linux-stable/arch/powerpc/include/asm/page.h
Linus Torvalds 7794b1d418 powerpc updates for 5.5
Highlights:
 
  - Infrastructure for secure boot on some bare metal Power9 machines. The
    firmware support is still in development, so the code here won't actually
    activate secure boot on any existing systems.
 
  - A change to xmon (our crash handler / pseudo-debugger) to restrict it to
    read-only mode when the kernel is lockdown'ed, otherwise it's trivial to drop
    into xmon and modify kernel data, such as the lockdown state.
 
  - Support for KASLR on 32-bit BookE machines (Freescale / NXP).
 
  - Fixes for our flush_icache_range() and __kernel_sync_dicache() (VDSO) to work
    with memory ranges >4GB.
 
  - Some reworks of the pseries CMM (Cooperative Memory Management) driver to
    make it behave more like other balloon drivers and enable some cleanups of
    generic mm code.
 
  - A series of fixes to our hardware breakpoint support to properly handle
    unaligned watchpoint addresses.
 
 Plus a bunch of other smaller improvements, fixes and cleanups.
 
 Thanks to:
   Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V, Anthony Steinhauser,
   Cédric Le Goater, Chris Packham, Chris Smart, Christophe Leroy, Christopher M.
   Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Hildenbrand,
   Deb McLemore, Diana Craciun, Eric Richter, Geert Uytterhoeven, Greg
   Kroah-Hartman, Greg Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason
   Yan, Krzysztof Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M.
   Rodrigues, Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna
   Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes, Ravi
   Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth, Tyrel
   Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl3hBycTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgApBEACk91MEQDYJ9MF9I6uN+85qb5p4pMsp
 rGzqnpt+XFidbDAc3eP63pYfIDSo3jtkQ2YL7shAnDOTvkO0md+Vqkl9Aq/G6FIf
 lDBlwbgkXMSxS/O2Lpvfn4NZAoK6dKmiV55LSgfliM62X3e2Saeg6TR55wBTgJ6/
 SlYPDwZfcVHOAiFS3UmfB+hkiIZk+AI5Zr5VAZvT2ZmeH36yAWkq4JgJI1uAk6m1
 /7iCnlfUjx/nl/BhnA3kjjmAgGCJ5s/WuVgwFMz47XpMBWGBhLWpMh/NqDTFb8ca
 kpiVQoVPQe2xyO3pL/kOwBy6sii26ftfHDhLKMy1hJdEhVQzS5LerPIMeh1qsU8Q
 hV/Cj+jfsrS/vBDOehj3jwx93t+861PmTOqgLnpYQ6Ltrt+2B/74+fufGMHE1kI3
 Ffo7xvNw4sw6bSziDxDFqUx2P1dFN5D5EJsJsYM98ekkVAAkzNqCDRvfD2QI8Pif
 VXWPYXqtNJTrVPJA0D7Yfo9FDNwhANd0f1zi7r/U5mVXBFUyKOlGqTQSkXgMrVeK
 3I7wHPOVGgdA5UUkfcd3pcuqsY081U9E//o5PUfj8ybO5JCwly8NoatbG+xHmKia
 a72uJT8MjCo9mGCHKDrwi9l/kqms6ZSv8RP+yMhGuB52YoiGc6PpVyab5jXIUd1N
 yTtBlC0YGW1JYw==
 =JHzg
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights:

   - Infrastructure for secure boot on some bare metal Power9 machines.
     The firmware support is still in development, so the code here
     won't actually activate secure boot on any existing systems.

   - A change to xmon (our crash handler / pseudo-debugger) to restrict
     it to read-only mode when the kernel is lockdown'ed, otherwise it's
     trivial to drop into xmon and modify kernel data, such as the
     lockdown state.

   - Support for KASLR on 32-bit BookE machines (Freescale / NXP).

   - Fixes for our flush_icache_range() and __kernel_sync_dicache()
     (VDSO) to work with memory ranges >4GB.

   - Some reworks of the pseries CMM (Cooperative Memory Management)
     driver to make it behave more like other balloon drivers and enable
     some cleanups of generic mm code.

   - A series of fixes to our hardware breakpoint support to properly
     handle unaligned watchpoint addresses.

  Plus a bunch of other smaller improvements, fixes and cleanups.

  Thanks to: Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V,
  Anthony Steinhauser, Cédric Le Goater, Chris Packham, Chris Smart,
  Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio
  Carvalho, Daniel Axtens, David Hildenbrand, Deb McLemore, Diana
  Craciun, Eric Richter, Geert Uytterhoeven, Greg Kroah-Hartman, Greg
  Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason Yan, Krzysztof
  Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M. Rodrigues,
  Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna
  Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes,
  Ravi Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth,
  Tyrel Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing"

* tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (144 commits)
  powerpc/fixmap: fix crash with HIGHMEM
  x86/efi: remove unused variables
  powerpc: Define arch_is_kernel_initmem_freed() for lockdep
  powerpc/prom_init: Use -ffreestanding to avoid a reference to bcmp
  powerpc: Avoid clang warnings around setjmp and longjmp
  powerpc: Don't add -mabi= flags when building with Clang
  powerpc: Fix Kconfig indentation
  powerpc/fixmap: don't clear fixmap area in paging_init()
  selftests/powerpc: spectre_v2 test must be built 64-bit
  powerpc/powernv: Disable native PCIe port management
  powerpc/kexec: Move kexec files into a dedicated subdir.
  powerpc/32: Split kexec low level code out of misc_32.S
  powerpc/sysdev: drop simple gpio
  powerpc/83xx: map IMMR with a BAT.
  powerpc/32s: automatically allocate BAT in setbat()
  powerpc/ioremap: warn on early use of ioremap()
  powerpc: Add support for GENERIC_EARLY_IOREMAP
  powerpc/fixmap: Use __fix_to_virt() instead of fix_to_virt()
  powerpc/8xx: use the fixmapped IMMR in cpm_reset()
  powerpc/8xx: add __init to cpm1 init functions
  ...
2019-11-30 14:35:43 -08:00

339 lines
10 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later */
#ifndef _ASM_POWERPC_PAGE_H
#define _ASM_POWERPC_PAGE_H
/*
* Copyright (C) 2001,2005 IBM Corporation.
*/
#ifndef __ASSEMBLY__
#include <linux/types.h>
#include <linux/kernel.h>
#else
#include <asm/types.h>
#endif
#include <asm/asm-const.h>
/*
* On regular PPC32 page size is 4K (but we support 4K/16K/64K/256K pages
* on PPC44x and 4K/16K on 8xx). For PPC64 we support either 4K or 64K software
* page size. When using 64K pages however, whether we are really supporting
* 64K pages in HW or not is irrelevant to those definitions.
*/
#define PAGE_SHIFT CONFIG_PPC_PAGE_SHIFT
#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT)
#ifndef __ASSEMBLY__
#ifndef CONFIG_HUGETLB_PAGE
#define HPAGE_SHIFT PAGE_SHIFT
#elif defined(CONFIG_PPC_BOOK3S_64)
extern unsigned int hpage_shift;
#define HPAGE_SHIFT hpage_shift
#elif defined(CONFIG_PPC_8xx)
#define HPAGE_SHIFT 19 /* 512k pages */
#elif defined(CONFIG_PPC_FSL_BOOK3E)
#define HPAGE_SHIFT 22 /* 4M pages */
#endif
#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
#define HPAGE_MASK (~(HPAGE_SIZE - 1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
#define HUGE_MAX_HSTATE (MMU_PAGE_COUNT-1)
#endif
/*
* Subtle: (1 << PAGE_SHIFT) is an int, not an unsigned long. So if we
* assign PAGE_MASK to a larger type it gets extended the way we want
* (i.e. with 1s in the high bits)
*/
#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
/*
* KERNELBASE is the virtual address of the start of the kernel, it's often
* the same as PAGE_OFFSET, but _might not be_.
*
* The kdump dump kernel is one example where KERNELBASE != PAGE_OFFSET.
*
* PAGE_OFFSET is the virtual address of the start of lowmem.
*
* PHYSICAL_START is the physical address of the start of the kernel.
*
* MEMORY_START is the physical address of the start of lowmem.
*
* KERNELBASE, PAGE_OFFSET, and PHYSICAL_START are all configurable on
* ppc32 and based on how they are set we determine MEMORY_START.
*
* For the linear mapping the following equation should be true:
* KERNELBASE - PAGE_OFFSET = PHYSICAL_START - MEMORY_START
*
* Also, KERNELBASE >= PAGE_OFFSET and PHYSICAL_START >= MEMORY_START
*
* There are two ways to determine a physical address from a virtual one:
* va = pa + PAGE_OFFSET - MEMORY_START
* va = pa + KERNELBASE - PHYSICAL_START
*
* If you want to know something's offset from the start of the kernel you
* should subtract KERNELBASE.
*
* If you want to test if something's a kernel address, use is_kernel_addr().
*/
#define KERNELBASE ASM_CONST(CONFIG_KERNEL_START)
#define PAGE_OFFSET ASM_CONST(CONFIG_PAGE_OFFSET)
#define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START))
#if defined(CONFIG_NONSTATIC_KERNEL)
#ifndef __ASSEMBLY__
extern phys_addr_t memstart_addr;
extern phys_addr_t kernstart_addr;
#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_PPC32)
extern long long virt_phys_offset;
#endif
#endif /* __ASSEMBLY__ */
#define PHYSICAL_START kernstart_addr
#else /* !CONFIG_NONSTATIC_KERNEL */
#define PHYSICAL_START ASM_CONST(CONFIG_PHYSICAL_START)
#endif
/* See Description below for VIRT_PHYS_OFFSET */
#if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE)
#ifdef CONFIG_RELOCATABLE
#define VIRT_PHYS_OFFSET virt_phys_offset
#else
#define VIRT_PHYS_OFFSET (KERNELBASE - PHYSICAL_START)
#endif
#endif
#ifdef CONFIG_PPC64
#define MEMORY_START 0UL
#elif defined(CONFIG_NONSTATIC_KERNEL)
#define MEMORY_START memstart_addr
#else
#define MEMORY_START (PHYSICAL_START + PAGE_OFFSET - KERNELBASE)
#endif
#ifdef CONFIG_FLATMEM
#define ARCH_PFN_OFFSET ((unsigned long)(MEMORY_START >> PAGE_SHIFT))
#ifndef __ASSEMBLY__
extern unsigned long max_mapnr;
static inline bool pfn_valid(unsigned long pfn)
{
unsigned long min_pfn = ARCH_PFN_OFFSET;
return pfn >= min_pfn && pfn < max_mapnr;
}
#endif
#endif
#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
#define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
#define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr))
/*
* On Book-E parts we need __va to parse the device tree and we can't
* determine MEMORY_START until then. However we can determine PHYSICAL_START
* from information at hand (program counter, TLB lookup).
*
* On BookE with RELOCATABLE && PPC32
*
* With RELOCATABLE && PPC32, we support loading the kernel at any physical
* address without any restriction on the page alignment.
*
* We find the runtime address of _stext and relocate ourselves based on
* the following calculation:
*
* virtual_base = ALIGN_DOWN(KERNELBASE,256M) +
* MODULO(_stext.run,256M)
* and create the following mapping:
*
* ALIGN_DOWN(_stext.run,256M) => ALIGN_DOWN(KERNELBASE,256M)
*
* When we process relocations, we cannot depend on the
* existing equation for the __va()/__pa() translations:
*
* __va(x) = (x) - PHYSICAL_START + KERNELBASE
*
* Where:
* PHYSICAL_START = kernstart_addr = Physical address of _stext
* KERNELBASE = Compiled virtual address of _stext.
*
* This formula holds true iff, kernel load address is TLB page aligned.
*
* In our case, we need to also account for the shift in the kernel Virtual
* address.
*
* E.g.,
*
* Let the kernel be loaded at 64MB and KERNELBASE be 0xc0000000 (same as PAGE_OFFSET).
* In this case, we would be mapping 0 to 0xc0000000, and kernstart_addr = 64M
*
* Now __va(1MB) = (0x100000) - (0x4000000) + 0xc0000000
* = 0xbc100000 , which is wrong.
*
* Rather, it should be : 0xc0000000 + 0x100000 = 0xc0100000
* according to our mapping.
*
* Hence we use the following formula to get the translations right:
*
* __va(x) = (x) - [ PHYSICAL_START - Effective KERNELBASE ]
*
* Where :
* PHYSICAL_START = dynamic load address.(kernstart_addr variable)
* Effective KERNELBASE = virtual_base =
* = ALIGN_DOWN(KERNELBASE,256M) +
* MODULO(PHYSICAL_START,256M)
*
* To make the cost of __va() / __pa() more light weight, we introduce
* a new variable virt_phys_offset, which will hold :
*
* virt_phys_offset = Effective KERNELBASE - PHYSICAL_START
* = ALIGN_DOWN(KERNELBASE,256M) -
* ALIGN_DOWN(PHYSICALSTART,256M)
*
* Hence :
*
* __va(x) = x - PHYSICAL_START + Effective KERNELBASE
* = x + virt_phys_offset
*
* and
* __pa(x) = x + PHYSICAL_START - Effective KERNELBASE
* = x - virt_phys_offset
*
* On non-Book-E PPC64 PAGE_OFFSET and MEMORY_START are constants so use
* the other definitions for __va & __pa.
*/
#if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE)
#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + VIRT_PHYS_OFFSET))
#define __pa(x) ((unsigned long)(x) - VIRT_PHYS_OFFSET)
#else
#ifdef CONFIG_PPC64
/*
* gcc miscompiles (unsigned long)(&static_var) - PAGE_OFFSET
* with -mcmodel=medium, so we use & and | instead of - and + on 64-bit.
* This also results in better code generation.
*/
#define __va(x) \
({ \
VIRTUAL_BUG_ON((unsigned long)(x) >= PAGE_OFFSET); \
(void *)(unsigned long)((phys_addr_t)(x) | PAGE_OFFSET); \
})
#define __pa(x) \
({ \
VIRTUAL_BUG_ON((unsigned long)(x) < PAGE_OFFSET); \
(unsigned long)(x) & 0x0fffffffffffffffUL; \
})
#else /* 32-bit, non book E */
#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + PAGE_OFFSET - MEMORY_START))
#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + MEMORY_START)
#endif
#endif
/*
* Unfortunately the PLT is in the BSS in the PPC32 ELF ABI,
* and needs to be executable. This means the whole heap ends
* up being executable.
*/
#define VM_DATA_DEFAULT_FLAGS32 \
(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
VM_READ | VM_WRITE | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
#define VM_DATA_DEFAULT_FLAGS64 (VM_READ | VM_WRITE | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
#ifdef __powerpc64__
#include <asm/page_64.h>
#else
#include <asm/page_32.h>
#endif
/* align addr on a size boundary - adjust address up/down if needed */
#define _ALIGN_UP(addr, size) __ALIGN_KERNEL(addr, size)
#define _ALIGN_DOWN(addr, size) ((addr)&(~((typeof(addr))(size)-1)))
/* align addr on a size boundary - adjust address up if needed */
#define _ALIGN(addr,size) _ALIGN_UP(addr,size)
/*
* Don't compare things with KERNELBASE or PAGE_OFFSET to test for
* "kernelness", use is_kernel_addr() - it should do what you want.
*/
#ifdef CONFIG_PPC_BOOK3E_64
#define is_kernel_addr(x) ((x) >= 0x8000000000000000ul)
#else
#define is_kernel_addr(x) ((x) >= PAGE_OFFSET)
#endif
#ifndef CONFIG_PPC_BOOK3S_64
/*
* Use the top bit of the higher-level page table entries to indicate whether
* the entries we point to contain hugepages. This works because we know that
* the page tables live in kernel space. If we ever decide to support having
* page tables at arbitrary addresses, this breaks and will have to change.
*/
#ifdef CONFIG_PPC64
#define PD_HUGE 0x8000000000000000UL
#else
#define PD_HUGE 0x80000000
#endif
#else /* CONFIG_PPC_BOOK3S_64 */
/*
* Book3S 64 stores real addresses in the hugepd entries to
* avoid overlaps with _PAGE_PRESENT and _PAGE_PTE.
*/
#define HUGEPD_ADDR_MASK (0x0ffffffffffffffful & ~HUGEPD_SHIFT_MASK)
#endif /* CONFIG_PPC_BOOK3S_64 */
/*
* Some number of bits at the level of the page table that points to
* a hugepte are used to encode the size. This masks those bits.
*/
#define HUGEPD_SHIFT_MASK 0x3f
#ifndef __ASSEMBLY__
#ifdef CONFIG_PPC_BOOK3S_64
#include <asm/pgtable-be-types.h>
#else
#include <asm/pgtable-types.h>
#endif
#ifndef CONFIG_HUGETLB_PAGE
#define is_hugepd(pdep) (0)
#define pgd_huge(pgd) (0)
#endif /* CONFIG_HUGETLB_PAGE */
struct page;
extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
extern void copy_user_page(void *to, void *from, unsigned long vaddr,
struct page *p);
extern int devmem_is_allowed(unsigned long pfn);
#ifdef CONFIG_PPC_SMLPAR
void arch_free_page(struct page *page, int order);
#define HAVE_ARCH_FREE_PAGE
#endif
struct vm_area_struct;
extern unsigned long kernstart_virt_addr;
static inline unsigned long kaslr_offset(void)
{
return kernstart_virt_addr - KERNELBASE;
}
#include <asm-generic/memory_model.h>
#endif /* __ASSEMBLY__ */
#include <asm/slice.h>
#endif /* _ASM_POWERPC_PAGE_H */