linux-stable/arch/mips/boot
Linus Torvalds e109f50607 MTD core changes:
* Fix issue where write_cached_data() fails but write() still returns success
 * maps: sa1100-flash: Replace zero-length array with flexible-array member
 * phram: Fix a double free issue in error path
 * Convert fallthrough comments into statements
 * MAINTAINERS: Add the IRC channel to the MTD related subsystems
 
 Raw NAND core changes:
 * Add support for manufacturer specific suspend/resume operation
 * Add support for manufacturer specific lock/unlock operation
 * Replace zero-length array with flexible-array member
 * Fix a typo ("manufecturer")
 * Ensure nand_soft_waitrdy wait period is enough
 
 Raw NAND controller driver changes:
 * Brcmnand:
   - Add support for flash-edu for dma transfers (+ bindings)
 * Cadence:
   - Reinit completion before executing a new command
   - Change bad block marker size
   - Fix the calculation of the avaialble OOB size
   - Get meta data size from registers
 * Qualcom:
   - Use dma_request_chan() instead dma_request_slave_channel()
   - Release resources on failure within qcom_nandc_alloc()
 * Allwinner:
   - Use dma_request_chan() instead dma_request_slave_channel()
 * Marvell:
   - Use dma_request_chan() instead dma_request_slave_channel()
   - Release DMA channel on error
 * Freescale:
   - Use dma_request_chan() instead dma_request_slave_channel()
 * Macronix:
   - Add support for Macronix NAND randomizer (+ bindings)
 * Ams-delta:
   - Rename structures and functions to gpio_nand*
   - Make the driver custom I/O ready
   - Drop useless local variable
   - Support custom driver initialisation
   - Add module device tables
   - Handle more GPIO pins as optional
   - Make read pulses optional
   - Don't hardcode read/write pulse widths
   - Push inversion handling to gpiolib
   - Enable OF partition info support
   - Drop board specific partition info
   - Use struct gpio_nand_platdata
   - Write protect device during probe
 * Ingenic:
   - Use devm_platform_ioremap_resource()
   - Add dependency on MIPS || COMPILE_TEST
 * Denali:
   - Deassert write protect pin
 * ST:
   - Use dma_request_chan() instead dma_request_slave_channel()
 
 Raw NAND chip driver changes:
 * Toshiba:
   - Support reading the number of bitflips for BENAND (Built-in ECC NAND)
 * Macronix:
   - Add support for deep power down mode
   - Add support for block protection
 
 SPI-NAND core changes:
 * Do not erase the block before writing a bad block marker
 * Explicitly use MTD_OPS_RAW to write the bad block marker to OOB
 * Stop using spinand->oobbuf for buffering bad block markers
 * Rework detect procedure for different READ_ID operation
 
 SPI-NAND driver changes:
 * Toshiba:
   - Support for new Kioxia Serial NAND
   - Rename function name to change suffix and prefix (8Gbit)
   - Add comment about Kioxia ID
 * Micron:
   - Add new Micron SPI NAND devices with multiple dies
   - Add M70A series Micron SPI NAND devices
   - identify SPI NAND device with Continuous Read mode
   - Add new Micron SPI NAND devices
   - Describe the SPI NAND device MT29F2G01ABAGD
   - Generalize the OOB layout structure and function names
 
 SPI NOR core changes:
 * Move all the manufacturer specific quirks/code out of the core,
   to make the core logic more readable and thus ease maintenance.
 * Move the SFDP logic out of the core, it provides a better
   separation between the SFDP parsing and core logic.
 * Trim what is exposed in spi-nor.h. The SPI NOR controllers drivers
   must not be able to use structures that are meant just for the
   SPI NOR core.
 * Use the spi-mem direct mapping API to let advanced controllers
   optimize the read/write operations when they support direct mapping.
 * Add generic formula for the Status Register block protection
   handling. It fixes some long standing locking limitations and eases
   the addition of the 4bit block protection support.
 * Add block protection support for flashes with 4 block protection
   bits in the Status Register.
 
 SPI NOR controller drivers changes:
 * The mtk-quadspi driver is replaced by the new spi-mem spi-mtk-nor
   driver.
 * Merge tag 'mtk-mtd-spi-move' into spi-nor/next to avoid conflicts.
 
 HyperBus changes:
 * Print error msg when compatible is wrong or missing
 * Move mapping of direct access window from core to individual drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl6GEU8ACgkQJWrqGEe9
 VoSQ8gf/WV1vfxfAlgKRQ6WGkdrI+EndmciKx/sqf9KfAu6uNLHx3qcxQeibqvgC
 KmIgJbCLXhgCUBZQLqyjqHtO3zImgPI2WWWR/tkieNaT9NT5jrAunYZpiqkCkjVD
 HjML4iVcLwDJoHPZWTTTsFWd2cDLA8nFVXJQeaGRgdsx3j3D9OSOnfLGTUGfcg2H
 lC0BxA6JRO7tdZlErqzy9BXUasjO5C7rsRzqgTiGT4h/H2yhYmDQhMW+Kz86zWiB
 XdZsZJ2qLlTKntQmzR+30vbolId3iZqsO9q0mVkqWd2UQn5TpmmzNqLoYA6ys8KK
 lW/1E53E3/Pq0+5ejGbD5m4afff+nw==
 =/p2x
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Miquel Raynal:
 "MTD core changes:
   - Fix issue where write_cached_data() fails but write() still returns
     success

   - maps: sa1100-flash: Replace zero-length array with flexible-array
     member

   - phram: Fix a double free issue in error path

   - Convert fallthrough comments into statements

   - MAINTAINERS: Add the IRC channel to the MTD related subsystems

  Raw NAND core changes:
   - Add support for manufacturer specific suspend/resume operation

   - Add support for manufacturer specific lock/unlock operation

   - Replace zero-length array with flexible-array member

   - Fix a typo ("manufecturer")

   - Ensure nand_soft_waitrdy wait period is enough

  Raw NAND controller driver changes:
   - Brcmnand:
       * Add support for flash-edu for dma transfers (+ bindings)

   - Cadence:
       * Reinit completion before executing a new command
       * Change bad block marker size
       * Fix the calculation of the avaialble OOB size
       * Get meta data size from registers

   - Qualcom:
       * Use dma_request_chan() instead dma_request_slave_channel()
       * Release resources on failure within qcom_nandc_alloc()

   - Allwinner:
       * Use dma_request_chan() instead dma_request_slave_channel()

   - Marvell:
       * Use dma_request_chan() instead dma_request_slave_channel()
       * Release DMA channel on error

   - Freescale:
       * Use dma_request_chan() instead dma_request_slave_channel()

   - Macronix:
       * Add support for Macronix NAND randomizer (+ bindings)

   - Ams-delta:
       * Rename structures and functions to gpio_nand*
       * Make the driver custom I/O ready
       * Drop useless local variable
       * Support custom driver initialisation
       * Add module device tables
       * Handle more GPIO pins as optional
       * Make read pulses optional
       * Don't hardcode read/write pulse widths
       * Push inversion handling to gpiolib
       * Enable OF partition info support
       * Drop board specific partition info
       * Use struct gpio_nand_platdata
       * Write protect device during probe

   - Ingenic:
       * Use devm_platform_ioremap_resource()
       * Add dependency on MIPS || COMPILE_TEST

   - Denali:
       * Deassert write protect pin

   - ST:
       * Use dma_request_chan() instead dma_request_slave_channel()

  Raw NAND chip driver changes:
   - Toshiba:
       * Support reading the number of bitflips for BENAND (Built-in ECC NAND)

   - Macronix:
       * Add support for deep power down mode
       * Add support for block protection

  SPI-NAND core changes:
   - Do not erase the block before writing a bad block marker

   - Explicitly use MTD_OPS_RAW to write the bad block marker to OOB

   - Stop using spinand->oobbuf for buffering bad block markers

   - Rework detect procedure for different READ_ID operation

  SPI-NAND driver changes:
   - Toshiba:
       * Support for new Kioxia Serial NAND
       * Rename function name to change suffix and prefix (8Gbit)
       * Add comment about Kioxia ID

   - Micron:
       * Add new Micron SPI NAND devices with multiple dies
       * Add M70A series Micron SPI NAND devices
       * identify SPI NAND device with Continuous Read mode
       * Add new Micron SPI NAND devices
       * Describe the SPI NAND device MT29F2G01ABAGD
       * Generalize the OOB layout structure and function names

  SPI NOR core changes:
   - Move all the manufacturer specific quirks/code out of the core, to
     make the core logic more readable and thus ease maintenance.

   - Move the SFDP logic out of the core, it provides a better
     separation between the SFDP parsing and core logic.

   - Trim what is exposed in spi-nor.h. The SPI NOR controllers drivers
     must not be able to use structures that are meant just for the SPI
     NOR core.

   - Use the spi-mem direct mapping API to let advanced controllers
     optimize the read/write operations when they support direct
     mapping.

   - Add generic formula for the Status Register block protection
     handling. It fixes some long standing locking limitations and eases
     the addition of the 4bit block protection support.

   - Add block protection support for flashes with 4 block protection
     bits in the Status Register.

  SPI NOR controller drivers changes:
   - The mtk-quadspi driver is replaced by the new spi-mem spi-mtk-nor
     driver.

   - Merge tag 'mtk-mtd-spi-move' into spi-nor/next to avoid conflicts.

  HyperBus changes:
   - Print error msg when compatible is wrong or missing

   - Move mapping of direct access window from core to individual
     drivers"

* tag 'mtd/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (103 commits)
  mtd: Convert fallthrough comments into statements
  mtd: rawnand: toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND)
  MAINTAINERS: Add the IRC channel to the MTD related subsystems
  mtd: Fix issue where write_cached_data() fails but write() still returns success
  mtd: maps: sa1100-flash: Replace zero-length array with flexible-array member
  mtd: phram: fix a double free issue in error path
  mtd: spinand: toshiba: Support for new Kioxia Serial NAND
  mtd: spinand: toshiba: Rename function name to change suffix and prefix (8Gbit)
  mtd: rawnand: macronix: Add support for deep power down mode
  mtd: rawnand: Add support for manufacturer specific suspend/resume operation
  mtd: spi-nor: Enable locking for n25q512ax3/n25q512a
  mtd: spi-nor: Add SR 4bit block protection support
  mtd: spi-nor: Add generic formula for SR block protection handling
  mtd: spi-nor: Set all BP bits to one when lock_len == mtd->size
  mtd: spi-nor: controllers: aspeed-smc: Replace zero-length array with flexible-array member
  mtd: spi-nor: Clear WEL bit when erase or program errors occur
  MAINTAINERS: update entry after SPI NOR controller move
  mtd: spi-nor: Trim what is exposed in spi-nor.h
  mtd: spi-nor: Drop the MFR definitions
  mtd: spi-nor: Get rid of the now empty spi_nor_ids[] table
  ...
2020-04-02 16:45:46 -07:00
..
compressed kbuild: rename hostprogs-y/always to hostprogs/always-y 2020-02-04 01:53:07 +09:00
dts MTD core changes: 2020-04-02 16:45:46 -07:00
tools kbuild: rename hostprogs-y/always to hostprogs/always-y 2020-02-04 01:53:07 +09:00
.gitignore .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore 2017-11-08 11:20:24 -06:00
ecoff.h MIPS: Make elf2ecoff work on 64bit host machines 2018-06-24 09:25:24 -07:00
elf2ecoff.c MIPS: Make elf2ecoff work on 64bit host machines 2018-06-24 09:25:24 -07:00
Makefile kbuild: rename hostprogs-y/always to hostprogs/always-y 2020-02-04 01:53:07 +09:00