linux-stable/include/linux/gpio.h
Felipe Balbi c4b5be98fe gpiolib: introduce set_debounce method
A few architectures, like OMAP, allow you to set a debouncing time for the
gpio before generating the IRQ.  Teach gpiolib about that.

Mark said:
: This would be generally useful for embedded systems, especially where
: the interrupt concerned is a wake source.  It allows drivers to avoid
: spurious interrupts from noisy sources so if the hardware supports it
: the driver can avoid having to explicitly wait for the signal to become
: stable and software has to cope with fewer events.  We've lived without
: it for quite some time, though.

David said:
: I looked at adding debounce support to the generic GPIO calls (and thus
: gpiolib) some time back, but decided against it.  I forget why at this
: time (check list archives) but it wasn't because of lack of utility in
: certain contexts.
:
: One thing to watch out for is just how variable the hardware capabilities
: are.  Atmel GPIOs have something like a fixed number of 32K clock cycles
: for debounce, twl4030 had something odd, OMAPs were more like the Atmel
: chips but with a different clock.  In some cases debouncing had to be
: ganged, not per-GPIO.  And so forth.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: David Brownell <david-b@pacbell.net>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:42 -07:00

136 lines
2.6 KiB
C

#ifndef __LINUX_GPIO_H
#define __LINUX_GPIO_H
/* see Documentation/gpio.txt */
#ifdef CONFIG_GENERIC_GPIO
#include <asm/gpio.h>
#else
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/errno.h>
struct device;
/*
* Some platforms don't support the GPIO programming interface.
*
* In case some driver uses it anyway (it should normally have
* depended on GENERIC_GPIO), these routines help the compiler
* optimize out much GPIO-related code ... or trigger a runtime
* warning when something is wrongly called.
*/
static inline int gpio_is_valid(int number)
{
return 0;
}
static inline int gpio_request(unsigned gpio, const char *label)
{
return -ENOSYS;
}
static inline void gpio_free(unsigned gpio)
{
might_sleep();
/* GPIO can never have been requested */
WARN_ON(1);
}
static inline int gpio_direction_input(unsigned gpio)
{
return -ENOSYS;
}
static inline int gpio_direction_output(unsigned gpio, int value)
{
return -ENOSYS;
}
static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
{
return -ENOSYS;
}
static inline int gpio_get_value(unsigned gpio)
{
/* GPIO can never have been requested or set as {in,out}put */
WARN_ON(1);
return 0;
}
static inline void gpio_set_value(unsigned gpio, int value)
{
/* GPIO can never have been requested or set as output */
WARN_ON(1);
}
static inline int gpio_cansleep(unsigned gpio)
{
/* GPIO can never have been requested or set as {in,out}put */
WARN_ON(1);
return 0;
}
static inline int gpio_get_value_cansleep(unsigned gpio)
{
/* GPIO can never have been requested or set as {in,out}put */
WARN_ON(1);
return 0;
}
static inline void gpio_set_value_cansleep(unsigned gpio, int value)
{
/* GPIO can never have been requested or set as output */
WARN_ON(1);
}
static inline int gpio_export(unsigned gpio, bool direction_may_change)
{
/* GPIO can never have been requested or set as {in,out}put */
WARN_ON(1);
return -EINVAL;
}
static inline int gpio_export_link(struct device *dev, const char *name,
unsigned gpio)
{
/* GPIO can never have been exported */
WARN_ON(1);
return -EINVAL;
}
static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
{
/* GPIO can never have been requested */
WARN_ON(1);
return -EINVAL;
}
static inline void gpio_unexport(unsigned gpio)
{
/* GPIO can never have been exported */
WARN_ON(1);
}
static inline int gpio_to_irq(unsigned gpio)
{
/* GPIO can never have been requested or set as input */
WARN_ON(1);
return -EINVAL;
}
static inline int irq_to_gpio(unsigned irq)
{
/* irq can never have been returned from gpio_to_irq() */
WARN_ON(1);
return -EINVAL;
}
#endif
#endif /* __LINUX_GPIO_H */