linux-stable/arch/powerpc/platforms/8xx/cpm1.c
Christophe Leroy acf9e575d8 powerpc/8xx: Move CPM interrupt controller into a dedicated file
CPM interrupt controller is quite standalone. Move it into a
dedicated file. It will help for next step which will change
it to a platform driver.

This is pure code move, checkpatch report is ignored at this point,
except one parenthesis alignment which would remain at the end of
the series. All other points fly away with following patches.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d3a7dc832d905bed14b35d83410cdb69a7ba20e8.1649226186.git.christophe.leroy@csgroup.eu
2022-05-11 23:06:39 +10:00

640 lines
15 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* General Purpose functions for the global management of the
* Communication Processor Module.
* Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
*
* In addition to the individual control of the communication
* channels, there are a few functions that globally affect the
* communication processor.
*
* Buffer descriptors must be allocated from the dual ported memory
* space. The allocator for that is here. When the communication
* process is reset, we reclaim the memory available. There is
* currently no deallocator for this memory.
* The amount of space available is platform dependent. On the
* MBX, the EPPC software loads additional microcode into the
* communication processor, and uses some of the DP ram for this
* purpose. Current, the first 512 bytes and the last 256 bytes of
* memory are used. Right now I am conservative and only use the
* memory that can never be used for microcode. If there are
* applications that require more DP ram, we can expand the boundaries
* but then we have to be careful of any downloaded microcode.
*/
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/of_irq.h>
#include <asm/page.h>
#include <asm/8xx_immap.h>
#include <asm/cpm1.h>
#include <asm/io.h>
#include <asm/rheap.h>
#include <asm/cpm.h>
#include <asm/fs_pd.h>
#ifdef CONFIG_8xx_GPIO
#include <linux/of_gpio.h>
#endif
#define CPM_MAP_SIZE (0x4000)
cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */
immap_t __iomem *mpc8xx_immr = (void __iomem *)VIRT_IMMR_BASE;
void __init cpm_reset(void)
{
sysconf8xx_t __iomem *siu_conf;
cpmp = &mpc8xx_immr->im_cpm;
#ifndef CONFIG_PPC_EARLY_DEBUG_CPM
/* Perform a reset. */
out_be16(&cpmp->cp_cpcr, CPM_CR_RST | CPM_CR_FLG);
/* Wait for it. */
while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG);
#endif
#ifdef CONFIG_UCODE_PATCH
cpm_load_patch(cpmp);
#endif
/*
* Set SDMA Bus Request priority 5.
* On 860T, this also enables FEC priority 6. I am not sure
* this is what we really want for some applications, but the
* manual recommends it.
* Bit 25, FAM can also be set to use FEC aggressive mode (860T).
*/
siu_conf = immr_map(im_siu_conf);
if ((mfspr(SPRN_IMMR) & 0xffff) == 0x0900) /* MPC885 */
out_be32(&siu_conf->sc_sdcr, 0x40);
else
out_be32(&siu_conf->sc_sdcr, 1);
immr_unmap(siu_conf);
}
static DEFINE_SPINLOCK(cmd_lock);
#define MAX_CR_CMD_LOOPS 10000
int cpm_command(u32 command, u8 opcode)
{
int i, ret;
unsigned long flags;
if (command & 0xffffff0f)
return -EINVAL;
spin_lock_irqsave(&cmd_lock, flags);
ret = 0;
out_be16(&cpmp->cp_cpcr, command | CPM_CR_FLG | (opcode << 8));
for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
goto out;
printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
ret = -EIO;
out:
spin_unlock_irqrestore(&cmd_lock, flags);
return ret;
}
EXPORT_SYMBOL(cpm_command);
/*
* Set a baud rate generator. This needs lots of work. There are
* four BRGs, any of which can be wired to any channel.
* The internal baud rate clock is the system clock divided by 16.
* This assumes the baudrate is 16x oversampled by the uart.
*/
#define BRG_INT_CLK (get_brgfreq())
#define BRG_UART_CLK (BRG_INT_CLK/16)
#define BRG_UART_CLK_DIV16 (BRG_UART_CLK/16)
void
cpm_setbrg(uint brg, uint rate)
{
u32 __iomem *bp;
/* This is good enough to get SMCs running..... */
bp = &cpmp->cp_brgc1;
bp += brg;
/*
* The BRG has a 12-bit counter. For really slow baud rates (or
* really fast processors), we may have to further divide by 16.
*/
if (((BRG_UART_CLK / rate) - 1) < 4096)
out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
else
out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
CPM_BRG_EN | CPM_BRG_DIV16);
}
EXPORT_SYMBOL(cpm_setbrg);
struct cpm_ioport16 {
__be16 dir, par, odr_sor, dat, intr;
__be16 res[3];
};
struct cpm_ioport32b {
__be32 dir, par, odr, dat;
};
struct cpm_ioport32e {
__be32 dir, par, sor, odr, dat;
};
static void __init cpm1_set_pin32(int port, int pin, int flags)
{
struct cpm_ioport32e __iomem *iop;
pin = 1 << (31 - pin);
if (port == CPM_PORTB)
iop = (struct cpm_ioport32e __iomem *)
&mpc8xx_immr->im_cpm.cp_pbdir;
else
iop = (struct cpm_ioport32e __iomem *)
&mpc8xx_immr->im_cpm.cp_pedir;
if (flags & CPM_PIN_OUTPUT)
setbits32(&iop->dir, pin);
else
clrbits32(&iop->dir, pin);
if (!(flags & CPM_PIN_GPIO))
setbits32(&iop->par, pin);
else
clrbits32(&iop->par, pin);
if (port == CPM_PORTB) {
if (flags & CPM_PIN_OPENDRAIN)
setbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
else
clrbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
}
if (port == CPM_PORTE) {
if (flags & CPM_PIN_SECONDARY)
setbits32(&iop->sor, pin);
else
clrbits32(&iop->sor, pin);
if (flags & CPM_PIN_OPENDRAIN)
setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
else
clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
}
}
static void __init cpm1_set_pin16(int port, int pin, int flags)
{
struct cpm_ioport16 __iomem *iop =
(struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport;
pin = 1 << (15 - pin);
if (port != 0)
iop += port - 1;
if (flags & CPM_PIN_OUTPUT)
setbits16(&iop->dir, pin);
else
clrbits16(&iop->dir, pin);
if (!(flags & CPM_PIN_GPIO))
setbits16(&iop->par, pin);
else
clrbits16(&iop->par, pin);
if (port == CPM_PORTA) {
if (flags & CPM_PIN_OPENDRAIN)
setbits16(&iop->odr_sor, pin);
else
clrbits16(&iop->odr_sor, pin);
}
if (port == CPM_PORTC) {
if (flags & CPM_PIN_SECONDARY)
setbits16(&iop->odr_sor, pin);
else
clrbits16(&iop->odr_sor, pin);
if (flags & CPM_PIN_FALLEDGE)
setbits16(&iop->intr, pin);
else
clrbits16(&iop->intr, pin);
}
}
void __init cpm1_set_pin(enum cpm_port port, int pin, int flags)
{
if (port == CPM_PORTB || port == CPM_PORTE)
cpm1_set_pin32(port, pin, flags);
else
cpm1_set_pin16(port, pin, flags);
}
int __init cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
{
int shift;
int i, bits = 0;
u32 __iomem *reg;
u32 mask = 7;
u8 clk_map[][3] = {
{CPM_CLK_SCC1, CPM_BRG1, 0},
{CPM_CLK_SCC1, CPM_BRG2, 1},
{CPM_CLK_SCC1, CPM_BRG3, 2},
{CPM_CLK_SCC1, CPM_BRG4, 3},
{CPM_CLK_SCC1, CPM_CLK1, 4},
{CPM_CLK_SCC1, CPM_CLK2, 5},
{CPM_CLK_SCC1, CPM_CLK3, 6},
{CPM_CLK_SCC1, CPM_CLK4, 7},
{CPM_CLK_SCC2, CPM_BRG1, 0},
{CPM_CLK_SCC2, CPM_BRG2, 1},
{CPM_CLK_SCC2, CPM_BRG3, 2},
{CPM_CLK_SCC2, CPM_BRG4, 3},
{CPM_CLK_SCC2, CPM_CLK1, 4},
{CPM_CLK_SCC2, CPM_CLK2, 5},
{CPM_CLK_SCC2, CPM_CLK3, 6},
{CPM_CLK_SCC2, CPM_CLK4, 7},
{CPM_CLK_SCC3, CPM_BRG1, 0},
{CPM_CLK_SCC3, CPM_BRG2, 1},
{CPM_CLK_SCC3, CPM_BRG3, 2},
{CPM_CLK_SCC3, CPM_BRG4, 3},
{CPM_CLK_SCC3, CPM_CLK5, 4},
{CPM_CLK_SCC3, CPM_CLK6, 5},
{CPM_CLK_SCC3, CPM_CLK7, 6},
{CPM_CLK_SCC3, CPM_CLK8, 7},
{CPM_CLK_SCC4, CPM_BRG1, 0},
{CPM_CLK_SCC4, CPM_BRG2, 1},
{CPM_CLK_SCC4, CPM_BRG3, 2},
{CPM_CLK_SCC4, CPM_BRG4, 3},
{CPM_CLK_SCC4, CPM_CLK5, 4},
{CPM_CLK_SCC4, CPM_CLK6, 5},
{CPM_CLK_SCC4, CPM_CLK7, 6},
{CPM_CLK_SCC4, CPM_CLK8, 7},
{CPM_CLK_SMC1, CPM_BRG1, 0},
{CPM_CLK_SMC1, CPM_BRG2, 1},
{CPM_CLK_SMC1, CPM_BRG3, 2},
{CPM_CLK_SMC1, CPM_BRG4, 3},
{CPM_CLK_SMC1, CPM_CLK1, 4},
{CPM_CLK_SMC1, CPM_CLK2, 5},
{CPM_CLK_SMC1, CPM_CLK3, 6},
{CPM_CLK_SMC1, CPM_CLK4, 7},
{CPM_CLK_SMC2, CPM_BRG1, 0},
{CPM_CLK_SMC2, CPM_BRG2, 1},
{CPM_CLK_SMC2, CPM_BRG3, 2},
{CPM_CLK_SMC2, CPM_BRG4, 3},
{CPM_CLK_SMC2, CPM_CLK5, 4},
{CPM_CLK_SMC2, CPM_CLK6, 5},
{CPM_CLK_SMC2, CPM_CLK7, 6},
{CPM_CLK_SMC2, CPM_CLK8, 7},
};
switch (target) {
case CPM_CLK_SCC1:
reg = &mpc8xx_immr->im_cpm.cp_sicr;
shift = 0;
break;
case CPM_CLK_SCC2:
reg = &mpc8xx_immr->im_cpm.cp_sicr;
shift = 8;
break;
case CPM_CLK_SCC3:
reg = &mpc8xx_immr->im_cpm.cp_sicr;
shift = 16;
break;
case CPM_CLK_SCC4:
reg = &mpc8xx_immr->im_cpm.cp_sicr;
shift = 24;
break;
case CPM_CLK_SMC1:
reg = &mpc8xx_immr->im_cpm.cp_simode;
shift = 12;
break;
case CPM_CLK_SMC2:
reg = &mpc8xx_immr->im_cpm.cp_simode;
shift = 28;
break;
default:
printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n");
return -EINVAL;
}
for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
if (clk_map[i][0] == target && clk_map[i][1] == clock) {
bits = clk_map[i][2];
break;
}
}
if (i == ARRAY_SIZE(clk_map)) {
printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n");
return -EINVAL;
}
bits <<= shift;
mask <<= shift;
if (reg == &mpc8xx_immr->im_cpm.cp_sicr) {
if (mode == CPM_CLK_RTX) {
bits |= bits << 3;
mask |= mask << 3;
} else if (mode == CPM_CLK_RX) {
bits <<= 3;
mask <<= 3;
}
}
out_be32(reg, (in_be32(reg) & ~mask) | bits);
return 0;
}
/*
* GPIO LIB API implementation
*/
#ifdef CONFIG_8xx_GPIO
struct cpm1_gpio16_chip {
struct of_mm_gpio_chip mm_gc;
spinlock_t lock;
/* shadowed data register to clear/set bits safely */
u16 cpdata;
/* IRQ associated with Pins when relevant */
int irq[16];
};
static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
{
struct cpm1_gpio16_chip *cpm1_gc =
container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
struct cpm_ioport16 __iomem *iop = mm_gc->regs;
cpm1_gc->cpdata = in_be16(&iop->dat);
}
static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct cpm_ioport16 __iomem *iop = mm_gc->regs;
u16 pin_mask;
pin_mask = 1 << (15 - gpio);
return !!(in_be16(&iop->dat) & pin_mask);
}
static void __cpm1_gpio16_set(struct of_mm_gpio_chip *mm_gc, u16 pin_mask,
int value)
{
struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
struct cpm_ioport16 __iomem *iop = mm_gc->regs;
if (value)
cpm1_gc->cpdata |= pin_mask;
else
cpm1_gc->cpdata &= ~pin_mask;
out_be16(&iop->dat, cpm1_gc->cpdata);
}
static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
unsigned long flags;
u16 pin_mask = 1 << (15 - gpio);
spin_lock_irqsave(&cpm1_gc->lock, flags);
__cpm1_gpio16_set(mm_gc, pin_mask, value);
spin_unlock_irqrestore(&cpm1_gc->lock, flags);
}
static int cpm1_gpio16_to_irq(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
return cpm1_gc->irq[gpio] ? : -ENXIO;
}
static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
struct cpm_ioport16 __iomem *iop = mm_gc->regs;
unsigned long flags;
u16 pin_mask = 1 << (15 - gpio);
spin_lock_irqsave(&cpm1_gc->lock, flags);
setbits16(&iop->dir, pin_mask);
__cpm1_gpio16_set(mm_gc, pin_mask, val);
spin_unlock_irqrestore(&cpm1_gc->lock, flags);
return 0;
}
static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
struct cpm_ioport16 __iomem *iop = mm_gc->regs;
unsigned long flags;
u16 pin_mask = 1 << (15 - gpio);
spin_lock_irqsave(&cpm1_gc->lock, flags);
clrbits16(&iop->dir, pin_mask);
spin_unlock_irqrestore(&cpm1_gc->lock, flags);
return 0;
}
int cpm1_gpiochip_add16(struct device *dev)
{
struct device_node *np = dev->of_node;
struct cpm1_gpio16_chip *cpm1_gc;
struct of_mm_gpio_chip *mm_gc;
struct gpio_chip *gc;
u16 mask;
cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
if (!cpm1_gc)
return -ENOMEM;
spin_lock_init(&cpm1_gc->lock);
if (!of_property_read_u16(np, "fsl,cpm1-gpio-irq-mask", &mask)) {
int i, j;
for (i = 0, j = 0; i < 16; i++)
if (mask & (1 << (15 - i)))
cpm1_gc->irq[i] = irq_of_parse_and_map(np, j++);
}
mm_gc = &cpm1_gc->mm_gc;
gc = &mm_gc->gc;
mm_gc->save_regs = cpm1_gpio16_save_regs;
gc->ngpio = 16;
gc->direction_input = cpm1_gpio16_dir_in;
gc->direction_output = cpm1_gpio16_dir_out;
gc->get = cpm1_gpio16_get;
gc->set = cpm1_gpio16_set;
gc->to_irq = cpm1_gpio16_to_irq;
gc->parent = dev;
gc->owner = THIS_MODULE;
return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
}
struct cpm1_gpio32_chip {
struct of_mm_gpio_chip mm_gc;
spinlock_t lock;
/* shadowed data register to clear/set bits safely */
u32 cpdata;
};
static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
{
struct cpm1_gpio32_chip *cpm1_gc =
container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
struct cpm_ioport32b __iomem *iop = mm_gc->regs;
cpm1_gc->cpdata = in_be32(&iop->dat);
}
static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct cpm_ioport32b __iomem *iop = mm_gc->regs;
u32 pin_mask;
pin_mask = 1 << (31 - gpio);
return !!(in_be32(&iop->dat) & pin_mask);
}
static void __cpm1_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
int value)
{
struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
struct cpm_ioport32b __iomem *iop = mm_gc->regs;
if (value)
cpm1_gc->cpdata |= pin_mask;
else
cpm1_gc->cpdata &= ~pin_mask;
out_be32(&iop->dat, cpm1_gc->cpdata);
}
static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
unsigned long flags;
u32 pin_mask = 1 << (31 - gpio);
spin_lock_irqsave(&cpm1_gc->lock, flags);
__cpm1_gpio32_set(mm_gc, pin_mask, value);
spin_unlock_irqrestore(&cpm1_gc->lock, flags);
}
static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
struct cpm_ioport32b __iomem *iop = mm_gc->regs;
unsigned long flags;
u32 pin_mask = 1 << (31 - gpio);
spin_lock_irqsave(&cpm1_gc->lock, flags);
setbits32(&iop->dir, pin_mask);
__cpm1_gpio32_set(mm_gc, pin_mask, val);
spin_unlock_irqrestore(&cpm1_gc->lock, flags);
return 0;
}
static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
struct cpm_ioport32b __iomem *iop = mm_gc->regs;
unsigned long flags;
u32 pin_mask = 1 << (31 - gpio);
spin_lock_irqsave(&cpm1_gc->lock, flags);
clrbits32(&iop->dir, pin_mask);
spin_unlock_irqrestore(&cpm1_gc->lock, flags);
return 0;
}
int cpm1_gpiochip_add32(struct device *dev)
{
struct device_node *np = dev->of_node;
struct cpm1_gpio32_chip *cpm1_gc;
struct of_mm_gpio_chip *mm_gc;
struct gpio_chip *gc;
cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
if (!cpm1_gc)
return -ENOMEM;
spin_lock_init(&cpm1_gc->lock);
mm_gc = &cpm1_gc->mm_gc;
gc = &mm_gc->gc;
mm_gc->save_regs = cpm1_gpio32_save_regs;
gc->ngpio = 32;
gc->direction_input = cpm1_gpio32_dir_in;
gc->direction_output = cpm1_gpio32_dir_out;
gc->get = cpm1_gpio32_get;
gc->set = cpm1_gpio32_set;
gc->parent = dev;
gc->owner = THIS_MODULE;
return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
}
#endif /* CONFIG_8xx_GPIO */