linux-stable/arch/powerpc/kernel/pci-common.c
Oliver O'Halloran 2d0953f7d5 powerpc/eeh: Remove eeh_add_device_tree_late()
On pseries and PowerNV pcibios_bus_add_device() calls eeh_add_device_late()
so there's no need to do a separate tree traversal to bind the eeh_dev and
pci_dev together setting up the PHB at boot. As a result we can remove
eeh_add_device_tree_late().

Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306073904.4737-2-oohall@gmail.com
2020-03-25 12:09:38 +11:00

1627 lines
44 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Contains common pci routines for ALL ppc platform
* (based on pci_32.c and pci_64.c)
*
* Port for PPC64 David Engebretsen, IBM Corp.
* Contains common pci routines for ppc64 platform, pSeries and iSeries brands.
*
* Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
* Rework, based on alpha PCI code.
*
* Common pmac/prep/chrp pci routines. -- Cort
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/mm.h>
#include <linux/shmem_fs.h>
#include <linux/list.h>
#include <linux/syscalls.h>
#include <linux/irq.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/vgaarb.h>
#include <linux/numa.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/byteorder.h>
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
#include <asm/eeh.h>
#include "../../../drivers/pci/pci.h"
/* hose_spinlock protects accesses to the the phb_bitmap. */
static DEFINE_SPINLOCK(hose_spinlock);
LIST_HEAD(hose_list);
/* For dynamic PHB numbering on get_phb_number(): max number of PHBs. */
#define MAX_PHBS 0x10000
/*
* For dynamic PHB numbering: used/free PHBs tracking bitmap.
* Accesses to this bitmap should be protected by hose_spinlock.
*/
static DECLARE_BITMAP(phb_bitmap, MAX_PHBS);
/* ISA Memory physical address */
resource_size_t isa_mem_base;
EXPORT_SYMBOL(isa_mem_base);
static const struct dma_map_ops *pci_dma_ops;
void set_pci_dma_ops(const struct dma_map_ops *dma_ops)
{
pci_dma_ops = dma_ops;
}
/*
* This function should run under locking protection, specifically
* hose_spinlock.
*/
static int get_phb_number(struct device_node *dn)
{
int ret, phb_id = -1;
u32 prop_32;
u64 prop;
/*
* Try fixed PHB numbering first, by checking archs and reading
* the respective device-tree properties. Firstly, try powernv by
* reading "ibm,opal-phbid", only present in OPAL environment.
*/
ret = of_property_read_u64(dn, "ibm,opal-phbid", &prop);
if (ret) {
ret = of_property_read_u32_index(dn, "reg", 1, &prop_32);
prop = prop_32;
}
if (!ret)
phb_id = (int)(prop & (MAX_PHBS - 1));
/* We need to be sure to not use the same PHB number twice. */
if ((phb_id >= 0) && !test_and_set_bit(phb_id, phb_bitmap))
return phb_id;
/*
* If not pseries nor powernv, or if fixed PHB numbering tried to add
* the same PHB number twice, then fallback to dynamic PHB numbering.
*/
phb_id = find_first_zero_bit(phb_bitmap, MAX_PHBS);
BUG_ON(phb_id >= MAX_PHBS);
set_bit(phb_id, phb_bitmap);
return phb_id;
}
struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
{
struct pci_controller *phb;
phb = zalloc_maybe_bootmem(sizeof(struct pci_controller), GFP_KERNEL);
if (phb == NULL)
return NULL;
spin_lock(&hose_spinlock);
phb->global_number = get_phb_number(dev);
list_add_tail(&phb->list_node, &hose_list);
spin_unlock(&hose_spinlock);
phb->dn = dev;
phb->is_dynamic = slab_is_available();
#ifdef CONFIG_PPC64
if (dev) {
int nid = of_node_to_nid(dev);
if (nid < 0 || !node_online(nid))
nid = NUMA_NO_NODE;
PHB_SET_NODE(phb, nid);
}
#endif
return phb;
}
EXPORT_SYMBOL_GPL(pcibios_alloc_controller);
void pcibios_free_controller(struct pci_controller *phb)
{
spin_lock(&hose_spinlock);
/* Clear bit of phb_bitmap to allow reuse of this PHB number. */
if (phb->global_number < MAX_PHBS)
clear_bit(phb->global_number, phb_bitmap);
list_del(&phb->list_node);
spin_unlock(&hose_spinlock);
if (phb->is_dynamic)
kfree(phb);
}
EXPORT_SYMBOL_GPL(pcibios_free_controller);
/*
* This function is used to call pcibios_free_controller()
* in a deferred manner: a callback from the PCI subsystem.
*
* _*DO NOT*_ call pcibios_free_controller() explicitly if
* this is used (or it may access an invalid *phb pointer).
*
* The callback occurs when all references to the root bus
* are dropped (e.g., child buses/devices and their users).
*
* It's called as .release_fn() of 'struct pci_host_bridge'
* which is associated with the 'struct pci_controller.bus'
* (root bus) - it expects .release_data to hold a pointer
* to 'struct pci_controller'.
*
* In order to use it, register .release_fn()/release_data
* like this:
*
* pci_set_host_bridge_release(bridge,
* pcibios_free_controller_deferred
* (void *) phb);
*
* e.g. in the pcibios_root_bridge_prepare() callback from
* pci_create_root_bus().
*/
void pcibios_free_controller_deferred(struct pci_host_bridge *bridge)
{
struct pci_controller *phb = (struct pci_controller *)
bridge->release_data;
pr_debug("domain %d, dynamic %d\n", phb->global_number, phb->is_dynamic);
pcibios_free_controller(phb);
}
EXPORT_SYMBOL_GPL(pcibios_free_controller_deferred);
/*
* The function is used to return the minimal alignment
* for memory or I/O windows of the associated P2P bridge.
* By default, 4KiB alignment for I/O windows and 1MiB for
* memory windows.
*/
resource_size_t pcibios_window_alignment(struct pci_bus *bus,
unsigned long type)
{
struct pci_controller *phb = pci_bus_to_host(bus);
if (phb->controller_ops.window_alignment)
return phb->controller_ops.window_alignment(bus, type);
/*
* PCI core will figure out the default
* alignment: 4KiB for I/O and 1MiB for
* memory window.
*/
return 1;
}
void pcibios_setup_bridge(struct pci_bus *bus, unsigned long type)
{
struct pci_controller *hose = pci_bus_to_host(bus);
if (hose->controller_ops.setup_bridge)
hose->controller_ops.setup_bridge(bus, type);
}
void pcibios_reset_secondary_bus(struct pci_dev *dev)
{
struct pci_controller *phb = pci_bus_to_host(dev->bus);
if (phb->controller_ops.reset_secondary_bus) {
phb->controller_ops.reset_secondary_bus(dev);
return;
}
pci_reset_secondary_bus(dev);
}
resource_size_t pcibios_default_alignment(void)
{
if (ppc_md.pcibios_default_alignment)
return ppc_md.pcibios_default_alignment();
return 0;
}
#ifdef CONFIG_PCI_IOV
resource_size_t pcibios_iov_resource_alignment(struct pci_dev *pdev, int resno)
{
if (ppc_md.pcibios_iov_resource_alignment)
return ppc_md.pcibios_iov_resource_alignment(pdev, resno);
return pci_iov_resource_size(pdev, resno);
}
int pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
{
if (ppc_md.pcibios_sriov_enable)
return ppc_md.pcibios_sriov_enable(pdev, num_vfs);
return 0;
}
int pcibios_sriov_disable(struct pci_dev *pdev)
{
if (ppc_md.pcibios_sriov_disable)
return ppc_md.pcibios_sriov_disable(pdev);
return 0;
}
#endif /* CONFIG_PCI_IOV */
static resource_size_t pcibios_io_size(const struct pci_controller *hose)
{
#ifdef CONFIG_PPC64
return hose->pci_io_size;
#else
return resource_size(&hose->io_resource);
#endif
}
int pcibios_vaddr_is_ioport(void __iomem *address)
{
int ret = 0;
struct pci_controller *hose;
resource_size_t size;
spin_lock(&hose_spinlock);
list_for_each_entry(hose, &hose_list, list_node) {
size = pcibios_io_size(hose);
if (address >= hose->io_base_virt &&
address < (hose->io_base_virt + size)) {
ret = 1;
break;
}
}
spin_unlock(&hose_spinlock);
return ret;
}
unsigned long pci_address_to_pio(phys_addr_t address)
{
struct pci_controller *hose;
resource_size_t size;
unsigned long ret = ~0;
spin_lock(&hose_spinlock);
list_for_each_entry(hose, &hose_list, list_node) {
size = pcibios_io_size(hose);
if (address >= hose->io_base_phys &&
address < (hose->io_base_phys + size)) {
unsigned long base =
(unsigned long)hose->io_base_virt - _IO_BASE;
ret = base + (address - hose->io_base_phys);
break;
}
}
spin_unlock(&hose_spinlock);
return ret;
}
EXPORT_SYMBOL_GPL(pci_address_to_pio);
/*
* Return the domain number for this bus.
*/
int pci_domain_nr(struct pci_bus *bus)
{
struct pci_controller *hose = pci_bus_to_host(bus);
return hose->global_number;
}
EXPORT_SYMBOL(pci_domain_nr);
/* This routine is meant to be used early during boot, when the
* PCI bus numbers have not yet been assigned, and you need to
* issue PCI config cycles to an OF device.
* It could also be used to "fix" RTAS config cycles if you want
* to set pci_assign_all_buses to 1 and still use RTAS for PCI
* config cycles.
*/
struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
{
while(node) {
struct pci_controller *hose, *tmp;
list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
if (hose->dn == node)
return hose;
node = node->parent;
}
return NULL;
}
struct pci_controller *pci_find_controller_for_domain(int domain_nr)
{
struct pci_controller *hose;
list_for_each_entry(hose, &hose_list, list_node)
if (hose->global_number == domain_nr)
return hose;
return NULL;
}
/*
* Reads the interrupt pin to determine if interrupt is use by card.
* If the interrupt is used, then gets the interrupt line from the
* openfirmware and sets it in the pci_dev and pci_config line.
*/
static int pci_read_irq_line(struct pci_dev *pci_dev)
{
int virq;
pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
/* Try to get a mapping from the device-tree */
virq = of_irq_parse_and_map_pci(pci_dev, 0, 0);
if (virq <= 0) {
u8 line, pin;
/* If that fails, lets fallback to what is in the config
* space and map that through the default controller. We
* also set the type to level low since that's what PCI
* interrupts are. If your platform does differently, then
* either provide a proper interrupt tree or don't use this
* function.
*/
if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
return -1;
if (pin == 0)
return -1;
if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
line == 0xff || line == 0) {
return -1;
}
pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
line, pin);
virq = irq_create_mapping(NULL, line);
if (virq)
irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
}
if (!virq) {
pr_debug(" Failed to map !\n");
return -1;
}
pr_debug(" Mapped to linux irq %d\n", virq);
pci_dev->irq = virq;
return 0;
}
/*
* Platform support for /proc/bus/pci/X/Y mmap()s.
* -- paulus.
*/
int pci_iobar_pfn(struct pci_dev *pdev, int bar, struct vm_area_struct *vma)
{
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
resource_size_t ioaddr = pci_resource_start(pdev, bar);
if (!hose)
return -EINVAL;
/* Convert to an offset within this PCI controller */
ioaddr -= (unsigned long)hose->io_base_virt - _IO_BASE;
vma->vm_pgoff += (ioaddr + hose->io_base_phys) >> PAGE_SHIFT;
return 0;
}
/*
* This one is used by /dev/mem and fbdev who have no clue about the
* PCI device, it tries to find the PCI device first and calls the
* above routine
*/
pgprot_t pci_phys_mem_access_prot(struct file *file,
unsigned long pfn,
unsigned long size,
pgprot_t prot)
{
struct pci_dev *pdev = NULL;
struct resource *found = NULL;
resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT;
int i;
if (page_is_ram(pfn))
return prot;
prot = pgprot_noncached(prot);
for_each_pci_dev(pdev) {
for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
struct resource *rp = &pdev->resource[i];
int flags = rp->flags;
/* Active and same type? */
if ((flags & IORESOURCE_MEM) == 0)
continue;
/* In the range of this resource? */
if (offset < (rp->start & PAGE_MASK) ||
offset > rp->end)
continue;
found = rp;
break;
}
if (found)
break;
}
if (found) {
if (found->flags & IORESOURCE_PREFETCH)
prot = pgprot_noncached_wc(prot);
pci_dev_put(pdev);
}
pr_debug("PCI: Non-PCI map for %llx, prot: %lx\n",
(unsigned long long)offset, pgprot_val(prot));
return prot;
}
/* This provides legacy IO read access on a bus */
int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size)
{
unsigned long offset;
struct pci_controller *hose = pci_bus_to_host(bus);
struct resource *rp = &hose->io_resource;
void __iomem *addr;
/* Check if port can be supported by that bus. We only check
* the ranges of the PHB though, not the bus itself as the rules
* for forwarding legacy cycles down bridges are not our problem
* here. So if the host bridge supports it, we do it.
*/
offset = (unsigned long)hose->io_base_virt - _IO_BASE;
offset += port;
if (!(rp->flags & IORESOURCE_IO))
return -ENXIO;
if (offset < rp->start || (offset + size) > rp->end)
return -ENXIO;
addr = hose->io_base_virt + port;
switch(size) {
case 1:
*((u8 *)val) = in_8(addr);
return 1;
case 2:
if (port & 1)
return -EINVAL;
*((u16 *)val) = in_le16(addr);
return 2;
case 4:
if (port & 3)
return -EINVAL;
*((u32 *)val) = in_le32(addr);
return 4;
}
return -EINVAL;
}
/* This provides legacy IO write access on a bus */
int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size)
{
unsigned long offset;
struct pci_controller *hose = pci_bus_to_host(bus);
struct resource *rp = &hose->io_resource;
void __iomem *addr;
/* Check if port can be supported by that bus. We only check
* the ranges of the PHB though, not the bus itself as the rules
* for forwarding legacy cycles down bridges are not our problem
* here. So if the host bridge supports it, we do it.
*/
offset = (unsigned long)hose->io_base_virt - _IO_BASE;
offset += port;
if (!(rp->flags & IORESOURCE_IO))
return -ENXIO;
if (offset < rp->start || (offset + size) > rp->end)
return -ENXIO;
addr = hose->io_base_virt + port;
/* WARNING: The generic code is idiotic. It gets passed a pointer
* to what can be a 1, 2 or 4 byte quantity and always reads that
* as a u32, which means that we have to correct the location of
* the data read within those 32 bits for size 1 and 2
*/
switch(size) {
case 1:
out_8(addr, val >> 24);
return 1;
case 2:
if (port & 1)
return -EINVAL;
out_le16(addr, val >> 16);
return 2;
case 4:
if (port & 3)
return -EINVAL;
out_le32(addr, val);
return 4;
}
return -EINVAL;
}
/* This provides legacy IO or memory mmap access on a bus */
int pci_mmap_legacy_page_range(struct pci_bus *bus,
struct vm_area_struct *vma,
enum pci_mmap_state mmap_state)
{
struct pci_controller *hose = pci_bus_to_host(bus);
resource_size_t offset =
((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
resource_size_t size = vma->vm_end - vma->vm_start;
struct resource *rp;
pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n",
pci_domain_nr(bus), bus->number,
mmap_state == pci_mmap_mem ? "MEM" : "IO",
(unsigned long long)offset,
(unsigned long long)(offset + size - 1));
if (mmap_state == pci_mmap_mem) {
/* Hack alert !
*
* Because X is lame and can fail starting if it gets an error trying
* to mmap legacy_mem (instead of just moving on without legacy memory
* access) we fake it here by giving it anonymous memory, effectively
* behaving just like /dev/zero
*/
if ((offset + size) > hose->isa_mem_size) {
printk(KERN_DEBUG
"Process %s (pid:%d) mapped non-existing PCI legacy memory for 0%04x:%02x\n",
current->comm, current->pid, pci_domain_nr(bus), bus->number);
if (vma->vm_flags & VM_SHARED)
return shmem_zero_setup(vma);
return 0;
}
offset += hose->isa_mem_phys;
} else {
unsigned long io_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
unsigned long roffset = offset + io_offset;
rp = &hose->io_resource;
if (!(rp->flags & IORESOURCE_IO))
return -ENXIO;
if (roffset < rp->start || (roffset + size) > rp->end)
return -ENXIO;
offset += hose->io_base_phys;
}
pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset);
vma->vm_pgoff = offset >> PAGE_SHIFT;
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
vma->vm_end - vma->vm_start,
vma->vm_page_prot);
}
void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc,
resource_size_t *start, resource_size_t *end)
{
struct pci_bus_region region;
if (rsrc->flags & IORESOURCE_IO) {
pcibios_resource_to_bus(dev->bus, &region,
(struct resource *) rsrc);
*start = region.start;
*end = region.end;
return;
}
/* We pass a CPU physical address to userland for MMIO instead of a
* BAR value because X is lame and expects to be able to use that
* to pass to /dev/mem!
*
* That means we may have 64-bit values where some apps only expect
* 32 (like X itself since it thinks only Sparc has 64-bit MMIO).
*/
*start = rsrc->start;
*end = rsrc->end;
}
/**
* pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
* @hose: newly allocated pci_controller to be setup
* @dev: device node of the host bridge
* @primary: set if primary bus (32 bits only, soon to be deprecated)
*
* This function will parse the "ranges" property of a PCI host bridge device
* node and setup the resource mapping of a pci controller based on its
* content.
*
* Life would be boring if it wasn't for a few issues that we have to deal
* with here:
*
* - We can only cope with one IO space range and up to 3 Memory space
* ranges. However, some machines (thanks Apple !) tend to split their
* space into lots of small contiguous ranges. So we have to coalesce.
*
* - Some busses have IO space not starting at 0, which causes trouble with
* the way we do our IO resource renumbering. The code somewhat deals with
* it for 64 bits but I would expect problems on 32 bits.
*
* - Some 32 bits platforms such as 4xx can have physical space larger than
* 32 bits so we need to use 64 bits values for the parsing
*/
void pci_process_bridge_OF_ranges(struct pci_controller *hose,
struct device_node *dev, int primary)
{
int memno = 0;
struct resource *res;
struct of_pci_range range;
struct of_pci_range_parser parser;
printk(KERN_INFO "PCI host bridge %pOF %s ranges:\n",
dev, primary ? "(primary)" : "");
/* Check for ranges property */
if (of_pci_range_parser_init(&parser, dev))
return;
/* Parse it */
for_each_of_pci_range(&parser, &range) {
/* If we failed translation or got a zero-sized region
* (some FW try to feed us with non sensical zero sized regions
* such as power3 which look like some kind of attempt at exposing
* the VGA memory hole)
*/
if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
continue;
/* Act based on address space type */
res = NULL;
switch (range.flags & IORESOURCE_TYPE_BITS) {
case IORESOURCE_IO:
printk(KERN_INFO
" IO 0x%016llx..0x%016llx -> 0x%016llx\n",
range.cpu_addr, range.cpu_addr + range.size - 1,
range.pci_addr);
/* We support only one IO range */
if (hose->pci_io_size) {
printk(KERN_INFO
" \\--> Skipped (too many) !\n");
continue;
}
#ifdef CONFIG_PPC32
/* On 32 bits, limit I/O space to 16MB */
if (range.size > 0x01000000)
range.size = 0x01000000;
/* 32 bits needs to map IOs here */
hose->io_base_virt = ioremap(range.cpu_addr,
range.size);
/* Expect trouble if pci_addr is not 0 */
if (primary)
isa_io_base =
(unsigned long)hose->io_base_virt;
#endif /* CONFIG_PPC32 */
/* pci_io_size and io_base_phys always represent IO
* space starting at 0 so we factor in pci_addr
*/
hose->pci_io_size = range.pci_addr + range.size;
hose->io_base_phys = range.cpu_addr - range.pci_addr;
/* Build resource */
res = &hose->io_resource;
range.cpu_addr = range.pci_addr;
break;
case IORESOURCE_MEM:
printk(KERN_INFO
" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
range.cpu_addr, range.cpu_addr + range.size - 1,
range.pci_addr,
(range.pci_space & 0x40000000) ?
"Prefetch" : "");
/* We support only 3 memory ranges */
if (memno >= 3) {
printk(KERN_INFO
" \\--> Skipped (too many) !\n");
continue;
}
/* Handles ISA memory hole space here */
if (range.pci_addr == 0) {
if (primary || isa_mem_base == 0)
isa_mem_base = range.cpu_addr;
hose->isa_mem_phys = range.cpu_addr;
hose->isa_mem_size = range.size;
}
/* Build resource */
hose->mem_offset[memno] = range.cpu_addr -
range.pci_addr;
res = &hose->mem_resources[memno++];
break;
}
if (res != NULL) {
res->name = dev->full_name;
res->flags = range.flags;
res->start = range.cpu_addr;
res->end = range.cpu_addr + range.size - 1;
res->parent = res->child = res->sibling = NULL;
}
}
}
/* Decide whether to display the domain number in /proc */
int pci_proc_domain(struct pci_bus *bus)
{
struct pci_controller *hose = pci_bus_to_host(bus);
if (!pci_has_flag(PCI_ENABLE_PROC_DOMAINS))
return 0;
if (pci_has_flag(PCI_COMPAT_DOMAIN_0))
return hose->global_number != 0;
return 1;
}
int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
{
if (ppc_md.pcibios_root_bridge_prepare)
return ppc_md.pcibios_root_bridge_prepare(bridge);
return 0;
}
/* This header fixup will do the resource fixup for all devices as they are
* probed, but not for bridge ranges
*/
static void pcibios_fixup_resources(struct pci_dev *dev)
{
struct pci_controller *hose = pci_bus_to_host(dev->bus);
int i;
if (!hose) {
printk(KERN_ERR "No host bridge for PCI dev %s !\n",
pci_name(dev));
return;
}
if (dev->is_virtfn)
return;
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
struct resource *res = dev->resource + i;
struct pci_bus_region reg;
if (!res->flags)
continue;
/* If we're going to re-assign everything, we mark all resources
* as unset (and 0-base them). In addition, we mark BARs starting
* at 0 as unset as well, except if PCI_PROBE_ONLY is also set
* since in that case, we don't want to re-assign anything
*/
pcibios_resource_to_bus(dev->bus, &reg, res);
if (pci_has_flag(PCI_REASSIGN_ALL_RSRC) ||
(reg.start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) {
/* Only print message if not re-assigning */
if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC))
pr_debug("PCI:%s Resource %d %pR is unassigned\n",
pci_name(dev), i, res);
res->end -= res->start;
res->start = 0;
res->flags |= IORESOURCE_UNSET;
continue;
}
pr_debug("PCI:%s Resource %d %pR\n", pci_name(dev), i, res);
}
/* Call machine specific resource fixup */
if (ppc_md.pcibios_fixup_resources)
ppc_md.pcibios_fixup_resources(dev);
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
/* This function tries to figure out if a bridge resource has been initialized
* by the firmware or not. It doesn't have to be absolutely bullet proof, but
* things go more smoothly when it gets it right. It should covers cases such
* as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges
*/
static int pcibios_uninitialized_bridge_resource(struct pci_bus *bus,
struct resource *res)
{
struct pci_controller *hose = pci_bus_to_host(bus);
struct pci_dev *dev = bus->self;
resource_size_t offset;
struct pci_bus_region region;
u16 command;
int i;
/* We don't do anything if PCI_PROBE_ONLY is set */
if (pci_has_flag(PCI_PROBE_ONLY))
return 0;
/* Job is a bit different between memory and IO */
if (res->flags & IORESOURCE_MEM) {
pcibios_resource_to_bus(dev->bus, &region, res);
/* If the BAR is non-0 then it's probably been initialized */
if (region.start != 0)
return 0;
/* The BAR is 0, let's check if memory decoding is enabled on
* the bridge. If not, we consider it unassigned
*/
pci_read_config_word(dev, PCI_COMMAND, &command);
if ((command & PCI_COMMAND_MEMORY) == 0)
return 1;
/* Memory decoding is enabled and the BAR is 0. If any of the bridge
* resources covers that starting address (0 then it's good enough for
* us for memory space)
*/
for (i = 0; i < 3; i++) {
if ((hose->mem_resources[i].flags & IORESOURCE_MEM) &&
hose->mem_resources[i].start == hose->mem_offset[i])
return 0;
}
/* Well, it starts at 0 and we know it will collide so we may as
* well consider it as unassigned. That covers the Apple case.
*/
return 1;
} else {
/* If the BAR is non-0, then we consider it assigned */
offset = (unsigned long)hose->io_base_virt - _IO_BASE;
if (((res->start - offset) & 0xfffffffful) != 0)
return 0;
/* Here, we are a bit different than memory as typically IO space
* starting at low addresses -is- valid. What we do instead if that
* we consider as unassigned anything that doesn't have IO enabled
* in the PCI command register, and that's it.
*/
pci_read_config_word(dev, PCI_COMMAND, &command);
if (command & PCI_COMMAND_IO)
return 0;
/* It's starting at 0 and IO is disabled in the bridge, consider
* it unassigned
*/
return 1;
}
}
/* Fixup resources of a PCI<->PCI bridge */
static void pcibios_fixup_bridge(struct pci_bus *bus)
{
struct resource *res;
int i;
struct pci_dev *dev = bus->self;
pci_bus_for_each_resource(bus, res, i) {
if (!res || !res->flags)
continue;
if (i >= 3 && bus->self->transparent)
continue;
/* If we're going to reassign everything, we can
* shrink the P2P resource to have size as being
* of 0 in order to save space.
*/
if (pci_has_flag(PCI_REASSIGN_ALL_RSRC)) {
res->flags |= IORESOURCE_UNSET;
res->start = 0;
res->end = -1;
continue;
}
pr_debug("PCI:%s Bus rsrc %d %pR\n", pci_name(dev), i, res);
/* Try to detect uninitialized P2P bridge resources,
* and clear them out so they get re-assigned later
*/
if (pcibios_uninitialized_bridge_resource(bus, res)) {
res->flags = 0;
pr_debug("PCI:%s (unassigned)\n", pci_name(dev));
}
}
}
void pcibios_setup_bus_self(struct pci_bus *bus)
{
struct pci_controller *phb;
/* Fix up the bus resources for P2P bridges */
if (bus->self != NULL)
pcibios_fixup_bridge(bus);
/* Platform specific bus fixups. This is currently only used
* by fsl_pci and I'm hoping to get rid of it at some point
*/
if (ppc_md.pcibios_fixup_bus)
ppc_md.pcibios_fixup_bus(bus);
/* Setup bus DMA mappings */
phb = pci_bus_to_host(bus);
if (phb->controller_ops.dma_bus_setup)
phb->controller_ops.dma_bus_setup(bus);
}
void pcibios_bus_add_device(struct pci_dev *dev)
{
struct pci_controller *phb;
/* Fixup NUMA node as it may not be setup yet by the generic
* code and is needed by the DMA init
*/
set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
/* Hook up default DMA ops */
set_dma_ops(&dev->dev, pci_dma_ops);
dev->dev.archdata.dma_offset = PCI_DRAM_OFFSET;
/* Additional platform DMA/iommu setup */
phb = pci_bus_to_host(dev->bus);
if (phb->controller_ops.dma_dev_setup)
phb->controller_ops.dma_dev_setup(dev);
/* Read default IRQs and fixup if necessary */
pci_read_irq_line(dev);
if (ppc_md.pci_irq_fixup)
ppc_md.pci_irq_fixup(dev);
if (ppc_md.pcibios_bus_add_device)
ppc_md.pcibios_bus_add_device(dev);
}
int pcibios_add_device(struct pci_dev *dev)
{
#ifdef CONFIG_PCI_IOV
if (ppc_md.pcibios_fixup_sriov)
ppc_md.pcibios_fixup_sriov(dev);
#endif /* CONFIG_PCI_IOV */
return 0;
}
void pcibios_set_master(struct pci_dev *dev)
{
/* No special bus mastering setup handling */
}
void pcibios_fixup_bus(struct pci_bus *bus)
{
/* When called from the generic PCI probe, read PCI<->PCI bridge
* bases. This is -not- called when generating the PCI tree from
* the OF device-tree.
*/
pci_read_bridge_bases(bus);
/* Now fixup the bus bus */
pcibios_setup_bus_self(bus);
}
EXPORT_SYMBOL(pcibios_fixup_bus);
static int skip_isa_ioresource_align(struct pci_dev *dev)
{
if (pci_has_flag(PCI_CAN_SKIP_ISA_ALIGN) &&
!(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA))
return 1;
return 0;
}
/*
* We need to avoid collisions with `mirrored' VGA ports
* and other strange ISA hardware, so we always want the
* addresses to be allocated in the 0x000-0x0ff region
* modulo 0x400.
*
* Why? Because some silly external IO cards only decode
* the low 10 bits of the IO address. The 0x00-0xff region
* is reserved for motherboard devices that decode all 16
* bits, so it's ok to allocate at, say, 0x2800-0x28ff,
* but we want to try to avoid allocating at 0x2900-0x2bff
* which might have be mirrored at 0x0100-0x03ff..
*/
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
if (skip_isa_ioresource_align(dev))
return start;
if (start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
}
return start;
}
EXPORT_SYMBOL(pcibios_align_resource);
/*
* Reparent resource children of pr that conflict with res
* under res, and make res replace those children.
*/
static int reparent_resources(struct resource *parent,
struct resource *res)
{
struct resource *p, **pp;
struct resource **firstpp = NULL;
for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
if (p->end < res->start)
continue;
if (res->end < p->start)
break;
if (p->start < res->start || p->end > res->end)
return -1; /* not completely contained */
if (firstpp == NULL)
firstpp = pp;
}
if (firstpp == NULL)
return -1; /* didn't find any conflicting entries? */
res->parent = parent;
res->child = *firstpp;
res->sibling = *pp;
*firstpp = res;
*pp = NULL;
for (p = res->child; p != NULL; p = p->sibling) {
p->parent = res;
pr_debug("PCI: Reparented %s %pR under %s\n",
p->name, p, res->name);
}
return 0;
}
/*
* Handle resources of PCI devices. If the world were perfect, we could
* just allocate all the resource regions and do nothing more. It isn't.
* On the other hand, we cannot just re-allocate all devices, as it would
* require us to know lots of host bridge internals. So we attempt to
* keep as much of the original configuration as possible, but tweak it
* when it's found to be wrong.
*
* Known BIOS problems we have to work around:
* - I/O or memory regions not configured
* - regions configured, but not enabled in the command register
* - bogus I/O addresses above 64K used
* - expansion ROMs left enabled (this may sound harmless, but given
* the fact the PCI specs explicitly allow address decoders to be
* shared between expansion ROMs and other resource regions, it's
* at least dangerous)
*
* Our solution:
* (1) Allocate resources for all buses behind PCI-to-PCI bridges.
* This gives us fixed barriers on where we can allocate.
* (2) Allocate resources for all enabled devices. If there is
* a collision, just mark the resource as unallocated. Also
* disable expansion ROMs during this step.
* (3) Try to allocate resources for disabled devices. If the
* resources were assigned correctly, everything goes well,
* if they weren't, they won't disturb allocation of other
* resources.
* (4) Assign new addresses to resources which were either
* not configured at all or misconfigured. If explicitly
* requested by the user, configure expansion ROM address
* as well.
*/
static void pcibios_allocate_bus_resources(struct pci_bus *bus)
{
struct pci_bus *b;
int i;
struct resource *res, *pr;
pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
pci_domain_nr(bus), bus->number);
pci_bus_for_each_resource(bus, res, i) {
if (!res || !res->flags || res->start > res->end || res->parent)
continue;
/* If the resource was left unset at this point, we clear it */
if (res->flags & IORESOURCE_UNSET)
goto clear_resource;
if (bus->parent == NULL)
pr = (res->flags & IORESOURCE_IO) ?
&ioport_resource : &iomem_resource;
else {
pr = pci_find_parent_resource(bus->self, res);
if (pr == res) {
/* this happens when the generic PCI
* code (wrongly) decides that this
* bridge is transparent -- paulus
*/
continue;
}
}
pr_debug("PCI: %s (bus %d) bridge rsrc %d: %pR, parent %p (%s)\n",
bus->self ? pci_name(bus->self) : "PHB", bus->number,
i, res, pr, (pr && pr->name) ? pr->name : "nil");
if (pr && !(pr->flags & IORESOURCE_UNSET)) {
struct pci_dev *dev = bus->self;
if (request_resource(pr, res) == 0)
continue;
/*
* Must be a conflict with an existing entry.
* Move that entry (or entries) under the
* bridge resource and try again.
*/
if (reparent_resources(pr, res) == 0)
continue;
if (dev && i < PCI_BRIDGE_RESOURCE_NUM &&
pci_claim_bridge_resource(dev,
i + PCI_BRIDGE_RESOURCES) == 0)
continue;
}
pr_warn("PCI: Cannot allocate resource region %d of PCI bridge %d, will remap\n",
i, bus->number);
clear_resource:
/* The resource might be figured out when doing
* reassignment based on the resources required
* by the downstream PCI devices. Here we set
* the size of the resource to be 0 in order to
* save more space.
*/
res->start = 0;
res->end = -1;
res->flags = 0;
}
list_for_each_entry(b, &bus->children, node)
pcibios_allocate_bus_resources(b);
}
static inline void alloc_resource(struct pci_dev *dev, int idx)
{
struct resource *pr, *r = &dev->resource[idx];
pr_debug("PCI: Allocating %s: Resource %d: %pR\n",
pci_name(dev), idx, r);
pr = pci_find_parent_resource(dev, r);
if (!pr || (pr->flags & IORESOURCE_UNSET) ||
request_resource(pr, r) < 0) {
printk(KERN_WARNING "PCI: Cannot allocate resource region %d"
" of device %s, will remap\n", idx, pci_name(dev));
if (pr)
pr_debug("PCI: parent is %p: %pR\n", pr, pr);
/* We'll assign a new address later */
r->flags |= IORESOURCE_UNSET;
r->end -= r->start;
r->start = 0;
}
}
static void __init pcibios_allocate_resources(int pass)
{
struct pci_dev *dev = NULL;
int idx, disabled;
u16 command;
struct resource *r;
for_each_pci_dev(dev) {
pci_read_config_word(dev, PCI_COMMAND, &command);
for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
r = &dev->resource[idx];
if (r->parent) /* Already allocated */
continue;
if (!r->flags || (r->flags & IORESOURCE_UNSET))
continue; /* Not assigned at all */
/* We only allocate ROMs on pass 1 just in case they
* have been screwed up by firmware
*/
if (idx == PCI_ROM_RESOURCE )
disabled = 1;
if (r->flags & IORESOURCE_IO)
disabled = !(command & PCI_COMMAND_IO);
else
disabled = !(command & PCI_COMMAND_MEMORY);
if (pass == disabled)
alloc_resource(dev, idx);
}
if (pass)
continue;
r = &dev->resource[PCI_ROM_RESOURCE];
if (r->flags) {
/* Turn the ROM off, leave the resource region,
* but keep it unregistered.
*/
u32 reg;
pci_read_config_dword(dev, dev->rom_base_reg, &reg);
if (reg & PCI_ROM_ADDRESS_ENABLE) {
pr_debug("PCI: Switching off ROM of %s\n",
pci_name(dev));
r->flags &= ~IORESOURCE_ROM_ENABLE;
pci_write_config_dword(dev, dev->rom_base_reg,
reg & ~PCI_ROM_ADDRESS_ENABLE);
}
}
}
}
static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus)
{
struct pci_controller *hose = pci_bus_to_host(bus);
resource_size_t offset;
struct resource *res, *pres;
int i;
pr_debug("Reserving legacy ranges for domain %04x\n", pci_domain_nr(bus));
/* Check for IO */
if (!(hose->io_resource.flags & IORESOURCE_IO))
goto no_io;
offset = (unsigned long)hose->io_base_virt - _IO_BASE;
res = kzalloc(sizeof(struct resource), GFP_KERNEL);
BUG_ON(res == NULL);
res->name = "Legacy IO";
res->flags = IORESOURCE_IO;
res->start = offset;
res->end = (offset + 0xfff) & 0xfffffffful;
pr_debug("Candidate legacy IO: %pR\n", res);
if (request_resource(&hose->io_resource, res)) {
printk(KERN_DEBUG
"PCI %04x:%02x Cannot reserve Legacy IO %pR\n",
pci_domain_nr(bus), bus->number, res);
kfree(res);
}
no_io:
/* Check for memory */
for (i = 0; i < 3; i++) {
pres = &hose->mem_resources[i];
offset = hose->mem_offset[i];
if (!(pres->flags & IORESOURCE_MEM))
continue;
pr_debug("hose mem res: %pR\n", pres);
if ((pres->start - offset) <= 0xa0000 &&
(pres->end - offset) >= 0xbffff)
break;
}
if (i >= 3)
return;
res = kzalloc(sizeof(struct resource), GFP_KERNEL);
BUG_ON(res == NULL);
res->name = "Legacy VGA memory";
res->flags = IORESOURCE_MEM;
res->start = 0xa0000 + offset;
res->end = 0xbffff + offset;
pr_debug("Candidate VGA memory: %pR\n", res);
if (request_resource(pres, res)) {
printk(KERN_DEBUG
"PCI %04x:%02x Cannot reserve VGA memory %pR\n",
pci_domain_nr(bus), bus->number, res);
kfree(res);
}
}
void __init pcibios_resource_survey(void)
{
struct pci_bus *b;
/* Allocate and assign resources */
list_for_each_entry(b, &pci_root_buses, node)
pcibios_allocate_bus_resources(b);
if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC)) {
pcibios_allocate_resources(0);
pcibios_allocate_resources(1);
}
/* Before we start assigning unassigned resource, we try to reserve
* the low IO area and the VGA memory area if they intersect the
* bus available resources to avoid allocating things on top of them
*/
if (!pci_has_flag(PCI_PROBE_ONLY)) {
list_for_each_entry(b, &pci_root_buses, node)
pcibios_reserve_legacy_regions(b);
}
/* Now, if the platform didn't decide to blindly trust the firmware,
* we proceed to assigning things that were left unassigned
*/
if (!pci_has_flag(PCI_PROBE_ONLY)) {
pr_debug("PCI: Assigning unassigned resources...\n");
pci_assign_unassigned_resources();
}
}
/* This is used by the PCI hotplug driver to allocate resource
* of newly plugged busses. We can try to consolidate with the
* rest of the code later, for now, keep it as-is as our main
* resource allocation function doesn't deal with sub-trees yet.
*/
void pcibios_claim_one_bus(struct pci_bus *bus)
{
struct pci_dev *dev;
struct pci_bus *child_bus;
list_for_each_entry(dev, &bus->devices, bus_list) {
int i;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *r = &dev->resource[i];
if (r->parent || !r->start || !r->flags)
continue;
pr_debug("PCI: Claiming %s: Resource %d: %pR\n",
pci_name(dev), i, r);
if (pci_claim_resource(dev, i) == 0)
continue;
pci_claim_bridge_resource(dev, i);
}
}
list_for_each_entry(child_bus, &bus->children, node)
pcibios_claim_one_bus(child_bus);
}
EXPORT_SYMBOL_GPL(pcibios_claim_one_bus);
/* pcibios_finish_adding_to_bus
*
* This is to be called by the hotplug code after devices have been
* added to a bus, this include calling it for a PHB that is just
* being added
*/
void pcibios_finish_adding_to_bus(struct pci_bus *bus)
{
pr_debug("PCI: Finishing adding to hotplug bus %04x:%02x\n",
pci_domain_nr(bus), bus->number);
/* Allocate bus and devices resources */
pcibios_allocate_bus_resources(bus);
pcibios_claim_one_bus(bus);
if (!pci_has_flag(PCI_PROBE_ONLY)) {
if (bus->self)
pci_assign_unassigned_bridge_resources(bus->self);
else
pci_assign_unassigned_bus_resources(bus);
}
/* Add new devices to global lists. Register in proc, sysfs. */
pci_bus_add_devices(bus);
}
EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
struct pci_controller *phb = pci_bus_to_host(dev->bus);
if (phb->controller_ops.enable_device_hook)
if (!phb->controller_ops.enable_device_hook(dev))
return -EINVAL;
return pci_enable_resources(dev, mask);
}
void pcibios_disable_device(struct pci_dev *dev)
{
struct pci_controller *phb = pci_bus_to_host(dev->bus);
if (phb->controller_ops.disable_device)
phb->controller_ops.disable_device(dev);
}
resource_size_t pcibios_io_space_offset(struct pci_controller *hose)
{
return (unsigned long) hose->io_base_virt - _IO_BASE;
}
static void pcibios_setup_phb_resources(struct pci_controller *hose,
struct list_head *resources)
{
struct resource *res;
resource_size_t offset;
int i;
/* Hookup PHB IO resource */
res = &hose->io_resource;
if (!res->flags) {
pr_debug("PCI: I/O resource not set for host"
" bridge %pOF (domain %d)\n",
hose->dn, hose->global_number);
} else {
offset = pcibios_io_space_offset(hose);
pr_debug("PCI: PHB IO resource = %pR off 0x%08llx\n",
res, (unsigned long long)offset);
pci_add_resource_offset(resources, res, offset);
}
/* Hookup PHB Memory resources */
for (i = 0; i < 3; ++i) {
res = &hose->mem_resources[i];
if (!res->flags)
continue;
offset = hose->mem_offset[i];
pr_debug("PCI: PHB MEM resource %d = %pR off 0x%08llx\n", i,
res, (unsigned long long)offset);
pci_add_resource_offset(resources, res, offset);
}
}
/*
* Null PCI config access functions, for the case when we can't
* find a hose.
*/
#define NULL_PCI_OP(rw, size, type) \
static int \
null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \
{ \
return PCIBIOS_DEVICE_NOT_FOUND; \
}
static int
null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
int len, u32 *val)
{
return PCIBIOS_DEVICE_NOT_FOUND;
}
static int
null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
int len, u32 val)
{
return PCIBIOS_DEVICE_NOT_FOUND;
}
static struct pci_ops null_pci_ops =
{
.read = null_read_config,
.write = null_write_config,
};
/*
* These functions are used early on before PCI scanning is done
* and all of the pci_dev and pci_bus structures have been created.
*/
static struct pci_bus *
fake_pci_bus(struct pci_controller *hose, int busnr)
{
static struct pci_bus bus;
if (hose == NULL) {
printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
}
bus.number = busnr;
bus.sysdata = hose;
bus.ops = hose? hose->ops: &null_pci_ops;
return &bus;
}
#define EARLY_PCI_OP(rw, size, type) \
int early_##rw##_config_##size(struct pci_controller *hose, int bus, \
int devfn, int offset, type value) \
{ \
return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \
devfn, offset, value); \
}
EARLY_PCI_OP(read, byte, u8 *)
EARLY_PCI_OP(read, word, u16 *)
EARLY_PCI_OP(read, dword, u32 *)
EARLY_PCI_OP(write, byte, u8)
EARLY_PCI_OP(write, word, u16)
EARLY_PCI_OP(write, dword, u32)
int early_find_capability(struct pci_controller *hose, int bus, int devfn,
int cap)
{
return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
}
struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
{
struct pci_controller *hose = bus->sysdata;
return of_node_get(hose->dn);
}
/**
* pci_scan_phb - Given a pci_controller, setup and scan the PCI bus
* @hose: Pointer to the PCI host controller instance structure
*/
void pcibios_scan_phb(struct pci_controller *hose)
{
LIST_HEAD(resources);
struct pci_bus *bus;
struct device_node *node = hose->dn;
int mode;
pr_debug("PCI: Scanning PHB %pOF\n", node);
/* Get some IO space for the new PHB */
pcibios_setup_phb_io_space(hose);
/* Wire up PHB bus resources */
pcibios_setup_phb_resources(hose, &resources);
hose->busn.start = hose->first_busno;
hose->busn.end = hose->last_busno;
hose->busn.flags = IORESOURCE_BUS;
pci_add_resource(&resources, &hose->busn);
/* Create an empty bus for the toplevel */
bus = pci_create_root_bus(hose->parent, hose->first_busno,
hose->ops, hose, &resources);
if (bus == NULL) {
pr_err("Failed to create bus for PCI domain %04x\n",
hose->global_number);
pci_free_resource_list(&resources);
return;
}
hose->bus = bus;
/* Get probe mode and perform scan */
mode = PCI_PROBE_NORMAL;
if (node && hose->controller_ops.probe_mode)
mode = hose->controller_ops.probe_mode(bus);
pr_debug(" probe mode: %d\n", mode);
if (mode == PCI_PROBE_DEVTREE)
of_scan_bus(node, bus);
if (mode == PCI_PROBE_NORMAL) {
pci_bus_update_busn_res_end(bus, 255);
hose->last_busno = pci_scan_child_bus(bus);
pci_bus_update_busn_res_end(bus, hose->last_busno);
}
/* Platform gets a chance to do some global fixups before
* we proceed to resource allocation
*/
if (ppc_md.pcibios_fixup_phb)
ppc_md.pcibios_fixup_phb(hose);
/* Configure PCI Express settings */
if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
struct pci_bus *child;
list_for_each_entry(child, &bus->children, node)
pcie_bus_configure_settings(child);
}
}
EXPORT_SYMBOL_GPL(pcibios_scan_phb);
static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
{
int i, class = dev->class >> 8;
/* When configured as agent, programing interface = 1 */
int prog_if = dev->class & 0xf;
if ((class == PCI_CLASS_PROCESSOR_POWERPC ||
class == PCI_CLASS_BRIDGE_OTHER) &&
(dev->hdr_type == PCI_HEADER_TYPE_NORMAL) &&
(prog_if == 0) &&
(dev->bus->parent == NULL)) {
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
dev->resource[i].flags = 0;
}
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl);