mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 16:29:59 +00:00
![Lee Jones](/assets/img/avatar_default.png)
All lines in the header must start with " *". Fixes the following W=1 kernel build warning(s): drivers/iio/magnetometer/mmc35240.c:304: warning: bad line: compensation for output value. Cc: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
590 lines
14 KiB
C
590 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* MMC35240 - MEMSIC 3-axis Magnetic Sensor
|
|
*
|
|
* Copyright (c) 2015, Intel Corporation.
|
|
*
|
|
* IIO driver for MMC35240 (7-bit I2C slave address 0x30).
|
|
*
|
|
* TODO: offset, ACPI, continuous measurement mode, PM
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/pm.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#define MMC35240_DRV_NAME "mmc35240"
|
|
#define MMC35240_REGMAP_NAME "mmc35240_regmap"
|
|
|
|
#define MMC35240_REG_XOUT_L 0x00
|
|
#define MMC35240_REG_XOUT_H 0x01
|
|
#define MMC35240_REG_YOUT_L 0x02
|
|
#define MMC35240_REG_YOUT_H 0x03
|
|
#define MMC35240_REG_ZOUT_L 0x04
|
|
#define MMC35240_REG_ZOUT_H 0x05
|
|
|
|
#define MMC35240_REG_STATUS 0x06
|
|
#define MMC35240_REG_CTRL0 0x07
|
|
#define MMC35240_REG_CTRL1 0x08
|
|
|
|
#define MMC35240_REG_ID 0x20
|
|
|
|
#define MMC35240_STATUS_MEAS_DONE_BIT BIT(0)
|
|
|
|
#define MMC35240_CTRL0_REFILL_BIT BIT(7)
|
|
#define MMC35240_CTRL0_RESET_BIT BIT(6)
|
|
#define MMC35240_CTRL0_SET_BIT BIT(5)
|
|
#define MMC35240_CTRL0_CMM_BIT BIT(1)
|
|
#define MMC35240_CTRL0_TM_BIT BIT(0)
|
|
|
|
/* output resolution bits */
|
|
#define MMC35240_CTRL1_BW0_BIT BIT(0)
|
|
#define MMC35240_CTRL1_BW1_BIT BIT(1)
|
|
|
|
#define MMC35240_CTRL1_BW_MASK (MMC35240_CTRL1_BW0_BIT | \
|
|
MMC35240_CTRL1_BW1_BIT)
|
|
#define MMC35240_CTRL1_BW_SHIFT 0
|
|
|
|
#define MMC35240_WAIT_CHARGE_PUMP 50000 /* us */
|
|
#define MMC35240_WAIT_SET_RESET 1000 /* us */
|
|
|
|
/*
|
|
* Memsic OTP process code piece is put here for reference:
|
|
*
|
|
* #define OTP_CONVERT(REG) ((float)((REG) >=32 ? (32 - (REG)) : (REG)) * 0.006
|
|
* 1) For X axis, the COEFFICIENT is always 1.
|
|
* 2) For Y axis, the COEFFICIENT is as below:
|
|
* f_OTP_matrix[4] = OTP_CONVERT(((reg_data[1] & 0x03) << 4) |
|
|
* (reg_data[2] >> 4)) + 1.0;
|
|
* 3) For Z axis, the COEFFICIENT is as below:
|
|
* f_OTP_matrix[8] = (OTP_CONVERT(reg_data[3] & 0x3f) + 1) * 1.35;
|
|
* We implemented the OTP logic into driver.
|
|
*/
|
|
|
|
/* scale = 1000 here for Y otp */
|
|
#define MMC35240_OTP_CONVERT_Y(REG) (((REG) >= 32 ? (32 - (REG)) : (REG)) * 6)
|
|
|
|
/* 0.6 * 1.35 = 0.81, scale 10000 for Z otp */
|
|
#define MMC35240_OTP_CONVERT_Z(REG) (((REG) >= 32 ? (32 - (REG)) : (REG)) * 81)
|
|
|
|
#define MMC35240_X_COEFF(x) (x)
|
|
#define MMC35240_Y_COEFF(y) (y + 1000)
|
|
#define MMC35240_Z_COEFF(z) (z + 13500)
|
|
|
|
#define MMC35240_OTP_START_ADDR 0x1B
|
|
|
|
enum mmc35240_resolution {
|
|
MMC35240_16_BITS_SLOW = 0, /* 7.92 ms */
|
|
MMC35240_16_BITS_FAST, /* 4.08 ms */
|
|
MMC35240_14_BITS, /* 2.16 ms */
|
|
MMC35240_12_BITS, /* 1.20 ms */
|
|
};
|
|
|
|
enum mmc35240_axis {
|
|
AXIS_X = 0,
|
|
AXIS_Y,
|
|
AXIS_Z,
|
|
};
|
|
|
|
static const struct {
|
|
int sens[3]; /* sensitivity per X, Y, Z axis */
|
|
int nfo; /* null field output */
|
|
} mmc35240_props_table[] = {
|
|
/* 16 bits, 125Hz ODR */
|
|
{
|
|
{1024, 1024, 1024},
|
|
32768,
|
|
},
|
|
/* 16 bits, 250Hz ODR */
|
|
{
|
|
{1024, 1024, 770},
|
|
32768,
|
|
},
|
|
/* 14 bits, 450Hz ODR */
|
|
{
|
|
{256, 256, 193},
|
|
8192,
|
|
},
|
|
/* 12 bits, 800Hz ODR */
|
|
{
|
|
{64, 64, 48},
|
|
2048,
|
|
},
|
|
};
|
|
|
|
struct mmc35240_data {
|
|
struct i2c_client *client;
|
|
struct mutex mutex;
|
|
struct regmap *regmap;
|
|
enum mmc35240_resolution res;
|
|
|
|
/* OTP compensation */
|
|
int axis_coef[3];
|
|
int axis_scale[3];
|
|
};
|
|
|
|
static const struct {
|
|
int val;
|
|
int val2;
|
|
} mmc35240_samp_freq[] = { {1, 500000},
|
|
{13, 0},
|
|
{25, 0},
|
|
{50, 0} };
|
|
|
|
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("1.5 13 25 50");
|
|
|
|
#define MMC35240_CHANNEL(_axis) { \
|
|
.type = IIO_MAGN, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_ ## _axis, \
|
|
.address = AXIS_ ## _axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
|
|
BIT(IIO_CHAN_INFO_SCALE), \
|
|
}
|
|
|
|
static const struct iio_chan_spec mmc35240_channels[] = {
|
|
MMC35240_CHANNEL(X),
|
|
MMC35240_CHANNEL(Y),
|
|
MMC35240_CHANNEL(Z),
|
|
};
|
|
|
|
static struct attribute *mmc35240_attributes[] = {
|
|
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group mmc35240_attribute_group = {
|
|
.attrs = mmc35240_attributes,
|
|
};
|
|
|
|
static int mmc35240_get_samp_freq_index(struct mmc35240_data *data,
|
|
int val, int val2)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mmc35240_samp_freq); i++)
|
|
if (mmc35240_samp_freq[i].val == val &&
|
|
mmc35240_samp_freq[i].val2 == val2)
|
|
return i;
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mmc35240_hw_set(struct mmc35240_data *data, bool set)
|
|
{
|
|
int ret;
|
|
u8 coil_bit;
|
|
|
|
/*
|
|
* Recharge the capacitor at VCAP pin, requested to be issued
|
|
* before a SET/RESET command.
|
|
*/
|
|
ret = regmap_update_bits(data->regmap, MMC35240_REG_CTRL0,
|
|
MMC35240_CTRL0_REFILL_BIT,
|
|
MMC35240_CTRL0_REFILL_BIT);
|
|
if (ret < 0)
|
|
return ret;
|
|
usleep_range(MMC35240_WAIT_CHARGE_PUMP, MMC35240_WAIT_CHARGE_PUMP + 1);
|
|
|
|
if (set)
|
|
coil_bit = MMC35240_CTRL0_SET_BIT;
|
|
else
|
|
coil_bit = MMC35240_CTRL0_RESET_BIT;
|
|
|
|
return regmap_update_bits(data->regmap, MMC35240_REG_CTRL0,
|
|
coil_bit, coil_bit);
|
|
|
|
}
|
|
|
|
static int mmc35240_init(struct mmc35240_data *data)
|
|
{
|
|
int ret, y_convert, z_convert;
|
|
unsigned int reg_id;
|
|
u8 otp_data[6];
|
|
|
|
ret = regmap_read(data->regmap, MMC35240_REG_ID, ®_id);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading product id\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(&data->client->dev, "MMC35240 chip id %x\n", reg_id);
|
|
|
|
/*
|
|
* make sure we restore sensor characteristics, by doing
|
|
* a SET/RESET sequence, the axis polarity being naturally
|
|
* aligned after RESET
|
|
*/
|
|
ret = mmc35240_hw_set(data, true);
|
|
if (ret < 0)
|
|
return ret;
|
|
usleep_range(MMC35240_WAIT_SET_RESET, MMC35240_WAIT_SET_RESET + 1);
|
|
|
|
ret = mmc35240_hw_set(data, false);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* set default sampling frequency */
|
|
ret = regmap_update_bits(data->regmap, MMC35240_REG_CTRL1,
|
|
MMC35240_CTRL1_BW_MASK,
|
|
data->res << MMC35240_CTRL1_BW_SHIFT);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = regmap_bulk_read(data->regmap, MMC35240_OTP_START_ADDR,
|
|
otp_data, sizeof(otp_data));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
y_convert = MMC35240_OTP_CONVERT_Y(((otp_data[1] & 0x03) << 4) |
|
|
(otp_data[2] >> 4));
|
|
z_convert = MMC35240_OTP_CONVERT_Z(otp_data[3] & 0x3f);
|
|
|
|
data->axis_coef[0] = MMC35240_X_COEFF(1);
|
|
data->axis_coef[1] = MMC35240_Y_COEFF(y_convert);
|
|
data->axis_coef[2] = MMC35240_Z_COEFF(z_convert);
|
|
|
|
data->axis_scale[0] = 1;
|
|
data->axis_scale[1] = 1000;
|
|
data->axis_scale[2] = 10000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc35240_take_measurement(struct mmc35240_data *data)
|
|
{
|
|
int ret, tries = 100;
|
|
unsigned int reg_status;
|
|
|
|
ret = regmap_write(data->regmap, MMC35240_REG_CTRL0,
|
|
MMC35240_CTRL0_TM_BIT);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
while (tries-- > 0) {
|
|
ret = regmap_read(data->regmap, MMC35240_REG_STATUS,
|
|
®_status);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (reg_status & MMC35240_STATUS_MEAS_DONE_BIT)
|
|
break;
|
|
/* minimum wait time to complete measurement is 10 ms */
|
|
usleep_range(10000, 11000);
|
|
}
|
|
|
|
if (tries < 0) {
|
|
dev_err(&data->client->dev, "data not ready\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc35240_read_measurement(struct mmc35240_data *data, __le16 buf[3])
|
|
{
|
|
int ret;
|
|
|
|
ret = mmc35240_take_measurement(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return regmap_bulk_read(data->regmap, MMC35240_REG_XOUT_L, buf,
|
|
3 * sizeof(__le16));
|
|
}
|
|
|
|
/**
|
|
* mmc35240_raw_to_mgauss - convert raw readings to milli gauss. Also apply
|
|
* compensation for output value.
|
|
*
|
|
* @data: device private data
|
|
* @index: axis index for which we want the conversion
|
|
* @buf: raw data to be converted, 2 bytes in little endian format
|
|
* @val: compensated output reading (unit is milli gauss)
|
|
*
|
|
* Returns: 0 in case of success, -EINVAL when @index is not valid
|
|
*/
|
|
static int mmc35240_raw_to_mgauss(struct mmc35240_data *data, int index,
|
|
__le16 buf[], int *val)
|
|
{
|
|
int raw[3];
|
|
int sens[3];
|
|
int nfo;
|
|
|
|
raw[AXIS_X] = le16_to_cpu(buf[AXIS_X]);
|
|
raw[AXIS_Y] = le16_to_cpu(buf[AXIS_Y]);
|
|
raw[AXIS_Z] = le16_to_cpu(buf[AXIS_Z]);
|
|
|
|
sens[AXIS_X] = mmc35240_props_table[data->res].sens[AXIS_X];
|
|
sens[AXIS_Y] = mmc35240_props_table[data->res].sens[AXIS_Y];
|
|
sens[AXIS_Z] = mmc35240_props_table[data->res].sens[AXIS_Z];
|
|
|
|
nfo = mmc35240_props_table[data->res].nfo;
|
|
|
|
switch (index) {
|
|
case AXIS_X:
|
|
*val = (raw[AXIS_X] - nfo) * 1000 / sens[AXIS_X];
|
|
break;
|
|
case AXIS_Y:
|
|
*val = (raw[AXIS_Y] - nfo) * 1000 / sens[AXIS_Y] -
|
|
(raw[AXIS_Z] - nfo) * 1000 / sens[AXIS_Z];
|
|
break;
|
|
case AXIS_Z:
|
|
*val = (raw[AXIS_Y] - nfo) * 1000 / sens[AXIS_Y] +
|
|
(raw[AXIS_Z] - nfo) * 1000 / sens[AXIS_Z];
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
/* apply OTP compensation */
|
|
*val = (*val) * data->axis_coef[index] / data->axis_scale[index];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc35240_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
struct mmc35240_data *data = iio_priv(indio_dev);
|
|
int ret, i;
|
|
unsigned int reg;
|
|
__le16 buf[3];
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
mutex_lock(&data->mutex);
|
|
ret = mmc35240_read_measurement(data, buf);
|
|
mutex_unlock(&data->mutex);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = mmc35240_raw_to_mgauss(data, chan->address, buf, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = 0;
|
|
*val2 = 1000;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
mutex_lock(&data->mutex);
|
|
ret = regmap_read(data->regmap, MMC35240_REG_CTRL1, ®);
|
|
mutex_unlock(&data->mutex);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
i = (reg & MMC35240_CTRL1_BW_MASK) >> MMC35240_CTRL1_BW_SHIFT;
|
|
if (i < 0 || i >= ARRAY_SIZE(mmc35240_samp_freq))
|
|
return -EINVAL;
|
|
|
|
*val = mmc35240_samp_freq[i].val;
|
|
*val2 = mmc35240_samp_freq[i].val2;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int mmc35240_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int val,
|
|
int val2, long mask)
|
|
{
|
|
struct mmc35240_data *data = iio_priv(indio_dev);
|
|
int i, ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
i = mmc35240_get_samp_freq_index(data, val, val2);
|
|
if (i < 0)
|
|
return -EINVAL;
|
|
mutex_lock(&data->mutex);
|
|
ret = regmap_update_bits(data->regmap, MMC35240_REG_CTRL1,
|
|
MMC35240_CTRL1_BW_MASK,
|
|
i << MMC35240_CTRL1_BW_SHIFT);
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_info mmc35240_info = {
|
|
.read_raw = mmc35240_read_raw,
|
|
.write_raw = mmc35240_write_raw,
|
|
.attrs = &mmc35240_attribute_group,
|
|
};
|
|
|
|
static bool mmc35240_is_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MMC35240_REG_CTRL0:
|
|
case MMC35240_REG_CTRL1:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool mmc35240_is_readable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MMC35240_REG_XOUT_L:
|
|
case MMC35240_REG_XOUT_H:
|
|
case MMC35240_REG_YOUT_L:
|
|
case MMC35240_REG_YOUT_H:
|
|
case MMC35240_REG_ZOUT_L:
|
|
case MMC35240_REG_ZOUT_H:
|
|
case MMC35240_REG_STATUS:
|
|
case MMC35240_REG_ID:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool mmc35240_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MMC35240_REG_CTRL0:
|
|
case MMC35240_REG_CTRL1:
|
|
return false;
|
|
default:
|
|
return true;
|
|
}
|
|
}
|
|
|
|
static const struct reg_default mmc35240_reg_defaults[] = {
|
|
{ MMC35240_REG_CTRL0, 0x00 },
|
|
{ MMC35240_REG_CTRL1, 0x00 },
|
|
};
|
|
|
|
static const struct regmap_config mmc35240_regmap_config = {
|
|
.name = MMC35240_REGMAP_NAME,
|
|
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = MMC35240_REG_ID,
|
|
.cache_type = REGCACHE_FLAT,
|
|
|
|
.writeable_reg = mmc35240_is_writeable_reg,
|
|
.readable_reg = mmc35240_is_readable_reg,
|
|
.volatile_reg = mmc35240_is_volatile_reg,
|
|
|
|
.reg_defaults = mmc35240_reg_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(mmc35240_reg_defaults),
|
|
};
|
|
|
|
static int mmc35240_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct mmc35240_data *data;
|
|
struct iio_dev *indio_dev;
|
|
struct regmap *regmap;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
regmap = devm_regmap_init_i2c(client, &mmc35240_regmap_config);
|
|
if (IS_ERR(regmap)) {
|
|
dev_err(&client->dev, "regmap initialization failed\n");
|
|
return PTR_ERR(regmap);
|
|
}
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
data->regmap = regmap;
|
|
data->res = MMC35240_16_BITS_SLOW;
|
|
|
|
mutex_init(&data->mutex);
|
|
|
|
indio_dev->info = &mmc35240_info;
|
|
indio_dev->name = MMC35240_DRV_NAME;
|
|
indio_dev->channels = mmc35240_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(mmc35240_channels);
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
ret = mmc35240_init(data);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "mmc35240 chip init failed\n");
|
|
return ret;
|
|
}
|
|
return devm_iio_device_register(&client->dev, indio_dev);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int mmc35240_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct mmc35240_data *data = iio_priv(indio_dev);
|
|
|
|
regcache_cache_only(data->regmap, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc35240_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct mmc35240_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
regcache_mark_dirty(data->regmap);
|
|
ret = regcache_sync_region(data->regmap, MMC35240_REG_CTRL0,
|
|
MMC35240_REG_CTRL1);
|
|
if (ret < 0)
|
|
dev_err(dev, "Failed to restore control registers\n");
|
|
|
|
regcache_cache_only(data->regmap, false);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops mmc35240_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(mmc35240_suspend, mmc35240_resume)
|
|
};
|
|
|
|
static const struct of_device_id mmc35240_of_match[] = {
|
|
{ .compatible = "memsic,mmc35240", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mmc35240_of_match);
|
|
|
|
static const struct acpi_device_id mmc35240_acpi_match[] = {
|
|
{"MMC35240", 0},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, mmc35240_acpi_match);
|
|
|
|
static const struct i2c_device_id mmc35240_id[] = {
|
|
{"mmc35240", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mmc35240_id);
|
|
|
|
static struct i2c_driver mmc35240_driver = {
|
|
.driver = {
|
|
.name = MMC35240_DRV_NAME,
|
|
.of_match_table = mmc35240_of_match,
|
|
.pm = &mmc35240_pm_ops,
|
|
.acpi_match_table = ACPI_PTR(mmc35240_acpi_match),
|
|
},
|
|
.probe = mmc35240_probe,
|
|
.id_table = mmc35240_id,
|
|
};
|
|
|
|
module_i2c_driver(mmc35240_driver);
|
|
|
|
MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
|
|
MODULE_DESCRIPTION("MEMSIC MMC35240 magnetic sensor driver");
|
|
MODULE_LICENSE("GPL v2");
|