
return 0;
scu_power_mode(scu_base, SCU_PM_DORMANT);
ret = cpu_suspend(args, fn);
scu_power_mode(scu_base, SCU_PM_NORMAL);
return ret;
}
static void amx3_begin_suspend(void)
{
cpu_idle_poll_ctrl(true);
}
static void amx3_finish_suspend(void)
{
cpu_idle_poll_ctrl(false);
}
static struct am33xx_pm_sram_addr *amx3_get_sram_addrs(void)
{
if (soc_is_am33xx())
return &am33xx_pm_sram;
else if (soc_is_am437x())
return &am43xx_pm_sram;
else
return NULL;
}
static void am43xx_save_context(void)
{
}
static void am33xx_save_context(void)
{
omap_intc_save_context();
}
static void am33xx_restore_context(void)
{
omap_intc_restore_context();
}
static void am43xx_restore_context(void)
{
/*
* HACK: restore dpll_per_clkdcoldo register contents, to avoid
* breaking suspend-resume
*/
writel_relaxed(0x0, AM33XX_L4_WK_IO_ADDRESS(0x44df2e14));
}
static struct am33xx_pm_platform_data am33xx_ops = {
.init = am33xx_suspend_init,
.deinit = amx3_suspend_deinit,
.soc_suspend = am33xx_suspend,
.cpu_suspend = am33xx_cpu_suspend,
.begin_suspend = amx3_begin_suspend,
.finish_suspend = amx3_finish_suspend,
.get_sram_addrs = amx3_get_sram_addrs,
.save_context = am33xx_save_context,
.restore_context = am33xx_restore_context,
.check_off_mode_enable = am33xx_check_off_mode_enable,
};
static struct am33xx_pm_platform_data am43xx_ops = {
.init = am43xx_suspend_init,
.deinit = amx3_suspend_deinit,
.soc_suspend = am43xx_suspend,
.cpu_suspend = am43xx_cpu_suspend,
.begin_suspend = amx3_begin_suspend,
.finish_suspend = amx3_finish_suspend,
.get_sram_addrs = amx3_get_sram_addrs,
.save_context = am43xx_save_context,
.restore_context = am43xx_restore_context,
.check_off_mode_enable = am43xx_check_off_mode_enable,
};
static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void)
{
if (soc_is_am33xx())
return &am33xx_ops;
else if (soc_is_am437x())
return &am43xx_ops;
else
return NULL;
}
#ifdef CONFIG_SUSPEND
/*
* Block system suspend initially. Later on pm33xx sets up it's own
* platform_suspend_ops after probe. That depends also on loaded
* wkup_m3_ipc and booted am335x-pm-firmware.elf.
*/
static int amx3_suspend_block(suspend_state_t state)
{
pr_warn("PM not initialized for pm33xx, wkup_m3_ipc, or am335x-pm-firmware.elf\n");
return -EINVAL;
}
static int amx3_pm_valid(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_STANDBY:
return 1;
default:
return 0;
}
}
static const struct platform_suspend_ops amx3_blocked_pm_ops = {
.begin = amx3_suspend_block,
.valid = amx3_pm_valid,
};
static void __init amx3_block_suspend(void)
{
suspend_set_ops(&amx3_blocked_pm_ops);
}
#else
static inline void amx3_block_suspend(void)
{
}
#endif /* CONFIG_SUSPEND */
int __init amx3_common_pm_init(void)
{
struct am33xx_pm_platform_data *pdata;
struct platform_device_info devinfo;
pdata = am33xx_pm_get_pdata();
memset(&devinfo, 0, sizeof(devinfo));
devinfo.name = "pm33xx";
devinfo.data = pdata;
devinfo.size_data = sizeof(*pdata);
devinfo.id = -1;
platform_device_register_full(&devinfo);
amx3_block_suspend();
return 0;
}
static int __init amx3_idle_init(struct device_node *cpu_node, int cpu)
{
struct device_node *state_node;
struct amx3_idle_state states[CPUIDLE_STATE_MAX];
int i;
int state_count = 1;
for (i = 0; ; i++) {
state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
if (!state_node)
break;
if (!of_device_is_available(state_node))
continue;
if (i == CPUIDLE_STATE_MAX) {
pr_warn("%s: cpuidle states reached max possible\n",
__func__);
break;
}
states[state_count].wfi_flags = 0;
if (of_property_read_bool(state_node, "ti,idle-wkup-m3"))
states[state_count].wfi_flags |= WFI_FLAG_WAKE_M3 |
WFI_FLAG_FLUSH_CACHE;
state_count++;
}
idle_states = kcalloc(state_count, sizeof(*idle_states), GFP_KERNEL);
if (!idle_states)
return -ENOMEM;
for (i = 1; i < state_count; i++)
idle_states[i].wfi_flags = states[i].wfi_flags;
return 0;
}
static int amx3_idle_enter(unsigned long index)
{
struct amx3_idle_state *idle_state = &idle_states[index];
if (!idle_state)
return -EINVAL;
if (idle_fn)
idle_fn(idle_state->wfi_flags);
return 0;
}
static struct cpuidle_ops amx3_cpuidle_ops __initdata = {
.init = amx3_idle_init,
.suspend = amx3_idle_enter,
};
CPUIDLE_METHOD_OF_DECLARE(pm33xx_idle, "ti,am3352", &amx3_cpuidle_ops);
CPUIDLE_METHOD_OF_DECLARE(pm43xx_idle, "ti,am4372", &amx3_cpuidle_ops);